Can't connect to Time Capsule. Error: Could not connect to the disk. Make sure NetBIOS is enabled and try again (53).
I have a Time Capsule that I've been using for a while now. I've got a Windows 8 PC and a few MacBooks that I use with it.
Recently, I had to hard-reset my Windows 8 PC (with the reset button while everything was locked up). When it came back, I couldn't connect to my Time Capsule anymore. I get the error message: "Could not connect to the disk. Make sure NetBIOS is enabled and try again (53)."
I've tried:
Checking on the NetBIOS service to ensure that it's running
Explicitly enabling NetBIOS on the Internet connection
Renaming my Time Capusle to have no spaces or disallowed characters
Pinging both the Time Capsule's name and IP address (both respond)
Any suggestions?
Do you have bonjour installed? If not I recommend you install the full apple airport utilities for windows.. although only win7 is available.. it does install in win8. Apple btw need to do some work on making windows access current.
In windows explorer, simply type the address to the TC in the address bar.
\\TCname or \\TCipaddress
If it fails.. turn off firewall and ensure the PC is located at home..as opposed to work or public. A windows PC can go stupid and think it is suddenly in a new environment for no apparent reason. Your reset might do exactly such a thing.
If you still have issues.. are you getting full internet access ok?
Can you open the airport utility in windows and find the TC? If so go to the file sharing page and turn on the guest account to read and write access. This helps loads.. and make sure the workgroup is set to WORKGROUP.
Similar Messages
-
I have received this error message when trying to send a comment to a blog : ERROR: Could not read CAPTCHA cookie. Make sure you have cookies enabled and not blocking in your web browser settings. Or another plugin is conflicting. See plugin FAQ., can any...
Only found one question similar and NO ANSWER to it.Same problem here...nothing in my settings have changed since the upgrade and I've checked my cookie settings and they allow 3rd party cookies. What's up Mozilla? I've been faithful to you for years and you let me down now?
-
PS3 ERROR - Could not print because the disk is not available...
This error message is appearing when printing to Colorburst RIP from PS3.
It started all of a sudden.
I can print to the Epson standard driver with no problem.
I can drag a file into the Colorburst RIP and it prints fine.
It's an issue from PS3 it seems.
Any idea what is up here?
S.O.S.
Apple OS 10.5.2, Mac Pro Dual Quad 3.0 (new), 10gb ramYou're welcome. Glad you're up and running.
Anytime something starts acting weird "all of a sudden", trashing preferences is the first thing to try. -
I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.
Restart it.. Does this all the time with Lion and even worse ML.
Restart the whole network if that doesn't work.. do it in correct order.. from off.. modem.. TC.. clients 2min gap. -
Tns error could not connect to database but can tnsping and sqlplus
The new install OBIEE 10.1.3.4.1, with two Linux RH/64 Bit servers set up and running, but can't get to 11g database when running reports.
Error: nqsError 17001 Oracle Error Code 12154, message ORA-12154: TNS could not resolve the connect identifier specified at OCI call OCIServerAttach. nQSError 17014 could not connect to Oracle database
Server 1 BI Server
BI server is running.
oc4j is running.
jdk is installed
/setup/user.sh variables and libs set
.bash_profile variables and libs set
oracle client installed with lib32
can tnsping the database from here using SID
can sqplus login to the database from here
changed connection pool offiline and uploaded new .rpd
this script does not work /setup . sa-cli.sh to test client, nothing happens, also unable to connect to BI Server in online mode from Windows client 32bit.
Server 2 Presentation Server
saw server is running
set odbc AnalyticsWeb DSN to point to BI Server 1
Since I can ping and connect with tns, why is presentation server throwing errors?
Thanks for the helpCopy the tnsname.ora file from Oracle Database serve onto the client PC.
Path: %Oracle_home%\net80\admin\
Send me a mail if there is any other issues
Regards
Oluseyi Funmi Oduberu
Oracle Consultant
Email:[email protected]
Hi,
I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
Thanks, Mary -
I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???
first off , from the wired computer access the router using http://192.168.1.1 .. check the firmware version .. go to www.linksys.com/download and check the latest firmware available...if the router does not have the latest firmware , upgrade it first. .. after the firmware upgrade , reset and reconfigure the router
if the router has the latest firmware , then reset the router for 30 seconds .. do a power cycle...access the router ui ..default password is admin..click on the "mac add clone" subtab , enable it and click clone....save the settings and do a power cycle..ensure that the wired computer is online
on the router web ui , click on the wireless tab ..change the ssid - any non-linksys name , channel - 11 , security mode - wpa , beacon interval - 50 , fragmentation threshold - 2306 , RTS threshold - 2307 ..
let me know if this helps you.. -
I turn off my whats app lasseen time stamp more than 24 hours ago and now i can't turn it on it sees " could not connect to whats app services please try again latter" i try deleting the app and changing the calendar and still didnt worrk
Ok - an update ...
Managed to get the phone to backup to iCloud, so decided to risk the "Factory" reset.
Took the reset option including delete all data and crossed fingers.
It took a while to resotre from iCloud, but everthing seems to be back and ...
Bluetooth now working agaim.
Backup to Computer working again.
And somewhat to my surprise, GMail in the mail app is working again. (The surprise being that the implication of other posts was that this was a 6.1.3 fundamental bug)
Still no idea why the iPhone was corrupted - but at least the "Factory" reset seems to have recovered the situation. -
PHP Soap error Could Not connect to host
Hi all, this is my first time on this forum so I hope I am not doing anything stupid.
I have a wsdl file in my local server, when I try to access the code I get error could not connect to the host each time. I thought this was my programming mistake until I tested it on my ubuntu and windows server, It seems to be working fine on them. Is there something that I should enable some module or port ( I already have my soap extension loaded in php). Please help me out with this.
Last edited by rohankoid (2012-04-16 05:05:22)Hi,
Welcome to the Discussions
At one time Google(Talk) only offered the service to Google Mail accounts with either @gmail.com or @googlemail.com endings.
Nowadays they also offer Google IDs that can then be made to work as GoogleTalk IDs.
These are the iChat 3 instructions http://www.google.com/support/talk/bin/answer.py?answer=24076 with pics.
In iChat 3 there was no GoogleTalk option and was added as Jabber ID and then you had to change the Server name (it presumed that it was either gmail.com as Defcom shows or googlemail.com) by taking the end of your Google Mail ID and puling it though to the Server Name box.
In iChat 4 and 5 there is a Google ID option and this will set the Server as talk.google.com as you list.
Google allows Port 443 to be used and the gmail.com as server name
My Current Settings
NOTES.
Based on the Google Instructions your Name in iChat must match the ID you see when you login in to the Google Mail page (Or web site).
The Mail App seems to cope with either and grab your mail for download but iChat prefers that you use the one as Listed.
Also on your Google Account have you enabled TALK ?
You need to do this first.
8:24 PM Tuesday; March 16, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Error "could not connect....0xE8000001 UGH!
Hey gang. Please help.
Advanced user here, been reading posts and all Mac Docs for a week straight now. Here is my specific issue
I can reinstall iTunes and connect to iPod touch just fine. I can unplug ipod a few times, reconnect and iTunes still recognizes it.
As soon as I eject for the 3rd or 4th time OR restart iTunes, I get the message that it could not connect because of an unkown error 0xE8000001.
Then I have to reinstall itunes again. it works for 3 or 4 cycles, then bam, same error comes back.
So I can fix the error and connect, but how can I get rid of it for good? I have done every suggestion and proceedure from Apple written on this site:
1. reinstall itunes
2. restart apple device service
3. clean up install files
4. repair registry
5. delete temp files folder
6. tried every mother board USB 2.0 ports
7. disabled all "start up services" with msconfig
8. Restored ipod twice
9. plus all other printed help here discussed over the past 4 months.
Nothing works ALL the time. I can just get it to resync 3 times then it comes back????
Thanks!
ZCopy the tnsname.ora file from Oracle Database serve onto the client PC.
Path: %Oracle_home%\net80\admin\
Send me a mail if there is any other issues
Regards
Oluseyi Funmi Oduberu
Oracle Consultant
Email:[email protected]
Hi,
I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
Thanks, Mary -
EAS server error: Could not connect to administration Server
Hi,
I have installed Hyperion suite in Windows server 2008 R2. It was working fine but now when i tried to login in to the EAS console, I am getting the following error:
"Server Error: Could not connect to administration server".
I tried accessing the same through the web URL and I found "404 error - file or directory not found".
I verified all my services are up and running fine. I am able to connect to the essbase sever through Excel as well as planning.
The log retireved from the HyS9eas-sysout.log file is below:
<Sep 11, 2013 7:06:56 AM JST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 11, 2013 7:06:57 AM JST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 11, 2013 7:06:58 AM JST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Sep 11, 2013 7:07:04 AM JST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Sep 11, 2013 7:07:15 AM JST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<Sep 11, 2013 7:07:15 AM JST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Sep 11, 2013 7:07:15 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Sep 11, 2013 7:07:15 AM JST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log00410. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log is opened. All server side log events will be written to this file.>
<Sep 11, 2013 7:07:48 AM JST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Sep 11, 2013 7:07:56 AM JST> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EssbaseAdminServices0 has been migrated to backup server and the backup server is accessing the TLOG of EssbaseAdminServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\registry_update.xml file
EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
Template for EAS#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar
Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM Calcmgr, Oracle EPM Planning libraries, Oracle EPM EAS libraries, Oracle EPM Misc libraries, Oracle EPM Xerces libraries]
BPMUI shared webapp not referenced from EAS#11.1.2.0
Application name: EAS#11.1.2.0
Application source: eas.ear
Server name: EssbaseAdminServices0
Server port: 10080
Server SSL port: 10083
Application context: eas
Registry product type: ESSBASE_PRODUCT
Registry physical web application type: ADMIN_SERVICES_WEB_APP
weblogic.Name property is 'EssbaseAdminServices0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for EAS#11.1.2.0
EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
<Sep 11, 2013 7:09:06 AM JST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'EAS [Version=11.1.2.0]' due to error java.lang.NullPointerException.
java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
>
<Sep 11, 2013 7:09:06 AM JST> <Emergency> <Deployer> <BEA-149259> <Server 'EssbaseAdminServices0' in cluster 'EssbaseAdminServices' is being brought up in administration state due to failed deployments.>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
<Sep 11, 2013 7:09:22 AM JST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<Sep 11, 2013 7:09:48 AM JST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Fri Mar 22 05:12:27 JST 2002,
To: Wed Mar 23 05:12:27 JST 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 10.14.126.11:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.14.126.11:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 10.14.34.75:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.14.218.238:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.14.218.238:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 10.14.34.75:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices0" for domain "EPMSystem" running in Production Mode>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <Server> <BEA-002611> <Hostname "SJ015040", maps to multiple IP addresses: 10.14.126.11, 10.14.34.75, 10.14.218.238, 0:0:0:0:0:0:0:1>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
HyS9eas-syserr.log is empty and I dont find anyother details from the other log files.
Kindly help me out in solving this issue.
Thanks in advance.
Regards,
Balaji PHi John,
Sorry for replying late.
I ran the EPM diagnostic and found EAS & APS application are failed. So as you mentioned, i tried re-deployment through EPM configurator.
But Re-configuration fails with error "An unexpected error occurred and the application will have to shut down" .
When i looked in to the Config tool.log,I got the following messages.
[2013-09-17T18:17:04.635+09:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Parsing server FinancialReporting0 on port 8200 from registry
[2013-09-17T18:17:04.827+09:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Unexpected error:[[
java.lang.NullPointerException
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.<init>(UIPortUtil.java:83)
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.getInstance(UIPortUtil.java:53)
at com.hyperion.config.wizard.DeploymentField.getAppServerDeploymentData(DeploymentField.java:235)
at com.hyperion.config.wizard.DeploymentField.<init>(DeploymentField.java:56)
at com.hyperion.config.wizard.impl.DeploymentForm.<init>(DeploymentForm.java:57)
at com.hyperion.config.wizard.impl.DeploymentState.initializeBeforeShowOnNext(DeploymentState.java:56)
at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:522)
at java.lang.Thread.run(Thread.java:619)
Since it is similare to the Oracle konwledge base article - (Doc ID 1570293.1), I tried adding the shared service domain to the Windows host file. But i am still recieveing the same error message as above.
Appreciates your help.
Thanks & Regards,
Balaji P -
Calc Manager Error "Could Not Connect To Dimension Server"
Could not connect to Dimension Server.
Please make sure that the required services are started.
https://ServerName:19443/HyperionPlanning/servlet/HspAppManagerServlet:
Connection refused: connect.
Hyperion Planning - 11.1.2.3
can anyone help me.
Thanks,Hi ,
Please look at the support document from Oracle.
Calculation Manager Error "Could Not Connect To Dimension Server" (Doc ID 1634959.1)
Thanks,
~KKT~ -
Network error could not connect to server 127.0.0.1:5900
I have created a virtual machine in VM manager from a template and when I try to view the console I get the error "network error could not connect to server 127.0.0.1:5900"
The way that I have everything set up is this.... I am using Oracle VirtualBox installed on Windows 7 and I have created a virtual machine in VirtualBox with Oracle Virtual Server installed and I have Oracle VM Manager installed on that same virtual machine. After reading some forums I found out that I needed to install TightVNC to be able to use the console from Windows IE. So, I have installed TightVNC on my OVS but I can not even tell if it is running. I have also made sure that in iptables that port 5900 is open. I have confirmed this by using nmap to scan my ports and port 5900 is open for vnc when my virtual machine in vm manager is running. I just can not figure out why I am getting the network error unless TighVNC is not running on my OVS. Does anyone have any ideas for why this might be happeneing. ThanksHi,
it seemed when you registered the OVM server to the OVM manager, it did not deliver the correct hostname, but the local address instead.
See if your /etc/hosts contains the hostname in the 127.0.0.1 line.
Correct the /etc/hosts, remove the OVS server and reregister with OVM manager.
Regards
Sebastian -
Hi!
I've had my iPhone 5 for just over a year now, and I haven't really had any problems since iOS7 was installed. I had a PC, with no connectivity problems between any of my Apple devices. Then FINALLY, I purchased my very first Macbook Air 13". I set it all up, updated all the apps, and made sure it was good to go. My iPhone was really low on battery one day, and I just happened to have my USB for it handy and thought I would just plug it into my computer to charge it. I figured I worry about syncing it later as I hadn't really had time to set it all up with iTunes on the new computer.
MY PHONE WENT CRAZY. It just started vibrating all over the table. Looking at the battery icon, it was flipping between charging and not charging, and occasionally the "do you trust this device" window would pop up on the screen, but it was still going crazy. iTunes opened up and these alerts saying "iTunes could not connect to this iPhone. Could not connect to the device." and "iTunes could not connect to this iPhone. This device is no longer connected." All it was doing at this point was using up even more battery. But then the iPhoto app opened by itself on my shiny new Macbook and the vibrating stopped. It was charging and syncing! But not having iPhotos before on a computer weirded me out i hadn't decided exactly what I wanted to do with it, I closed the app. The phone went nuts again. ***. On a different day, I was trying to sync it again, and it worked. But only long enough to back it up on the macbook. W.T.F.
Plugging into any PC is no problem at all. The phone just connects and starts charging.
I've tried just about everything. All of my software is up to date, both on the mac and iphone. The USB cord is fine. I've reset the macbook with it plugged in and not plugged in. I have uninstalled, and reinstalled iTunes with the phone plugged in and not plugged in. I've reset all the contents and settings on my iPhone, as well as did a hard reset with it plugged in and not plugged in. My iPad has no problem connecting and it also has iOS7. It's just so weird though, that it starts connecting/disconnecting interchangeably as soon as I plug it into the computer, even when all my apps are closed. All this is leading me to believe that it must be some sort of issue between the devices' communication to each other. But I'm not sure if it's an iPhone, MacBook, or iTunes issue!
HHHHEEEEELLLLLLPPPPP!!!!!I had this same problem with my new MBP 15", but only with the USB port on the left side. The USB port on the right side worked fine. Perhaps the ports on the left don't have enough signal energy for the iPhone.
Anyway, try using a different USB port, and if that doesn't work, perhaps you could try a powered USB hub. -
Error " Could not connect to SAP R/3 system"
HI:
We have been having some problems with our portal lately and most recently the error that we get is "Could not Connect to SAP R/3 "
The system landscape settings have not been changed.
Thanks for your responses.
RachelWhen I log into the portal and launch the MSS iviews I get the error ( Could not Connect to SAP R/3).
Similarly when I launch ESS I get the following error:
I see that it is lost connection with our SAP R/3 HR system. And system parameters that are available now
are just SAP BW, SEM and CRM..
So looks like we need to re-establish the connection..(?)
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
System 'pcd:portal_content/wwy.KeyStone/com.nrx.pct.vip.systems.sapr3' alias 'SAP_R3_HumanResources' not found. Please check the system object and the alias..
See the details for the exception ID in the log file
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
Parameter Dump
ApplicationParameter
ClassName com.sapportals.portal.appintegrator.layer.SingleSignOnLayer
CodeLink com.sap.portal.appintegrator.sap.bwc.IAC
DebugMode false
DebugMode.default false
DebugMode.type select[false,true]
ExportParameters Authentication, LogonUser, RequestMethod
ForcedRequestLanguage
IAC PP_MY_Profilematchup
MandatoryParameters System, IAC
NavPathUpdate false
NextLayer IAC/ConnectionLayer
OptionalParameters ApplicationParameter, DebugMode
SSO2Template
System SAP_R3_HumanResources
System.type lookup:com.sapportals.portal.appintegrator.lookup.SystemLookup
TopLayer IAC/SSOLayer
UserMappingTemplate login=<MappedUser>&password=<MappedPassword>&~mysapcomusesso2cookie=0
Wizard.MandatoryParameters System, IAC
Wizard.OptionalParameters ApplicationParameter
X509Template
buildTree false
com.sap.portal.reserved.iview.IsolationMode URL
com.sap.portal.reserved.iview.WizardURL pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultIViewWizard
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
MandatoryParameters
System SAP_BW SAP_BW_Q22 SAP_BW_SAND SAP_CRM SAP_CRM_SAND SAP_SEM
Internet Application Component (IAC)
OptionalParameters
Application Parameters
DebugMode No Yes -
ERROR: Could not connect to WhatsApp service. Please try again later.
Hi,
Today there was a connection error with WhatsApp. I needed to send something, so decided to delete and then reinstall the app to try and attempt to fix the connection problem. I am using the iPhone 5C.
Once I redownloaded the app, I opened it and the app asked me for my phone number. I typed it in.
But to my surprise, I got this error:
Could not connect to WhatsApp service. Please try again later.
After several attempts of writing my phone number (100% in the correct format) I had found no luck or success.
Anyone else having this error, or is it just me? Please provide some steps on how to fix this if so!
Thank youThank you for the heads up. It seems like it's working now.
For everyone with this problem please thank AlbertoRuperto and follow these steps:
1. Restart your iPhone.
2. Open WhatsApp.
3. Enter your phone number.
4. Enter verification code (if you're a new member) or just click 'Next' if you're a returning user.
5. Done! All your contacts should be there and your chats (as long as you backed them up).
P.S. This only applies to people who redownloaded and are stuck on phone verification page.
Maybe you are looking for
-
Restore completed status 4014 iphone 5s
i try to restore my iphone 5s form 3 PC and change 2 Cabels every time give me a 4014 and the finall time give me and this is a log for it status:2005 2014-04-14 06:40:05.147 [15724:4538]: restore library built Feb 12 2014 at 16:27:17 2014-04-14 06:
-
I get an exception in starting OC4J (oc4j_extended_1013_dp4.zip file, version 10.1.3) java -jar oc4j.jar (SEVERE) Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/C:/oc4j_1013/j2ee/home/config/jms.xml] Er
-
on normal view my website displays well but on edit the page is distorted that Iis the parts of the pages move away from there normal position.Its like the css is not implemented.
-
Automation Open: the specified object can not be creatable
Hi, When i try interfacing TestStand with labView 7.1,the Acrivex Automation open is throwing the error mentioned above. The object its refering is "Sequence Context" of Test Stand.I could set other properties of TestStand from LabView 7.1 FDS, only
-
Slideshow export - video options grayed out
The slideshow export video options are grayed out. When the slideshow is exported it is sound only, no video.