Can't connect to wifi in airplane mode

Hey all, I am abroad, so have airplane mode on, and am trying to use wifi. Under settings, my Iphone seems connected to the right network. When I open Safari & put in username & pwd, Safari just freezes. I tried Debug Console & got two errors:
"HTML error on Line 25
http://132.32.0.173/hsm/login.php
<form> cannot act as a container inside <table> without disrupting the table. The children of the..."
"HTML Error on Line 26
http://132.32.0.173/hsm/login.php
<input> is not allowed inside <tbody>. Inserting <input> before the <table> instead.
I can't reset the router or wifi as I'm at a hotel, but I have no trouble connecting to the same wifi network with my laptop, using Internet Explorer as a browser. Can anyone kindly help?

P.S. I did that a few times, also tried turning off wifi and turning it back on and trying again, also rebooted, and then tried the debug console. Then, unable to figure out those error messages, I posted

Similar Messages

Port forwarding but can only connect to wifi in Bridge Mode

Hi
Our ISP is TalkTalk and we use their Fibre service which connects through a BT Open Reach Modem. The TalkTalk router seemed to causing drop outs in wifi on my macbook pro so I bought an Airport Time Capsule for the wifi router and to back up my mac.
We aren't issued with PPPoE details and the advice from the TalkTalk community was to connect with the Router in Bridge Mode. This has worked a treat with the various Apple and non Apple items we have in out house except one.
We have security cameras which we control through a Windows laptop and can view one out phones. To make this happen we have to set up port forwarding. However, we can't do this as it's in Bridge Mode (as far as I understand).
I'm afraid my knowledge of these things is very basic so I'm hoping that someone will have an easy answer to this. Anyone got any advice on how I can make this pretty white box do its stuff please?
Thanks in advance!

No idea what a double NAT is but you clearly do so here goes...
traceroute 8.8.8.8 on the mac gives as follows:
traceroute to 8.8.8.8 (8.8.8.8), 64 hops max, 52 byte packets
1 192.168.1.1 (192.168.1.1) 6.246 ms 2.840 ms 2.875 ms
2 89-168-80-1.dynamic.dsl.as9105.com (89.168.80.1) 14.513 ms 14.967 ms 20.831 ms
3 host-78-151-225-23.static.as13285.net (78.151.225.23) 19.752 ms 20.399 ms 28.106 ms
4 host-78-151-229-12.as13285.net (78.151.229.12) 19.760 ms
    host-78-151-225-140.static.as13285.net (78.151.225.140) 18.391 ms
    host-78-151-225-136.static.as13285.net (78.151.225.136) 18.467 ms
5 host-78-144-8-11.as13285.net (78.144.8.11) 29.582 ms
    host-78-144-8-53.as13285.net (78.144.8.53) 31.276 ms
    host-78-144-8-5.as13285.net (78.144.8.5) 27.278 ms
6 72.14.214.222 (72.14.214.222) 37.593 ms 25.132 ms
    72.14.242.127 (72.14.242.127) 30.195 ms
7 209.85.252.188 (209.85.252.188) 27.070 ms
    209.85.252.186 (209.85.252.186) 77.680 ms
    209.85.252.188 (209.85.252.188) 24.477 ms
8 209.85.253.90 (209.85.253.90) 24.506 ms
    209.85.253.196 (209.85.253.196) 29.255 ms
    209.85.253.90 (209.85.253.90) 26.403 ms
9 66.249.95.173 (66.249.95.173) 41.521 ms
    72.14.232.134 (72.14.232.134) 35.473 ms 30.789 ms
10 209.85.251.231 (209.85.251.231) 30.069 ms
    216.239.49.45 (216.239.49.45) 31.578 ms
    209.85.252.83 (209.85.252.83) 31.383 ms
11 * * *
12 google-public-dns-a.google.com (8.8.8.8) 38.442 ms 30.063 ms 30.282 ms
traceroute 8.8.8.8 on the mac plugged into the HG533 gives as follows:
traceroute to 8.8.8.8 (8.8.8.8), 64 hops max, 52 byte packets
1 192.168.1.1 (192.168.1.1) 0.999 ms 0.679 ms 0.668 ms
2 89-168-80-1.dynamic.dsl.as9105.com (89.168.80.1) 13.577 ms 12.817 ms 13.668 ms
3 host-78-151-225-23.static.as13285.net (78.151.225.23) 16.828 ms 15.490 ms 24.315 ms
4 host-78-151-225-140.static.as13285.net (78.151.225.140) 18.755 ms
    host-78-151-225-30.static.as13285.net (78.151.225.30) 20.538 ms
    78.151.229.0 (78.151.229.0) 19.488 ms
5 host-78-144-8-29.as13285.net (78.144.8.29) 23.690 ms
    host-78-144-8-39.as13285.net (78.144.8.39) 26.756 ms
    host-78-144-8-59.as13285.net (78.144.8.59) 23.145 ms
6 72.14.242.127 (72.14.242.127) 24.608 ms 26.403 ms
    72.14.214.222 (72.14.214.222) 22.601 ms
7 209.85.255.78 (209.85.255.78) 26.205 ms 23.783 ms
    209.85.252.186 (209.85.252.186) 25.291 ms
8 209.85.253.94 (209.85.253.94) 25.553 ms
    209.85.253.196 (209.85.253.196) 58.607 ms 31.902 ms
9 66.249.95.173 (66.249.95.173) 49.369 ms
    72.14.232.134 (72.14.232.134) 32.418 ms 32.654 ms
10 72.14.238.43 (72.14.238.43) 34.146 ms
    209.85.252.83 (209.85.252.83) 34.292 ms
    216.239.49.45 (216.239.49.45) 29.860 ms
11 * * *
12 google-public-dns-a.google.com (8.8.8.8) 36.619 ms 36.902 ms 29.731 ms
Hope this gives the result we're after

If I turn on the wifi during airplane mode, can this damage my iPhone 3Gs in someway?

If I turn on the wifi during airplane mode, can this damage my iPhone 3Gs in someway? I sometimes would like to turn of the company signal, but at the same time I would like to use the internet; without taking our the SIM card. Can this damage my iPhone in any form? It would be grateful your help!

"If I turn on the wifi during airplane mode, can this damage my iPhone 3Gs in someway?"
No. This is a normal feature of the iphone. It is intended to work this way.

TS1398 My Ipad can't connect to WiFi. I tried to reset and connect to the wifi network, it will divert me to the IOS page...could you please help? Thanks.

My Ipad can't connect to WiFi. I tried to reset and connect to the wifi network, it will divert me to the IOS page...could you please help? Thanks.

Try a soft reset or turn the device completely off then turn it back on again. Also you can toggle Airplane mode on for about 10 seconds and then turn it off. Sometimes that resets the radio signal inside the device.
A soft reset is basically holding onto the power button and the home button simultaneously together for about 10 seconds or until you see the screen flash and it should go completely black. Afterwards, tun the device back on like normally and see if that fixes the problem.

IPhone 4s and can't connect to wifi,wifi is grayed out and says "No wifi".FREEZER TRICK WORKS!

I have iPhone 4s wchick cannot connect on wifi,wifi is grayes out and says"No wifi",i restart my phone,i reboot it and finally i restore it the problem remains,i put it on a freezer for more than 5 minutes and works for 1-2 minutes,but when outside temperature returns on the phone still can't connect on Wifi!what to do?
Anyone having the same problem?My iPhone 4s its not 6 months old!

Try restoring your phone usng DFU mode. Here are steps to get DFU Mode: Open iTunes on computer. Connect iPhone to computer. (some turn off iPhone here, I do not) Hold both home and power buttons for exactly 10 seconds, release power button, keep holding home button until iPhone recognizes iPhone in Recovery Mode. Usually takes 10-20 seconds of holding the home button. If the iPhone screen is black (blank) the iPhone is in DFU Mode.

Can't connect to wifi following upgrade to OS 2

I've just upgraded my blackberry playbook to OS 2 and now I can't connect to wifi. Previously save connections are no longer present. Connection attempts don't go past 1st attempt of three.
I've tried broadcasting the ssid and turning off the access control list.
Any ideas on how to fix?
Thanks,
Solved!
Go to Solution.

pedrocadiz wrote:
I've just upgraded my blackberry playbook to OS 2 and now I can't connect to wifi. Previously save connections are no longer present. Connection attempts don't go past 1st attempt of three.
I've tried broadcasting the ssid and turning off the access control list.
Any ideas on how to fix?
Thanks,
Could you please give spec like router make and model, what security mode, what mode as far as being b/g/n
Be a Shepard and not an iSheep.

I can't connect to wifi at home on business hub ? So cannot update my iPhone 5 Help!

I can't connect to wifi at home on business hub ? So cannot update my iPhone 5 Help!

wifi is wifi, and business hub means very little.. this is area for time capsule discussion.. but the standard measures apply.
1. Set wireless name (SSID) to a name that is short, no spaces and pure alphanumeric. Eg your Business Hub call wireless BH. There is no need for names longer than that.
2. Set wireless channel for 2.4ghz to 11 or 6 or 1. Please test in that order. In Eurozone you can add 13 or use it instead of 11. They are the only 3 non-overlapping channels.
3. Use no security to test.. of course this is unsafe long term.. so this is to test for a few minutes only.
The only security that should be used with N wireless is WPA2 TKIP-AES .. it can be named several different things ie in Apple routers it is WPA2 personal. Use a passkey of 10-20 characters.. more if you are paranoid, mix of upper and lower case + numerics.. so pure alphanumeric.
4. If it fails set the mode to G wireless. It is more consistent standard.
If it still fails buy an Apple router and use that as WAP.

Linsys WRT160NL can't connect to wifi

I have a problem with my Linsys WRT160NL. i need to reboot my AP everyday in the morning to connect to wifi. i can't connect to wifi without reboot. How can fix this problem???

What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
What ISP Modem service link speeds UP and Down do you have?
Check cable between Modem and Router, swap out to be sure. Link>http://en.wikipedia.org/wiki/CAT6 is recommended.
Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask.
For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled.
Router and Wired Configurations
Setup DHCP reserved IP addresses for all devices ON the router. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.
Ensure devices are set to auto obtain an IP address.
If http://en.wikipedia.org/wiki/Ipv6 is an option on the router, select Local Connection Only.
What wireless modes are you using?
2.4Ghz Routers only: Try single mode G or N or mixed G and N?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&r...
What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8ce9e83bd3784001aee72da7f1ef48e8_Changing_the_basi...
What wireless devices do you have connected?
Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
Any other WiFi routers in the area? Link> Use http://www.metageek.net/support/metageek-software-archives/ to find out. Use v3. How many?
WMM Support must be enabled for single wireless N mode to function.
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.

I can't connect to wifi with iPhone5. Does anyone knows why? and what to do?

I can't connect to wifi with iPhone5. Does anyone knows why? and what to do?
Thank you.

The Holy Mecha of Wifi
Turn router off then on Try turning your wireless router off then back on.
Change or turn off wireless security You may want to try toggling the settings on your wireless router, switching from WPA to WEP or vice versa, or, as a last resort, turning wireless security off altogether. For AirPort routers, this can be accomplished with the AirPort Admin Utility. For other routers, this can usually be accomplished by accessing the router’s configuration page — open a browser and enter the address 192.168.1.1.
Reset network settings on iPad. On your iPad, open Settings, then navigate to “General” in the left-hand pane. Scroll down and tap Reset, then select “Reset Network Settings.” This will delete any stored WiFi passwords and other information, but may result in a more stable connection.
Adjust brightness upward. Oddly, a number of users have found that they can resolve this issue by simply adjusting the iPad’s brightness level upward and off the lowest setting. To do this, tap Settings, then select “Brightness & Wallpaper” from the left-hand pane. Slide the brightness bar upward, then wait 1-2 minutes and check for an improvement in signal strength. Speculation holds that a power delivery issue associated with the screen brightness affects Wi-Fi.
Change thresholds in router settings. Access your routers configuration screen (for most routers, open a browser and enter the address 192.168.1.1), then change the fragmentation threshold and the CTS/RTS threshold as described here. Some users have found success with the settings Fragmentation= 2048, RTS = 512.
Change 802.11 spec on router. Try changing your router’s wireless spec mode from B, G and N to G only or vice versa. For AirPort routers, this can be accomplished with the AirPort Admin Utility. For other routers, this can usually be accomplished by accessing the router’s configuration page — open a browser and enter the address 192.168.1.1.
Switch routers. Although a far-from-ideal solution, some users have found success with switching to a different wireless router.
Turn off “Ask to Join Networks.” To do so, tap Settings on your iPad, then select “Wi-Fi” from the left-hand pane. Slide “Ask to Join Networks” to off. Speculation holds that leaving this option on causes the iPad to constantly seek networks, resulting in some type of interference with the network to which it is connected.
Forget network then rejoin. Tap Settings on your iPad, then select Wi-Fi from the left-hand pane. Choose the network with which you are experiencing difficulty, then select “Forget this network.” Go back to the previous screen and rejoin the network.
Turn off Bluetooth. Some users report that, perhaps due to interference issues, turning off Bluetooth can boost Wi-Fi signal strength. To do so, tap Settings then tap General in the left-hand pane. Tap Bluetooth in the right-hand pane, then slide to off.

HT1695 Can't connect to wifi, most of the time on but can't detect, sometimes grey untouchable

iphone4s can't connect to wife pls help

Is it greyed out in settings??
I had the exact same issue with a 2 year old iPhone. I read up on it all day and tried everything. Last ditch - I tried a weird solution I found online and it worked. Overheat the iPhone gently with a hot hair dryer until it gives the Temperature alert and goes into recovery mode.
Now put it in a Ziplock bag and place it in the freezer for 5-10 minutes. If it comes back on you are ready to do teh following.
Go to Settings / General / Reset / Reset Network Settings. Reset it.
This takes a few mins. Once complete - force reboot the iPhone holding down the Home and Power buttons for about 10 second simultaneously. Once you see the Apple reboot let go.
It's weird - it was my last roll of the dice - but it worked. I was able to switch on the WiFi and it connected.
There is a Canadian post online where many people have had the same success

My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't w

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't why rhapsody doesn't work anymore?

Contact Rhapsody to see if they have or plan to release an update for the app. Try uninstalling and reinstalling the app. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

Can't connect to wifi in hotels in Ireland with iPhone 5

Can't connect to wifi in hotels in Ireland with my iPhone 5. My iPad 3 works fine. When I enter the wifi password for the network I always get the error message "Incorrect password for XYZ". No problem with iPad 3.

Returned home only to find the same situation with my home network. Much time on chat support with Apple. Short story long: Must have been corrupted software. Had to restore original original software then add back apps and music. Couldn't back up before doing the restore so I lost a bunch of pics, but at least the phone is working once again.

I just bootcamp my macbook white to windows 7 home premium and I can't connect to wifi now! Plz help

I used to run windows xp on my macbook with no problem.
I just bootcamp to windows 7 and can't connect to wifi! T_T plz help...
I can't see the wifi bar at the noti panel just the monitor with a red cross.
Need help....

Hee hee thank you for the reply! Just install the boot camp setup drivers... haha its working now thank you!

TS1398 my wifi button doesnt work. Can't connect to wifi.

My wifi button doesn't work. Can't connect to wifi suddenly..

yes, ive restarted it several times.. still doesnt work. ive also tried resetting network settings.. still didn't work.. ive just updated the software last week..

Can't connect to wifi in airplane mode

Similar Messages

Maybe you are looking for