Can't connect to router on different network ssh or http

Hello,
I set up my router with one interface on my trusted network. I set it up on this network temporarily just for seting it up using interface 0/0. I then configured the other IP on my to-be DMZ giving interface 0/1 a IP address. (I don't have my public IP address, but when I get it 0/0 will be the internet facing port). I plug in 0/1 into my DMZ and left 0/0 plugged into my trusted network. (I am using a Firebox between the DMZ and trusted network).
I can ping both my 0/1 and 0/0 interfaces, I can conncet via http and ssh to my 0/0 IP, but I can not connect to my 0/1 IP with http (times out) or ssh (nothing on screen).
Can any one help me out with connecting for management to my other interface on my to-be DMZ subnet?
Thanks,
Ken                  

Impossible to say without seeing complete topology and configurations.

Similar Messages

  • Can't connect to my home WiFi network

    I'm using a linksys router and using WEP security. The iphone can see my network, but when I enter the password it tells me I can't connect. I can't seem to make the phone forget the network so that I can start over.
    Any help would be appreciated

    I have the same problem. I can't connect to any password protected networks. I type in the correct password, but I'm unable to login. I don't have the option for the iphone to forget the network, because I've never been able to log in and therefore there is nothing to forget. The option doesn't even come up. Is anyone else having this problem? It is this way for 2 different networks.

  • Can't Connect to Router Manager

    I want to review the Router Statistics but can't get connected.
    I have typed in the address,  
    http://192.168.1.1/
    Also tried via the Router Icon &  
    http://voyager220v.home/
     but get message "Can't Connect to Router"
    All other web sites are easy to get into.
    Any idea of why this problem is occurring?
    Solved!
    Go to Solution.

    Have you tried rebooting the Voyager or resetting it to default by pressing the recessed reset button.
    Are all the lights on at the front, and the correct brightness?
    Failure of the Voyager 220V power supply was fairly common, but any 12V regulated power unit will work, if it has failed.
    The Voyager range of modems were some of the best, I still have quite a few as standby routers and extra wireless points.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • I can sometimes connect to my Wi-Fi network, but sometimes the name of the network doesn't even appear when i try to find available networks. Is it possible that my software is too new for the network?

    I can sometimes connect to my Wi-Fi network, but sometimes the name of the network doesn't even appear when i try to find available networks. Is it possible that my software is too new for the network?

    It may be your router is to old. Good read:
    http://www.wi-fiplanet.com/tutorials/7-tips-to-increase-wi-fi-performance.html

  • Can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously

    I can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously.  My old AE allowed this but can't make the new one work that way. 

    In your instructions, you say to use the same encryption type as the router has set up. well, I am using the WEP 64 bit encryption and the Airport Utility does not have this...it has 40 bit. Is this a problem, or do I have to be using a the same type of encrytion ?
    WEP is available in either 40 or 104-bit, but is usually "advertised" as either 64- or 128-bit respectively. For example, 64-bit WEP uses a 40 bit key (also known as WEP-40), which is concatenated with a 24-bit initialization vector (IV) to form the 64-bit RC4 traffic key. So, WEP 64 on the Linksys & 40-bit is equivalent.
    What concerns me more is the loss of bandwidth performance you are experiencing when connecting the AX. When the AX is configured as a wireless client it is acting just like any other wireless devices (computer, laptop, printer, etc.) and not like another router. This should cause little or no bandwidth loss. True the more secure the wireless encryption used WPA2 vs. WEP, the more overhead is required for security, but the differences you are seeing seem excessive.
    It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing your Linksys from providing a good clean signal.
    I suggest you perform a simple site survey, using utilities like the following to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible:
    For Macs:
    o MacStumbler
    o iStumbler, or
    For PCs:
    o NetStumbler

  • Can't connect to any secure WiFi network. Help...!

    Hello,
    I am unable to connect to any secure wifi network. Using iPhone 5, Model : MD300B/A, Software : 6.1.4 (10B350). Whenever I try to connect to any secure wifi network, it says password incorrect. But it connects fine with unsecured networks. Double checked the same secure networks with my iPad and it works fine. Tried reseting the network settings and all settings. Updated to latest firmware (6.1.4). Still not working.
    Please help.
    Regards,
    Madhavan

    I have the same problem. I can't connect to any password protected networks. I type in the correct password, but I'm unable to login. I don't have the option for the iphone to forget the network, because I've never been able to log in and therefore there is nothing to forget. The option doesn't even come up. Is anyone else having this problem? It is this way for 2 different networks.

  • HT4199 Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks

    Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks

    Some users with various Wi-Fi connection problems have reported that they were given the following instructions by Apple Support, sometimes with success. I can't vouch for this procedure myself. After completing the procedure, you'll have to recreate all your settings in the Network preference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
    Step 1
    Back up all data.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 2
    Reset the System Management Controller

  • Can't connect to FaceTime, check your network connection try again

    Can't connect to FaceTime, check your network connection an try again keeps coming up when logging in

    1. Make sure software is up to date
    2. Make sure FaceTime is enabled; Settings>FaceTime
    3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
    4. Make sure Push Notification is enabled
    5. Make sure phone number or email address is correct
    6. Hold the Sleep and Home button down (together) until you see the Apple Logo

  • EA6500 can't connect to Router after Time Machine

    Just got an EA6500 - updated to the latest available firmware.
    I've attached 2 x WD NAS and 1 x WD via USB to the unit.
    Everytime AFTER I finished running Time Machine on the MacBookPro (writing to one of the WD NAS), I can no longer login to the router neither from the local IP address nor the cisco cloud connect. The error message that I get (loosely phrased) is: can't connect to Router. Please ensure the router is connected to the internet.
    At this point, all the devices connected to the router (both wired and wireless) still can access the Internet perfectly. Only the router console is no longer reachable.
    Anyone else are having the issue?
    Any ideas on how to resolve it?
    Solved!
    Go to Solution.

    Contacted Cisco support and the person advised me to do a factory reset (eventhough the router is brand new with no customization!!). Regardless, it now works properly. Cisco Cloud Connect still works before, during and after a Time Machine session.
    "When in doubt, try turning the electricity grid off and on"

  • Can't connect WRT54GL router to Motorola Surfboard cable modem SB6120

    I can't connect my router (WRT54GL) to my new cable modem (Motorola Surfboard SB6120).
    Some info:
    1)  Cable modem works perfectly when connected directly to computer ethernet port
    2)  ISP is Optimum Online
    3)  Using Automatic DHCP setting on router
    4)  Using MAC cloning on router
    5)  I can access the router's admin screen from the PC
    6)  I can connect to the router wirelessly, but no internet access
    7)  I've tried powering down everything multiple times, still no internet access
    8)  I upgraded the router firmware to 4.30.14
    9)  The "link" light on the cable modem never lights up when connected to the router
    10)  This is very frustrating
    Thanks

    Dabug wrote:
    Hi
    I've tried two ethernet cables, no luck.  On the router, I get lights for Power, WLAN and the ethernet port that the pc is connected to.  The "internet" light is not lit.
    When the modem is connected directly to pc the link is lit up, just not when it's connected to router.
    The internet light won't turn on as you need to plug something on the WAN port. And that should be the cable coming from the modem.
    When you connected your pc directly to the modem, do you get internet access?

  • Can't connect AE to existing wireless network

    I can't get my AE to connect to my existing wireless network. I saw the other thread on this and followed those steps, but it didn't work. Here's what I did:
    1. Connected the AE to my D-Link DIR-655 wireless router via ethernet cable.
    2. Opened Airport Utility and established a connection to the AE.
    3. Renamed the AE and entered a password.
    4. In the "wireless" tab, I selected "join existing network", chose my wireless network, selected the security type (WPA Personal) and entered the password.
    5. In the "music" tab, I named the speakers and entered a password.
    So far so good. I clicked "update" and the AE restarted. After a while I received an error message informing me that the base station could no longer be detected. According to the directions posted in the other thread, this is actually supposed to be a sign that the AE is now in client mode and all is well.
    I unplugged the ethernet cable from the AE and router and then went to the other room. I plugged the AE into the speakers and then plugged the AE into the wall.
    However, instead of a green light all I have is a flashing amber light, even after several minutes. No connection.
    I reset the AE and repeated the steps above, to no avail. Still a flashing amber light.
    Any ideas?

    I'm having a similar issue. My AE is connected directly to a Netgear WGR614v4 router, and I run through all the steps you mentioned. When I choose to update the settings to the AE, I get the same "error" you mentioned about the AE not being found, and I also took that as a sign that I'm in client mode. I moved the AE to the other room, connected my mini cable to the stereo, then plugged the AE back into the wall. The AE runs through its setup and eventually gets a solid green light, so I'm thinking all is well.
    The problem is that I then log back into the AirPort Utility on my laptop and the AE is not shown in the top left like it should be. After doing a bit of reading, I've figured out that I can manually find it by going to File>Configure Other and entering the AE's IP address and password. Then I get a window showing the details of the AE, its name, network, encryption, etc. However, if I close this window, it still doesn't show up in the main AirPort Utility screen and I'm not sure how to configure it for AirTunes.
    Hoping that's just a bug with the AirPort Utility software, I open up iTunes to see if I can locate it there. I know I should see a pulldown menu at the bottom of iTunes that gives me an option for AE as my audio output method, but the menu is not there. Now I'm completely stuck.
    At this point I decide to start from scratch, so I do a Factory Default reset by pressing down the reset button on the AE as I plug it into the wall. Now it is supposedly reset, so I plug it back into my router, then it runs through a setup sequence and lights up solid green before I've even done anything. It shows up in AirPort Utility with a default base station ID, but my computer won't connect to it at all. I'm hoping I can try to reset it again this evening and at least get back to the normal setup screen, but I'm really not sure what I could do differently at this point.
    This is frustrating and I'm on the verge of giving up, but I REALLY want this to work out.

  • Can't connect to router with non airport wireless

    I try again... my Imac won't connect wireless to my router. It actually connects, Imac says everything is fine, but when I connect to the internet, the colourfull little wheel is spining for hours...and nothing shows up.
    With the same settings, using Airport express, wired on the router, everytihng is working fine. I can't just switch to the other network.
    Any cue?

    You have a non-apple wireles card in the IMAC. Why would you do that?
    Sounds like your wireless card is not getting an IP adddess. Check system preferences - network and verify both the ethernet and the wireless connections are getting DIFFERENT Ip addresses.You have to go to your wireless cards website to find out how to connect it to an AEBS. Linksysy has info on their site. Also your AEBS has to be set up to distribute IP addresses, otherwise, the AEBS and the IMAC may have the same IP adress and the system won't accept that.

  • Can't connect to internet through Airport network

    Previously - worked
    Internet: DSL
    Network: via Airport Extreme
    Computers: 3 (G4 Tower, PowerBook G4, Xbox360)
    Setup: I ran the ethernet cable out of the modem into the Aiport Extreme. Then I ran another ethernet cable into a router which then split the signal into two lines -- one going to the tower and one going to the Xbox. The laptop connected wirelessly. This worked using DHCP assigning multiple IP addresses to all on the network and indeed the two computers surfed the net with ease and I had no problems connecting or staying on Xbox Live.
    Currently - doesn't work
    Internet: Cable (Charter)
    Network: same
    Computers: same
    Problem: I recently switched from DSL to Cable internet for faster speed. Here is what i found: When i connect the ethernet cable directly into the tower from the modem i can access the internet. If i connect the ethernet cable directly into the PowerBook G4 i get nothing. If i try to connect the ethernet cable to the Airport from the modem i get nothing as well. At first all i thought i had to do was change the account settings from that of the DSL to that of the Cable internet -- only there are no account settings for the Cable internet. I literally just plugged in the cable and was ready to go. I have tried resetting my airport to get rid of my previous [DSL] settings and redoing the Airport Setup Assistant to no avail.
    G4 Tower, PowerBook G4   Mac OS X (10.3.9)  

    ok so i unplugged my modem for a few minutes and then plugged the ethernet into the airport and turned the modem back on. now i can get internet on both my laptop and my tower. that works, thanks!
    an odd aside tho is that before, when i was connecting through PPPoE, the laptop would automatically connect to my network (regardless of how many networks the airport card was picking up). now that i have the airport set to just connect via ethernet i have to manually log onto my network every time. is there a setting i'm forgetting about that enables automatic log in or is this just the case with connecting via ethernet?
    here is the next problem, though. i bought a wireless adapter for my 360 and it cannot detect my network. it detects two other different networks that are in my complex but not mine. i have no idea if this is an airport issue or a 360 issue as powerbooks just automatically detect an airport base station. i have tried testing it in the same room as the airport with no luck. the only way i have connected to Xbox Live so far was to hard line an ethernet cable to the 360, shut the modem off, turn it back on and connect that way. if anyone knows anything about the 360 or has had similar problems trying to get their 360 up and running wirelessly through an airport please let me know
    Mac OS X (10.3.9)
    Mac OS X (10.3.9)

  • Can't connect to router through airport (problem with encryption)

    We have a small office network with several computers connected to a wireless router. A while back all the macs using airport suddenly were no longer able to connect to the internet (email still worked fine) while the windows computers on wireless and macs on lan still work fine.
    The router is using WPA personal encryption, and when using this the macs can connect to the wireless network no problems, but then they aren't able to use the internet. as i said though email still works without any problems. We spoke to the tech support at our ISP but macs aren't very common in south africa, so they just suggest we change the encryption from WPA to WEP encryption. I tried both 64 bit and 128 bit but every time i get an error saying: There was an error joining airport network. If I turn off encryption though everything works fine and the macs are able to access the internet without any problems. Anybody have any ideas what might be wrong?

    I am having the same problems since 3 days ago (Imac core 2 duo 20" 2,16). I think it was after the 10.4.10 upgrade.
    I haven't tested if I can connect an open network (without encryption).
    I can't connect to internet using the wifi network... sometimes, i can't even locate the SSID's network.
    Even using windows xp with bootcamp i can't use the network, so it's really strange. This can only be firmware/hardware... cause XP on my mac was able to connect and now it can't too. I tried with other computers (notebook) and i can connect without problems.
    Have you solved this issue ?
    Anyone can help?
    Joao Oliveira

  • Can printer connect to more than one network?

    Hello.
    I just bought the wireless HP deskjet 3050 printer. I've connected it to the internet (network) and it's working perfectly. Is it possible to connect to more than one network? We have more than one internet line in the house so I was wondering if I can set it up for both lines. I understand that I can print with multiple computers on the same network (and I am able to do so), but how about on different networks?
    Thanks.

    No, it only has one network connection device so can only connect to one at time, sorry.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for