Can't connect to wifi network - password problem?

I just bought a new MacBook Pro C2D 2.16, but I can't get it to connect via airport to my wifi network at home. When I use the network setup assistant, i'm prompted to enter the WPA password, but then i get a message saying "password invalid"? If I try connecting through the Internet Connect window, it says: "there was an error joining the airport network"?
After reading through the forums a bit, I tried changing the WPA password, changing to WEP, and even using the open setting, but my MBP still won't connect to my DSL router (Zoom X6 router). My other Windows laptop connects fine.
This is my first Mac, and I'm a bit clueless regarding networking as well, so any advice is appreciated. BTW, I've got OSX 10.4.8 installed.
Macbook Pro 2.16 Mhz C2D Mac OS X (10.4.8)

I solved it! Well, not really - I just did a bit more searching on the forums and found someone else with the same problem - solution: Update the firmware's router, and now my MBP can connect properly, with WPA2.

Similar Messages

  • I can't connect to wifi network and bluetooth on iPhone 4S.  Need help.  Have already rebooted everything and reset network setting

    I can't connect to wifi network and bluetooth on iPhone 4S.  Need help.  Have already rebooted everything and reset network setting

    I have the same problem; tried a phone restore, both restoring data and setting up as new phone with factory settings, reset all settings, re-boot, remove apostrophe, put in fridge, you name it!
    I think there's quite a few iphone 4s users with the same problem!
    I called Apple they said it's a hardware problem, but it has worked for nearly two years; they say go to the Apple store and they can provide a replacement phone for approx. £150!
    I've been into the O2 shop where I bought it and they knew the problem exactly; said they had sent a few phones off for repair and had them back awith a report they cannot fix it because it's a software problem!
    An assistant in the shop had the same issues; logic says it's a software problem and hopefully Apple will fix it with a patch but at the moment they seem to be avoiding everyones comments!
    If anyone else has any ideas these would be appreciated?

  • Can't connect to wifi network after iOS update

    Can't connect to wifi network after iOS update.

    This does not work in my case.
    Situation: we have wifi at home using WPA encryption.
    The iPod Touch 8GB connected seamless to this network and anything was ok. After some days i could no longer connect, the iPod told me "connection to network 'networkname here' failed". Deleting the network and reenter the (correct) passphrase was no help, but changing the SSID on the router was helpful: the iPod could connect again ... for several days.
    Now things stopped working again. Resetting network settings did not help either.
    The iPod can see the network, is asking me for the passphrase and after several seconds telling me: can't connect. On the router log i don't even see a dhcp request, but other laptops work fine with the same wifi network.
    That's a mess, i cannot and will not change the SSID every some days just to get the iPod working again.

  • With new OS6 I can't connect to wifi network with my iPhone

    Ever since I upgraded to the new iOS6, my phone will no longer connect to my wifi networks. It only works on 3G. Tried to reset networks and various other things to no avail. Not happy ...

    Hello,
    I tried the Apple Support recommendation but nothing works, my Ipad mini still can't connect to wifi network, the wifi function in the setting menu it's not available.
    I would like to send my device for technical support in USA. I'm live in Venezuela.
    How can I do it?
    Thank in advance

  • Can't connect to WiFi networks via tray icon, manually adding works fine

    I've searched for about a day for anyone having a similar issue and have come up with nothing so far.  I have an older HP laptop with Windows 7 32 bit that is having issues with connecting to WiFi networks.  It will find all available wireless
    networks just fine, and when I select mine, it comes up with the prompt to enter my password, however when I hit OK to connect, the prompt disappears and nothing happens or responds afterwards.  A few things that I've tried in order to troubleshoot and
    narrow down the problem:
    -I've tried connecting to two different wireless networks; one with WPA2 encryption and one with no encryption, both have the same issue (obviously the non-encrypted wireless network doesn't prompt for a password, but once I hit connect all prompts disappear
    and acts as if I did nothing).
    -I've added the WPA2 encrypted network manually to my list of wireless networks, and once I do this it connects just fine.  When removed, it disconnects and the issue happens again (this confirms that the wireless password I'm entering is correct and
    that there are no issues with the wireless network itself, as well as other devices working flawlessly on the same wireless network).
    -I've disabled all firewalls and antivirus through this whole process, did not make a difference.
    -I've reset winsock which didn't make a difference.
    -I've run a virus scan, no viruses on the laptop.
    I've run out of ideas as to what would prevent being able to connect to a wireless network through the normal process of finding nearby access points, putting in your password, and having it work.  I understand that I could simply leave the wireless
    network added manually, but this is not an option for when the laptop is taken elsewhere as having to add whatever wireless network I'm near manually is not something that should have to be done.

    I would recommend to update the driver for you wireless nic as a first step. Also, if installed, get rid of third party utilities that 'manage' your wireless network(s)
    Also check if you can
    clear out the remembered connections i've encountered issues before when a network with same ssid but different connection settings was stored by windows.
    MCP/MCSA/MCTS/MCITP

  • Can't Connect to WiFi Network After Changing Encryption

    I have an iPod Touch that no longer connects to my wifi network at home.
    Some background: I have an aipport extreme base station with three XP laptops, an iMac and a printer connected to it wirelessly. I use a WPA Personal password. My wife's iPhone connects without a problem.
    I recently changed the password on the base station to WPA Personal because one of the laptops could not connect using WEP (solution to inconsistent hashing of 13 character password problem found elsewhere in this forum). Ever since changing the password, the iPod touch will not connect.
    I have looked for, but cannot find the "Forget Network" button on the wifi network page on the iPod touch (I understand that button appears after you have successfully connected to the network). I have reset the iPod up to and including removing all data.
    When I go into the settings>wifi menu, I see the network's SSID. When I input the password, I get a "cannot connect to . . . " message.
    Any ideas on how to solve this problem?
    Thanks

    This does not work in my case.
    Situation: we have wifi at home using WPA encryption.
    The iPod Touch 8GB connected seamless to this network and anything was ok. After some days i could no longer connect, the iPod told me "connection to network 'networkname here' failed". Deleting the network and reenter the (correct) passphrase was no help, but changing the SSID on the router was helpful: the iPod could connect again ... for several days.
    Now things stopped working again. Resetting network settings did not help either.
    The iPod can see the network, is asking me for the passphrase and after several seconds telling me: can't connect. On the router log i don't even see a dhcp request, but other laptops work fine with the same wifi network.
    That's a mess, i cannot and will not change the SSID every some days just to get the iPod working again.

  • Can't connect to WiFi network

    My steps (iPhone 4S):
    1. Settings > Wi-Fi.
    2. Tap on my wireless network.
    3. Enter password.
    4. Tap "Join".
    Result: A message comes up with zero delay, saying that it was unable to join the network. No further infromation is provided.
    100% positive that password is correct - entered it four times on device, then entered it on laptop and it was accepted there.
    100% positive that network is correct - no other networkin range has a name even remotely close to it.

    Any problem connecting with any other wi-fi network?
    http://support.apple.com/kb/ts1398
    Find information on connecting to a Wi-Fi network.
    Some third-party routers may not be compatible with all iOS devices, even after updating to the latest firmware. If your iOS devices can successfully connect to other Wi-Fi networks, contact your router's manufacturer to ensure that your router is compatible with your iOS device.
    See recommended settings for configuring your Wi-Fi router for use with iOS devices.

  • [SOLVED] Can't connect to wifi network

    Hey everyone.
    I just installed Arch on my lenovoT400.
    I'm having problems connecting to wifi.
    It worked fine until now. Don't know if I changed anything but it's not working now.
    so, I type "wifi-menu", OK, it doesn't ask for a password and then I get this output
    Job for netctl@wlp3s0\x2dLej\x20Flleshat.service failed. See 'systemctl status netctl@wlp3s0\x2dLej\x20Flleshat.service' and 'journalctl -xn' for details.
    Please help. I wanna install a GUI and I can't because of this.
    Thanks in advance
    Last edited by Agonche (2013-11-08 01:13:30)

    Agonche wrote:I found a temporary solution....I stoped NetworkManager.service and now it's working but I want to use NetworkManager, not netctl.
    How do I do that?
    Disable and Stop netctl and enable ans start NetworkManager.   netctl services include the device name; find out which permutations are running with systemctl.

  • Can´t connect to wifi network on IPAD and I have tryed everything

    i have an ipad and i can connect it to a wifi network everywhere but not at my work... there  is people there that have iphones and samsumg galaxy that can connect and all the laptops used there have wifi connection... i have already tryied to use the tips that apple gives on its site.... Does anyone suggests anything?

    Restart your router.

  • Can not connect to wifi-network

    I have a iphone 4 that I managed to lose in the toilet. it is relatively in good condition,but can not connect to wi-fi networks. seems as if it is unable to receive signals. is there anything I can do to fix it?
    and I have no dial tone when I call. what can I do?

    Apple has an out of warranty replacement program for phone's like yours, cost in the US is $199. That would be your best course of action.

  • Can't connect to WiFi network with a WEP3 password

    i have trouble connecting my ipod touch 3G to my Wifi hat home. we are using a WEP3 key, but i can't find a way to tell my ipod to use that.
    i guess it is autimaticall yon WEP1 - is there any way to change it?

    safari=windows_4G-nano-2gen. wrote:
    Suggest to apple to support WEP3 for iOS devices. In my house I control wireless setting, because my parents don't know how, but really check with your dad and tell him how much this messes up your iPod experience.
    Suggestions to Apple should go here: http://www.apple.com/feedback/ipodtouch.html
    However, I doubt that Apple (or any other manufacturer) will do much on WEP; it is easily cracked by hackers (in minutes) and has been deprecated by the standards group since 2004. Move to WPA2.

  • My iphone 5 can't connect to wifi network at my home

    last week i bought iphone5 and before i could but i don't know what happend it's 2days can't find network .it's choosing network but there is no any way
    please help me i'm so tierd about this prb thx
    my carrier is true H

    This is nothing special:
    turn off wifi in your phone, disconnect modem and router from power, wait 10 seconds, connect the modem and wait till it is fully started, then connect the router to power and wait a few seconds till it has started, then set wifi on in your phone.

  • IPhone 6 can't connect to WIFI anymore

    Ok, since my iPhone 5 has been updated to 6.1, it can't connect to WIFI networks anymore and from time to time restarts for no reason.
    I tried to restore from iTunes, and now I wan't to back it up from iCloud, which can't happen without WIFI.
    Can anyone help me with this issue?
    Thanks in advance!

    I have the exact same problem. There are countless other threads on this and I have tried all the tricks in the book to get it to work again. With no success. I cannot connect to any wifi router (home, work, public...). I also restored the phone various times and now can't backup from iCloud because of missing Wifi. This is extremely frustrating. I really hope Apple puts out an iOS update very soon as this issue as all but new.

  • IPad Can't Connect to School Network Post-iOS 4.2.1

    I can't connect to wifi network on campus now that I've updated my iPad to iOS 4.2.1. The odd time when I can connect, the Internet takes forever to load a page & often it just times out making my wifi only iPad useless at school (the reason I bought the thing). Meanwhile my iPhone on 4.2.1 works on the school wifi with no problems. My iPad works on every other wireless network I've tried except for the campus one. I've even tried resetting my network settings & resetting my iPad but nothing works.
    HELP!

    Sorry I don't have a solution, but you should follow this link:
    http://discussions.apple.com/thread.jspa?threadID=2657404
    Your problem is not uncommon and eventually a solution may be found in there.

  • My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

    My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Additional field in contact Backup Nokia 9500

    I want to take my nokia 9500 to repair a broken hindge! I have backed up my data onto memory card but it seems that an addional fields that created in Contact such as note is not backed up. How do you make sure any additional field is secured and cou

  • Ora 12543 tns destination host not reachable

    Dear All, OS: RHEL 5 DB VERSION:-11.2.0 I am facing problem related to ora 12543 tns destination host not reachable The problem here is little bit different what exactly other face:- i have 2 servers with name abc.localdomain & xyz.localdomain. Db na

  • Foreign Currency Payment

    Could anyone explain this senario to me? One supplier in USA issued the bills in USD and we recorded the invoice in SAP in USD as well, later on we paid them off while from the outgoing module and choose the usd as currency and from my USD bank accou

  • Is there an equivalent of CSS technology in flash?

    Hi At the very outset let me apologize if my question is not in the right group here. Just like how one can use different CSS files to view the same text rendered differently in HTML. I would like to find how to do the same with Flash. My goal is to

  • Odd Word 2011 issue

    I have an odd issue with Office 2011.  At the beginning of sessions, I can tell Word, other office programs, or adobe to share email as attachment, and they will correctly open Outlook and open a new mail with the current word document, powerpoint or