Can't connect to wireless network - was ok before... HELP!!!!

Somebody please help me!!
Normally, when my computer has been off and I turn it on, when i select the network I want to join it asks for a password and I have had no problems.
My computer crashed the other night and I rebooted it as usual. Now, when I try and select the network I want to join it tells me that "the password you have entered is incorrect". It doesnt even give me an option to enter a password.
Has anyone else had a problem like this/ know what it could be? I can't cope without the internet!!
Thanks guys!
Powerbook G3   Mac OS 9.2.x  

gem,
I'm a little weak on 9.x networking, so if nobody responds, please post your question on the MacOS 9 Forums.
http://discussions.apple.com/forum.jspa?forumID=669

Similar Messages

  • Can I connect to wireless networks far away?

    How do I connect to wireless networks further away?
    Is there a way I can improve my laptops wireless range so I can connect to wireless networks further away?

    Hi!
    You can only connect to wireless networks that the notebook recognizes. If the notebook recognizes a wireless network, you can connect to them. If it doesnt recognize (because it is further away) you can not connect.
    Furthermore you can not improve the wireless range from the laptop. You can do this on a WLAN router, not on the notebook.
    Bye

  • Upgrade ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1).

    I just upgraded my ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1). I bought the phone  online in Canada but have a Hong Kong simcard. Any solution to connect to network?

    I bought mine in the US and activated using a German SIM.  It worked fine first on 6.0.1.  After upgrading to 6.0.2 the SIM does not work.  I have reset the reset the phone and still does not work. I loaded a new SIM and the phone worked for few minutes before going to Searching mode after I restarted the device.  I am being told by the Genius Bar team that this is a Hardware failure.

  • Can't connect to wireless network with Apple Computers (WRT54G)

    Hi.
    I have had a password protected router (WRT54G) for over two years that any pc will connect to if I give them the password.  However, my roommate has an apple laptop and he can't connect, no matter how many times we try.  I just got an ipod touch, and it can't connect to the network either.  We are inputting our password correctly - why can't apple computers connect to my wireless network??
    Again, my router is a WRT54G.
    Thanks !!!
    Message Edited by Debo24 on 05-24-2009 06:41 PM

    Make sure you enter the correct password...To check your Wireless Settings follow this link
    If your Wireless Security is WEP then use WEP Key1 and not the Passphrase, make sure to enter a dollar sign on your Apple Computer when you attempt to connect...If your Wireless Security is WPA/WPA2 then use the WPA Shared key and no dollar sign is required...

  • Can not connect to wireless networks with ipad 2

    My ipad used to connect to the wireless net at home and in public areas.
    Now all by the sudden it can't "see"  the network.
    Message: " could not connect to wireless network"
    I have tried "everything" also on different networks,
    except resetting the modem.
    My iPhone works, as do all my other computers.
    Modem is Zyxel P2812

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Can't connect to wireless networks without disabling firewall.

    I just had the built-in battery replaced on my MBP by the genius bar. When I started the machine up I was bombarded with firewall messages asking if applications should be given access to incoming network connections. I didn't recognize a few of them and clicked "deny". Now my machine will no longer connect to a wireless network without first disabling the firewall. Then I can re-enable the firewall and it seems to work okay.
    I went through the Security panel and edited the list of applications allowed to have incoming connections and enabled all the ones that were disabled hoping that would fix it. The only one that is disabled now is OSXVNC, which I don't use and don't want to be enabled.
    I'm not sure why replacing the battery caused all the windows to pop up, but now I don't know how to fix this issue. Anyone have any advice? Is there a way to restore my old firewall settings?

    Go to the /Macintosh HD/Library/Preferences/ folder and remove the file called "com.apple.alf.plist", then restart your system.
    This file is the preferences file for the application firewall. Removing it will clear all the firewall rules and set up the firewall from scratch. Sometimes after hardware configuration changes, or even hard crashes the firewall may not work properly and removing this file to set it up from scratch should do the trick. It will still ask you to allow some services and applications after doing this, but should not ask to for every system service and feature that uses the network.

  • Can't connect to wireless network on bootup like before

    Hello all. Well, I seem to have run into some difficulties here while configuring my system. The thing is I cannot connect to my wireless network on bootup anymore. I stayed about 4 months without using Arch Linux, then  I decided to reinstall it from the ground up on the SAME machine, which has suffered NO changes; it is the exact same computer. The only change since then is that I changed my WEP encryption key on my router. I had a functional rc.conf file which I keep just for taking a look at while I'm configuring the system. The Networking section follows:
    # /etc/rc.conf  (NETWORKING Section)
    HOSTNAME="ArchPC"
    wlan0="dhcp"
    wlan_wlan0="wlan0 essid MySpot key 0123456789ABCDEFABCDEF1234"
    interfaces=(wlan0)
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    The only thing I changed from my previous rc.conf was my WEP hex key, which I have already triple-checked. I used the same hostname (which is also correctly configured in /etc/hosts) and the essid is the same. In 2 years of Arch I used this configuration file and it worked flawlessly, but now it simply does not work anymore for boot-up connection. I simply get a FAIL after about 30 sec in '::Starting Network' on bootup. Then, by issuing 'iwconfig', I can see that my interface (wlan0) is up and the ESSID is set to "MySpot", but the access point is not associated. I do not know what is going on, as it never happened before. However, it works just fine if I do the step-by-step manual configuration from command line after my system is up and I can get internet access in such a way without any problems.  Never did it before (so I do not know if this was the case for my previous installations), but by running 'lspci | grep -i net' I do not see my wireless extension listed, although 'iwconfig' shows it just fine. I am trying to make it work using rc.conf just as it did before. As I mentioned, my network connection is working, but not from bootup as it did before, so I do not know what to do. Did anything on Arch radically change since then? Couldn't find anything on the wiki pages besides using another network start method. Any help is greatly appreciated...
    Edit: I just found out that my wmaster0 is missing...could that have anything to do with my issue?
    Last edited by gabscic (2010-04-04 06:45:23)

    Just for the sake of not letting this go without any answer, I've just done a full system reinstall and now I've got back my wmaster0 (the driver module for my wireless network card is rtl8187). Searching the internet, it seems that wmaster0 is an internal master device that is to be used by the module, and not the user. The lack of wmaster0 may indicate that something is amiss on the driver installed on your system. Now that I've got it back, my rc.conf file (described on previous post) works like a charm. However, I remember I did have wmaster0 on my previous Arch installation and it just disappeared all of a sudden. So far the only thing I've done different is that I have not yet upgraded my new installation, so my guesses are that something on the upgrade procedure is breaking the driver in some way. Maybe all those package renames and such? I'll upgrade my system later (don't have the time now) and I'll get back here with any new findings. Regards...
    Last edited by gabscic (2010-04-06 20:53:14)

  • Can't connect to wireless network that works fine for other machines

    I received my MacBook Pro last week (2.16 GHz) and I've been very happy with it so far. However, when I brought it home, I've had nothing but issues trying to connect to my wireless network. It's a Netgear, and you can read more about it at the following link:
    http://www.netgear.com/products/details/WGT624.php
    It works great with my Windows XP Desktop (HP Pavilion 1250n) and PowerBook G4. It works with no password, 40-bit WEP and 128-bit WEP. But not with the MacBook Pro. However, my MacBook Pro has worked at my office and StarBucks, so it works sometimes. Is there something special I have to set on my router for it to work with the MacBook Pro?

    I also had problems with wireless connectivity while trying to access a netgear WGR614 albeit a v2 base station.
    The problem was that I could not see the network from my MBP. It just didn't appear. The network was open with zero security. However my dell laptop was able to connect fine.
    I noticed in the MBP config that the wireless locale was set to USA. I however live in Ireland. I then changed the locale inside the netgear 'wireless settings -> region' to United States. Now everything works fine. My dell didn't seem to care either way. It just picked up the new 'USA - region' based wireless network.
    The problem now is that I travel quite a lot and usually I won't have the luxury of being able to change the routers configuration.
    Is this just a MBP and Netgear WGR614 issue?
    If this happens in the future is there a way for me to change the AirPort wireless card locale?
    MBP 15" Core 2 Duo   Mac OS X (10.4.8)  

  • Can't connect to Wireless Network. Officejet 6500a

    I just bought an Officejet 6500A and can't seem to have it connect to my wireless network via Ethernet. All the cables are connected, however when I try to install using the network connection I keep gettting an error saying no networks are found.
    I have tried the HP Network Diagnostic Utility and even there after it scans it says no wireless networks found. What is the deal? The printout from the printer says it is ready and wired.

    Hi Romex,
    The HP Officejet 6500A Plus e-All-in-One (CN557A#B1H) is the only model that offers wireless capability.
    The HP Officejet 6500A e-All-in-One (CN555AB1H) only offers wired Ethernet capability.
    You can always exchange the product since you didn't know it was Ethernet only.
    Please click the blue Kudos star in the post that helped you.

  • Can not connect to wireless network any more, missing command

    I can not connect to any wireless network. I have been having this problem for days. In desperation I installed 10.4 in a seperate HD. I clicked on the airport icon in the upper tool bar, selected my network name and clicked on "open internet connect" and I was connected, what?? I rebooted into 10.5 and tried the same thing again. But the panel that opens when you click on the airport icon has NO "open internet connect" command. A couple of weeks ago I reinstalled my OS. I have run diskwarrior and Techtool pro. Thinking back to the time I first installed 10.5 I don't remember ever seeing that command. Is Leopard compatible with the airport card? How do I get my "open internet connect" command back??

    It sounds like a problem between hardware and software. When you select your network, does anything freeze or does nothing happen?
    Nothing happens.
    Try this, open your Network Preference Pane, turn off airport off and delete the Airport connection by selecting "Airport" in the left pane and click the " - " button. Click on the "+" sign and create a new Airport connection. Hit Apply if it is available. Turn AirPort on and try to select your network and login if you can. The status should show Connected and an IP address should show up after of a couple of seconds.
    I get "AirPort has a self-assigned IP address and may not be able to connect to the Internet". On a couple of occasions (over the last couple days) I got you are connected to the internet on IP 172.17.90.251. However when I tried to open a web page I got the banner you are not connected to the internet. Strange, the pref panet said I was the Safari said I was not. Certainly the IP address does not show up in a few seconds. I also have ComCast cable but I need to use the MetroFi-Free wireless so my wife has the bandwidth to do her company work using VPN.

  • Can't connect to wireless network but connects if I move it 1 meter

    Hi all,
    I've had my 27" iMac Intel Core 2 Duo for over 3 months now with no issues, but suddenly over the weekend I can no longer connect to my network.
    Sometimes I can see my network listed (but the signal is now very weak when it used to be very strong) and when I try to connect I get a "Connection Timeout" error. Othertimes I can't even see my network.
    If I move my whole mac about 1 meter "closer" to the router (it sits downstairs, my mac upstairs) it connects fine. But as soon as I put it back on my desk, where it has been sitting for the past 3 months, the connection drops out or it can't find the network. (I can't leave it "closer" to the router, as that would mean I'm sitting on the floor right in my room doorway...)
    All other PC's, laptops, my MacBook and iPhone all connect fine. In the MacBooks case, it connects fine in exactly the same spot as where my mac had been sitting for the past 3 months.
    I'm using a Belkin N150 wireless router which is supposed to have a range of 300m (my house is definitely not that big!) and using a WPA2 Personal password security setting. As I said above, no issue before this past weekend (same router, same settings).
    I have tried the following:
    - restarting router, modem, computer (in various orders) to no avail
    - deleting the system configuration folder, re-starting, etc.
    Just wondering if there's something I'm missing? Or whether or not it's to do with the wider issue of connecting that people seem to have? I thought it may be different since I can connect if it sits somewhere else...
    Any help wold be appreciated since my support has run out!
    Thanks in advance!
    Message was edited by: chuppachup

    Yeah I've tried moving it but unfortunately I'm a bit constrained as to how far I can move it (aprox 20cms each way). There are lots of ethernet cables plugged in and they all run behind what is, a very solid, very big desk/shelving thing.
    However, the position of the router hasn't changed in the past 3 months.
    I've also tried disconnecting the cordless phone which sits in the same room and moving any extra cables around the router to no avail. But none of these things are new either.

  • [S0LVED] Can't connect to wireless network...

    I'm unable to connect to my wireless network.  I'm on a Thinkpad T41p and I installed the ipw2100 firmware for my chipset.  The wifi indicator is blinking, assumingly indicating activity.
    When I try to use wifi-menu to connect to my network, it gives me a "failed to connect" error when I try to connect...But with netctl-auto enabled, it just tells me that my interface is controlled by netctl-auto and does nothing.  When I try to scan with "iw dev wlp2s2 scan | grep SSID", it shows...
    command failed: Operation not suppored (-95)
    When I run wpa_cli, I get the following messages over and over again...
    <3>CTRL-EVENT-SCAN-RESULTS
    <3>Trying to associate with e0:91:f5:dc:14:24 (SSID='MYSSIDE' freq=2452 MHz)
    <3>Association request to the driver failed
    <3>CTRL-EVENT-SCAN-RESULTS
    <3> Authentication with e0:91:f5:dc:14:24 timed out.
    <3>CTRL-EVENT-DISCONNECTED bssid=e0:91:f5:dc:14:24 reason=3 locally_generated=1
    I tried running netctl-auto switch-to on the profile, and all it showed was  "WPA association/authentication failed for interface 'wlp2s2'".
    As far as I can tell, nothing else is trying to manage my network, and I can't find anything that indicates that anything's wrong in dmesg.
    lspci -nnvk | grep -A10 -i net...
    02:01.0 Ethernet controller [0200]: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) [8086:101e] (rev 03)
    Subsystem: IBM Thinkpad [1014:0549]
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
    Memory at c0220000 (32-bit, non-prefetchable) [size=128K]
    Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
    I/O ports at 8000 [size=64]
    [virtual] Expansion ROM at c0240000 [disabled] [size=64K]
    Capabilities: [dc] Power Management version 2
    Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
    Kernel driver in use: e1000
    Kernel modules: e1000
    02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter [8086:1043] (rev 04)
    Subsystem: Intel Corporation Device [8086:2551]
    Flags: bus master, medium devsel, latency 64, IRQ 11
    Memory at c0214000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [dc] Power Management version 2
    Kernel driver in use: ipw2100
    Kernel modules: ipw2100
    ip link...
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: irda0: <NOARP> mtu 2048 qdisc noop state DOWN mode DEFAULT qlen 8
    link/irda 00:00:00:00 brd ff:ff:ff:ff
    3: enp2s1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
    link/ether 00:0d:60:5f:57:cf brd ff:ff:ff:ff:ff:ff
    4: wlp2s2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DORMANT qlen 1000
    link/ether 00:0c:f1:0c:c4:36 brd ff:ff:ff:ff:ff:ff
    ip addr...
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
    valid_lft forever preferred_lft forever
    2: irda0: <NOARP> mtu 2048 qdisc noop state DOWN qlen 8
    link/irda 00:00:00:00 brd ff:ff:ff:ff
    3: enp2s1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:0d:60:5f:57:cf brd ff:ff:ff:ff:ff:ff
    4: wlp2s2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:0c:f1:0c:c4:36 brd ff:ff:ff:ff:ff:ff
    dmesg | grep firmware usually shows nothing regarding the firmware, but sometimes it'll show the following until I restart...
    [ 325.258396] ipw2100: Fatal interrupt. Scheduling firmware restart.
    Last edited by rzrscm (2013-10-22 11:59:06)

    /dev/zero wrote:
    With more information, I can now say that I can't help you with everything - but I will respond to what I can.
    rzrscm wrote:
    When I try to scan with "iw dev wlp2s2 scan | grep SSID", it shows...
    command failed: Operation not suppored (-95)
    Did you run that command with sudo? When I try running it as a normal user I also get an error but it works if I sudoise it.
    rzrscm wrote:
    ip link...
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: irda0: <NOARP> mtu 2048 qdisc noop state DOWN mode DEFAULT qlen 8
    link/irda 00:00:00:00 brd ff:ff:ff:ff
    3: enp2s1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
    link/ether 00:0d:60:5f:57:cf brd ff:ff:ff:ff:ff:ff
    4: wlp2s2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DORMANT qlen 1000
    link/ether 00:0c:f1:0c:c4:36 brd ff:ff:ff:ff:ff:ff
    ip addr...
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
    valid_lft forever preferred_lft forever
    2: irda0: <NOARP> mtu 2048 qdisc noop state DOWN qlen 8
    link/irda 00:00:00:00 brd ff:ff:ff:ff
    3: enp2s1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:0d:60:5f:57:cf brd ff:ff:ff:ff:ff:ff
    4: wlp2s2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:0c:f1:0c:c4:36 brd ff:ff:ff:ff:ff:ff
    Both of those commands say that your wifi card is in a DOWN state. Try running
    sudo ip link set dev wlp2s2 up
    and try again to make a connection.
    I've tried this a bunch of times with no results...This time after I tried it, I checked dmesg and the fatal interrupt message was there...So I'm guessing this error is in response to that command.
    ipw2100: Fatal interrupt. Scheduling firmware restart.

  • Can't connect to wireless network with "conflicting" essid

    Hello,
    My wireless card works perfectly (actually I am using ndiswrapper, but anyway) on Arch and I can connect to my home wireless network. I use iwconfig to connect.
    In my office we have a wireless network. It's essid is "default" and it uses WEP. I can connect to it using Windows, but not using Arch. Im running the following commands:
    iwconfig wlan0 essid "default" key XXXXXXXXXX
    dhcpcd wlan0
    and it doesn't connect ("waiting for carrier..." and nothing happens)
    I guess the problem is that there is another network with the same essid - "default". I've tried to manually associate my card with my office network AP using iwconfig wlan0 ap XX:XX:XX:XX:XX, but it didn't work either.
    What should I do?

    What kind of Wireless card do you have and what does it say when you do a lspci? So for me, I know I have a Broadcom and the way I found it was to do:
    lspci | grep BCM4312 (or whatever wireless make/model you have)
    or
    lspci | grep "Network Controller"
    The second option should also get it for you. From there, you can check out this list to see if that might help you with drivers (but then again, you might have known this already so...).
    Hope this helps.
    Last edited by ruffedgz (2009-11-23 21:03:42)

  • Can't connect to wireless network from my e2000 router

    My network was working fine, then my router turned off spontaneously. The power wasn't lost, everything else in the power strip was still functioning. I got it working again but now I can't connect to the wifi network on any of my devices. I've tried using a Wii, an iPhone 5 and a Mac running OSX 10.7.5
    The wired connection works fine. I can see the network on my list, but when I try to access it it reads "Could not join 'network'. A connection timeout occoured." 
    Any ideas? Anyone else have this issue and fix it? Is it time to go out and buy a new router?

    Yes, reset is fine. I do believe firmware upgrade can fix a lot of things.
    I usually use 1, 3, 6, 9, 11 wireless channels for better wireless coverage.
    I use inssider software to determine the best wireless channel to use.
    I make sure to that cordless phones, microwave ovens and other wireless transmitters are at least 10 meters away from the router. I also updated my wireless devices as much as possible. I think that is the key to my stable network.

  • Can't connect to wireless network in Poland

    So I just recently moved to Poland for school. I have never had any problems connecting to the internet with my MacBook. At home, in the States, I have a wirless network and access it perfectly fine. On my flight to Poland, I was able to access the internet in each airport. My friend's house I stayed at for 2 weeks when I first arrived had a wireless network without a password and I was able to connect to it just fine. Now, I finally found a place, which has internet, but my Mac won't connect. My roommate has a PC and she was able to connect, so I thought maybe the network wasn't setup to work with Macs, but my friend came over and he has a newer Mac than I do (an aluminum one, less than a year old, I think with Leopard) and he was able to connect. The network requires a password--a series of lowercase letters mixed with numbers-- to join and I've checked and rechecked it for correctness a million times. I've tried everything. I'm so frustrated because for my schooling and to communicate with my family back home I have to have the internet. So this is what I was thinking...I need to purchase the 802.11n Enabler software. I have the 802.11 a/b/g and I think this might be the problem as to why I can't access the Internet. Somehow, I need to figure out how to access the Internet and download this to my computer. My Mac is pretty old in computer years. I've had it since October 2006. Hopefully, this will work. If not, does anyone have any other ideas as to what the problem could be? Thanks in advance!

    Ok, so I tried to download the 802.11n enabler and it says my computer does not meet the requirements. I'm not sure why. I have an Intel-based Mac and it does not already have the 802.11n enabler downloaded. Anyone have any recommendations as to what else it could be? I am working with the internet company called Neostrada.

Maybe you are looking for