Can't connect to Time Capsule from Windows

I have a time capsule that I have set up at work which works great with my laptop (MacBook Pro) at work. However, when I try to map the Time Capsule from home (Windows 7, not the same subnet), I cannot do so.
I have been able to ping it, as well as access the Time Capsule configuration page through the AirPort Utility that I have installed on my Windows machine at home (I do so by going to File...>Configure Other... and then log on). So I can communicate with it but I can't map it using the Windows "Map Network Drive" command.
Any thoughts?

I figured it out. I had to change the Time Capsule to only allow File Sharing with Accounts. Then, using the "Map Network Drive" and \\ipaddressaccountname and - viola!

Similar Messages

  • Can't connect to Time Capsule from MBA

    Hi,
    For some weeks I am facing an issue connecting to my Time Capsule. My setup is:
    Time Capsule 802.11ac 3TB (the most recent one), running 7.7.2 (latest firmware), setup with Back To My Mac
    Mac Book Air 13" Late 2010, running Mavericks 10.9.1, Airport Utility 6.3.2, setup with Back to My Mac
    iPhone 4S running iOS 7.0.4
    Basically, I can't connect to the Time Capsule from my Mac Book Air:
    Time Machine doesn't see it in the list of backup disks to choose from
    Airport Utility on Mac Book Air doesn't find itHowever, it is listed under "Other Wi-Fi Devices / Remote Base Stations", from there I can configure it (i think this is thanks to the Back To My Mac settings)
    Finder shows it in the left pane, and can connect to it
    AirPort Utility for iOS on my iPhone sees it fine and can configure it with no issue
    What I could get to work:
    Choose "configure other" in Airport Utility File Menu, type IP address and passwd of the Time Capsule, and Airport Utiliy can configure it (but it still not displayed in the main screen)
    After doing this once, the TC became available in Time Machine (seems to work, first backup ongoing...)
    I tried rebooting, removing .plist files, even did a fresh Mavericks install on my Mac Book Air, same issue.
    Any suggestions ? Is this an issue with Airport Utility ?

    I think it more likely an issue with Mavericks networking.
    MOST IMPORTANT.
    Do you have ipv6 set to link-local for the wireless client in the MBA??
    This is now essential.. and automatic doesn't cut it. Set to the actual ipv6 requirement.
    This is not unusual problem BTW..
    http://support.apple.com/kb/TS4597
    For mavericks I would also ensure your TC has all naming that is short, no spaces and pure alphanumeric. That includes the TC itself plus the wireless.

  • How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

    How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
    I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

    Firstly how are you connecting to the TC.. wireless or ethernet?
    Please open a command window and ping it.. ping by name and by IP address.
    If ping succeeds at least by IP it should work.
    In windows explorer type
    \\10.0.1.1 (or whatever the TC ip is.. that is the default).
    Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
    7.6.4 firmware on the TC is useless. It works better on 7.6.1
    If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

  • Can I connect 3TB Time Capsule to 27" iMac via USB?

    Hi,
           I have an Airport Time Capsule, 3TB which I use for Time Machine backups.  Can I connect the Time Capsule using USB cable from the TC to my 27" iMac desktop Computer?  Is that the most efficient way or is there a more efficient way?  Please advise.
    Thanks,
    relaxed

    Kappy,
          Why is there a USB on the back of the 3TB Time Capsule?  Just a question?
    relaxed

  • I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

    I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

    Restart it.. Does this all the time with Lion and even worse ML.
    Restart the whole network if that doesn't work.. do it in correct order.. from off.. modem.. TC.. clients 2min gap.

  • Access hard disk in time capsule from Windows XP installed in VMware Fusion

    Hello.
    I have installed VMware Fusion 3.0.2 on my iMac (Mac OS X Version 10.6.3) , and then have installed Windows XP on the Fusion.
    Now, I can not access the hard disk in the Time Capsule from Windows XP.
    Does anyone have an idea to overcome this problem?
    Thank you for your help.
    Best Regards,
    Hoss
    hoss_serri (at) yahoo (dot) com

    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Fusion. You should post your question in the Fusion forums:
    http://communities.vmware.com/home.jspa

  • Can I connect my Time Capsule wired to the computer and just use it as a back up

    Can I connect my Time Capsule to my computer (wired) and just use it as a back up and not as a wireless router?

    Yes, you simply bridge the TC..
    Just google for it as we have posted the instructions endlessly.
    The one trick that might be necessary is to ensure the TC is on a different IP range to the main broadband connection.
    And make sure the gateway and dns do not cause issues.. so it is generally better to set static ip on the TC and the computer.
    None of it is hard so ask for specific instructions if you get to the point.

  • Can i connect my time capsule to my hdtv for use as an extra display for my mac book pro?

    I want to use my hdtv as a display wirelessly.  Can one connect their time capsule to the tv?

    1. Can my TC handle "dual band" wifi or not? As it's 3 years old, I'm not sure the spec is sufficient.
    They have been dual band since gen2.. yours is gen4 or at worst gen3.
    2. Is the TC likely to provide better performance than the BT Home Hub router, as the Apple store suggest?
    Impossible to say.. but easy to test.. simply plug the TC into the BT router in bridge mode and use it with setup to create a wireless network.. that is the way I would suggest anyway.
    3. Will the BT wifi extender still work if the TC is the main router? BT aren't sure, hence asking here.  "Trial and error" will take hours and because of the wifi issues in my house, can be frustrating.
    Sorry this is out of my perview.. I can suggest it will be poor.. apple do not use standard settings for extend wireless.. and if it is universal repeater they also behave poorly.. Have you thought of using EOP adapters.. very popular in the UK and tend to work much better than wireless.
    4. Would the BT wifi extender communciate with the TC or the BT Home Hub router?
    As suggested above.. leave the BT as the main router and plug the TC bridged into it.. you can then use both..
    simply set the wireless names different and keep the channels apart.
    For 2.4ghz there are only 3 non-overlapping channels.. 1, 6, 11 or 13 as alternative in UK.
    For 5ghz there are lots more but the lower channels work better.. so 36-48 depending on regs in the UK.

  • Can I connect my Time Capsule using Verizon FIOS

    Can I connect my Time Capsule directly to Verizon FIOS connection?

    Suyiitapi wrote:
    So I have to use Verizon's router first and cannot go directly into Time Capsule then.  Corrrect?
    I am not sure we are talking about the same thing..
    The FIOS is a full router.
    You plug the TC into the FIOS by ethernet.. WAN TC, LAN FIOS.
    Then you plug your computer into TC or FIOS.. or you can use TC wireless or FIOS wireless.. both will connect to both TC and internet. But generally for high speed backups, you will be better connecting directly to the TC.. whether by wireless or ethernet.

  • I can't connect my time capsule to kpn experia box

    I used my time capsule without any problems for some time now, but I have moved and changed provider. Somehow I can't connect the time capsule to the KNP experia box. At first the Time Capsule is not detected, only when I do a hard reset it comes up. Then I give the PPPoE details, the timecapsule restarts and : unexpected error has occured, please try again. When i do try again I get an error almost immediatly.
    I have an time capsule 6.1.
    Any one know a solution?

    You do not use PPPoE on that box.. just bridge the TC.
    In airport utility 6.1 go to the network page.. and select bridge instead of NAT.

  • Can i connect my time capsule with my router as a bridge ?

    can i connect my time capsule with my router as a bridge ?

    I am a bit lost .. did you work this out?? You are running a second thread.. and answered it with this question.
    The TC can be bridged.. plug it into the main router by ethernet and run it in bridge mode.. that is router bridge.
    Do you mean wireless bridge??
    If you mean wireless bridge the answer is maybe but unlikely.
    If you setup the TC to join a wireless network.. it becomes a dumb client not a bridge.
    So to get it to wireless bridge you need to use another apple router.. that is the only way to get them to work.
    If you want specifics ask specific questions.

  • I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal ?

    I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal .i live in a three story home and my linksys is in the basement. I have one cable on the top floor where most of my computers/ipads are.

    can i connect a time capsule through cat 5 cable for my apple products and to boost my signal
    Yes, configure the Time Capsule to create a wireless network using the exact same wireless network name and password as the Linksys wireless network.

  • How do i connect my time capsule from outside my home? i dont have static ip

    sorry about my english...
    its been 4 months now and still I am not able to connect my time capsule via internet from outside . i have read enough forums and discussion but i am confused because every discussion has different answer. please anyone can explain me the simplest way to configure my time capsule so i can connect it from other computers. i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    some questions.
    1. is it possible to use time capsule as nas using dynamic ip address?
    2. if yes how and where can i get exact detail about this.
    3. how to connect my time capsule form my iphone,ipad or other computers . connect through ip address or something else?
    4. is it any simple installation way to do this? i heard about bonjour and icloud but dont know how to connect through this.
    please help me
    thank you
    sachin

    i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    Here is your primary issue.. you cannot connect with win7 ..
    Windows only offers SMB protocol which just about every ISP.. all responsible ones ...block..
    Time Capule offers AFP to internet and only AFP.
    You need to use a Mac to connect.. then use BTMM and iCloud as there is no dyndns in the TC anyway. (Actually there is a dyndns but only for apple btmm use...  you cannot access.
    If you want to or have to use windows.. then get a proper vpn router that offers vpn endpoints to windows and has dyndns.. setup the TC in bridge behind the vpn router and access via vpn .. this is the only safe way of connecting using SMB.

  • We traded our home internet service for a Sprint Hot Spot.  The hot spot does not have an ethernet port to connect through.  Can we connect our time capsule to the wireless hot spot?

    Hello, we switched our home internet service from an ethernet modem to a wireless hot spot. 
    Do you know if there is a way to connect our time capsule to the hot spot? 
    Everything I read only suggests connecting through an ethernet cable.  I'm hoping there is a way to do this.
    Any help would be appreciated!
    Thanks!!!

    No you can't join a wireless hotspot with a Time Capsule directly via it's 'join' option (tried and failed - well to be exact it kinda works but the Time Capsule's ethernet ports no longer work).
    What you can do is buy an airport express and use it's 'join' option to connect to the iPhone's hotspot. Then you connect the airport express via ethernet to the time capsule (in bridge-mode).
    You can then connect your computers to the time capsule via ethernet or use it's wireless function to set up wireless network (with a different name to that of the hotspot) that your wifi stuff can connect to.
    Thingi

  • Changed Service Provider and now I can't connect my time capsule

    Must I do a soft reset on my time capsule to connect it to my new wireless network?  I have an Orange Fibre Play network and even if I connect the Time Capsule using an ethernet cable, it can't see it.

    Setup the TC by doing a full factory reset.
    Soft reset is useless.. that doesn't change anything.
    And hard reset does not get rid of the old settings.
    So full factory and if it doesn't show up on wireless.. use ethernet in full isolation to the network to do the initial setup.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Factory reset Gen 5
    Hold in reset for about 5sec until the status light flashes quickly.
    If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
    Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.

Maybe you are looking for