Can't connect to Wi-Fi after Lollipop upgrade

Since updating my D6503 to Lollipop 5.0.2 (Build 23.1.A.0.726) yesterday, I can't connect to my workplace's Wi-Fi anymore. I'm still able to connect to my home and public Wi-Fi networks.
My workplace network settings:
WPA2 Enterprise
EAP method: PEAP
Phase 2 authentication: MSCHAPV2
CA certificate: (Unspecified)
DHCP server.
I am able to connect to this network using my credentials on other devices - but my Xperia Z2 just refuses to establish a connection. I've tried "forgetting" the network, restarting the phone (including in safe mode). No success.
Is anybody else having this problem? And is Google or Sony working on fixing this?
-- Hayden

Hi,
Do you have the possibility to restart the router? Just to see if this simple thing can help. Have you tried to add/connect to the network manually via Settings > Wi-Fi > Menu button (three dots) > Add network.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Can't connect to wifi network after iOS update

Can't connect to wifi network after iOS update.

This does not work in my case.
Situation: we have wifi at home using WPA encryption.
The iPod Touch 8GB connected seamless to this network and anything was ok. After some days i could no longer connect, the iPod told me "connection to network 'networkname here' failed". Deleting the network and reenter the (correct) passphrase was no help, but changing the SSID on the router was helpful: the iPod could connect again ... for several days.
Now things stopped working again. Resetting network settings did not help either.
The iPod can see the network, is asking me for the passphrase and after several seconds telling me: can't connect. On the router log i don't even see a dhcp request, but other laptops work fine with the same wifi network.
That's a mess, i cannot and will not change the SSID every some days just to get the iPod working again.

Can't connect ipad to wifi after upgrading to ios6

can't connect ipad to wifi after upgrading to ios6

Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi. (This is probably not practical in your situation.)
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.

hi ALL
OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.
Exchange environment contains 2 Exchange Mailboxesserver ,( one Failed , virtual Machine)
2 cas Servers
first databases could not be mounted but after we run the below command , users can use OWA but outlook could not connect
Start-DatabaseAvailabilityGroup -Identity DAG -MailboxServer MBX1
please support
thanks

Hi,
According to your description, I understand that Outlook client cannot connect to Exchange server 2013 while one member of DAG failed.
If I have misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether all account store in MBX1 experience this issue, users in MBX2 works fine.
Please run following command to double check the database status:
Get-MailboxDatabase –Status | select Name,Mounted,MountedOnServer
If it works in OWA, the issue may be related to Outlook side. Please run “Test E-mail AutoConfiguration” and “Outlook Connection Status” to get more details, expecial the setting of proxy server, it’s more helpful
for further troubleshooting.
Additional, please try to recreate a profile for testing. Besides, please move active DB back to MBX1.
Best Regards,
Allen Wang

Front cam deteriorated after lollipop upgrade

Afte lollipop upgrade front cam pictures are very sloppy and blurry . Previously they were much much better now the picture quality is too bad as if I am using a 0.2 pixel cam
Has anyone faced this issue pl help me

I can assure everyone here that both the cameras are WORKING PERFECTLY FINE with me in fact after lollipop upgrade, the main camera has become much much much more awesome!
Have a look at my Z1 cam's improvement - http://i.imgur.com/6Cor3JK.jpg
Either the phone is still not updated correctly, or you have some wrong settings in your 'manual camera settings'
Try this - Clear defaults, cache, and settings for your phone's camera application and try again.
P.S. I was using GoogleCamera for these photos in kitkat and in lollipop as well (link attached)
Feel free to ask away :-)

I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

I am going on the guess that an old driver is still installed...
Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
Reset the Printing System:
OS X Mavericks: Reset the printing system
Now, Add the printer in Print & Scan prefs.

My camera connection kit stopped working after I upgraded to ios5

My camera connection kit stopped working after I upgraded to ios5. If I plug it in to my iphone I get a message saying it is not recognised, but when I plug it into the ipad it does nothing at all. I've tried resetting it, but that makes no difference.
I have an ipad 1 which I bought because it had lots of storage. I'm going on holiday soon, and I want to be able to upload my holiday photos to my ipad while I'm away.
Any suggestions?

Actually this sounds the same problem I have on my iPad2.
I use a cheap copy of the CCK which I got off eBay.
It worked great when fitted with a 16gb SD card, but since I upgraded to 5.01 it has stopped working.
Sorry, no solution at this point but it worked on 4.3.3 but not on 5.01.
I'll keep on looking, was considering a proper CCK thinking the cheapmversion may be drawing too much current, but it sounds like that might not work either.

Outlook can't connect with Exchange 2013 after migration from Exchange 2007

<style type="text/css">P { margin-bottom: 0.21cm; }</style>
Hello,
recently we've done a Exchange 2007 sp3 to 2013 sp1. Users can conect perfectly with OWA and with his iphone clients.
But the problem is they can't connect from his Outlook clients (2010, 2013), both internaly and externaly. Always fails with the message: The Connection to Exchange it is not avaliable.... Can't resolve the name of Exchange server.
To try to resolve it we've done:
- Check Outlook anywhere configuration en EAC: it is configure with and external url mail.company.com and internal server.domain.local. The security is the default Negociation, but we've tried all.
- Check the internal dns, there are records for mail.company.com and exchangeserverdomain.local pointing to the exchange local ip. Also there is a public zone company.com with the record mail.caompany.com pointing to the exchange local ip. Also we've made
records autodiscover.company.com and autodiscover.domain.local pointing to the exchange local ip.
- In the public dns from our domain there is the record A and MX pointing our public ip. There aren't any record Autodiscover but we think that the manial conection should work.
Check certificates: we've made a new self-signed certificate including all this internal and external domains and for all services.
- Check Outlook Anywhere block: we've cheked.
Currently server state:
- Old Exchange 07 server can't start, it was in very bad state and we achieved migrate the mailbox to the new server, after that we tried to uninstall, but it crashes with a public folder replication error. We got uninstall all the roles
unless the mailbox. After a restart it can't start.
-The new Exchange 2013 looks great, there isn't any trail of the old server, or we haven't seen anything in the EAC or shell.
I paste below the result of Microsoft Remote conectivity analaizer, with Outlook anywhere test. It is clear that there is a problem with that.
Sorry because the test is in spanish and I translated it with google, from here I only can access the tool in spanish.
We continue to try to resolve the problem.
Thanks to all in advance!
Testing RPC / HTTP connectivity.
Error in testing RPC / HTTP.
additional Details
Elapsed time: 24295 ms.
Test steps
Connectivity Analyzer Microsoft is trying to test Autodiscover for [email protected] .
Error in automatic detection test .
additional Details
Elapsed time: 24294 ms.
Test steps
Attempting each method of contacting the Autodiscover service .
Failed to properly contact the Autodiscover service using all methods.
additional Details
Elapsed time: 24294 ms.
Test steps
Trying to prove possible Autodiscover URL https://empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 1509 ms.
Test steps
Attempting to resolve the host name in DNS empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 80.36.252.194
Elapsed time: 507 ms.
Testing TCP port 443 on the host to ensure empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 464 ms.
Testing the SSL certificate to make sure it is valid.
The SSL certificate is not exceeded one or more certificate validation checks .
additional Details
Elapsed time: 537 ms.
Test steps
Connectivity Analyzer Microsoft is attempting to obtain the SSL certificate from remote server on port 443 empresa.com .
Connectivity Analyzer Microsoft successfully obtained the remote SSL certificate.
additional Details
Remote Certificate Subject : CN = mail.empresa.com , issuer : CN = mail.empresa.com .
Elapsed time: 454 ms.
Validating the certificate name .
The certificate name was validated successfully .
additional Details
Hostname empresa.com was found at the entrance of the alternative subject name of the certificate.
Elapsed time: 1 ms.
Is validating the trusted certificate .
Validation Error trusted certificate.
Test steps
Connectivity Analyzer Microsoft is trying to build certificate chains for certificate CN = mail.empresa.com .
Could not build a certificate chain for the certificate.
Tell me more about this issue and how to resolve
additional Details
The certificate chain did not end in a trusted root . Root = CN = mail.empresa.com
Elapsed time: 31 ms.
Trying to prove possible Autodiscover URL https://autodiscover.empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 21723 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 498 ms.
Testing TCP port 443 on the host to ensure autodiscover.empresa.com listening or is open.
The specified port is blocked , not listening or does not generate the expected response .
Tell me more about this issue and how to resolve
additional Details
Network Error communicating with the remote host.
Elapsed time: 21224 ms.
Attempting to contact the Autodiscover service with the HTTP redirect method .
Error when trying to contact the Autodiscover HTTP redirect method .
additional Details
Elapsed time: 606 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 14 ms .
Testing TCP port 80 on the host to ensure autodiscover.empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 202 ms.
Connectivity Analyzer Microsoft is checking the automatic detection of host empresa.com for an HTTP redirect to the Autodiscover service.
Connectivity Analyzer Microsoft could not get a HTTP redirect response for Autodiscover .
additional Details
Web exception occurred because an HTTP 404 response was received - Unknown NotFound . Headers received: Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27:58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 +
lenny3 with Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3 HTTP Response Headers : Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27: 58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 + lenny3 with
Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3
Elapsed time: 388 ms.
Attempting to contact the Autodiscover service using the method of DNS SRV redirect server.
Connectivity Analyzer Microsoft could not contact the Autodiscover service using the DNS SRV redirect method .
additional Details
Elapsed time: 186 ms.
Test steps
Trying to find the SRV record in DNS _autodiscover._tcp.empresa.com .
Not the Autodiscover SRV record in DNS found .
Tell me more about this issue and how to resolve
additional Details
Elapsed time: 186 ms.
Checking for a CNAME record for Autodiscover in DNS for your domain " empresa.com " to Office 365.
Could not validate the Autodiscover CNAME record in DNS. If your mailbox is not in Office 365 , you can ignore this warning.
Tell me more about this issue and how to resolve
additional Details
No Autodiscover CNAME record for your domain ' empresa.com ' .
Elapsed time: 268 ms.
jspt

Hello,
We have the Self-signed certificate that comes with Exchange, and we've created a new self-signed including all our domains mail.company.com, domain.local, exchange13.domain.local, autodiscover.company.com, autodiscover.domain.local.
below I print you the result os the comand Get-ClientAccesServer | fl . Now we've configured a SPC objetct folow the instructions of Wizard
Exchange Server Deployment from Microsoft. We've executed the commands in our new Exchange 13, but can't did it in the old Exchange:
$AutodiscoverHostName = "autodiscover.contoso.com"Get-ExchangeServer | Where {($_.AdminDisplayVersion -Like "Version 8*") -And ($_.ServerRole -Like "*ClientAccess*")} | Set-ClientAccessServer -AutoDiscoverServiceInternalUri https://$AutodiscoverHostName/Autodiscover/Autodiscover.xmlThis is the result of
RunspaceId                           : 89c86f8e-d156-4480-b31d-59215976879b
Name                                 : EXCHANGE13
Fqdn                                 : EXCHANGE13.domain.local
ClientAccessArray                    :
OutlookAnywhereEnabled               : True
AutoDiscoverServiceCN                : EXCHANGE13
AutoDiscoverServiceClassName         : ms-Exchange-AutoDiscover-Service
AutoDiscoverServiceInternalUri       : https://autodiscover.company.com/Autodiscover/Autodiscover.xml
AutoDiscoverServiceGuid              : 77378f46-2c66-4aa9-a6a6-3e7a48b19596
AutoDiscoverSiteScope                : {Nombre-predeterminado-primer-sitio}
AlternateServiceAccountConfiguration :
IsOutOfService                       : False
WorkloadManagementPolicy             : DefaultWorkloadManagementPolicy_15.0.825.0
Identity                             : EXCHANGE13
IsValid                              : True
ExchangeVersion                      : 0.1 (8.0.535.0)
DistinguishedName                    : CN=EXCHANGE13,CN=Servers,CN=Exchange Administrative Group
                                       (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=First Organization,CN=Microsoft
                                       Exchange,CN=Services,CN=Configuration,DC=domain,DC=local
Guid                                 : e83055fe-217b-4ed6-9cd0-7711097baf99
ObjectCategory                       : domain.local/Configuration/Schema/ms-Exch-Exchange-Server
ObjectClass                          : {top, server, msExchExchangeServer}
WhenChanged                          : 09/03/2014 12:46:07
WhenCreated                          : 08/03/2014 19:15:54
WhenChangedUTC                       : 09/03/2014 11:46:07
WhenCreatedUTC                       : 08/03/2014 18:15:54
OrganizationId                       :
OriginatingServer                    : severdc.domain.local
ObjectState                          : Unchanged
I hope this stuff can help you.
Thanks!!
jspt

Why can NOT my apple TV connect to itune store after I upgraded it to ios 5.1(5201)?

I am in Singapore, and own this apple tv for a few days and everything were alway ok.
Today, I upgraded the ios to version 5.1(5201). After the upgrade process was done, the apple tv can not login to itune store.
I am a software engineer. I confirm that the network setting are fine and the username and password are correct, so I doubt it is server's problem.
Even when I "reset all setting", I can not activate my Apple TV.
Even more, I try to click "update software", and it said "it is unsuccessful ...". I remembered that it should inform me "the version is newest" before I "reset all setting".
So, I doubt it is because before the server serving Singapore has some problem now.
However, now I can not choose location to US or others, because after I upgraded, the location selection box is empty.
So, I have no idea.........

I check the internet connection status of my Apple TV, and got the result as
192.168.2.101     118.214.190.18     TCP     www     Accepted
192.168.2.101   118.214.190.17     TCP     www     Accepted
192.168.2.101   17.154.66.38         TCP     www     Accepted
192.168.2.101   118.214.190.18     TCP     www     Accepted
192.168.2.101   118.214.190.17     TCP     www     Accepted
192.168.2.101   118.214.190.18     TCP     www     Accepted
192.168.2.101   118.214.190.17     TCP     www     Accepted
192.168.2.101   17.154.66.38             TCP     www     Accepted
192.168.2.101   118.214.190.18     TCP     www     Accepted
192.168.2.101   118.214.190.17     TCP     www     Accepted
192.168.2.101   118.214.191.77     TCP     www     Accepted
192.168.2.101   118.214.191.54     TCP     www     Accepted
, where 192.168.2.101 is my Apple TV's ip.
And I also set up a DNS server and check which domains Apple TV queries, and found that
    ax.init.itunes.apple.com(118.214.190.17 118.214.190.18 118.214.191.54 118.214.191.77 all in Singapore)
    iphonesubmissions.apple.com(17.171.60.16)
    phobos.apple.com(17.154.66.38)
    mesu.apple.com(118.214.190.152)
And ip of ax.init.itunes.apple.com are all in Singapore.
I am doubt the iOS 6.0 (TV software 5.1(5201) ) has not been deploy to Singapore. Last time, I select location as US, so it informed me to update to iOS 6.0.

Can't Connect to WiFi Network After Changing Encryption

I have an iPod Touch that no longer connects to my wifi network at home.
Some background: I have an aipport extreme base station with three XP laptops, an iMac and a printer connected to it wirelessly. I use a WPA Personal password. My wife's iPhone connects without a problem.
I recently changed the password on the base station to WPA Personal because one of the laptops could not connect using WEP (solution to inconsistent hashing of 13 character password problem found elsewhere in this forum). Ever since changing the password, the iPod touch will not connect.
I have looked for, but cannot find the "Forget Network" button on the wifi network page on the iPod touch (I understand that button appears after you have successfully connected to the network). I have reset the iPod up to and including removing all data.
When I go into the settings>wifi menu, I see the network's SSID. When I input the password, I get a "cannot connect to . . . " message.
Any ideas on how to solve this problem?
Thanks

This does not work in my case.
Situation: we have wifi at home using WPA encryption.
The iPod Touch 8GB connected seamless to this network and anything was ok. After some days i could no longer connect, the iPod told me "connection to network 'networkname here' failed". Deleting the network and reenter the (correct) passphrase was no help, but changing the SSID on the router was helpful: the iPod could connect again ... for several days.
Now things stopped working again. Resetting network settings did not help either.
The iPod can see the network, is asking me for the passphrase and after several seconds telling me: can't connect. On the router log i don't even see a dhcp request, but other laptops work fine with the same wifi network.
That's a mess, i cannot and will not change the SSID every some days just to get the iPod working again.

Can't connect to SL mini after laptop update to Lion

Situation:
- Mac Mini on Snow Leopard 10.6.8 (mini-old)
- Mac Mini on Lion 10.7.4 (mini-new)
- Macbook Pro on Lion 10.7.4, update from Snow Leopard 10.6.8 since yesterday
I used to be able to connect file sharing and screen sharing from the laptop to both mini's. Since the update to Lion on my laptop, I can't connect to mini-old from the laptop.
- file sharing from laptop to mini-old before the lion update -> worked
- screen sharing from laptop to mini-old before the lion update -> worked
- file sharing from mini-new to mini-old -> works
- screen sharing from mini-new to mini-old -> works
- file sharing from laptop to mini-new -> works
- screen sharing from laptop to mini-new -> works
- file sharing from laptop to mini-old after lion update, with guest -> works
- file sharing from laptop to mini-old after lion update, with registered user -> endless pinwheel, no error in console
- screen sharing from laptop to mini-old after lion update -> endless pinwheel, no error in console
- ssh user@mini-old from laptop to mini-old after lion update -> works
So I can safely assume the settings on mini-old are ok (haven't been changed in many months).
I've tried deleting the caches with OnyX on the laptop, but that didn't help.

Update: 'several' minutes = 10
Same goes for the file sharing.
I've tried the screen sharing a 2nd time to see if it speeds up, but it doesn't. :-( Don't know yet what's going on, because the connection from the mini-new is instantly.
FYI: all three are on the same local network, so no remote 'across the internet' issues.
Anybody?

Can't connect to the database after 1-2 day, Named Pipes Provider, error: 40,Microsoft SQL Server, Error: 121

HI
I have a problem. I can't connect to the database. It said :
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 121)
When I restart the server, I can connect normally. But after 1-2 days, it can't be connected.
How can I fix this?

Hi Lee,
Please refer to the following article to configure SQL Server 2005 to allow remote connections:
http://support.microsoft.com/kb/914277/en-us
Regards,
Elvis Long
TechNet Community Support

Can not connect to iTunes store after resetting password

After resetting password on iPhone 5,iPad can not connect to iTunes. Any one know how to correct?

I am having the same Issues.

Software Update can't connect to the internet after a new install of 10.6

I had a clean install of 10.6 and after that the Software Update can't connect to the internet (the status bar hangs at the beginning and finally it prompts me the internet is not connected) while all my other applications can.
Someone help me out?

I am having exactly the same problem as well.. has anybody managed to solve this yet? I have uploaded Snow Leopard - try to connect to Software Update - the menu bar scans a little then stops and then an error saying 'Not connected to the internet'' but the connection is working fine!!
Is this a SL issue? or just an overload with the Software Update programme? I cant do anything - no update for itunes/iphone software, etc.. most annoying.
Look forward to seeing some good news and some answers to this one.
Cheers
Linda

Can't connect to music store after updating itunes; ?connection refused?

Can someone from itunes please help. i mean ****. i guess u guys don't think of the people in ur forums that have problems. i have a problem accessing the music store. it says the network connection was refused. please check ur settings...blah blah blah. anyway the point is there are tons of people with this problem, no solutions, end of story. and lots of people have been having this problem right after updating their itunes. WHATS WRONG WITH THIS PICTURE? just tell us how to fix our music store. then maybe people would actually still use itunes instead of limewire.

The iTunes Music Store uses both HTTP Port 80 and 443. Make sure both are open in any firewall, and also make sure that the following domains are exempted in any firewall/filtering software:
phobos.apple.com
phobos.apple.com.edgesuite.net
You might want to completely shut down any firewall temporarily, just to see if that makes a difference. If you can then connect, you know it's a problem with your firewall.
Another possibility is an erroneous entry in the Hosts file. This tip from Mark Holly resolved problem for another poster (please note that I have not tried this fix so I cannot vouch for nor support the suggestion: I provide it only as a suggestion that worked for someone else):
NOTE: this will change a Windows operating system file. This could cause you problems if not done correctly.
Using Windows Explorer navigate to the following folder:
C:\WINDOWS\system32\drivers\etc.
In this folder is file called 'hosts'. Open it using Wordpad.
On the poster's pc there was in this file one long line. At the end of this line was "127.0.0.1 phobos.apple.com:. phobos.apple.com is the web address for the music store. What "127.0.0.1 phobos.apple.com" is doing is telling the pc to look for the web address only on the computer rather than the internet. By remove this section of the line and saving the changes you may then be able to access the music store without any problems.
IMPORTANT: Before making the changes to the hosts file I highly recommend making a backup of it. That way you can restore the original if other problems occur.
Hope this helps.

Can't connect to Wi-Fi after Lollipop upgrade

Similar Messages

Maybe you are looking for