Can't connect to wifi after bootcamp

ICan't connect to wifi after bootcamp.
I install windows 7 on my MacBook Pro retina 15.
Windows is staring up but I can't connect to network.
It says I need a driver (network driver) how do I get it?
But when I run the Mac with Macintosh HD all work normal.

Did you follow the Bootcamp instructions and download and install the Windows Support software?

Similar Messages

Can't connect to wifi after updating to iOS 6

can't connect to wifi after updating to iOS 6

really stupid... but click on the arrow to the right of your netowrk and turn off auto-join

Can't connect to wifi after connecting to Starbucks wifi

I know it sounds awkward that I can't connect to any wifi network after I connected to Starbuck's at&t wifi network, but that is the last time I've been able to. I'm not sure if it's just a coincidence or if that is the reason I haven't been able to after this. I had 2.1 since day 1 and it worked always perfectly until Starbucks that one time. A few days later, I updated to 2.2 and still everything is fine except for the wifi, same issue.
Issue: Wifi is on and it just keeps showing "Choose a network..." with the icon spinning, but no networks show up. Ask to Join networks is on, but when I go to any program, it doesn't ask to join anymore. I've tried resetting network settings, turning on/off normally, doing a hard reset by holding down and not turning it off normally. I don't know what else to try. Nothing with the network router has changed, but even then I would expect it to list it at least or show all the other networks around the apartment, but none show up. My wife's phone connects to it fine. I've also tried clicking on Other... and then putting in the network name and it doesn't find anything. Something is abnormally wrong.
Any ideas would be appreciated.
Thanks.

Hmmm.....
It's worth a hard reset (press and hold the sleep/wake button and the Home button together, ignoring the 'slide to power down' message and then release them when the display blanks. Press the sleep/wake button until the logo appears and then wait for the restart which takes a little while...)
Apart from that, it may be worth clearing Safari's cache, etc..... (Settings > Safari > Clear History/Cookies/Cache)
In any event, 'Good luck'!!
If all else fails it IS possible that some WiFi hotspots are VERY hot and emit more power than is really allowable in the Standards, resulting in 'frying' your WiFi receiver (possible but unlikely). If this is the case, return your iPhone to an Apple store with the 'WiFi not working' message but don't mention Starbuck's or anyone else.....just don't use Starbuck's WiFi service ever again!

Can't Connect to WiFi After Updating To 2.2

Hey guys,
I just updated my software to 2.2, and now all of a sudden i can't connect to my wireless router at home. I can easily connect to it using my phone, but can't using my ipod. I've searched around a bit, and still can't find a solution.
When i go to settings, WiFi Networks, then i click on the blue arrow next to my router name, the only thing that is entered is my i.p address, and subnet mask. The router and DNS fields are blank. The i.p address number that was automatically entered into it is 169.254.46.155, and the subnet mask is 255.255.0.0
I have tried resetting the network settings, and turning my D-Link DI-524 Router on and off, but still no luck. In Safari i get the message "Safari cannot open the page because it is not connected to the internet" even though the wifi logo is active on the top, and it has a full strength bar of 3 bars.
Any help guys? It's really starting to **** me off. Is it a problem with 2.2 in general? My router doesn't have a WEP key by the way. I chose not to give it a password.
Cheers for the help.

Thanks for your offer to help.
I have wasted considerably more time than Mike even - let's say 24 hours spread over 4 weeks trying to get a Touch to connect to my wifi network. For the first two weeks, the Touch saw my network but refused to connect. It had a self-assigned IP 169 address. I did all the recommendations and suggestions - renewed the DHCP lease (20 times?), reset the network settings (50 times?), restored the entire Touch to factory settings (twice), entered and reentered and double double double checked the passwords and the case sensitivity and so on (more times than it is polite to tell you), and it still wouldn't connect.
Then, last week, it stopped even seeing my network. I suppose the benefit of that is that at least no-one can now advise me to renew the lease or fix the 169 IP - I can't even see the bxxxxy lease or IP setting any more! The error message is "could not find the network xxxx".
So, please do point me in the right direction - I'll be eternally grateful. I've just totally reset the Touch (again) to out of the box factory settings - and it doesn't see the network transmitted from an Apple Time Capsule one foot away from it.
The home network was totally reset yesterday afternoon, so I do know what the settings are.

I can't connect to WiFi after update

I can not connect to my router and WiFi anymore.

On your Iphone: Do the following: Settings > General > Reset > Reset Network Settings
Then log-in to your Wifi again.

Can't connect to Wifi after restoring factory settings and restoring backup (internet on computer working just fine)

Want to die. I've wasted my entire Sunday trying to connect to Wifi on my phone. I tried the reset network settings, restored the phone to factory settings then restored the backup and still no game. I have restarted the **** thing and am very frustrated. Every time I've updated my software with Apple I end up having to replace my phone. I have an appointment with the genius bar tomorrow ,but hopefully someone here can help me so I don't jump in a river before that time.

Hmmm.....
It's worth a hard reset (press and hold the sleep/wake button and the Home button together, ignoring the 'slide to power down' message and then release them when the display blanks. Press the sleep/wake button until the logo appears and then wait for the restart which takes a little while...)
Apart from that, it may be worth clearing Safari's cache, etc..... (Settings > Safari > Clear History/Cookies/Cache)
In any event, 'Good luck'!!
If all else fails it IS possible that some WiFi hotspots are VERY hot and emit more power than is really allowable in the Standards, resulting in 'frying' your WiFi receiver (possible but unlikely). If this is the case, return your iPhone to an Apple store with the 'WiFi not working' message but don't mention Starbuck's or anyone else.....just don't use Starbuck's WiFi service ever again!

IPhone 4s can't connect to wifi after iOs 8.1.1

So yesterday I updated my iPhone 4s to iOs 8.1.1 and now it seems like it doesn't connect to wifi anymore. It shows the wifi-icon on the system tray, and when I go into settings/Wifi/*Network* it shows all the correct data. I already tested it on 3 different networks, and all the same problem. I just drains my cellular instead :/
I already tried hard reset and network settings reset

I have iphone 4s with upgrad to 8.1.1, coudn't connect to App Store. Each time I put password in utilities screen it would disappear.
I don't know which part worked but I cleared the safari history and cookies and enable location and it worked.

Windows XP on MacBook Pro - Can't connect to wireless after bootcamp, why?

1)I just bought MacBook Pro, just did a boot camp with windows xp. With Windows xp installed, it can't detect wireless network. What went wrong?
2)When setting the boot camp, do i need to have the boot camp driver? Why?
3)Can Windows xp on Macbook pro use the same built-in modem, or do i need to get a modem/ adaptor for windows on mac, so the wireless (on window xp on mac) would be able to work.

hannah llc wrote:
1) I just bought MacBook Pro, just did a boot camp with windows xp. With Windows xp installed, it can't detect wireless network. What went wrong?
2) When setting the boot camp, do i need to have the boot camp driver? Why?
Did you install Apple's bootcamp drivers after you installed Windows? You should be able to accomplish that by booting into Windows and then inserting the installation disc that came with your MacBook Pro. Without Apple's drivers, Windows may not know how to use the wireless circuitry on your Mac.
3) Can Windows xp on Macbook pro use the same built-in modem, or do i need to get a modem/ adaptor for windows on mac, so the wireless (on window xp on mac) would be able to work.
With the proper drivers Windows should be able to use the wireless equipment that came with your Mac.

Can't connect to wifi after IOS update. Do you know a solution?

Loaded the new update and now it is sporatic connections with the wi fi. I have unplugged the router and all that, still no luck. It will work normally very briefly, but only briefly after I unplug the router, etc.
Do any of you have a solution to fix this?
Thank you!

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can't connect to WIFI after upgrading to IOS 6

After upgrading to IOS6, my 4S stopped connecting any available wifi networks. It keep poping up "Unable to join the network "***" " when I tap any wifi spots I've been used so far. My problem is not like most people says. Instead of taking me the the apple website, mine doesn't even connected! This problem has been around for a week. I have to relay on 3G so far. I've tried resting the wifi setting, resting the iphone and even tried a lot of public wifi spots. It still doesn't work. Is it the problem of hardware? Help me, plz!

The solution lies in the router password encryption. There is the option WPA2 instead of current WPA/WPA2 on my router. I changed the setting to just WPA2 and it worked now. But the former option worked on iOS5.1.1. Thanks!
[Update]Turns out it is still unresolved. After the changing the encryption I restarted the router and it is still the luck I got before. The connection will not last long. Still unable to connect.

2007 security update can't connect with wifi after sleep

After applying the 2007-001 security update I could no longer get to the any web pages even though internet connect showed I had a good connection. After checking my network settings I noticed that my Power book had a self applied IP address. I deleted the internet .plist files in my user/library/preferences folder and rebooted. Then my network settings showed a valid ip address. After putting the Power book to sleep for a while. I had to go through the whole routine again. Has anyone found a fix for this?

Hello Peter
Albeit this is a late reply, I have found that if I disconnect from
the net via the Airport symbol on the Finder's task bar that, works for me.
It is odd since this issue is most prevalent with 10.4.8 & intel in particular.
However I have experienced it on my powerbook running 10.4.8.
My Flat panel runs os 10.3.9 but is connected via ethernet & that does not have this issue.
Make sure your Router/Modem is updated on it's firmware.
I don't know how you connect, however try DNS Server #'s if you do not have those entered in your, DNS server field, TCP/IP tab, Network, In System pref.
Look for your ISP's server # here
FYI, for many ppl.in the States, the Verizon numbers work well.
Verizon (Level3) - these are not restricted to Verizon customers
4.2.2.1
4.2.2.2
Of course the DNS maybe filled all ready & have nothing to do with
your problem, thought I would add it.
Hope this helps some, if you look at your post.
Eme'~[)

Can't connect to WiFi after OS update and reboot of Playbook

Phoned RIM Support, and was advised it is a known problem, and our best people are working on it. Not sure how they will communicate fix to a device that may be corrupted.

I've been having the same problem for the past couple of weeks after an OS update. I had previously tried rebooting my router but I mustn't have turned it off long enough because I tried it again today and it seems to have solved the problem.

Retina macbook pro can't auto connect to wifi after wifi router rebooted

My macbook pro with retina can’t automatically connect to wifi after the wifi router was rebooted. There is exclamation mark on wifi sign. As I clicked the wifi sign, it shows no Internet connects. However, It is strange there is a tick in front of my wifi name. In order to use wifi, I had to click off wifi, and then click on. The previous version, Macbook pro, has no problem like this. I had deleted all files under wifi library, but still fail. Appreciating for any way to solve it!

My macbook pro with retina can’t automatically connect to wifi after the wifi router was rebooted. There is exclamation mark on wifi sign. As I clicked the wifi sign, it shows no Internet connects. However, It is strange there is a tick in front of my wifi name. In order to use wifi, I had to click off wifi, and then click on. The previous version, Macbook pro, has no problem like this. I had deleted all files under wifi library, but still fail. Appreciating for any way to solve it!

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't w

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't why rhapsody doesn't work anymore?

Contact Rhapsody to see if they have or plan to release an update for the app. Try uninstalling and reinstalling the app. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

I just bootcamp my macbook white to windows 7 home premium and I can't connect to wifi now! Plz help

I used to run windows xp on my macbook with no problem.
I just bootcamp to windows 7 and can't connect to wifi! T_T plz help...
I can't see the wifi bar at the noti panel just the monitor with a red cross.
Need help....

Hee hee thank you for the reply! Just install the boot camp setup drivers... haha its working now thank you!

Can't connect to wifi after bootcamp

Similar Messages

Maybe you are looking for