Can't connect to our new car kit

Bought a Blue Ant supertooth 3 car kit. All the other phones in the house work with it except the palm 700p verizon. The only thing I can think of is that the palm doesn't ask for the pass key to be entered. It finds the kit, tries to connect then says unable to add to your trusted list.
Just tried it again for the 20th time, now it asks for the passcode but when I enter it it still says can't add to trusted devices??
any ideas?
Post relates to: Treo 700p (Verizon)

Hello!
First make sure the car kit is NOT in the trusted list already.  In you bluetooth application on the Treo, go into the bluetooth application and then tap on Setup Devices.  From there, tap on trusted devices button.  If any car kit, including your blue ant, is there, delete them and hit done.  Afterwards, soft reset the deice and try to resetup again.  This time when you perform the setup via the phone, make sure your searching for "Nearby Devices" and not "Trusted Devices" or "Known Devices" and see how that fairs.
If nogo, then hotsync the phone to backup the content and then hard reset the Treo.  Right after the hard reset, try to pair to the bluetooth device again without yet rehotsyncing.
Also make sure you are using the 1.10 software version on the Treo.  Go here for additional info on software version and update if needed.
Post relates to: Treo 650 (Unlocked GSM)

Similar Messages

  • I can't connect to the new downloaded version of Skype, as my old one is in the way, and don't know how to get rid of it.

    I can't connect to the new downloaded version of Skype, as my old one is in the way, and I can't get rid of it.  what do I do?

    We'll need more details.
    What happens when you drag the old version to the Trash?

  • Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server

    Hi,
    Our remote users had been connecting to our Exchange server at our office since the Exchange server was installed in 2011.
    Starting last Wednesday, Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server.  Outlook kept asking for a username and a password.  At the same time, entries of Event 4625 were generated on the Event
    log on out Exchange server. 
    Events 4625 has the following properties, "Logon Type: 3", "Failure Reason: An Error occured during Logon.", "Status: 0xc000006d", "Logon Process: NtLmSsp", and "Authentication Package: NTLM".
    By the way, I had used a laptop to test this problem.  Its Outlook work fine ion the main office, but it won't work outside of our office.
    Does anyone have any idea?
    Thanks.
    Johnnie :(
    Johnnie

    http://blogs.technet.com/b/rmilne/archive/2015/03/17/update-015_2d00_027-revised-_2800_3002657_2900_.aspx
    For additional people reading this thread, please update to v2 of that update.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Connecting BB8900 to mercedes car kit

    Help, I have a BB 8900 and I am unable to access my contacts using a mercedes bluetooth car kit. My old razor works fine

    You need to set the MB to "receive external data" within the phone function;
    then go into the Bluetooth menu on the BB, select the MB entry and there may be an option to "transfer address book" in the menu system (there is on my 8120 so hoping it's the same for you).
    if so select the option, it'll start generating the address book before transferring (I get a bluetooth connection lost message during the process but ignore it).
    The MB system will start showing the entries received (assuming the transfer works), thinks about it for a while as it sorts the new data.
    Go back to the MB system and the phonebook should have your data.
    Now for the kicker;
    I can't actually update the MB phonebook with new entries from my BB without having to do the "transfer phone book" routine - which gives me multiple entries on existing contacts (Comand APS on 2009 C class, no convenience phone kit), as there appears to be no way to select new entries on the BB for uploading.
    So the MB needs a factory reset - this of course removes everything in the Comand system inc the address books, music files, GPS info such as My Address, stored addresses etc etc (those with Audio 20 won't have this problem, don't know about Audio 50 users),  all the Bluetooth pairings are lost inc your BB so delete the MB entry in your BB, re-pair etc etc.
    I don't think I've got it wrong, MB are looking into it to give them their due.
    If anybody knows how to solve this let me know!

  • Bluetooth Intermittent Connectivity to Mobil-Ease Car Kit

    My iphone 3GS constantly becomes disconnected from my car's Mobil-Ease. Usually it happens when I try to make a call using the voice commands of my Mobil-Ease. After commanding it to dial a specific number, the iphone starts calling the number, but disconnects from the bluetooth, and the person answering is left saying 'hello? hello?'
    When this happens, I turn off the iphone's BT or "Forget the Device" and then reconnect, only for callers to sounds all garbled on my end.
    Lastly, whenever I try to make a call using the iphone, I often then can't get the iphone to connect to the bluetooth. I can click on "Mobil-Ease" in the devices several times and it just won't connect.
    I never had this problem when I had a 3G, only happened when I upgraded to 3GS.

    Just to share the way I finally solved the problem - might be helpful to somebody else.
    I didn't noticed before that the IOS 8.1.2 update changed automatically the name of my Iphone from the one I've given to it before to just "Phone".
    I re-named the Iphone (just gave a new name to it by going to Settings -> General -> About -> Name) and then the car kit managed to find the phone very quickly via Bluetooth.

  • My new HP all in one computer was recently connected to our new Photosmart 7510 printer. It worked

    I own a one month old HP Omni 220 PC (all in one). The operating system is Windows 7. It is connected to wi-fi network in the home. The Internet portion works fine. And, for about 30 days, it would print to our new wi-fi connected HP Photosmart 7510 just fine. Today, it will not print. Our other computers connected to the network print just fine. So, it's not the printer, or the wi-fi. Can you tell me what might have happened within my PC, and what I need to do to fix the problem? I tried restarting the PC, and the printer but that didn't fix the problem. There have been no recent changes to the software or hardware configurations.
    Thanks,
    Bill

    you have to file the music file if you dont itunes cant play a file that does not exist. check the get info and look for the old music file on your old computer. Or do this http://support.apple.com/kb/ht4527.

  • 10.6.8 MBPro Screen Sharing suddenly can not connect to our other Macs.

    We've used Screen Sharing from our MBPros for the past few years to manage our Mac file & media servers. Last year we replaced our G5 file server with a Mac Mini with Lion server. No problems - we could still use Screen Sharing to manage both this Lion file server and the Snow Leopard MacPro that's hooked up to our TV (among other things).
    Friday morning my MBP could not see or connect to the Lion file server - the MBPs have the Lion server's data drives in Login Items so they mount when we log in. I also cound not Screen Share to either the Lion server or the SL MacPro. I checked the MBP's ethernet connection and could get to our router and the internet. When I tried to connect via Screen Sharing (by using the Share Screen... button in a Finder window, by using the Connect to Server command with vnc:// protocol, or by using the ScreenSharing menulet) I would get the "Connecting to Lion server" alert but nothing further. I left it for 10 minutes or so and it eventually disappeared but the connection never opened.
    I checked the two servers and both were up and running. From the SL MacPro I could use Screen Sharing to get to the Lion server - and my MBPro too. From the Lion server I could Screen Share to the MacPro and my MBPro also.
    The problem appeared to be with my MBPro. I switched to an unprivledged user account on it and found I could then get to both servers using Screen Sharing. So it was just my account on the MBPro. Rebooting did not help. Turning on AirPort, connecting to our home AirPort Extreme and unplugging the ethernet cable did not change anything with my account connecting to the servers.
    I figured something somehow got pranged in my account's credentials. I used Keychain Access to delete all keychains containing the servers' names, IP addresses or sharing. I was asked for my credentials when I mounted the server's shared drives, but not when I tried Screen Sharing - got the same "Connecting to Lion server" or "Connecting to media server" dialogues and was never asked for username or password, but never connected either.
    I cleared all caches using the utility Maintenance in case my MBPro was using invalid cached info. No improvement.
    Saturday morning I shut down everything on our entire network - FiOS "modem"/router, Netgear gigabit switch, AirPort Snow, AirPort Extreme, MacPro, MacMini, both MacBookPros... even the FiOS cable box. Still no improvement.
    IPv6 is disabled on the Lion server. All the Macs have all curent updates applied.
    I've spent most of today Googling for solutions and trying them out. None have worked - though I see several very recent reports in these Apple Communities about Screen Sharing suddenly not working.
    I really do not want to have to move to a new account on my MBP - and what's to say it won't happen again? Anyone have other suggestions?

    sunnovagun!
    Hitting the Log Out button in the MobileMe panel worked. I can now connect to both the SnowLeopard and Lion servers just like I used to.
    My condition appears to have been slightly different from yours, gmia - the MobileMe on my MBP had the correct info, but hose are not the credentials i use to remote to the two servers. I'm guessing that for some reason ScreenSharing began using my MobileMe credentials instead of what I had saved in the keychains.
    Wonder if it had anything to do with the shutdown of the MM servers. That would be odd as using ones apple ID to log into a Mac remotely was new with Lion, and I had the same problem with our SnowLeopard server - which I remote into much more frequently.
    Probably didn't hurt though to reboot the entire network...

  • Can't connect to our wifi with my laptop, but pc and iphone can!

    All devices (my boyfriends pc and my iphone and ipad) can log into our new wifi network except for my macbook pro. I can connect to any other wifi like the starbucks or our neighbors network, and all different hotel networks. I've never had a problem connecting with this laptop and have had it for years.  Apple says it's comcasts, comcast says it's apple. I've spent hours on the phone with both and neither has solved the problem. HELP please anyone. I feel so constrained with this ethernet cord! And I don't want to get a new laptop just to get wifi.
    I've reset the modem, I've changed login and password info, I've been on the phone with apple clearing out all my network history etc...
    Thanks in advance to anyone who can offer some help.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Drive 2.1 can not connect to our cs3 versioncue server what do I need to use our projects in CS5?

    Mac XServe is our CS3 server. Trying to upgrade to CS5 and found out Version Cue is no longer. Read and found the Drive 2.0. It can't seem to connect to my current server. We still have access with one of our CS3 machines. Is there a program I need to get to continue on with our versioning and the ability to use our projects we have? Or do I need to go into every project and export or something to be able to start using CS5? Thank you in advance for any help!!!

    sunnovagun!
    Hitting the Log Out button in the MobileMe panel worked. I can now connect to both the SnowLeopard and Lion servers just like I used to.
    My condition appears to have been slightly different from yours, gmia - the MobileMe on my MBP had the correct info, but hose are not the credentials i use to remote to the two servers. I'm guessing that for some reason ScreenSharing began using my MobileMe credentials instead of what I had saved in the keychains.
    Wonder if it had anything to do with the shutdown of the MM servers. That would be odd as using ones apple ID to log into a Mac remotely was new with Lion, and I had the same problem with our SnowLeopard server - which I remote into much more frequently.
    Probably didn't hurt though to reboot the entire network...

  • E50 connected to Parrott CK3100 Car Kit

    Having recently bought a E50 i cannot connect the phone to my car kit. I have been advised that if i download the software for the 616 car kit using the version for the e60 phone it will work fine. Unfortunatley the e50 phone will not accept the 5.30 version and the phone says system error when trying to upload. I can get connected and the phone will let me make and recieve calls but no phone book contacts appear which is a big pain.
    A great phone but it may be on ebay sooner than i think.
    Alex

    If you have not already flogged it on eBay, or found an answer, it would seem to be to use the 610 contact sync software and follow the steps at the following link - HERE
    It worked for me anyway. The phonebooks are synched. Battery & signal strength do not show but otherwise a quick test seemed to show everything else OK

  • 80G iPOD connection to a new car dash

    I have used a FM modulator before for my iPOD but my new car has an mp3 jack in the dash and I would love to use it. It looks like a headphone connector. Do I purchase a cable to connect the dash stereo to my iPod through the earphone jack on the iPod? If so, what type of a connector? Thanks for the answer(s) in advance.

    Normally you would need a 3.5mm to 3.5mm stereo cable. These can be picked up at a lot of places.
    Mort

  • My ipod got wiped clean when trying to connect with our new computer

    After installing Itunes on our new computer and the trying to move my Library to the new file, my ipod was wiped clean of all music and because my original computer with the library on its hard drive was destroyed I now have nothing...how could this have happened? What can I do? Since Apple has a record of all the music I have purchased couldn't it give the music to me?

    Every time you download music from the iTunes store Apple have to pay the artist royalties, so the official stance from Apple is that purchases from the iTunes music store can only be downloaded one time. Then, you must pay again.
    This is why you are prompted to back this music up to a cd or dvd.
    Some people say that they've been allowed a re-download for various reasons when they've contacted Apple.
    You can only ask but please be aware that Apple are not obligated to do this for you.
    http://www.apple.com/support/itunes/store/lostmusic/#form

  • ITunes can't connect to my new Airport Express even when light is green and see it with Airport utility. Please help!

    Hi,
    I'm using iTunes with my iMac and like listen the my music collection in my Hi-Fi which is 20 m far from the Mac. Because of the distance in my flat and other obstacles I'm using a power line. I installed the Airport Express through the Utility and no problems: Airport light is green and configured. iTunes air see it but it can't connect to it.
    I made several resets, plugged and unplugged the power and no change, but Airport light is always green, see it in iTunes and the Utility.
    This is driving my crazy!
    Any ideas ?
    Thanks

    Hi Jim,
    Thanks for reacting to my question.
    Yes, I did reboot the router, unplugged and replugged the Airport Express with ro result .... iTunes cannot connect to the Airport Express. I'm using power line to carry Ethernet because between my Mac and AE there are about 20 meters, but problems started since I updated AE version to version 3 ...
    It is also non sense because the Utility sees it and then suddenly disappears ! but light remians green ...
    I think there might be something wrong with the new firmware versions ...
    Carlos

  • Can't connect to the new version of appworld 1.1

    8330 will not connect to the new version of appworld. It is telling me to check my network connections and try again. Network connections seem to be fine... any suggestions?

    Hi and welcome to the forums!
    Go to options, advanced options, applications, scroll to Blackberry App World.
    Highlight it (don't click on it), menu key, select edit permissions. 
    Expand every option and make sure that all are set to allow.
    Go to the browser, select options, cache operations, and clear all categories.
    Do a battery pull as listed.
    Are you on a company server based Blackberry or is this your personal phone?
    Go to options, about what version of OS are you running. (4.x.x.xxx format)
    Thanks,
    Bifocals
    No data will be lost when doing the following: pull the battery while the device is ON.
    Replace after a minute, Let the device reboot 1-3 min, see if the problem is fixed. 
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Suddenly our windows 7 clients can't connect to our wireless network due to a cert error?

    Our company uses a Ruckus setup for our wireless network.  The laptops have to have a certificate on them issued from our CA and be a member of AD group.  Yesterday we noticed that nobody could connect to the internal wireless network.  In
    the security logs for the computers there is a this error:
    A request was made to authenticate to a wireless network.
    Subject:
        Security ID:        host/xxx-xxxxxxx
        Account Name:        -
        Account Domain:        -
        Logon ID:        0x0
    Network Information:
        Name (SSID):        Forest River Internal
        Interface GUID:        {53b8a5f4-e910-4e3e-ab88-eb4f46356e1f}
        Local MAC Address:    68:94:23:00:26:1F
        Peer MAC Address:    C4:01:7C:4A:88:58
    Additional Information:
        Reason Code:        Explicit Eap failure received (0x50005)
        Error Code:        0x80420202
        EAP Reason Code:    0x80420202
        EAP Root Cause String:    The authentication failed because certificate required for this network has expired on the server computer
        EAP Error Code:        0x80420202
    this cert was is supposed to be good for another year, is there anyway that I can get the CA server to renew this cert or do I need to issue a new one and distribute it?  The other issue I'm running into is I can't seem to get my CA to issue a new computer
    cert.  All the servers are 08 R2 boxes.

    Hi,
    Do you have any progresses on this issue by now?
    Here is a related KB article below:
    Windows 7 does not connect to an IEEE 802.1X-authenticated network if an invalid certificate is installed
    http://support.microsoft.com/kb/2494172
    Best Regards,
    Amy Wang

Maybe you are looking for