Can't connect to secure servers

For some reason, at some point during the middle of the day, Safari quit being able to access secure websites. I can't for the life of me figure out the problem. I didn't install anything new, and I've already run disk utility (All permissions are repaired) and zapped the PRAM, but no change. It's definitely a problem with the computer's software because I've reset my modem and downloaded Firefox, which CAN connect to secure servers. Though, in addition to Safari, Mail is having the same issue, and I can't access my Gmail accounts through it. In all my years of using Safari, nothing like this has ever happened. Any ideas as to what's going on?
PowerBook G4 (Gigabit Ethernet)   Mac OS X (10.3.9)   667 MHz, 512 MB RAM, 40 GB HD

I'm not sure about Panther and the content of the related certificates found in Keychains. The key is getting the certificates back. Incidentally, G-mail is an https site, so that too would be affected by the same issue.
The certificates are installed as part of the OS X installation. One possible avenue is to reapply the 10.3.9 Combined Update. This update may install a new keychains file. Make sure you "repair permissions" after running the Installer. Do not use the computer while the installation is running.
Post back

Similar Messages

  • Can't connect to ftp servers with Passive Mode

    Hello,
    I can't connect to ftp servers with Passive Mode.
    I have Linksys WRT54GL.
    Msg i have:
    [R] 200 PORT Command successful.
    [R] LIST -al
    [R] 150 Opening ASCII mode data connection for /bin/ls.
    [R] 426 Data connection closed, transfer aborted.
    [R] List Error
    and:
    [R] 200 Type set to A.
    [R] MODE Z
    [R] 200 MODE Z ok.
    [R] PASV
    [R] 227 Entering Passive Mode (*,*,114,11,8,147)
    [R] Opening data connection IP: *.*.114.11 PORT: 2195
    [R] Data Socket Error: Connection timed out
    [R] List Error
    Thanks for the help !

    Maybe you need to do Port Forwarding on your router...Check for the Port Numbers for your FTP Server...

  • I can't connect to Adobe servers

    Guys please help, I can download stuff but it says I can't connect to Adobe servers.

    Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    OR
    Asked to sign in after paying may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    or
    http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    Membership and Payments http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html
    Error 16 http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

  • Can't connect with security enabled

    We want to have the strongest security available for our home's wireless network.
    I have an iBook 500 dual usb, OS 10.4.8 with the original Airport card it came with. (Card firmware 9.52)
    I also have a Airlink101 Mimo XR, model AR525W, 802.11G Wireless Router.
    I easily get great wireless connections when no security is enabled with the iBook and Airlink. I can even connect way out in the street or even a few houses down.
    However, when WPA2 Personal is set for the network, the iBook 500 will not connect. I get a message window stating, "The wireless network "Airlink" does not support the requested encryption method".
    (My Mac Mini 1.66 Ghz, Core Duo has no problems connecting via Airport when the WPA2 Personal is enabled)
    When I open internet connect on the iBook and choose "other" for the network,
    I have the security choices listed below:
    NONE
    WEP Password
    WEP 40/128-bit hex
    WEP 40/128-bit ASII
    LEAP
    WPA Personal
    WPA Enterprise
    WPA2 Personal
    WPA2 Enterprise
    802.1x WEP
    The security choices for AirLink101 Wireless router:
    WEP
    WPA-PSK
    WPA2-PSK
    WPA2 Mixed
    WPA
    WPA2
    802.1x
    disable
    I have set the iBook's MAC address properly. What am I doing wrong?
    Thanks,
    llulua
    eMac 1Ghz, iBook 500 dual usb, Mac mini 1.66Ghz Intel Core Duo 2g ram   Mac OS X (10.4.8)  

    You're not doing anything wrong, as far as I can tell.
    Your 5-year-old iBook is simply not WPA2-compatible. It takes AirPort Extreme technology to use WPA2. The original AirPort card can't manage it.

  • I update my iphone 5 to IOS8 and now I can't connect to secure wi-fi networks

    Since upgrading my iphone 5 to iOS 8 I have been unable to connect to secured wifi.I have taken this problem to several Apple stores only to be told that I need to purchase a new one ($269). Phone is only 18 months old. WHY IS THIS MY PROBLEM with Apple software?

    issa4849 wrote:
    Since upgrading my iphone 5 to iOS 8 I have been unable to connect to secured wifi.I have taken this problem to several Apple stores only to be told that I need to purchase a new one ($269). Phone is only 18 months old. WHY IS THIS MY PROBLEM with Apple software?
    Nothing us user here in this technical forum can do to help you, if the people at the Genius already told you what you need to do to resolve the issue.

  • Can't Connect to Apple Servers

    Cant connect to Apple Servers. Can't use iCloud, iTunes Radio, App Store, iTunes Store, FaceTime, iMessage on my iPad Mini Not even Apple's Website Help

    You may be connected to your Wi-Fi network but is your modem supplying internet data to the Wi-Fi router?
    Can you use Safari to browse the web? If you can't, you should look into rebooting (power-cycling) BOTH the modem and the router. If they are separate devices, power on the modem 1st and allow it to stabilize ~60 seconds or so. Next power on the router and allow it to stabilize for ~60 seconds as well. Try again.
    If both the modem and router are in one device, simply power-cycle that device.

  • I can't connect to secure websites including Microsoft

    Hi folks, well as you may have seen I had a bit of a job getting my 865 connected to the network/web at all, but I did!
    Now I have a bizarre problem which though I have found some info on have not found a solution.
    Let me just state that most people who seem to have had this prob are on XP SP". I am on XP SP1.
    I am getting a page cannot be displayed if I try to connect to any Microsoft site, ie hotmail, msn or mcrosoft iysel. I also can't connect to Ebay.
    I can connect to yahoo and my internet bank account.
    I have virus aand spyware checked
    I don#t have a firewall.
    I am on a dialup connection via a wireless network via a wireless network.
    I have tried all the solutions I have seen on the microsoft site.
    I will stop there in case this really is the wrong place to post this. However, it is a problem I don't have on any of the other computers on the network which includes XP, 98, laptops and desktops.
    Interested in your comments, cheers, Epirb.

    Hi Guys,
    Yes, I have tried all the steps on the belkin site, they are the same as the microsoft suggested.
    I cannot check the verisign one, it will not load on the mega, it does so on all other computers on the network.
    Yes I can get a sucessful connection to all sites with an ad hoc connection throught the host PC with a crossover cable.
    ALL firewalls disabled whilst I sort this out.
    Have not chased up the MTU issue, I am fairly convinced it is a red herring with a tiscali dial up connection (Ie no broadband, no AOL)
    I have upgraded the firmware on my USR wireless acess point.
    It has been not only a pain but made no difference.
    I have tried various different network configurations, all to no avail.
    I have a further question though. It seems that all the troubleshooting advice that I have been following relates to problems connecting to secure sites, ie ones with the prefix https:// I cannot connect to some http:// sites either, ie Ebay hotmail or plain old microsoft. Am I missing something here?
    Anyone here with nothing better to do than review all this post and suggest where I may be missing something so very obvious it is embarrasing?
    Thanks for continued interest, Epirb.

  • Can't connect to any servers.

    Firefox will not connect to any servers after I updated my computer. After not using it for two months. I have to use outlook to get on the internet.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • Safari can't connect to any servers or webpages

    Hi,
    I have my internet running without issues. I use Firefox, and currently viewing this page and typing.
    Also I can access an FTP server elsewhere in another country.
    However when I open Safari, I can't seem to get on any websites with "Safari can't connect to the Server" no matter where I go.
    I tried to go on Apple site to download Safari but only available version is the Snow Leopard.
    Any idea how I can fix this problem?

    Update your DNS to a known-good server, such as OpenDNS or Google DNS.
    Reference Safari 5.0.1 or later: Slow or partial webpage ... - Support - Apple for more information.
    If using known-good DNS doesn't resolve the issue, turn off plugins and extensions in Safari. Check to see if the issue persists. If it doesn't, then one of the plugins or extensions is causing the issue. Follow Safari: Unsupported third-party add-ons may ... - Support - Apple for more information.
    If the issue is not resolved by addressing the DNS or add-ons, then start by emptying Safari caches. If that doesn't help, then reset Safari (note: you will lose auto fill contents, such as saved passwords, for example). If it still doesn't work, there are additional steps, but the DNS or add-ons are most likely the cause.

  • Safari can't connect to some servers but FF can??

    Safari can’t open the page “http ://www.xxxxxxx.com/” because Safari can’t connect to the server “www.xxxx.com”.
    I've been getting this all day but not with all sites. I tried FF on the last one where it happened and it opened it fine. I've even got this trying to open a page at Apple Support. How can I fix this?
    It happened with both Safari 3.2.3 and with Safari 4 after I installed it today.
    Computer: Powerbook 12" 1.5GHz, MacOS 10.4.11.
    Thanks

    I have just strated having the problem outlined above....with www.yahoo.com and www.google.com (both directly connecting to Google, and using the built-in search box in Safari). Others seem to be fine. Have tried the suggestion above - no luck. Also tried "Reset Safari" to no avail.
    Has anyone discovered a solution?
    I could try re-installing Safari I s'pose.....

  • Can't connect to Adobe Servers behind Sonicwall TZ 200

    Since being behind a Sonicwall TZ 200 I can no longer connect to the Adobe servers. We have opened port 80, 443 and it was also suggested that we open ports 1935 and 8080 which we did but we still aren't able to make a connection. If we connect this Mac to a hot spot we can connect fine so we know it's the Sonicwall causing the issue.
    This is a Mac running OS X with no antivirus/firewall on and no proxy settings.
    Does anyone have any suggestions?
    Thanks,

    Thanks for the link John. I have actually read through that thread and a couple of links within it linking to the Adobe troubleshooting page and another thread. Still no success though. Adobe can't seem to figure it out either. I can't imagine what the issue is a Sonicwall is a widely used security appliance/router and our network isn't complex.
    Thanks

  • Can't connect to secure iTunes server to download music

    I have had no issues ever with iTunes store. But recently I have been unable to download music or access my account. I can listen to sample tracks in iTunes store however.
    I have checked my firewall which is OK.
    I ran the diagnostic check within iTunes help and here are a few lines extracted from the report.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was unsuccessful.
    The network connection timed out.
    Secure connection attempt to iPhone activation server was successful.
    I followed the help suggestion and confirm that
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    As you can see all works except secure connection.
    Any ideas out there as to the cause
    Thanks

    Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from running. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
    Check the settings for your utility and if necessary remove and re-enable the exception for iTunes (consult your utility's documentation for the appropriate procedure). You may also need to check the built-in Windows firewall as well.
    Hope this helps.

  • Can't connect to Secure Airport Express Network with my PC Laptop

    Hello-
    I have a PC laptop with Windows XP and a wireless card that I've used to successfully connect to unsecured Airport Networks many times.
    Now I have a Security-Enabled network in my apartment, and I can't figure out how to connect!
    When I attempt to connect, it asks me to enter a "Network Key." I've tried using the numbers on the underside of the AirPort Express itself, as well as the password my roommate assigned to the network (which I used to successfully connect with my PowerMac G5). None of these work.
    Does anyone have any ideas for me?
    Any additional information needed?
    THANK YOU!!!
    -Darnell from Chicago

    What you need is the "Equivalent Network Password" of the AirPort Express Base Station (AX). This Apple Tech article should help: http://docs.info.apple.com/article.html?artnum=106864

  • Upgrad to 10.4 - now can't connect to my servers

    I have an older non Intel Mac Mini that was working fine on 10.3.9. Decided to upgrade to 10.4 yesterday.
    Everything is working okay - I can connect to the Internet and email no problem - EXCEPT, when I try to log on to one of my servers, I get the following error:
    The alias "Server" could not be opened, because the original item cannot be found.
    I can't delete the alias, there is no way to access the server to show the alias where it is, network diagnostics thinks everything is just fine!
    It is said the definition of insanity is checking the same settings over and over while expecting different results.
    Any thoughts? About this issue, not my mental state?

    FYI - I had upgraded to 10.4 from a CD, and when I upgraded that to 10.4.11, I was able to connect to my local servers again!

  • Can't connect to IRC servers...at all

    I've tried several different clients(Pidgin, Xchat, irssi), tried toggling the firewall on/off(Firestarter front-end), tried using OpenDNS's DNS servers, and I *still* get a timeout when trying to connect to freenode, efnet, and any other irc server. In fact, the problem extends to my XP partition, and I'm really unsure how to proceed. I'm behind a router, which at first glance makes for a straight-forward solution, however it didn't work without the router either(just connecting the ethernet cable to the wall).
    I can track the issue back to when I first moved in with my sister, in her apartment. The ISP here is Cox Communications, but I seriously doubt they'd block completely block IRC(both servers and clients). I could previously connect to whatever IRC server(when I lived in my dorm, that is), which worked on the college's LAN.
    Any advice on how to even begin to troubleshoot this is welcome.

    *wonders exactly how smart it is to do this*
    Selected device wlan0, address 192.168.2.44, port 47724 for outgoing packets
    Tracing the path to wlan0 (208.69.36.132) on TCP port 80 (www), 30 hops max
    1  192.168.2.1  3.371 ms  3.811 ms  3.663 ms
    2  172.16.26.1  2.969 ms  2.266 ms  2.046 ms
    3  10.8.0.254  6.236 ms  5.883 ms  4.759 ms
    4  wsip-24-248-9-161.br.br.cox.net (24.248.9.161)  6.851 ms  5.782 ms  6.351 ms
    5  ip24-248-104-194.br.br.cox.net (24.248.104.194)  7.183 ms  13.666 ms  6.004 ms
    6  ip24-248-104-178.br.br.cox.net (24.248.104.178)  6.800 ms  6.473 ms  7.104 ms
    7  dalsbbrj01-ae0.r2.dl.cox.net (68.1.0.142)  17.645 ms  22.788 ms  18.796 ms
    8  ae-0.r21.dllstx09.us.bb.gin.ntt.net (129.250.2.59)  18.993 ms  23.157 ms  19.622 ms
    9  p64-2-1-0.r21.chcgil09.us.bb.gin.ntt.net (129.250.4.113)  39.548 ms  44.509 ms  41.603 ms
    10  * * *
    11  fa-9-16.r01.chcgil09.us.ce.gin.ntt.net (128.242.180.46)  53.461 ms  40.164 ms  43.150 ms
    12  208.69.36.132 [open]  39.659 ms * 59.492 ms

Maybe you are looking for

  • Songs on ipod annot be updated because all of the playlists ..dont exist!!!

    Went to update my nano and got the above message although all the playlists are apparently still there in iTunes and can be played on the computer. Do I need to reinstall iTunes on my computer? Can I export the playlists to my music on windows and dr

  • Error while trying to access data from virtual provider - Technical Content

    Hi,   I am trying to install the new BI 2004s technical content.  I am done with the installation I am trying to display data for the remote cubes delivered i.e. 0TCT_VC11/21 etc. but getting an error: Error reading the data of InfoProvider 0TCT_VC11

  • Extraction from R/3 SET / Report Writer

    Matez,   How do I extract a SET created with Report Painter in SAP R/3 to SAP BW ?   My client have created SET ID for various Financial Items.   Now, I need to import this SET ID / Hierarchy to BW !   Kindly advice...

  • DHCP not handing out IP leases to non-domain members

    Recently gotten DHCP working, server gives out IP address for domain computers only, non-domain computers do not get a lease and if I manually assign an IP and the device will gain network and internet access. I used the wizard to create the DHCP IP

  • Promise PDC20579 SATA/RAID controller

    I'm trying to get the piece of shit working with Linux, but haven't had any luck. I'm not sure which Promise add-on cards use this chip as this one is built into my mobo, where it provides 2-SATA and 1-PATA port. I'm using the PATA with 2 drives (160