Can't connect to Time Capsule using Ethernet

Hi All
I've got a new Macbook Pro, and want to migrate my old machine across.  First attempt took 3 days wirelessly and then failed, with no given reason or explanation.  I want to attempt to restore this a 2nd time, but would like to use ethernet as I can't afford another 3 days of being in limbo. 
The problem is that I can see the Time capsule wirelessly, but can't see it via Ethernet. 
Any clues?

(I think this is the way they're supposed to be set up)
Unfortunately, no. The Setup Manual does not even cover this type of configuration. You must have discovered this by poking around in the setup utility, etc.
An Ethernet cable connection to the modem or router is always the way to go for speed and reliability.
One thing that you may not have thought about in your current setup is that the wireless signal must make two "hops" for a backup. One hop from your Mac to the wireless router and then another wireless hop back out to the Time Capsule.
So, not only will it take more much more time....the chances of an error are doubled.
I recommend that you consider reconfiguring the Time Capsule correctly by connecting it directly to the your wireless router using an Ethernet cable. Then, wireless backups only make one "hop"....and...you have the option to connect directly to one of the Ethernet ports on the Time Capsule to speed the backup by 4-5 times over wireless.
In general, you can expect to backup about 25-30 GB an hour using Ethernet.
If you do not need the wireless network that the Time Capsule provides, it is a simple matter to turn off the wireless on the Time Capsule. 

Similar Messages

  • Can I connect my Time Capsule using Verizon FIOS

    Can I connect my Time Capsule directly to Verizon FIOS connection?

    Suyiitapi wrote:
    So I have to use Verizon's router first and cannot go directly into Time Capsule then.  Corrrect?
    I am not sure we are talking about the same thing..
    The FIOS is a full router.
    You plug the TC into the FIOS by ethernet.. WAN TC, LAN FIOS.
    Then you plug your computer into TC or FIOS.. or you can use TC wireless or FIOS wireless.. both will connect to both TC and internet. But generally for high speed backups, you will be better connecting directly to the TC.. whether by wireless or ethernet.

  • Can I connect 3TB Time Capsule to 27" iMac via USB?

    Hi,
           I have an Airport Time Capsule, 3TB which I use for Time Machine backups.  Can I connect the Time Capsule using USB cable from the TC to my 27" iMac desktop Computer?  Is that the most efficient way or is there a more efficient way?  Please advise.
    Thanks,
    relaxed

    Kappy,
          Why is there a USB on the back of the 3TB Time Capsule?  Just a question?
    relaxed

  • Can I connect my Time Capsule wired to the computer and just use it as a back up

    Can I connect my Time Capsule to my computer (wired) and just use it as a back up and not as a wireless router?

    Yes, you simply bridge the TC..
    Just google for it as we have posted the instructions endlessly.
    The one trick that might be necessary is to ensure the TC is on a different IP range to the main broadband connection.
    And make sure the gateway and dns do not cause issues.. so it is generally better to set static ip on the TC and the computer.
    None of it is hard so ask for specific instructions if you get to the point.

  • Can i connect my time capsule to my hdtv for use as an extra display for my mac book pro?

    I want to use my hdtv as a display wirelessly.  Can one connect their time capsule to the tv?

    1. Can my TC handle "dual band" wifi or not? As it's 3 years old, I'm not sure the spec is sufficient.
    They have been dual band since gen2.. yours is gen4 or at worst gen3.
    2. Is the TC likely to provide better performance than the BT Home Hub router, as the Apple store suggest?
    Impossible to say.. but easy to test.. simply plug the TC into the BT router in bridge mode and use it with setup to create a wireless network.. that is the way I would suggest anyway.
    3. Will the BT wifi extender still work if the TC is the main router? BT aren't sure, hence asking here.  "Trial and error" will take hours and because of the wifi issues in my house, can be frustrating.
    Sorry this is out of my perview.. I can suggest it will be poor.. apple do not use standard settings for extend wireless.. and if it is universal repeater they also behave poorly.. Have you thought of using EOP adapters.. very popular in the UK and tend to work much better than wireless.
    4. Would the BT wifi extender communciate with the TC or the BT Home Hub router?
    As suggested above.. leave the BT as the main router and plug the TC bridged into it.. you can then use both..
    simply set the wireless names different and keep the channels apart.
    For 2.4ghz there are only 3 non-overlapping channels.. 1, 6, 11 or 13 as alternative in UK.
    For 5ghz there are lots more but the lower channels work better.. so 36-48 depending on regs in the UK.

  • Changed Service Provider and now I can't connect my time capsule

    Must I do a soft reset on my time capsule to connect it to my new wireless network?  I have an Orange Fibre Play network and even if I connect the Time Capsule using an ethernet cable, it can't see it.

    Setup the TC by doing a full factory reset.
    Soft reset is useless.. that doesn't change anything.
    And hard reset does not get rid of the old settings.
    So full factory and if it doesn't show up on wireless.. use ethernet in full isolation to the network to do the initial setup.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Factory reset Gen 5
    Hold in reset for about 5sec until the status light flashes quickly.
    If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
    Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.

  • Can i connect my time capsule with my router as a bridge ?

    can i connect my time capsule with my router as a bridge ?

    I am a bit lost .. did you work this out?? You are running a second thread.. and answered it with this question.
    The TC can be bridged.. plug it into the main router by ethernet and run it in bridge mode.. that is router bridge.
    Do you mean wireless bridge??
    If you mean wireless bridge the answer is maybe but unlikely.
    If you setup the TC to join a wireless network.. it becomes a dumb client not a bridge.
    So to get it to wireless bridge you need to use another apple router.. that is the only way to get them to work.
    If you want specifics ask specific questions.

  • Connecting to Time Capsule via Ethernet

    Hi,
    I'm working on a Tiger OS and I cannot connect to my time capsule. I followed instructions in the manual, but I simply do not see Time Capsule on my desktop, and there is very little info in the manual.
    I am working off of ethernet, not airport, and would prefer to used ethernet for the moment. I have it connected via LAN port to my macbook pro. There's only one ethernet port on my computer. Does anyone have any advice? I know about about Macs, but dont have much experience with network specs.
    I simply need to archive data, but I cannot see Time Capsule on my desktop. Time Capsule is connected just fine to my modem, but now how do I connect to my computer? I've tried to unplug ethernet from my computer, and into the LAN port on my capsule, but to no avail.
    I am absolutely clueless as to how I can use this machine at this point??
    Thanks much.

    Jean,
    You probably don't have the Network Preferences set correctly.
    Connecting The Time Capsule Via Ethernet
    Connect one end of a Cat-5 Ethernet cable into one of the LAN ports of the TC (<•••>).
    Connect the other end to your Macs ethernet port.
    Open Network Preferences.
    At the top change "Location:" to "Ethernet Connection".
    In the list on the left "Ethernet" should be at the top of the list. (If not use the Action Menu (gear button) at the bottom to "Set Service Order".)
    Click "Apply" in the lower right.
    Give it a moment to acquire an IP address from the TC.
    You should now be connected.
    Now begin your initial backup.
    Now that you are reconnected to the TC, you should still have internet access during the backup.
    Let us know if this was helpful. Next time start a new thread, you're more likely to get helpful responses that way.
    Cheers!

  • I can't connect my time capsule to kpn experia box

    I used my time capsule without any problems for some time now, but I have moved and changed provider. Somehow I can't connect the time capsule to the KNP experia box. At first the Time Capsule is not detected, only when I do a hard reset it comes up. Then I give the PPPoE details, the timecapsule restarts and : unexpected error has occured, please try again. When i do try again I get an error almost immediatly.
    I have an time capsule 6.1.
    Any one know a solution?

    You do not use PPPoE on that box.. just bridge the TC.
    In airport utility 6.1 go to the network page.. and select bridge instead of NAT.

  • I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal ?

    I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal .i live in a three story home and my linksys is in the basement. I have one cable on the top floor where most of my computers/ipads are.

    can i connect a time capsule through cat 5 cable for my apple products and to boost my signal
    Yes, configure the Time Capsule to create a wireless network using the exact same wireless network name and password as the Linksys wireless network.

  • I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

    I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

    Restart it.. Does this all the time with Lion and even worse ML.
    Restart the whole network if that doesn't work.. do it in correct order.. from off.. modem.. TC.. clients 2min gap.

  • We traded our home internet service for a Sprint Hot Spot.  The hot spot does not have an ethernet port to connect through.  Can we connect our time capsule to the wireless hot spot?

    Hello, we switched our home internet service from an ethernet modem to a wireless hot spot. 
    Do you know if there is a way to connect our time capsule to the hot spot? 
    Everything I read only suggests connecting through an ethernet cable.  I'm hoping there is a way to do this.
    Any help would be appreciated!
    Thanks!!!

    No you can't join a wireless hotspot with a Time Capsule directly via it's 'join' option (tried and failed - well to be exact it kinda works but the Time Capsule's ethernet ports no longer work).
    What you can do is buy an airport express and use it's 'join' option to connect to the iPhone's hotspot. Then you connect the airport express via ethernet to the time capsule (in bridge-mode).
    You can then connect your computers to the time capsule via ethernet or use it's wireless function to set up wireless network (with a different name to that of the hotspot) that your wifi stuff can connect to.
    Thingi

  • Can anyone access time machine backup files by connecting to time capsule by ethernet cable?

    I operate an imac connected to a time capsule. It works great. My internet is connected to the time capsule with an ethernet cable and I access the internet on my imac using an ethernet cable connected to the time capsule. I can also connect to the time capsule using wireless.
    A colleague of mine wants to connect to the internet and because of location issues the only convenient way is to let him connect to my time capsule using an ethernet cable. He can access the internet fine and he uses a windows PC. Now my question is, will he be able to access my time machine backup files if he connects to my time capsule using an ethernet cable? I have not given him my password.
    Any help will be appreciated. I want to help him get online but I want to make sure he cannot access my time machine backup files.
    Thanks

    There are actually 3 passwords on the Time Capsule - assuming it has the same setup as my Airport Extreme Base Station.
    One password for the WiFi connection.
    One password to access setup of the device
    One password for access to the storage drive - most people leave the check-box to just use the base-station setup password again.
    And, as I said before, you also have the option to encrypt your TM backups.  So even if somebody runs off with the device and breaks in to the disk, it will all be garbage without the TM password.
    This is the screen as it is on my computer:
    As you can see, to access my drive I have it set to use the device setup password.
    Here is a screen shot of the other options:

  • HT1178 can i connect the time capsule to a router?

    i am having problems setting up the time capsule for the first time.  it works when i connect the time capsule to my mac via ethernet cable.  however, i am trying to have it connect to my mac wirelessly.  so i pluget it into my router through the wan port, but it flashes yellow. 

    Flashing amber can mean anything .. it is just an error which you need to find in the airport utility the exact description.
    But I recommend reconnect by ethernet first.
    Setup wireless again.. this time use new name.. short, no spaces pure alphanumeric.. TC24ghz for example.. and different name for 5ghz.. TC5ghz works.
    Lock the wireless channels used particularly for 2.4ghz.. choose out of 1, 6, 11.
    Setup WPA2 Personal security with 8-12 character passkey.. pure alphanumeric.
    Update the TC, and disconnect the ethernet.. but do not move it yet.. with the Mac close by try to connect to the wireless.. if it still fails.. something is wrong in the hardware on one side or the other.
    If you get wireless working, determine if the router or modem you plug into is going to be the main router.. in which case bridge the TC. Or if the TC will be the main router.. setup the TC to connect by dhcp or pppoe depending on the broadband type.

  • IMac can't locate my time capsule - using BT HomeHub

    I can't locate my time capsule on my wireless network to enable back ups.  I have an iMac running Yosemite (but the problem pre-dates the update), a 1TB TC and a BT Infinity HomeHub (.n standard).  I want to use the HomeHub wireless network not the TC's, but all the apple documentation refers to using the TC's wireless network.  I've tried plugging the TC into the home hub via both the normal TC ethernet port and the TC WAN port - no joy.  I can back up fine if I connect the iMac and TC via cable, so the problem is down to the network.  Any suggestions please?

    I can't locate my time capsule on my wireless network to enable back ups.  I have an iMac running Yosemite (but the problem pre-dates the update), a 1TB TC and a BT Infinity HomeHub (.n standard).  I want to use the HomeHub wireless network not the TC's, but all the apple documentation refers to using the TC's wireless network.  I've tried plugging the TC into the home hub via both the normal TC ethernet port and the TC WAN port - no joy.  I can back up fine if I connect the iMac and TC via cable, so the problem is down to the network.  Any suggestions please?

Maybe you are looking for

  • Key-enable buttons on a JOptionPane

    Hi, The existing code in my Application uses a JOptionPane static method = JOptionPane.showOptionDialog() to create a dialog box.Is there any way I can key-enable the buttons on the dialog created by this method. public int createAndShowGUI() { if (!

  • How to create a setup for window form application including the related sql database?

    i have created a simple window form application project that have only 2 form.. 1st one for login in which it'll check the userid n password from database.if both are correct then it will go to 2nd form. now i want this project to run in another comp

  • IChat AV 3.1.4 and ensuring that video and audio chat is always possible.

    Hello, My girlfriend has recently bought an iBook G4 and we have both bought iSights. We performed a video conference whilst we were both at home, which worked with no problems at all. However, she is spending the weekend at her parents, and when we

  • How do I remove blocked plug in for Java?

    How do I remove the blocked plug-in for Java. I have tried to download a new version of Java but I am not a "computer person" and do not understand the proceedures.

  • Single app purchased (Flash CC asked for serial number)

    I just bought single app from (flash profesional) for 1 month membership. I got invoice and bill, but still can't use the product. I tried to find my serial on my plan & product, but i still missing it .When i try to open flash, adobe flash cc ask me