Can't connect to the window application server.

I have installed the Sun Secure Global Desktop Software 4.2,
the client can connect to the unix application server but can't connect to the window applicaiont server.
What can i do?
Thank you.

Hi.
Are you sure you're using a Windows server which support Terminal Services? In other words, try (on the Windows server) by escaping to the CMD prompt and issue the
netstat -n
command as to see if port 3389 is listed in LISTEN state.
Best,
Rob

Similar Messages

The ITS could not connect to the Web Application Server or the R/3 System

Hi Gurus
we are in the process of insalling ITS 6.20 (ITS version is 620010318381 ( itsWindowsX64_31-200001681, R/3 4.7 200)
Actually we installed it for dev/qas server with connectin mode property as "Connect to SAP system Using Applicatin Server" these are working fine for webgui!
and the same thing i installed for Production as connection mode property as " Connect to SAP System Using message Server" (hostname/IP, port as 3600 (as instance number is 00) here in the production evnironment we have 2 app servers. The installation got successful but i am not getting the log on screen through the link: http://10.3.3.175:81/scripts/wgate/webgui!
the error message is :
Connect Error
The ITS could not connect to the Web Application Server or the R/3 System
any help please
Thanks in advance

Hello Balaji,
Check the global.srvc file for errors in the R/3 system information. The ITS uses the following to connect to your system:
~appserver
~routestring
~systemname
~systemnumber
~logingroup
~messageserver
Which parameters are used depend on how you are connecting (logon group, route string, etc.)
Edgar

ITS could not connect to the Web Application Server or the R/3 System

ITS 6.20 on a single host on a WinXP test machine, connecting to R3 4.6C.
The webgui <u>was</u> working, but a test application created in the WebStudio would not work.
Now it's the other way around, the test application works fine, but the webgui fails with a "The ITS could not connect to the Web Application Server or the R/3 System."
I have not managed to get ../scripts/wgate/admin/! to work either.
Is it possible to have both the webgui and WebStudio created applications, working on the same ITS installation?
If yes, any ideas how?
Many thanks
Tim

Hi Tim,
You have to check the connection data in the relevant service file e.g.
~systemname
~messageserver
~logingroup
~appserver
~systemnumber
~routestring
~connectstring
If the Agate doesn't run you would see an ITS 500 error in the browser.
Thanks and regards,
Dieter

Can't connect to the modem's server.

Hi guys, I have a major problem.
When ever I connect to the internet with my modem, it works. But, when I connect to internet with my router and modem, I can't connect. But I have solved my problem by resetting both, my wireless router and modem. Then after I reconfigure my wireless router all I need to do is to log into my modem's server. But I can't connect to the modem's server. I tired logging in with "admin" (being the password) but I still can't connect to it.
I am using: Verizon Broadband Network
                 Ultra RangePlus Wireless-N Broadband Router model: WRT160N
                 Westell modem model 6100
What is the problem? Has anyone experienced this problem before?
Message Edited by machg on 04-11-2009 07:10 PM
Solved!
Go to Solution.

You will not be able to log into the modem as long as the router is plugged in
You must configure the modem first to bridge mode,then plug in the router and log into it
   1.)unplug router and have only the modem in
       go to 192.168.1.1 enter
      that will take you into the verizon modem/ if you have reset the modem then your user is; admin
                                                                                                                     your password is ; password
     once you lopg into that it will ask you to change the username/password
      just type in ADMIN in all 3 blanks
now you are logged into the modem;;;;;;go to network at the top,then network connections on the left,broadband connection ,you will then put your protocol on bridge/routed bridge,
now go to wireless settings at the top and make sure wireless is turned on
you have the option to set up a security key on basic security settings
once your modem resets then plug in your router,you are now in bridge mode and the modems connection has moved to your router. you must restart modem and computer for everything to take effect....
also make sure and refresh your network list on your laptop
Hope this works

Can apex work without the oracle applications server? How?

My question is just what the title says.
Can apex work without the Oracle applications server?
I've heard it needs a web server to work but not necessarly the oracle applications server.
Is it true?
With ONLY apache installed can apex work on top of it?
Thanks
Don't forget to assign points to those who help you! (Mark the thread Helpful/Correct)
My Homepage
Best Regards
Edited by: Igor Carrasco on May 29, 2009 2:59 PM
Edited by: Igor Carrasco on May 29, 2009 2:59 PM

Hello,
Take a look at the Installation Guide which covers all the different options you have (as there are a few variations) -
http://download.oracle.com/docs/cd/E14373_01/install.32/e13366/toc.htm
but yes, in short you can have a configuration where there is no external webserver which uses the embedded PL/SQL gateway.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Can't connect to the Software Update server (lionserver.t3m.private)? Please help!

Has anyone experienced this; Can't connect to the Software Update server (lionserver.t3m.private)?
I can no longer sync my iPhone as it needs an iTunes update. When I select update software and I get the error message above.

If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
Change DNS Servers
Settings -> Wi-Fi
Click the blue arrow on your connected network
Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
Try again
If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
If you are getting the error message "Unable to check for update" when you try through iTunes
On your Mac
Choose Apple menu > System Preferences, and then click Network.
Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
208.67.222.222
208.67.220.220
You can Google Public DNS if you want
8.8.8.8
8.8.4.4

Safari can't connect to the web proxy server (HTTP)

Hello,
I have following problem. I need to connect to the internet using a proxy server. I went to System Preferences/Network/Wi-Fi/Advanced.../Proxies. Then, I selected Web Proxy (HTTP) and enetered server's IP address and port. It looks like I did everything correctly, but Safary can't open any page because "Safari can't connect to the web proxy server (HTTP)". Does anyone know how to solve this problem?

There are three possibilities:
1. You entered the wrong address and port number for the proxy.
2. You entered the wrong user name and password, if applicable.
3. The proxy doesn't work or is incompatible.

I can't connected to the apple tv server

I can't connected to the apple tv server?????

Hello Dinaabiy,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple TV issues:
Apple TV: How to restart your Apple TV
http://support.apple.com/kb/ht3180
If you can't restart your Apple TV because it's unresponsive, try the following:
Hold down Menu and Down on the Apple Remote for six seconds, and then release when you see the indicator light on the Apple TV blink rapidly.
Unplug the Apple TV power cord for three seconds, and then plug it back in.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Can't connect to the software update server, can't connect to the software update server

please advise, I like to update my iphone 4 and ipad 2 to 5.1 but I cant connect to the software update server. I've been trying to connect since yesterday. Is anybody have an idea why?

If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
Change DNS Servers
Settings -> Wi-Fi
Click the blue arrow on your connected network
Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
Try again
If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
If you are getting the error message "Unable to check for update" when you try through iTunes
On your Mac
Choose Apple menu > System Preferences, and then click Network.
Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
208.67.222.222
208.67.220.220
You can Google Public DNS if you want
8.8.8.8
8.8.4.4

Can't connect to the BlackBerry World server

It says "BlackBerry World is having trouble connecting to the BlackBerry World server. Verify your network connections and try again."
I have recently updated my BlackBerry Playbook. It's.been like this for weeks now.
Any help would be appreciated.
Thanks.

The Playbook can only do updates with WiFi, or if it is a 4G it will do the updates over the mobile network.
If the Playbook does not update, try a re-start. Also check if your router is allowing WiFi access to the net.
If you did an operating system update, you may have to go the Identification and re-enter the Playbook's ID and password to allow access for updates and backups to work. The ID is in the main system menu listing.
Jerry G.

Outlook 2013 client, not in domain, can't connect to the Exchange 2010 server

Good Aftermoon,
Having issues it seems getting to the right forum but here is what I have. Currently we are running an Exchange 2010 server. OWA is configured and I am not having any issues with people connecting through it. The issue I am having is that any user that tries
to connect through Outlook 2013 gets an error message about the proxy server and then a certificate error. I have run the tests through the toolbox and get the following results.
Attempting to test potential Autodiscover URL https://autodiscover.westmoreland-county.org:443/Autodiscover/Autodiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Elapsed Time: 694 ms.
Test Steps
Attempting to resolve the host name autodiscover.westmoreland-county.org in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: 69.89.25.150
Elapsed Time: 284 ms.
Testing TCP port 443 on host autodiscover.westmoreland-county.org to ensure it's listening and open.
The port was opened successfully.
Additional Details
Elapsed Time: 164 ms.
Testing the SSL certificate to make sure it's valid.
The SSL certificate failed one or more certificate validation checks.
Additional Details
Elapsed Time: 245 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover.westmoreland-county.org on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Remote Certificate Subject: CN=*.bluehost.com, OU=PositiveSSL Wildcard, OU=Domain Control Validated, Issuer: CN=PositiveSSL CA 2, O=COMODO CA Limited, L=Salford, S=Greater Manchester, C=GB.
Elapsed Time: 201 ms.
Validating the certificate name.
Certificate name validation failed.
<label for="testSelectWizard_ctl12_ctl06_ctl00_ctl00_ctl01_ctl02_ctl01_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
Host name autodiscover.westmoreland-county.org doesn't match any name found on the server certificate CN=*.bluehost.com, OU=PositiveSSL Wildcard, OU=Domain Control Validated.
Elapsed Time: 1 ms.
Attempting to contact the Autodiscover service using the HTTP redirect method.
The attempt to contact Autodiscover using the HTTP Redirect method failed.
Additional Details
Elapsed Time: 234 ms.
Test Steps
Attempting to resolve the host name autodiscover.westmoreland-county.org in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: 69.89.25.150
Elapsed Time: 14 ms.
Testing TCP port 80 on host autodiscover.westmoreland-county.org to ensure it's listening and open.
The port was opened successfully.
Additional Details
Elapsed Time: 83 ms.
The Microsoft Connectivity Analyzer is checking the host autodiscover.westmoreland-county.org for an HTTP redirect to the Autodiscover service.
The Microsoft Connectivity Analyzer failed to get an HTTP redirect response for Autodiscover.
Additional Details
The URL specified in the location HTTP header was not HTTPS. URL: http://autodiscover.bluehost.com/Autodiscover/Autodiscover.xml
HTTP Response Headers:
Keep-Alive: timeout=10, max=500
Connection: Keep-Alive
Content-Length: 356
Content-Type: text/html; charset=iso-8859-1
Date: Wed, 03 Dec 2014 18:10:08 GMT
Location: http://autodiscover.bluehost.com/Autodiscover/Autodiscover.xml
Server: Apache
Elapsed Time: 135 ms.
Our setup currently our domain is being hosted and the web master has control of domain settings.
I am fairly new to the Excchange Server world so any suggestions that you may have as to how I can resolve this would be great.
Bill

Hi Bill
Thank you for your pos.
You can use the following command to check whether you have purchased the certificate of audiscovery.westmoreload-country.org in your organization:
Get-ExchangeCertificate –server CASServerName | fl
For example: you want to return all certificates stored on the Client Access server named ClientAccess01, you will type the follow command in EMS.
Get-ExchangeCertificate -Server ClientAccess01 | fl
If you didn’t purchased the certificate of audiscovery.westmoreload-country.org, you could contact your certificate supplier.
You could refer to the following link:
https://support.microsoft.com/kb/940726?wa=wsignin1.0
If there are any questions regarding this issue, please be free to let me know.
Best regard,
Jim

How can i change the class in the Class Library project to be static or public so i can use it from the windows application project ?

First i know that when i make any changes to the class library project i need to rebuild the project then to remove the Capture.dll from the TestScreenshot project and then to add again the updated Capture.dll
The problem for example in this case i'm trying to use a public static variable i add in the DXHookD3D9.
In the DXHookD3D9 i added this public static variable:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
//using SlimDX.Direct3D9;
using EasyHook;
using System.Runtime.InteropServices;
using System.IO;
using System.Threading;
using System.Drawing;
using Capture.Interface;
using SharpDX.Direct3D9;
namespace Capture.Hook
internal class DXHookD3D9: BaseDXHook
public DXHookD3D9(CaptureInterface ssInterface)
: base(ssInterface)
LocalHook Direct3DDevice_EndSceneHook = null;
LocalHook Direct3DDevice_ResetHook = null;
LocalHook Direct3DDevice_PresentHook = null;
LocalHook Direct3DDeviceEx_PresentExHook = null;
object _lockRenderTarget = new object();
Surface _renderTarget;
public static decimal framesperhourtodisplay = 0;
protected override string HookName
get
return "DXHookD3D9";
List<IntPtr> id3dDeviceFunctionAddresses = new List<IntPtr>(
framesperhourtodisplay
The problem is i can't even get to the Capture.Hook namespace and not to the DXHookD3D9 from the TestScreenshot application window project.
This is a screenshot:
For example fro the FramesPerSecond class i can use it get to it from the windows forms application.
namespace Capture.Hook
/// <summary>
/// Used to determine the FPS
/// </summary>
public class FramesPerSecond
int _frames = 0;
int _lastTickCount = 0;
float _lastFrameRate = 0;
Since it's public i guess.
But if i will change the DXHookD3D9 class from internal to public:
public class DXHookD3D9: BaseDXHook
I will get error on the DXHookD3D9:
Error 1
Inconsistent accessibility: base class 'Capture.Hook.BaseDXHook' is less accessible than class 'Capture.Hook.DXHookD3D9'
And the BaseDXHook class:
namespace Capture.Hook
internal abstract class BaseDXHook: IDXHook
protected readonly ClientCaptureInterfaceEventProxy InterfaceEventProxy = new ClientCaptureInterfaceEventProxy();
public BaseDXHook(CaptureInterface ssInterface)
this.Interface = ssInterface;
this.Timer = new Stopwatch();
this.Timer.Start();
this.FPS = new FramesPerSecond();
Interface.ScreenshotRequested += InterfaceEventProxy.ScreenshotRequestedProxyHandler;
Interface.DisplayText += InterfaceEventProxy.DisplayTextProxyHandler;
InterfaceEventProxy.ScreenshotRequested += new ScreenshotRequestedEvent(InterfaceEventProxy_ScreenshotRequested);
InterfaceEventProxy.DisplayText += new DisplayTextEvent(InterfaceEventProxy_DisplayText);
~BaseDXHook()
Dispose(false);
How can i solve it so i can use the variable framesperhourtodisplay in the DXHookD3D9 class with the TestScreenshot windows forms application ?

Hi,
I dont know if it will work here, since I dont know the complete structure, but the base call must be public, if the derived class is public, so the base class is at least as accessible as the derived class.
Try make the base class public. (And maybe the base-class IDXHook of the base also...)
Or use a different approach and make only the properties public that are needed to be public by adding an extra class...
A structure could look like:(you need to create a class thats public in your dll and expose a property, and set this property in the internal class...)
In the Accessing class (here Form1)
public partial class Form1 : Form
public Form1()
InitializeComponent();
private void Form1_Load(object sender, EventArgs e)
C c = new C();
MessageBox.Show(B.F.ToString());
and in the class Lib:
internal class A
public A()
B.F = DateTime.Now.Millisecond;
public class B
public static int F { get; set; }
public class C
public C()
A a = new A();
(add a referenc to the class lib from the accessing project)
Regards,
Thorsten

DNS: Client can't connect because .local domain isn't in DNS. How can I connect over the WAN to server.domain.local?

So my 2012 server is set up on the LAN with a .local domain name.
Remote Desktop Services are set up and remoteapp stuff works fine on the LAN.
I've set up port forwarding so I can connect to the server over the WAN too, but remoteapp stuff is a bit different. I can connect to the server by specifying the correct IP address. Giving a Web browser the address
https://serverIPAddress/RDWeb
lets me get the login screen and see the range of apps for me to run. I select one, the connectoid is downloaded correctly (in Chrome) and I click on the downloaded connectoid.
Unfortunately, rather than pursuing the sensible IP-address approach that I started with, the connectoid has been given the server's name on the LAN: server.domain.local. Clearly, the client machine tries to look this up but DNS hasn't heard of
it because it's a .local address.
I cannot be the only one to have come across this apparent oversight on Microsoft's part. Any ideas as to how this can sensibly be overcome? Obviously, I could put the IP address translation into every client's hosts file (and I've done this and shown it
works) but I've got too many clients to mess about like this. Anybody know 'the Microsoft way' to fix this?
Thank you for checking this out -- I am confident the details of the problem are completely specified in this query but, if I'm wrong, please ask.
Many thanks again,
Biffo

Hi,
I would like to suggest you to follow the checklist.
Checklist: Make RemoteApp Programs Available from the Internet
http://technet.microsoft.com/en-us/library/cc772415.aspx
Thanks.
Jeremy Wu
TechNet Community Support

I can't use facetime on my ipod touch....it says can't connect to the face time server. Anyone else have this problem?

I can't get facetime to load on my ipod touch. It says unable to connect to facetime server. Anyone else have this issue? Any suggestions??

i bought my daughter an ipod touch and i can not connect facetime from my iphone 4. i get a picture on both but the one that's calling continues to ring and says connecting. is this a firewall issue?

Outlook 2013 client, not in domain, can't connect to the Exchange 2013 server.

Hello everyone,
A colleague and me are in the process of rebuilding our Hosted Exchange servers. Everything is working perfectly except for the local Outlook 2013 clients. They are not in the domain but in the same network (through VLANs) as our Exchange server, and still
they can't connect to Exchange without the use of Outlook anywhere. If we use Outlook Anywhere, it connects perfectly. If I ping the Exchange servers (1 CAS, 2 MBX servers) I get response with the right IP addresses.
We've tried to create a new profile, this goes without problems. We enter the FQDN (or IP address) of CAS server and the required usersname, and the FQDN gets resolved to the correct MBX server where the mailbox resides on. We complete the whole wizard and
then start Outlook. We then get the error that Outlook can't logon to the Exchange server.
Is this an authentication setting that is wrong or do we need to use Outlook Anywhere if the PC is not in the same domain as the Exchange server?
Thanks in advance!

Hi,
Agree with Martina, all Outlook clients use RPC over HTTP to connect to Exchange 2013. if the server version is Exchange 2013 SP1, only Outlook 2013 SP1 use MAPI over HTTP to connect to server after we enable the protocol MAPI over HTTP.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Can't connect to the window application server.

Similar Messages

Maybe you are looking for