Can't connect to specific number through CUCM

There is one number that our customer's site cannot connect to through CUCM, which is very strange.  What could possibly be causing this? 

Janna,
Many things, you need to give us some more details, i..e system you are using CUCM, CME, etc, call flow details, if external call what type of circuit is used i.e. PRI, SIP trunk, POTS, etc and appropriate debugs for the circuit. If you can answer these we can hopefully steer you further.
HTH,
Chris

Similar Messages

  • CC01 how can i choice a specific number range ?

    Dear
    In trx. OS53 i have defined two different internal number range object for change master  record.
    When I create a new change master how can I choice a specific number range ?
    Thanks.

    Hello,
    If my understanding is correct then its internally in the system for the type - Change master and ECR the change number
    object used is AENNR and where in you can assign a common number range group and it will be used for creating change
    numbers of both these types.It's not as like the production order type where you can link a different number ange for each
    order type.
    In the standard SAP  to set of number range (one internal numbe range and one for external will be assigned) exists.so aaume for CC01 you can make use of the internal number range,where during CC01 without any value for the field change number you can proceed.When creating through CC31 you can make use of external number range by giving the change number as the input and you save the data.
    Hope the information is useful
    Regards

  • How can  I capture a specific number of screen caps

    Using final cut or any other application, how can I capture a specific number of screen caps? Each video will have a different length.

    Bob,
    Please clarify your question. Are you asking about screen captures? If so, what software are you using and what does this have to do with FCP?
    -DH

  • Can i connect to the database through the internet

    hi all
    i installed a database oracle 8i enterprise edition on a pc that exists in a town far from me . i wonder can i connect to this database through the internet from my house
    please i need a answer
    thanks in advance

    You can connect from an Oracle client to any Oracle database in the world that meets certain requirements.
    First you need an open network connection between the two points so either no firewall exists between the two stations or the firewall(s) have been configured to allow Oranet traffic. This means both databases must have access to the Internet and certain ports are open.
    Second you will need the IP address and port for the remote listener, which in turn must be up and running on the target server.
    Then you must have the Service Name or SID and a valid username/password combination for the target database. Plus the username must have create session privilege.
    That should be about it.
    HTH -- Mark D Powell --

  • Can't phone a specific number on my 7373

    Can anyone help - my neice can't phone a specific number on her phone does anyone know what the problem could be. Have checked the number barring etc. Any tips ??

    Is that a normal number or a network service number? What happens when calling? No one can help you unless you provide more details.
    Mobile Royale - Latest News, Reviews and Software for Mobiles
    Aero Everyday - Aviation News and Insights
    GoMobile Forums-The best mobile technology discussions
    Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
    Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam !

  • Can we maintain role specific number ranges?

    Can we maintain role specific number ranges in sapcrm..ex i want to give number range between 0-100 to role sold-to-party. is this possible ?
    Thanks and Regards,
    Ravi

    Hi Ravi,
    You cannot maintain an explicit relationship between the number ranges in CRM and roles.
    To configure number ranges you have to define groupings in CRM.
    While you create your BP, it is this point of time when you have to specified the grouping you want to use (indirectly the number range assigned to it). This will decide the number for the BP.
    Best Regards,
    Pratik Patel
    <b>Reward with POints!</b>

  • ERROR#: 2002 can't connect to MySQL server through socket '/var/mysql/mysql.sock'

    I was following this adobe article (
    http://www.adobe.com/devnet/dreamweaver/articles/php_macintosh.html)
    to set up PHP and MySQL and connect a MySQL database to dreamweaver
    in Mac OS 10.4.8 and I kept getting:
    "Can't connect to MySQL server through socket
    '/var/mysql/mysql.sock' ERROR#: 2002".
    After a lot of searching I came across
    this
    article which said that there was an error in the PHP and MySQL
    connection or something.
    Anyway all I had to do was type (in a TERMINAL window):
    $ sudo mkdir /var/mysql
    $ sudo ln -s /tmp/mysql.sock /var/mysql/mysql.sock
    and that fixed the problem, otherwise the adobe article
    worked very well.
    Check out the "this article" link to get the fix straight
    from the horse's mouth.

    I was following this adobe article (
    http://www.adobe.com/devnet/dreamweaver/articles/php_macintosh.html)
    to set up PHP and MySQL and connect a MySQL database to dreamweaver
    in Mac OS 10.4.8 and I kept getting:
    "Can't connect to MySQL server through socket
    '/var/mysql/mysql.sock' ERROR#: 2002".
    After a lot of searching I came across
    this
    article which said that there was an error in the PHP and MySQL
    connection or something.
    Anyway all I had to do was type (in a TERMINAL window):
    $ sudo mkdir /var/mysql
    $ sudo ln -s /tmp/mysql.sock /var/mysql/mysql.sock
    and that fixed the problem, otherwise the adobe article
    worked very well.
    Check out the "this article" link to get the fix straight
    from the horse's mouth.

  • I recently updated my iPod touch to sync through iCloud - now can't connect to the internet through wifi, my macbook air is working as we speak

    I recently updated my iPod touch to sync through iCloud - now can't connect to the internet through wifi, my macbook air is working as we speak. ive tried 'forgetting this network" in settings; tried turning off and on again; and pulling my hair out! The last was equally useless and a little painful!

    Try:
    - Resetting the iPOd. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Pwer off and then back on yur router
    - Reset network settings: Settings>General>Reset>Reet Network Settings
    - iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal ?

    I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal .i live in a three story home and my linksys is in the basement. I have one cable on the top floor where most of my computers/ipads are.

    can i connect a time capsule through cat 5 cable for my apple products and to boost my signal
    Yes, configure the Time Capsule to create a wireless network using the exact same wireless network name and password as the Linksys wireless network.

  • Can i get the imei number through icloud if i lost my phone

    can i get the imei number through icloud if i lost my phone

    Hi Snowflake10456,
    I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues accessing iCloud because you have set up two-step verification and you no longer have access to your trusted device, you may find the following article helpful:
    Frequently asked questions about two-step verification for Apple ID - Apple Support
    On the other hand, if you are in the process of trying to set up iCloud Keychain and are not receiving the verification code, you may find this article more useful:
    Get help using iCloud Keychain - Apple Support
    Regards,
    - Brenden

  • Can't connect imac to internet through Airport Express

    Hello
    I am trying to connect my new imac (2.4Ghz,OS X 10.5) to the internet through my Airport Express (v6.3) but have encountered some problems.
    The set up goes like this:
    Cable Internet <wired> TP-LINK Router <wired> AE <wireless> imac
    The internet is coming from my landlord on the bottom floor of my apartment so I can't change the router.
    The router is assigning a static IP to my AE (192.168.5.101).
    I am using WEP 128 bit security.
    I have set the AE through Airport Utility to act as a Bridge.
    On the imac I set the Network preferences to manually select an IP address (192.168.5.110) which is out of the range of the Router (192.168.5.101-108).
    The AE connects and lights up green and the imac recognises the AE but I still cannot access the internet...
    I have also tried to wirelessly connect my PC laptop to the AE using other static addresses but I still can't connect to the internet.
    Can anyone please help??
    Regards
    Starwolfgang

    Hello Starwolfgang. Welcome to the Apple Discussions!
    The router is assigning a static IP to my AE (192.168.5.101).
    Are you sure that this provided IP address is static? If so, you also need to note the provided DNS server(s) IPs as well.
    On the imac I set the Network preferences to manually select an IP address (192.168.5.110) which is out of the range of the Router (192.168.5.101-108).
    Since you configured your AX in bridge mode, your computer will be dependent on the NAT (& possibly DHCP) services provided by your apartment's router. Assuming that your landlord doesn't filter out any IP addresses and that the IP address you set is valid, you need to compare your iMac AirPort's DNS server address settings with that provided by your apartment's router to be sure they match.
    Finally, assuming that your apartment provides you with an Ethernet jack, if you connect your iMac directly (via Ethernet) can it access the Internet?

  • Blackberry 9320 can't connect to the internet through WIFI

    Dear all
    I have problem connecting my Blackberry 9320 to the internet via the wifi. I have tried all settings but still can't connect. I connect to the WIFI but when I try to connect to the net its says can't connect to the internet if the problems continues contact your internet service provider. I had the Blackberry 8520, I could connect to the net through the WIFI easily but with this I really don't know where the problem could be. I really need your help

    If it says "Contact your service provider", then i don't think it's a problem with BB's end. You need to contact your carrier.
    God is Great

  • Can not connect to Itunes Store through Apple TV.

    I am trying to rent a movie from Apple TV and keep getting a message saying that it can not connect to Itues Store.

    I don't have the parental controls turned on. I have tried to sync a video I purchased on itunes on my macbook and it will not transfer and comes up with an error that the apple tv cannot connect to the itunes store to authorise.
    I'm connected to the internet through a web proxy, however, itunes works normally through this on my macbook and I can download without problems, so I can't understand why the apple tv won't connect to the itunes store.

  • Can't text a specific number

    I have an unlocked iPone.  Have not had a single problem with it, albiet this one.
    For some reason I can't text a specific international cell - Amy.
    I purchased this handset in the US and text Amy with no problem.
    Since returning to NZ I have not be able to text her.
    Today, I swapped sim cards with my flatmates iPhone.  With my SIM in my flatmates iPhone I was success in texting Amy.  With his SIM in my iPhone I couldn't text her.
    Help!!!!

    Hi dlmilla.
    Are you trying to send via iMessage or via traditional SMS?
    How does the number looks when you trying from your phone? Do you have the countryprefix before the number?
    Exempel, here in Sweden our country prefix for telephonenumber is +46. So if I am outside the country, say Germany, then I need to but the +46 before the number if I will contant someone with a swedish SIM.
    Here you have list of countrycodes  http://en.wikipedia.org/wiki/Country_calling_code
    Hope that helped.

  • Failure to connect a specific number to Philippines on Skype phone call. Texts go thru but not calls

    One specific  number in Philippines always drops on calling but texts go thru and are acknowledged ?

    Hi gki1977,
    Sorry to hear about this. If you fill out the contact us form located in the about me section of my profile, we will take a look at this for you.
    Cheers,
    Chris
    BT Mod Team.
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Maybe you are looking for