Can't connect to router and network with Airport on G4

Just upgraded from a Belkin Wireless G router (c. 2004) to a Belkin Wireless N. Problem is that one of my old G4's can't get on. The security with the old router was WPA, and it worked. But the new router is WPA/WPA2-PSK, and the G4 with the Airport card running OS X 10.4.11 (Tiger) only asks for WEP. How do I get on?

Hi Odell,
Some old G4 Airport cards cannot do WPA2, but to see what choices you have...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed. See Security choices there.

Similar Messages

I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!

I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!

Try:
- Powering off and then back on your router.
- Anything else here
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

I can not connect the wi-fi network with my iPad Air

I can not connect the wi-fi network with my iPad Air

Hi there maurobats,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
-Griff W.

Can't connect macbook pro to internet with airport extreme

Can't connect macbook pro to internet with airport extreme

If you have ethernet still on your MBP plug it in by ethernet and tell me if that works.
Tell me how the Airport is setup.. what broadband modem and router you have.
What OS on the laptop? Yosemite I guess.. since it is the most troublesome.
Did it work before whatever change was made? Has it worked in the past? When did it stop and what did you do that coincided with it stopping?
Upgrade to Yosemite??

Can't connect to a wifi network with a wep keyid 2

Hi,
how do you connect to a wifi network with wep but the keyid is 2, i can't find an option.
i put the password, in asci and in hexa, and the answer "can't connect to the network" a xp near got connected after changing the key id in configs :((
did i miss something?
thanks for help

I am relatively new to Mac's, as at 40 having had IBM/Windows compatibles since I was 14 (8086 woot!), I am still learning.
However, I believe the answer is that you must use Key 1. I don't believe OSX offers the chance to use any others. However, in case I am wrong, try putting a $ before the WEP passphrase, but again, I think it only uses Key 1.
Hope that helps,
Jesrael
Macbook 1.8 Core 2 Duo Mac OS X (10.4.9) 2GB Ram

Why can I connect to my home network with my iPhone 5 in one room, but when I move to another it is 'unable to connect to the network'

At home, I can connect my iPhone 5 to my home wifi network with no problems, as long as I stay downstairs.
As soon as I go upstairs my phone disconnects from the network. I can still see the home network it in the available network lists (with full signal strength), but when I try to reconnect I get an 'unable to connect to the network message'
If I move back downstairs it reconnects
This has only started happening in the past week or so
I've tried to forget and rejoin the network, but this doesn't work
I reset my network settings on the phone. This worked for a couple of hours and I could connect to the wifi upstairs, but now it won't connect again.
Does anyone have any ideas what is causing this?

Sounds like your wi-fi signal strength has degraded. Try rebooting your wi-fi router, or get it serviced.
Do you have similar issues with any other wi-fi routers?

How can i connect to a wifi network with no internet connection?

I used to be able to connect my Z10 to a wifi network even when the network had no Internet connectivity when i got my phone in Feb. 2013 (10.0) However ever since the 10.1 update this has stopped working. I cannot connect to my wifi network when there is no Internet connection. I cannot play videos / music from my phone to my tv/music system or connect to my laptop. However my laptop and tv communicate just fine through the same network.
Can anyone recommend anything for this?

nikhildhoot wrote:
I used to be able to connect my Z10 to a wifi network even when the network had no Internet connectivity when i got my phone in Feb. 2013 (10.0) However ever since the 10.1 update this has stopped working. I cannot connect to my wifi network when there is no Internet connection. I cannot play videos / music from my phone to my tv/music system or connect to my laptop. However my laptop and tv communicate just fine through the same network.
Can anyone recommend anything for this?
Your saved wifi networks should connect automatically whether internet is available or not, you may receive a notification "there appears to be no internet connection".
Update to 10.2, if not available from your carrier then use Sachesi (see other threads).

Can I connect my Linksys WRT160N V3 with Airport Extreme via ethernet cable?

I have a Linksys WRT160N V3 router (Living Room) to my cable modem but the wifi does not reach certain spots in the house where its necessary. If I buy a Airport Extreme and place it in my bedroom and connect it with an ethernet cable that I have connected with my iMac will the airport extreme work as a wifi extender since wifi does not reach my room?

Yes, the AE can be simply put in bridge mode so it will become an AP and set the wireless to create a wireless network.. you can then use same name and same security as linksys.. this is called roaming network.
http://support.apple.com/kb/ht4260
Although the apple instructions have two apple routers, any two wireless routers will work the same way.

Time Capsule connectivity drops on extended network with Airport Extreme

I have a new Airport Extreme router as the main router in my network and a Time Capsule set to extend the 2.4Ghz network. The routers must be configured in this order because I want the 5Ghz network from the Extreme to cover my main seating area.
The problem I have is that while I'm connected to the Extreme, on either the 2.4Ghz or 5Ghz network, the connection to the Time Capsule will 'drop'. The network drive within the Time Capsule will no longer be available and the AirPort Utility no longer shows the Time Capsule. If I reboot the Extreme, the Time Capsule will reappear.
Also, when the connection drops, if I were to move within the primary range of the Time Capsult and connect to the 2.4Ghz network, it will connect flawlessly and I would have access to the Time Capsule and it's resources. It is only access through to the Time Capsule through the Extreme that is no longer available.
Any ideas what could be causing this? Both routers work flawlessly otherwise. I'm fairly certain there isn't a hardware problem here. I've gone through all the configuration settings multiple times and can't find anything that could affect this. I have the latest firmware for both routers and the latest AirPort utility.
One thing to note is that the Time Capsule is a North American unit, while the Extreme is from Hong Kong. I know there are slight differences regarding the wireless channels that both can use, but I don't think this is an issue since the Time Capsule maintains proper internet connectivity the whole time. If it was a channel issue, I'd expect the Time Capsule to lose internet access when this issue arrises.
Any suggestions are greatly appreciated!

7.4.2 firmware does NOT resolve this problem.
I also have this problem -- it started about 2 weeks ago (around July 20?), possibly at the time the new Airport Extreme firmware went into effect. I have two separate Mac laptops that each use Time Machine to back up to different disks that are attached to the Airport Extreme (i.e., each laptop has its own backup-destination disk). Both were working flawlessly before (for more than 6 months); now, each one reliably drops the connection to the disk (produces an error message, and thereafter cannot re-connect to the destination disk until I cycle the Airport Extreme with power-off/on). I had hoped that 10.5.8 would help (the release notes talked about improved stability with Airport connections), but not so.

Can't extend my Apple Wireless network with Airport Utility 6

I have an Air Port Extreame and an Air Port Express and am trying to extend my network and since I upgraded to Air Port Utility 6 it will only let me join the network and not extend it. I can not find the option to allow this network to be extended anymore within 6 on the extreame. Is anyone else having this issue as well or am I just missing where to choose to allow my network to be extended like I did in 5?

It would be hard to say, at this point, if this option was "missed" or became "automatic" when another AirPort is configured to extend a wireless network. I would tend to agree with you that it is the former.
As you know this is a user-to-user community. Although Apple employees occasionally visit the forums, there is no guarentee that they would act on any of the suggestions users place here. Instead, you should submit your suggestion to the following Apple site.

Can't connect to Xbox 360 live with Airport Extreme wirelessly

Just bought Airport Extreme and Xbox 360 slim and we are having trouble connecting wirelessly.
When testing connection on Xbox, some problems:
- MTU setting not high enough
- does not have assigned IP address
Been trying all day and getting frustrated. Any help appreciated.

Unfortunately, the AirPorts do not offer a means to change MTU settings.
Additional Microsoft articles on the topic of MTU that may be helpful:
Xbox 360: You cannot connect to Xbox Live: The console fails the MTU test
Connection Tests: Maximum Transmission Unit (MTU)

Can I connect a wi-fi antenna with Airport Extreme?

I use my apartment's WI-FI signal to get internet using a wi-fi antenna. So basically my question is, can I simply plug in the antenna (uses a usb cable) to the airport extreme?
I tried doing just that, used my laptop to login to the airport extremem...then tried to get on the internet that way, but it doesn't work. So it appears that I need a modem attached to the airport extreme. Is my logic correct?

jerryfromtomball wrote:
I use my apartment's WI-FI signal to get internet using a wi-fi antenna. So basically my question is, can I simply plug in the antenna (uses a usb cable) to the airport extreme?
I tried doing just that, used my laptop to login to the airport extremem...then tried to get on the internet that way, but it doesn't work. So it appears that I need a modem attached to the airport extreme. Is my logic correct?
Yes

Can't connect to wi fi network; network works with mac book

can't connect to wi fi network with ipod touch. network is working, as i'm able to get on-line with mac book; have cable based wireless router.

Try;
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power of and then back on yur router
- Reset network settings: Settings>General>reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
Can you see the network?
Does the iPod connect to other networks?
Any error messages (can't join, password incorrect)?

It appears since my Windows PC McAfee AV subscription expired my PC's iTunes doesn't see my two Apple TV2's. My computer has internet connection thru router and my ATV has internet connection thru same router. My iPad can see the ATV but it can't see iT

My Windows PC iTunes doesn't see my two Apple TV2's (in the speaker button in lower right of iTunes), I believe this problem began when my PC's McAfee AV subscription expired. My computer has internet connection thru router and my ATVs have internet connection thru same router so it's not a networking issue. My iPad can see the ATVs but it can't see iTunes so the problem appears to be PC/iTunes related. I turned the PC's firewall off but no joy. I uninstalled the expired McAfee and still no joy. Reboot = no joy. Glass of scotch = no joy. Need help!!

Wanted to add that I turned on Home Sharing w/the same account in iTunes and ATVs. And I've successfully streamed music/photos to my ATVs for over a year.

TS1398 Update iPhone 4s to 6.1.3 (10B329) now I can't connect to any wifi networks at home or at work and all car Bluetooth systems will not connect either. Help! Extremely annoyed at apple for putting out software that causes such mayhem.

My iPhone 4s has been update as I said in subject bar.. Now can't connect to any of my cars Bluetooth systems. Also even more frustratingly can't connect to any wifi networks at home or work!!
How can apple put out such an update that causes so much grief and inconvenience to hundreds of people. Not to mention risking lives with Bluetooth kits not working...outraged!!!!!!

First, grow up. Just because YOUR phone isn't working, doesn't mean Apple put out bad software. I've not had any difficulty, nor has anyone else I know. And just how is Apple risking lives with Bluetooth kits not working? It's YOUR decision to talk on the phone or text and drive. Not Apple's.
We're users here, volunteering our time to help others. Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help. Not to mention, it makes you look absolutely foolish.
Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
Good luck getting help.
GDG

Can't connect to router and network with Airport on G4

Similar Messages

Maybe you are looking for