Can't Connect to WiFi Windows XP Professional

OK. First of all, I've read through several pages of PPs people have posted with the same problem and I haven't found any resolutions as of yet.
I have a mac mini running OS 10.5.0 with Boot Camp and Windows XP Professional. I can connect to my WiFi perfectly through the Mac side. But when I boot into Windows, it won't connect to my wireless. It SEES the network. But the connection never makes a handshake. The connection window just disappears and I'm not connected. I tried pinging my IP JIC and everything is disconnected.
I've tried DLing the hotfixes and D-Link firmware updates as suggested in other threads and it's still not connecting. Another catch is that I just got my mini back from my friend who got all this working for me and he had no problem connecting to his WiFi through Windows. I don't know what else to try. Please help!
ETA: I know for a fact that he installed the Leopard drivers after installing Windows because he asked me to find my Leopard disc so he could do so
Message was edited by: FireCoral417

"my friend who got all this working for me and he had no problem connecting to his WiFi through Windows."
Well, that's an obvious indicator that it's not your hardware. Are you sure you've got everything set up properly on the Windows side? Since your system is able to see the connection point through your WiFi card, then that takes SSID broadcasting possibilities out of the picture. Perhaps if when on the Windows side you tell Windows to FORGET the connection that your friend used. You know what I mean? Once you connect somewhere, the WiFi card/software remembers the connection. Try that and see if it helps. Also make sure that you're typing in the correct NAME/PASSWORD for the LAN at your place. Sometimes also XP Pro' Firewall can get in the way, so I would check into that as well. Hope at least some of this is of help.

Similar Messages

  • Mac can't connect to wifi, windows can

    My iPad cannot stay connected to my home wifi network (Time Warner Cable using UBee modem/router). The iPad recognizes the wifi network, acquires an IP Address, connects for approx 5 min and then the the connection no longer loads webpages or loads any data. The iPad remains connected to the network with a strong signal but it cannot load pages. At the same time 2 other windows laptops connect to the network fine.
    I've restarted the device, the router, and checked the router settings to confirm that it has enough simultaneous CPEs from the DHCP server to connect and it is at 253.
    I'm skeptical that Time Warner is limiting the number of devices I can connect, but I am able to connect many windows devices without a problem.
    Any suggestions?

    SOLUTION!
    Hi there, had this problem recently and your post led me to investigate it even more and not ignore and finally managed to find a solution. and its a simple one believe it or not. Here's what you do:
    1) From your mac interface (while windows 8 is running), right click on the VMware Fusion icon and select the option Virtual Machine Library.
    2) A new window should show, showing you the windows 8 you are currently running and what is displayed there at the moment. Right click on the Windows 8 screen and select the option Settings.
    3) 3 rows of options will show, in the second row (named: Removable Devices), select Network Adapter.
    4) Now you should be able to see the source of which your Windows 8 takes interenet. Mine was taking internet by sharing with my mac. so the option "Share with My Mac" was ticked. I did change that to "Wi-Fi" by ticking that option from the list "Bridged Networking" just under "Share with my Mac".
    It would probably require administrative power to change that, insert your password and make sure the option Wi-Fi is ticked and then simply close the window.
    Go back and launch Windows 8, your internet should be working fine. Good luck.

  • I just bootcamp my macbook white to windows 7 home premium and I can't connect to wifi now! Plz help

    I used to run windows xp on my macbook with no problem.
    I just bootcamp to windows 7 and can't connect to wifi! T_T plz help...
    I can't see the wifi bar at the noti panel just the monitor with a red cross.
    Need help....

    Hee hee thank you for the reply! Just install the boot camp setup drivers... haha its working now thank you!

  • Help, just had my iphone 3 but can't connect to wifi put in the correct password but won't accept it, any ideas??

    Help, just had my iphone 3 but can't connect to wifi, i get as far as the password put in the correct password but it won't accept it, any ideas?? Thanks

    What type of encryption are you using with your wireless network -WEP or WPA?
    If your wireless router supports both which it should unless it is quite old and you are using WEP, try switching to WPA which is much more secure than WEP which is important if you have a Windows PC or any Windows based device connected to your network.
    In addition, when was the last time you checked Netgear's website to see if there is a firmware update available for your wireless router model that you haven't installed?

  • Got my ipad mini. It works perfectly fine until I updated to ios 6.0.2. Now I can't connect to wifi. I've tried every solutions offered in every forums and internet sites but nothing happened. Still ipad cannot connect to wifi. HELP!!!

    Got my ipad mini. It works perfectly fine until I updated to ios 6.0.2. Now I can't connect to wifi. I've tried every solutions offered in every forums and internet sites but nothing happened. Still ipad cannot connect to wifi. HELP!!!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • IPhone 4s and can't connect to wifi,wifi is grayed out and says "No wifi".FREEZER TRICK WORKS!

    I have iPhone 4s wchick cannot connect on wifi,wifi is grayes out and says"No wifi",i restart my phone,i reboot it and finally i restore it the problem remains,i put it on a freezer for more than 5 minutes and works for 1-2 minutes,but when outside temperature returns on the phone still can't connect on Wifi!what to do?
    Anyone having the same problem?My iPhone 4s its not 6 months old!

    Try restoring your phone usng DFU mode. Here are steps to get DFU Mode: Open iTunes on computer. Connect iPhone to computer. (some turn off iPhone here, I do not) Hold both home and power buttons for exactly 10 seconds, release power button, keep holding home button until iPhone recognizes iPhone in Recovery Mode. Usually takes 10-20 seconds of holding the home button. If the iPhone screen is black (blank) the iPhone is in DFU Mode.

  • How can I connect to a windows server from a mac book pro

    How can I connect to a windows server from a mac book pre?

    I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
    I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
    Any help is greatly appeciated.

  • Can't connect to wifi following upgrade to OS 2

    I've just upgraded my blackberry playbook to OS 2 and now I can't connect to wifi. Previously save connections are no longer present. Connection attempts don't go past 1st attempt of three.
    I've tried broadcasting the ssid and turning off the access control list.
    Any ideas on how to fix?
    Thanks,
    Solved!
    Go to Solution.

    pedrocadiz wrote:
    I've just upgraded my blackberry playbook to OS 2 and now I can't connect to wifi. Previously save connections are no longer present. Connection attempts don't go past 1st attempt of three.
    I've tried broadcasting the ssid and turning off the access control list.
    Any ideas on how to fix?
    Thanks,
    Could you please give spec like router make and model,  what security mode, what mode as far as being b/g/n
    Be a Shepard and not an iSheep.

  • My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

    My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't w

    I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't why rhapsody doesn't work anymore?

    Contact Rhapsody to see if they have or plan to release an update for the app. Try uninstalling and reinstalling the app. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

  • Can't connect to wifi in hotels in Ireland with iPhone 5

    Can't connect to wifi in hotels in Ireland with my iPhone 5. My iPad 3 works fine. When I enter the wifi password for the network I always get the error message "Incorrect password for XYZ". No problem with iPad 3.

    Returned home only to find the same situation with my home network. Much time on chat support with Apple. Short story long: Must have been corrupted software. Had to restore original original software then add back apps and music. Couldn't back up before doing the restore so I lost a bunch of pics, but at least the phone is working once again.

  • Can I connect to a windows server to veiw and download files to mark and return to server??

    Can I connect to a windows server to download and view files and return to server???

    I use the FTP on the Go Pro app to do just this. I don't know what kind of servers I connect to though but I've not had any problems connecting.
    I connect and select a file. I update the file, then tap save. The file is uploaded back to the server and the original version is ved just in case I might need it.

  • TS1398 my wifi button doesnt work. Can't connect to wifi.

    My wifi button doesn't work. Can't connect to wifi suddenly..

    yes, ive restarted it several times.. still doesnt work. ive also tried resetting network settings.. still didn't work.. ive just updated the software last week..

  • [Servlet Error]-[Can't connect to X11 window server using ':0.0&#39

    i m using repot engin to disply report its running in windows well in my local machine but whn i deployeed it to test server (AIX) it gave me this error server is websphere
    E SRVE0026E: [Servlet Error]-[Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.]: java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
         at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
         at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:175)
         at java.lang.Class.forName1(Native Method)
         at java.lang.Class.forName(Class.java(Compiled Code))
         at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:91)
         at java.awt.Font.initializeFont(Font.java:333)
         at java.awt.Font.<init>(Font.java:368)
         at com.actuate.ereport.engine.templateio.TmplReader.getFont(Unknown Source)
         at com.actuate.ereport.engine.templateio.TmplReader.getFont(Unknown Source)
         at com.actuate.ereport.engine.templateio.XMLTmplReader.handleFont(Unknown Source)
         at com.actuate.ereport.engine.templateio.XMLTmplReader.closeObjects(Unknown Source)
         at com.actuate.ereport.engine.templateio.XMLTmplReader.endElement(Unknown Source)
         at com.actuate.ereport.engine.templateio.XMLTmplReader.startParsing(Unknown Source)
         at com.actuate.ereport.engine.templateio.XMLTmplReader.readTemplate(Unknown Source)
         at com.actuate.ereport.engine.templateio.TmplReader.ReadTemplateFromBytes(Unknown Source)
         at com.actuate.ereport.engine.templateio.TmplReader.readTemplate(Unknown Source)
         at com.actuate.ereport.engine.ACJEngine.readTemplate(Unknown Source)
         at com.actuate.ereport.engine.ACJEngine.readTemplate(Unknown Source)
         at com.actuate.ereport.eapi.factory.DesignFactoryImpl.load(Unknown Source)
         at com.actuate.ereport.eapi.factory.DesignFactoryImpl.load(Unknown Source)
         at ccrmsweb.actions.PrintRpts.execute(PrintRpts.java:129)
    Please tell me wht exactly i have to do, i men exactly its very urgent

    Check this thread:
    Re: Can't connect to X11 window server using 'localhost:0.0'

  • Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.

    Hi,
    I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
    following error:
    java.rmi.RemoteException: java.lang.InternalError: Can't connect to
    X11 window server using ':0.0' as the value of the DISPLAY variable.
         at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
         at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:120)
         at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
         at java.awt.Font.initializeFont(Font.java:264)
         at java.awt.Font.(Font.java:298)
         at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
    caused by the following code fragment:
    Font f = new Font(fontName, fontStyle, fontHeight);
    FontMetrics fm = (new Panel()).getFontMetrics(f);
    Have I just forgotten to set an environment variable? I would prefer
    not to install bulky pieces of software, but if that's what it takes
    to get over this error, so be it.
    Thanks, Dave A.

    A Java AWT, X11 problem posted in the weblogic ejb newsgroup. I haven't been in here for long, but
    that has to be a first.
    If you have the DISPLAY env variable set to :0.0, you have to be at the console on a Solaris box
    running the XServer. 'xdm' I think is the code that has to be running. Also, I think the format is
    <hostname:0.0> or better <hostname:0> unless you are on a multi-headed workstation. Something like:
    export DISPLAY=hostname:0
    where hostname is the name of the host running an XServer and the .xhosts file allows access to the
    XServer from the display client.
    Apparently, you are not at the console?
    Anyway, I don't think there is a newsgroup here that I could even recommend to cross-post this to as
    it is not a WebLogic question. I think I would try the Discussion Forums at http://java.sun.com.
    Bill
    "D. Alvarado" wrote:
    Hi,
    I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
    following error:
    java.rmi.RemoteException: java.lang.InternalError: Can't connect to
    X11 window server using ':0.0' as the value of the DISPLAY variable.
    at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
    at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:120)
    at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
    at java.awt.Font.initializeFont(Font.java:264)
    at java.awt.Font.(Font.java:298)
    at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
    caused by the following code fragment:
    Font f = new Font(fontName, fontStyle, fontHeight);
    FontMetrics fm = (new Panel()).getFontMetrics(f);
    Have I just forgotten to set an environment variable? I would prefer
    not to install bulky pieces of software, but if that's what it takes
    to get over this error, so be it.
    Thanks, Dave A.

Maybe you are looking for