Can't connect to my wifi network

I have an Orange broadband Inventel Livebox.
I take it when the iPhone asks for the password, I should be typing in the WEP key?
I tried this, and pushed the 'mating' button on the livebox but it still wont connect.
Am I missing something?
Cheers

Sorta similar problem...I'm using Linksys. I have up to 4 laptops all connecting properly through the wireless network (no security key...I know, I know....). When we select the wireless network on the iPhone, we get an IP address and it looks like it connects fine. But we cannot get any safari to open up web sites consistently. Sometimes, some website open fine...particularly the apple.com site (go figure!!). But sites such as google.com or yahoo.com won't download. We'll get the message...Safari cannot contact server (may be a different message...i don't have my iPhone with me now). But the point is, there are times I can open a page when connected to my wireless and i will immediately try to open another page from another well known web site and it won't work. If I switch back the The Edge, it works fine. And btw, anytime I experience this problem on my iPhone, I check one of the laptops and they're ALWAYS able to connect. I don't think it's my router since all the laptops work. It just seems that the iPhone doesn't like to talk to my network for some reason. Is there any known issues with Linksys and the iPhone? I know Linksys (cisco) has their own iPhone...I wonder if there's something weired going on there.

Similar Messages

Can't Connect to any WiFi network

I just got my iPhone yesterday and I'm already having a serious problem,I can't connect to any WiFi networks.
I can see the networks around me and I can select networks that I've setup and I know are open or I know the security passwords, I can even enter the network passwords for the ones that require them and it accepts them without complaint. When I select a network I get a little check mark next to that network which I assumes means it should be connected to that network. However, the iPhone never actually connects to them, i.e. no IP address, no router no nothing in the network settings screen for each network, and always appears to the using the Edge wireless network when accessing the internet.
I've tried DHCP and static IP but neither works.
I updated the phones software to 1.1.4, has anybody reported problems like this with this or any version of the software.
Any help would be much appriciated.
If I can't get this resolved today I'm returning to the AT&T store tonight for a new one.
Thanks
Matt S.

theevilone,
I have personally used an iPhone with routers from D-Link, Netgear, Linksys, Apple and Belkin.
Some routers, regardless of manufacturer need to have their firmware updated. Generally speaking if you look at the release notes, the same updates that resolve issues with DHCP for game systems and PDAs, also resolves them for the iPhone.
In addition hardware or MAC address filtering can cause issues where you connect to the network and not get DHCP.
Hope this helps,
Nathan C.

TS1398 Update iPhone 4s to 6.1.3 (10B329) now I can't connect to any wifi networks at home or at work and all car Bluetooth systems will not connect either. Help! Extremely annoyed at apple for putting out software that causes such mayhem.

My iPhone 4s has been update as I said in subject bar.. Now can't connect to any of my cars Bluetooth systems. Also even more frustratingly can't connect to any wifi networks at home or work!!
How can apple put out such an update that causes so much grief and inconvenience to hundreds of people. Not to mention risking lives with Bluetooth kits not working...outraged!!!!!!

First, grow up. Just because YOUR phone isn't working, doesn't mean Apple put out bad software. I've not had any difficulty, nor has anyone else I know. And just how is Apple risking lives with Bluetooth kits not working? It's YOUR decision to talk on the phone or text and drive. Not Apple's.
We're users here, volunteering our time to help others. Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help. Not to mention, it makes you look absolutely foolish.
Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
Good luck getting help.
GDG

Can't connect to other Wifi networks although it works at home

My curve is configured to 'wifi preferred' and shows UMA signal when in my home - using BT Home Hub. Recently I tried to connect to a hotel wifi and my mum's Orange Livebox. Both are now stored on my BB as available connections but Active WiFi connection is showing 'none'. I can't work out how to get it using the Wifi instead of my data plan.
I've read some threads recommending 'hotspot' setting but not sure if this will restrict me to WiFi only? Of course, I would like it to automatically switch back to my BT hub once home. Have done battery pull but no different.
Am at my mum's at the moment if anyone can help please!
Thanks.

Some hotspots require you to log in before you can actually access the internet. Once you do a scan, and connect to the wifi network then you need to open the browser, and go to the Bookmark screen and click on "wifi hotspot login."
Not every wifi network is compatible with every device so some hotspots just may not work.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Can't connect to a wifi network with a wep keyid 2

Hi,
how do you connect to a wifi network with wep but the keyid is 2, i can't find an option.
i put the password, in asci and in hexa, and the answer "can't connect to the network" a xp near got connected after changing the key id in configs :((
did i miss something?
thanks for help

I am relatively new to Mac's, as at 40 having had IBM/Windows compatibles since I was 14 (8086 woot!), I am still learning.
However, I believe the answer is that you must use Key 1. I don't believe OSX offers the chance to use any others. However, in case I am wrong, try putting a $ before the WEP passphrase, but again, I think it only uses Key 1.
Hope that helps,
Jesrael
Macbook 1.8 Core 2 Duo Mac OS X (10.4.9) 2GB Ram

How can i connect to a wifi network with no internet connection?

I used to be able to connect my Z10 to a wifi network even when the network had no Internet connectivity when i got my phone in Feb. 2013 (10.0) However ever since the 10.1 update this has stopped working. I cannot connect to my wifi network when there is no Internet connection. I cannot play videos / music from my phone to my tv/music system or connect to my laptop. However my laptop and tv communicate just fine through the same network.
Can anyone recommend anything for this?

nikhildhoot wrote:
I used to be able to connect my Z10 to a wifi network even when the network had no Internet connectivity when i got my phone in Feb. 2013 (10.0) However ever since the 10.1 update this has stopped working. I cannot connect to my wifi network when there is no Internet connection. I cannot play videos / music from my phone to my tv/music system or connect to my laptop. However my laptop and tv communicate just fine through the same network.
Can anyone recommend anything for this?
Your saved wifi networks should connect automatically whether internet is available or not, you may receive a notification "there appears to be no internet connection".
Update to 10.2, if not available from your carrier then use Sachesi (see other threads).

HT1695 I can't connect to my wifi network not even when it has no security on I get "unable to connect to network "netgear" anyone have this issue and maybe know how to fix it?

Hi
When I try to connect to my wifi network I receive message "Unable to join network "Netgear" this starated as of 8/16 before thsn I never had this problem
connecting to this network previously .I have attempted after manually entry of DNS still nothing a;so did the network reset, and full reset of settings and still
get nothing I even have my network unsecured at this very moment still nothing changed it does not show the network info ; no DNS address or anything any suggestions

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points

Can't connect to my wifi network when external monitor is connected

The computer is a very new Retina Macbook Pro. The monitor is an older Alienware/Benq 20" (3:4) LCD. I'm using a DVI to mini-displayport adaptor and plugging into the thunderbolt ports on the Macbook Pro. Router is a Belkin F5D8233 Wireless N router. As soon as I connect the monitor my connection to my wifi network times out and refuses to let me connect (every attempt just results in a "connection timed out" error). However, I was surprised to find that I could connect to my neighbor's network without any issue. Anybody have any idea what the issue could be?

Maybe related to bullet #7 here http://support.apple.com/kb/HT1365.

HT1695 Did iOS 6.0.2 update, but still can't connect to certain WiFi networks. FIX THIS, APPLE!

Like the subject line says, I installed the 6.0.2. update with my fingers crossed, but my iPhone 5 still doesn't connect to certain networks. Of course, Apple in their "Troubleshooter" sends me to an article telling me how to connect to a WiFi network, and to reset Network settings (which I've done numerous times).
This happens in a local coffee shop, and one odd thing is that the owner thinks he has his router set to require a password, but none of my devices show it to be a secured network (though it was and did require a password when I initially joined the network).
Any help would be greatly appreciated.

We have the same problem here at the university campus. See my post
https://discussions.apple.com/thread/4322372
We hope that Apple will release a fixed iOS 6-Version soon.

Third-Party apps can't connect to public wifi networks.

When I connect my iPhone to my university's Wi-Fi connection, Apple Apps (Safari, Mail, iTunes, App Store...) all function normally. But when it comes to third-party apps I can't get them to connect to the internet. So is there a workaround to this? Maybe get iPhone to treat apps as an "Apple App" so the proxy server gives it access to the connection (The server requires a username and password verification to connect). This happens with other public wi-fi connections. I dunno if I'm giving all the necessary info. so if anything is unclear, I can explain further...
Thanks
Message was edited by: A-Jay

You don't give any examples of the apps that are not working.
Some public WiFi networks will only have certain network ports open, like those for web and mail. If an app uses an unusual network port then it may not work on the public WiFi network.

I just updated to IOS 8.2 and now I can't connect to any WIFI network at home or elsewhere. I get a message that says "can't scan for WIFI" and it just keeps searching. How do I fix this?

Can someone tell me how to fix this problem before I use up all my data?

If you can't connect to home wi fi, or any wi fi, go into the RESET area of your SETTINGS and choose RESET NETWORK CONNECTIONS. Turn the phone off and back on and you should be okay. It may take more than one try. Good luck.

Can't connect to office wifi network

I've been given a new MacBook Pro at work and we're struggling with getting it connected to the office wifi.
Model is a MacBookPro 8,3
Every time I go into System Preferences > Network and create an Airport connection with WPA2 Enterprise as security, the connection remains in yellow dot status with Self-assigned IP listed below AirPort in the left column.
I also see 802.1X: WPA: SECURE (the network SSID) and a Connect button. When I hit connect, the Airport status in the left is still yellow and says "On".
However, the Network Name now is grayed out with "No network selected".
If I choose the network from the drop down, I'm asked for the user name and password with 802.1X set to Automatic. Once this happens, the lin with
802.1X: WPA: SECURE shows a button of "Connect", so that gets disconnected, and Self-Assigned IP comes up in the Airport status on the left.
Seems like an endless loop of failing to connect.

I don't know about all that techie stuff--maybe that is the issue. But I have had no problem connecting to our office wifi network. It showed up in the airport drop down menu & I selected it & entered the password.
I was also told at the Apple store that having my computer password protected would protect it from outsiders being able to get into it--that is with at least an 8 digit password with alpha numeric & at least 1 capital.
So don't know about the WPA stuff, but I was told that this is reasonably secure. So someone else could address whether that is needed. I read about that in connection with a home wifi set up but don't know about otherwise.
I'm on a MacBookPro 13, 2010.

IPad and iPhone can't connect to my wifi network

10/1/13 - Last week updrade my software on my Imac and set up ICloud - could be unrelated to my problem.
1. My iMac and Apple are connect to my Belkin wifi system okay.
2. My two iphones and Ipad cant access my wifi - 'Unable to join network message'
I have search the discussion forums and tried most solutions - still can't get them to join.
Thanks
Kerry

Reboot your router by turning it off for about 15 seconds.

X60s upgrades to XP SP3 and only connects to WEP WiFi Networks

Hi,
I have an X60s that upgraded to Windows XP SP3 and now the X60s can only connect to WEP Wifi Networks.
If I try to connect to an WPA2 or WPA network it keeps trying to optain an IP address and then it stops with
that red X on top of the NIC icon
Is there a new driver of hotfix from Lenovo in this case?
Many thanks
Oliver

Hi,
I have an X60s that upgraded to Windows XP SP3 and now the X60s can only connect to WEP Wifi Networks.
If I try to connect to an WPA2 or WPA network it keeps trying to optain an IP address and then it stops with
that red X on top of the NIC icon
Is there a new driver of hotfix from Lenovo in this case?
Many thanks
Oliver

Can't connect to my Wifi

Hello!
My iPod Touch 3g is giving me trouble. I can't connect to my Wifi-network at home. I've tried to restart both Ipod and Router. I've trided to rebooth wifi settings.
The wierd thing is that i can connect to the network when i remove the security password, i use the WPK security. But i don't want to have it open like that all the time, what can be worng?
Thankful for help!
/Glenn

Here's the encryption protocols that I know - WEP, WPA, WPA2. I'm not familiar with WPK.
When you set up your router WEP is the least preferred as it requires that limit your password characters based on the strength of encryption (5 characters, 48 bit; 13 characters, 128 bit). For WPA and WPA2 you have a choice between personnel and enterprise. Personnel is what you want for home use. You should also see the term PSK (pre-shared key) which just means that all devices use the same password.
Passwords on the touch are case sensitive so be sure considering that when typing.

Can't connect to my wifi network

Similar Messages

Maybe you are looking for