Can't connect to the internet at all

I recieved an email today stating that my phone line and broadband service has been activated at 3:30am this morning. My home hub arrived today, and upon trying to connect I am greeted with a orange light, and a flashing red one on the router. Has my line been activated? Because I live above a club and worry that BT may have activated the internet for the phone line downstairs, not upstairs.

According to this, you have to wait until tomorrow http://btsupport.custhelp.com/ci/fattach/get/3445634/1386322208/redirect/1
If you found this post helpful, please click on the star on the left
If not, I'll try again

Similar Messages

  • All of our iOS devices are displaying the message that they can't connect to the Internet.  All show good wifi connections.  Our Macs all connect to the internet just fine suggesting that the network is good.  I'm stumped.

    Airport Utility on the Macs show good internet signals but on our two iPads and my iPhone 5 there are no indications of internet connectivity.  One of the iPads is running iOS 7 but the other is still running iOS 6.  The iPhone 5 is updated to iOS 7. 
    Is there a setting switch that if set incorrectly would create this problem?  Like I said before, all the iOS devices stopped internet connectivity at the same time. 
    Update:  Well while I was typing this I was called away to help get people to bed etc.  And when I got back I tried all four iOS devices and, now, they all connect to the internet.  I don't understand it.  Two iPhones, different iOS versions, and two iPads, different generations and also different iOS versions, all decided that they would disconnect themselves from the internet but stay connected to the wifi network.  Somebody must have an explanation for what just happened.  Remember it isn't the router because the Macs all had uninterrupted internet connections.  Weird!

    I used to have a satellite connection to the internet. When ever the power went off I was told to turn on the devices in a specific order for them to work properly.
    Try shutting off every device including all iPads, iPhones, computer, Wi-Fi router and Satellite modem. Then turn them on one at a time in the order listed below. Be sure to wait until each device completes its start up routine before starting up the next item. When my satellite modem was restarted it often had to download an update. The time this took varied with the update. So be sure the Satellite modem is up and connected to the Satellite before going to the next device.
    1. Satellite Modem.
    2. Wi-Fi Router
    3. Your computer. Check to see that your computer connects to the internet.
    4. iPad or iPhone and remaining devices one at a time.

  • I upgraded to 4RC and now I can't connect to the internet at all.

    I deleted Firefox, and now even with IE, it won't connect. With Firefox, it was saying something about the proxy settings, now with IE, it says the remote device or resource won't accept the connection. Please help!!

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * [[Firefox cannot load websites but other programs can]]

  • I've lost my iPhone5 like 40 hours ago. I already turned the Lost mode on with Find my iphone app. But my phone has no data plan so it could not connect to the internet at all. I reported to the police, too. What else can I do? Can anybody advise?

    I've lost my iPhone5 like 40 hours ago. I already turned the Lost mode on with Find my iphone app. But my phone has no data plan so it could not connect to the internet at all. I reported to the police, too. What else can I do? Can anybody advise?

    No...see the link I posted:
    If you did not enable Find My iPhone on your missing device
    If you did not enable Find My iPhone before it was lost or stolen, you can't use it to locate or protect your device, but you can still follow these steps:
    Change your iCloud password to ensure that no one else can use your device to delete or make changes to your iCloud data.
    Report your lost or stolen device to local law enforcement and your wireless carrier. Apple doesn't track or flag lost or stolen products, but you can use My Support Profile (supportprofile.apple.com) to find a list of serial numbers for products that you've purchased or registered with your Apple ID.

  • I have full bars but i can't connect to the internet. I've done all the usuall thing  like reset the ipad reset my internet security but everytime it says "safari cannot open the page because it is not connected to the internet" Any ideas?y

    I have full bars but i can't connect to the internet. I've done all the usuall thing  like reset the ipad reset my internet security but everytime it says "safari cannot open the page because it is not connected to the internet" Any ideas?

    As with previous posts this is usually a DHCP issue and occurs frequently especially with routers connected to Cable Modems or those Micro-Cell towers.
    Unplug all Routers, AirPorts (or other off brand Wi-Fi broadcast units) and any other Wireless broadcast unit that might provide you with a WDS (often other AirPorts feeding off the signal of the AirPort closest to Cable/DSL Modem) and best to totally power down the Unit affected; lastly either hold a reset button on Cable/DSL modem for 30-45 seconds or actually power it down if an option (not suppose to power down Cable Modems that have Telephony for some odd never completely explained to me reason).
    Let Cable/DSL Modem re-boot till 'all green lights'. Then power up each device involved in order from closest to farthest waiting each time for completion of initiation. Micro-cell towers can take 10 minutes to completely re-boot and you must wait for across the board green lights in my experience. Even WDS can add a few minutes till all green on mother AirPort unit.
    Only NOW may you re-start the offending device and see if it will connect. Works about 99% of the time!

  • After update I can't connect to the internet in no way, shape or form

    I rarely update because: 1) something always breaks when you update (like now) and 2) I don't like to deal with new crap like GNOME 3. Anyway:
    I bought a new router (TL-WR1043N) and configured it with an old Ubuntu because connecting to 192.168.1.1 didn't work on any of my Arch Linux installations. Now... here's where it all starts... I can't use the 'n' wireless on my laptop since I have to install something to use WPA, and to install that I need to update, but I don't want to deal with GNOME 3 and Firefox >3. But I gave up eventually gave up and connected my laptop to the router by Ethernet cable. Setting that up was very easy: 'ifconfig eth0 up; dhcpcd'. Voila! I updated my whole system and restarted. To see how badly I damaged my system I opened Nautilus (I use Openbox with some GNOME programs): shock and dismay, the fonts are visible from the moon. I guess I'll have to quit using GNOME programs completely now but I expected that. I used to use KDE back in the day and when KDE4 came forth from that unholy pit, I immediately abandoned it for GNOME. This time we had more time to prepare, everybody knew what GNOME 3 was going to be. I started using Openbox quite a long time ago.
    Anyway: Now to fix my wireless right? WRONG! I can't connect to the internet on cable to get the packages for wireless. I installed Windows 7 64 on the same laptop and it connects to the cable. Ubuntu 9.10 Live also connects, but due to the changes of rc.conf and network stuff I can't connect at all with Arch Linux.
    So I decided to abandon it completely and reinstall from scratch. But the Live CD also doesn't work. With all the ways I've tried it all comes down to this:
    dhcpcd always times out waiting for a carrier and 'ip addr' shows 'eth0: <NO-CARRIER, ....' if the interface is up. I'm not sure what information I should give you, but I can't paste any here since I can't connect to the damn internet on that laptop.
    About the router: the cable is plugged on port 1 and the LED for it flashes if I reboot the computer. In Windows it stops flashing while it connects and flashes again when connected. I removed 'network' from DAEMONS and it flashes till I start it with '/etc/rc.d/network start'. This hangs for a while and returns '[DONE]' even though it doesn't work and the LED never flashes again on the router.
    In rc.conf I have exactly what the example says for DHCP. In any case, it doesn't work with the Live CD either.
    EDIT 1: From lscpi: painstakingly typed:
    06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
    07:00.0 Ethernet controller: Realtek Semiconducctor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
    EDIT 2: Just to be clear: I can use the wireless on the laptop on the Live CD, but I want to use the cable because of the greater speed (94Mbit/s on cable 60 something on wireless n, 20 something on g) and because I rarely move the laptop.
    EDIT 3: lspci -v shows "Kernel driver in use: r8169   /   Kernel modules: r8169", so the driver is loaded.
    EDIT 4: So if I boot from the CD. ip addr shows:
    eth: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
        link/ether 00:1d:92:...etc... brd ff:ff:ff:ff:ff:ff
    And  the LED flashes. When I type: "ifconfig eth0 up" it stops, never to light up again and ip addr shows: "eth: <nO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    Last edited by imtired (2011-09-08 12:36:51)

    When you're in Arch, use output redirection
    lspci >lspci.out
    then boot into Ubuntu or something where you can access the files and the BBS,  Of course, don't forget to use a new file for each command output.
    The new network config in rc.conf is not that complicated (wired anyway; never used wireless).  OTOH I've had issues on two machines where I have to restart the network daemon (rc.d restart network) or rerun netcfg (netcfg eth0) after boot to get connectivity. And I still haven't come to grips with the ip command.

  • Can't connect to the internet

    Ok. so i did a search and didn't come across any other problems like the one I'm having.
    Let me start off by stating that my laptop is an ibook g4 bought feb, '06 (yes the apple care just ran out).
    I'm having a problem connecting to the internet on my ibook, running through a d-link wireless router. I'm using my imac to connect to the internet currently (which works fine by the way). It also is connected through the wireless router.
    My ibook has a strange ailment. I open up Safari and all I get is a blank screen, the page is trying to load but the status bar is going no where and does the same in Firefox. So first, I opened Network diagnostics, but the computer freezes and I have to do a hard shutdown. (holding the power button). Next, I tried Disk utility. Verified Permissions, Repaired Permissions, everything is fine. I tried to Verify Disk, and again the computer freezes, will not let me force quit and I am forced to do another hard shutdown. I do the thing where you hold down some key while you're starting up to get into the disk utility so I can repair the disk. This returns clean as well. I downloaded techtool off of my Applecare disk. Did the tests, everything passes. So what's the deal?? I've tried to reset the pram. I even did the Apple Hardware test, everything passed.
    I thought it could be my Airport card? It recognizes that there is an internet connection in the top right corner, I even have great signal strength (mostly because I've tried this sitting right next to the router). But still, I can't connect to the internet. Any one have any ideas? I don't know what else to try! Please help!

    so i can't believe i didn't try to connect it directly to the router with the ethernet cord. This actually worked. But it still didn't solve my wireless problem. I'm not willing to let my laptop become a desktop. I'm already wired to a plug b/c the battery is slowly dying and has a life of about 5 minutes. I'm not willing to give up my wireless internet too.
    I guess now it's got to be the airport card? how do I confirm this? and if it is how much would a new one cost and can I install it myself??

  • Can't connect to the internet with Airport OR ethernet cable

    I know many other people are having problems with airport not being able to connect to the internet. I've never had any problems with my mac before, but 2 days ago, it started to act really funny. When i turned it on, my time and date were changed to Jan. 1, 2000, and I kept on getting notifications about configd and mdnsresponder wanting to connect to the internet. I did a little research and fixed that problem. Then, a few days ago, my internet was dropped from my computer completely, and I've never been able to connect via airport since.
    The main problem is that even when I plug the ethernet cable into my mac, I can't connect to the internet either. It worked a few days ago, but now my computer can't even connect. It registers that the cable is in the computer, but thats' about it. The Network Diagnostics assistant tells me to restart themodem, and that hasn't been helping at all. Any helpwould be appreciated.

    First Reset your Pram to see if resets you clock (the different Date caused the problems. Plus open System Preferences->Date & Time pane. In there make sure you set the current date/time and se if you can have the Mac automatically update the time from a Time Server.

  • I put the BT WiFi app on my iPad Mini and now I can't connect to the internet.  Please help

    I put the Bt WiFi app on my iPad Mini  and now I can't connect to the internet.  Please Help

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Some of my Mac apps can´t connect to the internet, while Firefox can

    All of a sudden, Safari, ITunes, Software Update, can´t connect to the internet.  It happens in my office and in my house.  Have not checked other networks.  Firefox wors fine, as does Mail (for now).  What can be the problem?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    As Guest, test. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

  • Was always working and today I get a message that it can not connect to the internet. Internet Exployer works fine. So, I tried uninstalling the program and reinstalled. Still did not work. check out the proxy and firewall no problems there.

    I get a message can not connect to the internet when trying to open Mozzila Firefox. It was working fine until my internet service went down. Once back up it was not working. I have tried installing and uninstalling the browser. I have looked at the firewall and proxy on my computer. Still not working Internet Exployer works fine. Deleted all cookies also.

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

  • Why is my wi-fi signal is going strong, but I can't connect to the internet?

    Before I begin, here's my set-up:
    My wi-fi signal (on the top right side of my MacBook) is going strong (with all the bars). And a green light is lit up on my Airport Extreme. For some reason, I still can't connect to the internet/use Apple Mail/use iChat. I don't think that there's anything wrong with my MacBook, as my wife isn't able to connect to the internet with her iPad or with her laptop either.
    I'm thinking that I have the strong wi-fi signal showing up on my computer because it actually is connecting to the Airport Extreme, yet the airport extreme somehow isn't connected to or isn't able to connect to the router. Would this be correct? Any ideas of how I might fix this? I tried unplugging and replugging everything for a few seconds. However, whenever I use a hardwire ethernet connection to my MacBook, my internet and everything works.
    ALSO, of note, I just purchased an Apple Time Capsule. I just realized that it functions as a wi-fi base. Any chance that my computer, my wife's iPad and laptop are just connecting to the Time Capsule instead of the Airport Extreme?
    Any answers would be more than appreciated. Thanks!

    Deselect Proxies if selected.
    Safari > Preferences > Advanced > Proxies:
    Click "Change  Settings" button
    The network preferences window for Proxies will will show up with "Proxies"
    tab selected.
    Under "Select Protocol", uncheck any box if selected.
    Click "OK", then  "Apply"

  • Blackberry 9320 can't connect to the internet through WIFI

    Dear all
    I have problem connecting my Blackberry 9320 to the internet via the wifi. I have tried all settings but still can't connect. I connect to the WIFI but when I try to connect to the net its says can't connect to the internet if the problems continues contact your internet service provider. I had the Blackberry 8520, I could connect to the net through the WIFI easily but with this I really don't know where the problem could be. I really need your help

    If it says "Contact your service provider", then i don't think it's a problem with BB's end. You need to contact your carrier.
    God is Great

  • New MBPro...airport connection established but can not connect to the internet...help! suggestions?

    Hi all, trying to set up my MBPro...seems to be connecting to my AirPort Base Station w/out any troubles...but when I try to get online I'm getting a "can't connect to the Internet" message. I checked my network settings, restarted multiple times, etc. No luck. Seems to be a problem with the IP address (I think)...but not sure how to resolve it. I have an iMac and iPhone in the house that are able to connect and get online w/out issues. Any thoughts? TY!!

    Are you asking the make/model of the computer or the AX base station?
    Neither, I was interested in the make/model of the cable modem.
    Our ethernet connection was fried in an electrical storm so we had to go wireless.
    Electrical storms are never a good thing when it comes to electronics. What was/is your current network configuration? Is it something like the following?
    Cable modem > (Ethernet cable) > AX > (wireless) > wireless devices
    Is there another router, other than the AX, in the configuration? ... or an Ethernet switch? I'm just trying to understand your network to best advise you on how to configure the AX.

  • The wireless symbol is present and indicates a strong signal, but I can not connect to the Internet.

    The wireless symbol is present and indicates a strong signal, but I can not connect to the Internet.  I'm  on my home network and have never had trouble before.  My iPad is current on all updates. I have tried to reset the network settings, nothing has worked.  I can connect to the internet via my iPhone  personal hotspot and all other wireless devices are operating normally on my home wireless network.

    I am also having this issue. My boy just got an iPod 4 touch, upgraded to iOS 6. I have a D-Link DGL-4300 108G Wireless Gaming Router. With the iPod I can connect to the router, get an IP address (either DHCP or Static) and even browse through the menu on the router, but I can't connect to the internet.
    With a DHCP IP address the iPod give the error "Not connected to the internet" with the static IP address it takes a long time when trying to connect to a website but then it gives the error "server stopped responding".
    Clearly the issue is in some setting in the router. I've tried setting up a filter so that the iPod will always have access based on MAC address. I've tried changing the various wireless connection settings, all to no avail. I would greatly appreciate some guidence here.

Maybe you are looking for

  • Parental controls in iTunes don't work for TV Shows?

    Using parental controls - i can hide/block Movies & explict music content - but doesn't appear to work for TV Shows marked "Caution" - any ideas? Help would be appreciated. thanks       

  • Cisco 6004 VPC issue

    Hi Friends, We are experiencing issue in Cisco 6004 while creating  VPC. We are unable to configure VPC because upon enabling the feature  it is showing error. Request if anybody can help us here. TEST(config)# feature vpc Error: while enabling/disab

  • Problem with receive files

    Hello! I have a problem receiving image files. Instead of receiving file, I receive a link to skype website with the file.

  • Drag & Drop functionality

    Hi Friend I'm using flash professional cs5.5. I have doubt in drag and drop functionality. 1) Drop a object in mouse up 2) Drag the object in mouse down Two Movie-clip (Button) on the stage. I have clicked the first Movie-clip, image will added to th

  • IT0009 - Payment Currency

    Can anybody tell me how this field 'Payment Currency' is getting defaulted?From which table?