Can't connect to the internet on new MacBook Pro
But I can with every other device and computer in the house. So when I run Network Diagnostics on the new MacBook Pro I see
Wifi = Green
Wifi Settings = Green
Network Settings = Green
Internet = Red (failed)
Server = Red (failed)
Ive tried connecting directly to the modem via ethernet, same result. But using my MacBook Air (on the same home network) everything is groovy, so I don't see a network issues here, but some setting on the new Mac that I can't determine. I'm running OS X Yosemite 10.10.1 (had to run this version b/c I used Time Machine to build this one and the old MacBook wasn't in state where I could upgrade to Mavericks.)
thanks
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.
Similar Messages
-
HELP: Can't connect to the internet with new mini
Hi
I've just unpacked the new mini I bought today. I use a LAN that I set up myself. I use a Linksys Router 11Mb/s. All computers atached to it work fine, including an iBook G4 with Airport Extreme.
The Mini does recognize my network via Airport, and the Airport card MAC adress is already in the authorize list, but still does not connect.
Worse, I plug an Etherner Cable to the plug that works with a PC, but still no internet. I set up a manual IP adress instead of DHCP. Still no internet. I reinstalled the entire OS X, from start, still no internet.
Any ideas, anyone ? Thanks !
pd: This is frustrating, I just brought it from the store todayTry turning your router/modem off. Now connect the ethernet cable to the mini and the router and restart the router/modem. If it works, update the system.
When connecting airport, make sure you turn off the router/modem, and then take out the ethernet cable and then restart the router/modem and then power up your mac mini and set up airport.
If the above does not work, RESET the modem/router to its default settings. Once trained, use a ethernet connected Mac to set it up (the Mini perhaps).
I am suggesting this because I had to turn off my router to connect one of my Macs before I could surf the net. i also find resetting the router can sometimes iron out connection issues.
iMac G5 1.6 ; PowerBookG4 1.33 ; MacMini G4 1.25; Mac OS X (10.4.4) -
Software Update can't connect to the internet after a new install of 10.6
I had a clean install of 10.6 and after that the Software Update can't connect to the internet (the status bar hangs at the beginning and finally it prompts me the internet is not connected) while all my other applications can.
Someone help me out?I am having exactly the same problem as well.. has anybody managed to solve this yet? I have uploaded Snow Leopard - try to connect to Software Update - the menu bar scans a little then stops and then an error saying 'Not connected to the internet'' but the connection is working fine!!
Is this a SL issue? or just an overload with the Software Update programme? I cant do anything - no update for itunes/iphone software, etc.. most annoying.
Look forward to seeing some good news and some answers to this one.
Cheers
Linda -
Got a new motherboard after my PC crashed, because my old one was defect. Now my Creative Suite thinks it's a new computer. I can't register my serial number, because it can't connect to the internet, but internet works fine. What do I do? My operating system is windows 7, System is Intel Core i7-4790 / 16 GB RAM
Contact support by web chat to reset activations and refer to this:
Sign in, activation, or connection errors | CC, CS6, CS5.5
Mylenium -
I can not connect to the internet. I called mediacom due to the problem and they connected me to internet explorer. They indicated I should contact you for help in connecting to the internet. It appears firefox has made some kind of change since last night since I was using firefox for my internet connection last night. Something has changed. Your help will be appreciated.
http://en.wikipedia.org/wiki/Keyhole_Markup_Language
The only way that file opens thru IE8 for me ''(but not actually in IE8)'' is by using the Zip Utility (then IE closes) that is in WinXP and then opening the two image files in the Windows Fax and Picture Viewer.
I think Firefox is trying to display that file because the MIME-type is for '''''text/plain''''' instead of the appropriate MIME-type of '''application/vnd.google-earth.kml+xml''' or '''application/vnd.google-earth.kmz'''
That is something that needs to be configured in the server that is hosting that file type. Sorry, I don't know how that can be fixed. The one support person here that might know lives in Europe ''(I believe)'', so you might need to wait for an answer. -
Hi all, trying to set up my MBPro...seems to be connecting to my AirPort Base Station w/out any troubles...but when I try to get online I'm getting a "can't connect to the Internet" message. I checked my network settings, restarted multiple times, etc. No luck. Seems to be a problem with the IP address (I think)...but not sure how to resolve it. I have an iMac and iPhone in the house that are able to connect and get online w/out issues. Any thoughts? TY!!
Are you asking the make/model of the computer or the AX base station?
Neither, I was interested in the make/model of the cable modem.
Our ethernet connection was fried in an electrical storm so we had to go wireless.
Electrical storms are never a good thing when it comes to electronics. What was/is your current network configuration? Is it something like the following?
Cable modem > (Ethernet cable) > AX > (wireless) > wireless devices
Is there another router, other than the AX, in the configuration? ... or an Ethernet switch? I'm just trying to understand your network to best advise you on how to configure the AX. -
After update I can't connect to the internet in no way, shape or form
I rarely update because: 1) something always breaks when you update (like now) and 2) I don't like to deal with new crap like GNOME 3. Anyway:
I bought a new router (TL-WR1043N) and configured it with an old Ubuntu because connecting to 192.168.1.1 didn't work on any of my Arch Linux installations. Now... here's where it all starts... I can't use the 'n' wireless on my laptop since I have to install something to use WPA, and to install that I need to update, but I don't want to deal with GNOME 3 and Firefox >3. But I gave up eventually gave up and connected my laptop to the router by Ethernet cable. Setting that up was very easy: 'ifconfig eth0 up; dhcpcd'. Voila! I updated my whole system and restarted. To see how badly I damaged my system I opened Nautilus (I use Openbox with some GNOME programs): shock and dismay, the fonts are visible from the moon. I guess I'll have to quit using GNOME programs completely now but I expected that. I used to use KDE back in the day and when KDE4 came forth from that unholy pit, I immediately abandoned it for GNOME. This time we had more time to prepare, everybody knew what GNOME 3 was going to be. I started using Openbox quite a long time ago.
Anyway: Now to fix my wireless right? WRONG! I can't connect to the internet on cable to get the packages for wireless. I installed Windows 7 64 on the same laptop and it connects to the cable. Ubuntu 9.10 Live also connects, but due to the changes of rc.conf and network stuff I can't connect at all with Arch Linux.
So I decided to abandon it completely and reinstall from scratch. But the Live CD also doesn't work. With all the ways I've tried it all comes down to this:
dhcpcd always times out waiting for a carrier and 'ip addr' shows 'eth0: <NO-CARRIER, ....' if the interface is up. I'm not sure what information I should give you, but I can't paste any here since I can't connect to the damn internet on that laptop.
About the router: the cable is plugged on port 1 and the LED for it flashes if I reboot the computer. In Windows it stops flashing while it connects and flashes again when connected. I removed 'network' from DAEMONS and it flashes till I start it with '/etc/rc.d/network start'. This hangs for a while and returns '[DONE]' even though it doesn't work and the LED never flashes again on the router.
In rc.conf I have exactly what the example says for DHCP. In any case, it doesn't work with the Live CD either.
EDIT 1: From lscpi: painstakingly typed:
06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
07:00.0 Ethernet controller: Realtek Semiconducctor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
EDIT 2: Just to be clear: I can use the wireless on the laptop on the Live CD, but I want to use the cable because of the greater speed (94Mbit/s on cable 60 something on wireless n, 20 something on g) and because I rarely move the laptop.
EDIT 3: lspci -v shows "Kernel driver in use: r8169 / Kernel modules: r8169", so the driver is loaded.
EDIT 4: So if I boot from the CD. ip addr shows:
eth: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:1d:92:...etc... brd ff:ff:ff:ff:ff:ff
And the LED flashes. When I type: "ifconfig eth0 up" it stops, never to light up again and ip addr shows: "eth: <nO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
Last edited by imtired (2011-09-08 12:36:51)When you're in Arch, use output redirection
lspci >lspci.out
then boot into Ubuntu or something where you can access the files and the BBS, Of course, don't forget to use a new file for each command output.
The new network config in rc.conf is not that complicated (wired anyway; never used wireless). OTOH I've had issues on two machines where I have to restart the network daemon (rc.d restart network) or rerun netcfg (netcfg eth0) after boot to get connectivity. And I still haven't come to grips with the ip command. -
Ok. so i did a search and didn't come across any other problems like the one I'm having.
Let me start off by stating that my laptop is an ibook g4 bought feb, '06 (yes the apple care just ran out).
I'm having a problem connecting to the internet on my ibook, running through a d-link wireless router. I'm using my imac to connect to the internet currently (which works fine by the way). It also is connected through the wireless router.
My ibook has a strange ailment. I open up Safari and all I get is a blank screen, the page is trying to load but the status bar is going no where and does the same in Firefox. So first, I opened Network diagnostics, but the computer freezes and I have to do a hard shutdown. (holding the power button). Next, I tried Disk utility. Verified Permissions, Repaired Permissions, everything is fine. I tried to Verify Disk, and again the computer freezes, will not let me force quit and I am forced to do another hard shutdown. I do the thing where you hold down some key while you're starting up to get into the disk utility so I can repair the disk. This returns clean as well. I downloaded techtool off of my Applecare disk. Did the tests, everything passes. So what's the deal?? I've tried to reset the pram. I even did the Apple Hardware test, everything passed.
I thought it could be my Airport card? It recognizes that there is an internet connection in the top right corner, I even have great signal strength (mostly because I've tried this sitting right next to the router). But still, I can't connect to the internet. Any one have any ideas? I don't know what else to try! Please help!so i can't believe i didn't try to connect it directly to the router with the ethernet cord. This actually worked. But it still didn't solve my wireless problem. I'm not willing to let my laptop become a desktop. I'm already wired to a plug b/c the battery is slowly dying and has a life of about 5 minutes. I'm not willing to give up my wireless internet too.
I guess now it's got to be the airport card? how do I confirm this? and if it is how much would a new one cost and can I install it myself?? -
Can't connect to the internet with airport or firewire
I can't seem to connect to the internet with airport or firewire. I recently restored my old G4 mac mini PPC 1.42 (with airport and bluetooth) Tiger 10.4.8 with a new harddrive. I have it connected to my leopard mac pro, internet sharing is on (both computers), the systems are connected, however, the mini just can't connect to the internet. tried it also using airport, no go. network diagnosis seems to go in a constant loop.
works ok with ethernet connection though.
that'll work. -
I put the BT WiFi app on my iPad Mini and now I can't connect to the internet. Please help
I put the Bt WiFi app on my iPad Mini and now I can't connect to the internet. Please Help
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My wi fi icon has disappeared from my toolbar and I can't connect to the internet
My wi fi icon has disappeared from my toolbar and I can't connect to the internet. How can I fix it?
In System Preferences > on the left panel, click the + sign (bottom right) to add a new Wi-Fi service then set it up.
-
Linksys Wireless Router BEFW11S4 - Shows connected, but I can not connect to the internet
I have a Linksys Router hooked up to a cable RCA modem using Comcast Cable. There are 3 laptops that hook up wirelessly to the router and they have been working fine for the past two years. However, recently all three laptops can not connect to the internet for some reason. I checked with Comcast and they checked out the modem and tested it and it works fine. When I hook my laptop up to the modem with an ethernet cable, it works fine and I can get on the internet. When I hook the modem up to the router and try to connect wirelessly it appears to be fine. It shows that the router is connected there is connectivity on all our laptops, however when I open a new internet explorer page to get on the internet, it does nothing. A blank page appears and the webpage will not load. Does anyone know how to fix this? Is it the router or the way it is setup in the admin page or could it be possibly something else? Thanks.
As it shows connected under wireless ....check the Ip address under wireless network connection .....
If it shows Ip 192.168.1.X ....with gateway 192.168.1.1 ..... try to pnig the gateway address ...
If getting reply try going online ....
Also disable the firewall first..... -
Can't connect to the internet though my iMac thinks everything is fine
I got my iMac connected to a router which is connected to a DSL-modem. I had this up and running for a year until I needed the router for something else and then put it back in place.
Now I can't connect to the internet. I got a green dot for my network settings, I got a plausible IP, the router's IP is filled in correctly. When I run the assistant it tells me that there are no problems connecting to the ethernet.
I tried switching routers, I restarted both the router and the modem (and the iMac of course), I tried entering the IP-adress manually... nothing works.
And by the way; my old b/w G3 works just fine at the same cable. Both computers got the same settings in the network panel, but obviously something does differ, but what?
And by the second way, I had my iMac at the workshop which charged me for checking it since it doesn't have any hardware problem.
HELP!
Thanks in advance! DanielNaa, I really don't know any longer what to do. Now I'm sitting with my old laptop at the same cable after replacing DSL-splitter, DSL-modem, the router including power supplies, I even cut the contacts and fixed new ethernet-plugs. Works fine with this PC, works fine with the G3, and it just won't work with the iMac.
Last chance: I'm gonna try with WLAN, probably there's something wrong with the ethernet adapter even though this repair dude couldn't find anything.
*E D I T*
Japp, airport is working just fine. This means that there's something wrong with my iMac, right? I'm gonna take it to my job on monday and try to connect to the LAN there, then we're gonna see. -
Why (out of the blue) airport extreme can't connect to the internet?
Suddenly the airport extreme on my macbook pro (10.6.8) decided to completely stop working. the modem/router work fine as i tested them with another computer and i've brought my macbook to another house and tested it there and the same thing happens. if i'm hardwired via ethernet cable the internet works like normal. which is what i'm doing now.
the wireless icon on the top of the screen shows full strength and when i click on it it shows my network with a check mark next to it but if i try to open a browser window it won't work. opening network preferences shows that airport is not connected and it does not have an IP address and can't connect to the internet. if i open airport utility (5.6.1) it says "airport utility unable to find any airport wireless devices".
everything was working fine a few days ago.
what's going on?The same thing happened to me, and I took it to get looked at and they even replaced my base station, but then it kept disconnecting. I finally found the answer that solved my problem, but now I can't find the post that solved it to direct you toward. So I'll try to re-create it as best as I can.
Like that user, I have Xfinity. The other user had received this assistance from Comcast tech support (Which is sad that Comcast was more helpful than ... anyone ... but especially Apple), so if it doesn't work they should be able to help fill the gaps. Chances are, you may be better off getting assistance from your ISP than from Apple.
Basically, Comcast switched over to IPv6, and it needs to be accounted for or else the AEBS will drop the signal from the DSL modem.
1. Open Airport Utility
2. Click Edit on your AEBS icon.
3. Click the Internet tab.
4. Click Internet Options.
5. Make sure IPv6 Mode is set to "Tunnel."
6. Click the "Enable IPv6 Connection Sharing" radio button so that it's active.
7. Save changes, Update the new settings, and let the AEBS restart with the new changes.
I fixed it a couple of days ago, and it's worked perfectly since then.
Here's the post that fixed it. https://discussions.apple.com/message/21916742#21916742
Here's the Comcast information the post refers to. http://www.comcast6.net/index.php/6to4config#faq3
Message was edited by: Crimsondude -
Safari 5.1.1 can't connect to the internet. Every other browser can.
I've tried resetting Safari, reinstalling Safari, and resetting my router to factory settings. Safari still can't connect to the internet, but everything else on my Mac (Snow Leopard 10.6.8) can.
I recently tried setting up Open DNS just because I've had problems with Comcast lately. But I've since returned DNS to be detected automatically.
Thoughts?kextstat -kl | awk ' !/apple/ { print $6 $7 } ':
at.obdev.nke.LittleSnitch(2.2.05)
com.rogueamoeba.HermesAudio(3.0.2)
com.Cycling74.driver.Soundflower(1.5.1)
com.parallels.kext.prl_hypervisor(4.0
com.rogueamoeba.hermes(3.0.2)
com.parallels.kext.prl_hid_hook(4.0
com.parallels.kext.prl_usb_connect(4.0
com.parallels.kext.prl_netbridge(4.0
com.parallels.kext.prl_vnic(4.0
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
com.parallels.vm.prl_naptd
com.wibu.CodeMeter.Server
com.rogueamoeba.hermes
com.parallels.desktop.launchdaemon
com.orbicule.uc
com.mysql.mysqld
com.adobe.SwitchBoard
at.obdev.littlesnitchd
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
net.culater.SIMBL.Agent
com.parallels.desktop.client.launch
com.adobe.CS5ServiceManager
at.obdev.LittleSnitchUIAgent
at.obdev.LittleSnitchNetworkMonitor
com.google.keystone.user.agent
com.google.GoogleContactSyncAgent
com.adobe.AAM.Scheduler-1.0
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AECore.framework
Adobe AIR.framework
Compressor.framework
DSPPublishing.framework
Frameworks
FxPlug.framework
L6TWXY.framework
MacFUSE.framework
MediaServerAPI.framework
NyxAudioAnalysis.framework
PluginManager.framework
ProMetadataSupport.framework
Qmaster.framework
TSLicense.framework
WibuCmMacX.framework
WibuCmWebMacX.framework
XSKey.framework
iLifeFaceRecognition.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Flip4Mac WMV Plugin.webplugin
JavaPlugin2_NPAPI.plugin
JavaPluginCocoa.bundle
NP-PPC-Dir-Shockwave
Quartz Composer.webplugin
QuickTime Plugin.plugin
Silverlight.plugin
flashplayer.xpt
nsIQTScriptablePlugin.xpt
/Library/LaunchAgents:
at.obdev.LittleSnitchNetworkMonitor.plist
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.adobe.CS5ServiceManager.plist
com.parallels.desktop.launch.plist
net.culater.SIMBL.Agent.plist
org.thebends.iphonedisk.mobile_fs_util.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.SwitchBoard.plist
com.apple.aelwriter.plist
com.apple.qmaster.qmasterd.plist
com.apple.third_party_32b_kext_logger.plist
com.mysql.mysqld.plist
com.orbicule.uc.plist
com.parallels.desktop.launchdaemon.plist
com.rogueamoeba.hermes.plist
/Library/PreferencePanes:
Apple Qmaster.prefPane
Flip4Mac WMV.prefPane
Growl.prefPane
MacFUSE.prefPane
/Library/PrivilegedHelperTools:
/Library/QuickLook:
ParallelsQL.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
.DS_Store
AppleAVCIntraCodec.component
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
AppleProResCodec.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
DesktopVideoOut.component
FCP Uncompressed 422.component
FLV.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
IMXCodec.component
LiveType.component
XVIDDelegate.component
iChatTheaterPreview.component
macam.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
SIMBL.osax
/Library/StartupItems:
ParallelsDesktopTransporter
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.google.GoogleContactSyncAgent.plist
com.google.keystone.agent.plist
Library/PreferencePanes:
Hazel.prefPane
Library/QuickLook:
AnimatedGIF_QL.README.rtf
AnimatedGIF_QL.qlgenerator
Maybe you are looking for
-
Payment advice sent by e-mail, payment media file to be created before
dear all We have implemented e-mail as a way of sending out the payment advices automatically to suppliers. Currently we execute the payment run, generate the payment media (which at the same time creates the payment advices and sends them out by e-m
-
Hi Guys , I am trying to set up Mirroring on my local machine to test SQL2008R2. And when Ever I am trying to start getting this error.. IS anyone has idea? On Mirror Server Error log has this details : Database Mirroring login attempt by user.' fai
-
Attaching pdf files they do not open in adobe reader?
I just downloaded Mozilla as browser due to the many issues with IE. Now when attaching PDF files or trying to read PDF files they show up as a Mozilla icon or do not open with Adobe Acrobat.
-
I bought a new computer yesterday. The strore extracted my itunes to my new computer. I can purchase songs but can not send to my mp3 player as I have always done. Please help if you can. thanks much
-
HT3847 how many iTunes libraries can I open at one time
I want to work on diffrent itunes libraries at the same time is it possible or do i need to a/b