Can't connect to network via iPad

I recently bought an Actiontec E2500 router/modem. My MAC Book Pro connected easily to the interent
via Verizon DSL and the modem/router works well. Unfortunately when I try to choose a wi - fi network for my iPad
(CB36N) it says "unable to connect to network" because the temporary admin password on the back of the modem does not work.
A password from Verizon also does not work. Actiontec said go to 192.168.0.1 to find a password but although there are two sites related to this product, they do not mention the word "password". Both companies don't seem to even understand my question!! The Actiontec guy said maybe my iPad isn't working! (it's brand new and works fine) Verizon has offered to send a tech to my house (I would have to take off work and wait from 8AM to 7PM) which seems ridiculous and a waste of time. I'm sure this can be resolved in a better way. Any thoughts? The word "Admin" does not work either. Thanks in advance.

Hi Jenroses,
I would suggest backing up your iPad and updating it to the latest iOS, which is iOS 6.1.4
The links below should help you with this:
Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
iOS: How to update your iPhone, iPad, or iPod touch
iOS: Troubleshooting Wi-Fi networks and connections
Be sure that you are in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap the blue dot and choose Forget this Network. Try to connect to your desired Wi-Fi network again.
Note: You will need to enter your Wi-Fi password again if your desired network requires one.
Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
If your issue is still unresolved
Follow the steps below for the issue you are experiencing.
Unable to locate a Wi-Fi network
Unable to connect to a Wi-Fi network
Wi-Fi disconnects, or signal strength is less than expected
Unable to access the Internet while connected to Wi-Fi
Unable to automatically connect to Wi-Fi
I hope this information helps ....
Have a great day!
- Judy

Similar Messages

  • 10.4.5 - mac mini can't connect to network via airport since upgrade

    I've been experiencing problems since upgrading to 10.4.3. Mainly, I've noticed that I can't easily connect to our wireless home network all the time. The pattern has been that I start by shutting down my computer completely. When I start up it again, it can't connect to the network. I have to create a new profile and then it will connect. That was buggy, but at least I found a hack. However, since upgrading to 10.4.5, I can't connect to our home network at all. The Internet Connect application says that I am connected to the base station, however I can't connect to the outside world via a shell, browser or email application. Our network is secured with a WEP and the base station is a D-Link. I searched the forums for some tips, but didn't find anything. Pointers appreciated.

    Be very careful about the sequence you do it. You must make sure that the airport connection is turned off (i.e. the airport menu icon looks more like a profiled eyeball without the iris than a series of lines like the towers of hanoi). Then create a new location in the Airport network preference, and make sure that these settings are there under Options
    1. Keep looking for recent networks
    2. Automatically add new networks to the preferred network list.
    3. Change the status of Enable interference robustness.
    And by default, join preferred networks in the Airport location.

  • How can I connect my Powerbook or iPad Retina via HDMI cable to 4K digital video camera to be a "control monitor"

    How can I connect my Powerbook or iPad Retina via HDMI cable to 4K digital video camera to be a "control monitor"

    That won't work with the iPad, unless maybe there's a "control monitor" app somewhere.

  • Ipad can not connect to network

    Can not connect to Internet

    Does the iPad connect to other networks?
    Does the iPad see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPad connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Can not access home network via ipod touch, password entered  not accepted

    Can not access home network via ipod touch, password entered not accepted
    Trying to help my son set up his ipod touch to connect to the network and the password I entered is not accepted.
    1. Which password is required? I entered the password I use for logging into my router
    2. The home network is recognized, when selected it requires a password to be entered, but I am just not sure what password it is looking for to connect.
    I have not been able to find any information on this subject

    jersey0904, Welcome to the discussion area!
    You need to enter the wireless encryption password... not the administrative password for the router.

  • Can't connect to internet via MacBook Pro to Airport Extreme

    I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.

    Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.

  • HT4972 can't connect to network with linksys e2500

    Can't connect to network with linksys E2500. Can anyone help me?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How can you connect iPod touch or iPad to TV and watch it what kind of connection?

    How can you connect iPod touch or iPad to your tv and watch it

    Not really anything to do with Apple TV
    If you want to connect an iPad or iPod
    http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter
    http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter

  • How can we connect mac air and iPad to share all documents and downloads

    How can we connect mac air and iPad to share all documents and downloads?

    If you are referring to the "Documents" and "Downloads" folder in OSX, I suggest using https://www.dropbox.com

  • HT3500 can i connect my 1st gen ipad to my HP photosmart C4780

    Can i connect my 1st gen ipad to my HP photosmart C4780

    In order to print from an iOS device, the printer must be AirPrint-enabled. If it is not, you have a number of options to still do so. One of them is PrintCentral.

  • How can i connect iphone 3 to ipad 2?

    how can i connect iphone 3 to ipad 2?

    You can't physically connect an iPad and iPhone. You can blutooth connect, but not sure about iPhone 3.
    iOS: changeing Personal Hotspot
    http://support.apple.com/kb/HT4517
    Use Bluetooth to  your iPhone, iPod touch, or iPad
    http://www.macworld.com/article/1159258/bluetooth_ing.html
    How to Pair Bluetooth Device to iPad
    http://www.ehow.com/how_6194904_pair-bluetooth-device-ipad.html
     Cheers, Tom

  • Can you connect a 4th generation iPad to a printer with a cable?

    Can you connect a 4th generation iPad to a printer with a cable?

    And more specifically ringing over Wi-Fi uses AirPrint. The printer must be compatible with AirPrint. Not all printers are.
    http://support.apple.com/kb/ht4356

  • Can i connect my HDTV with ipad

    Can i connect my HDTV with ipad?

    gyrhead is right - a short video embed to further explain ( hopefully it works )
    Regards.
    Embed did not work as I thought -
    heres a link : http://youtu.be/UnyyCMPyTq8

  • Can't connect to ichat via gmail account

    Hi!
    I can't connect to ichat via gmail account.I created a new account via Preferences window in ichat settings but still can't do it. A pop-up window is shown and it asks to enter a password as ichat cannot log in on my gmail account.I know that i enter a correct password.  has anubody such a problem? how can i find out if it is a problem with the password, or my account name.

    Hi,
    1) The Google Talk option needs to be Enabled in your Google settings.
    2) The name (ID) you enter in Messages or iChat needs to be exactly as you see it when you are logged in to the Google Mail web page.
    (there is a difference between @gmail.com and @googlemail.com IDs)
    3) If you are using the Specific App password method you need to correct password.
    4) In the server Settings (App Menu > Preferences > Accounts > Google Account > Server Settings) try setting port 443 if the 5223 one is not working.
    10:05 pm      Wednesday; March 19, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Imessage wont connect using my apple id says can not connect check network conection and my network connection is fine what do i do

    having trouble with imessage since i updated to the ios7 cant get it to connect to imessage when i use my apple id says can not connect check network connection and my network connection is fine does anyone know what to do to fix this

    i have the same problem but i didnt update

Maybe you are looking for