Can't connect using SMB, but can with CIFS
I'm trying to connect to a windows share from my PB running tiger. I can connect fine in finder going 'Network/Workgroup/PC_Name/' but if I us the 'Go > connect to server' in finder I cannot.
I click go, connect to server and type "//192.168.0.3/My Documents/' it says cannot find sever. Same if is use the smb prefix.
When I get info on the share it says CIFS://WORKGROUP;MARK@PC_NAME/My Documents/
so I can't understand why I cant connect using SMB, I've checked directory access and SMB is enabled, workgroup is set. I know I've been able to connect via SMB before, not sure why I can't now?
For the longest time I have had an Alias of all my remote PC servers in the Dock. One click and I'm connected. As of 10.4.5 those Alias' no longer work. When I click on them instead of getting the volume mounted and ready, I get a the login window with the Workgroup and User Name asking for the password that should be in the Keychain. I enter the password and click connect and get nothing. No errors, no pings, just the Network icon in the Dock turns into a ?.
I go to the Network Browser and the servers show up in their proper workgroups. I click the server, get the login window, put in the password and get an error that the "Server" could not be opened, because the original item cannot be found. With three buttons "Delete Alias", Fix Alias", and "OK". If it can't be found, then what is it showing me in the browser?
I have 10.4.4 on another partition for emergency backup use in the event 10.4.5 fails (and it is). I went to 10.4.4 and all works just fine. All this started in 10.4.5.
G4 FW800 Mac OS X (10.4.5) Totally Stuffed/Max'd Out with lots of great toys.
Similar Messages
-
Can't connect using ethernet but can connect using Airport
The problem I am currently facing is when I try to plug an ethernet cable into my MacBook Pro I can't get on the internet. At home I use an AEBS and connect fien, but when I go over to a friends house and they don't have wireless I try to hook up using the ethernet cable directly from the modem to connect and I can't.
I open System Pref and it says on the left side under ethernet "Self Assigned IP" On the right hand side it says ethernet is connected and underneath that it says, "ethernet has self assigned IP address and may not be able to connect."
I though this was a problem at his house and when I went home I tried it and I get the same thing. I used to have a Powerbook using Tiger and it did the same thing. Once I turn my Aiprort back on and plug the ethernet cable back into my AEBS I get on line.
Am I doing something wrong? I figured if I just plug in an ethernet cable it should detect it and work.
ThanksI am not sure if this is your problem, but I believe a lot of cable modems need to be power cycled if you switch the device that is connected to them. They only recognize the MAC address of the first device that connects to them after they have been power cycled.
Although this was a couple of years ago, I was trying to investigate something (I can't remember what now) and I unplugged my router from my cable modem and plugged one of my computers directly to it. I found I couldn't do anything on the Internet. Later, when I was looking at the Comcast forums, I found the information about needing to power cycle the modem to get it to accept the "new" device. -
Macbook can't connect via L2TP but can via PPTP. iPhone can connect to both
So I've been banging my head up against the wall for the better part of this morning trying to figure this out. Just as a note, I'm 3000 miles from my house and server, but I do have access to it for the time being via PPTP.
Before I left, I verified that I could connect with L2TP on my iphone's 3G network. I was also able to connect at the airport on my Macbook using L2TP. Sometime overnight something changed, and I can't figure out what. I noticed that my phone dropped it's VPN connection saying something like "the connection to the server dropped unexpectedly" or such. After that, I was unable to connect over L2TP on my macbook or iphone. On a whim I tried connecting over PPTP which worked! But only on my macbook. Again on a whim I tried to connect via L2TP on my iphone, and it worked?! I rinsed, lathered and repeated that process over and over again and confirmed that I could only connect over L2TP on my iPhone after connecting on my macbook over PPTP. Also, on my iphone, if I stored the password it wouldn't authenticate (probably not related).
As of this moment I am connected using L2TP on my iphone for the last hour, using it to successfully stream Pandora across US borders, but can't sustain a PPTP connection on my macbook for longer than 10 mins. And I still can't connect over L2TP. So that said here are the client and server logs (ips, domains and usernames masked....) Server and clients are in different timezones:
*Macbook when trying to connect via L2TP:*
Mon Dec 21 12:30:32 2009 : L2TP connecting to server 'nnn.nnn.nnn' (xxx.xxx.xxx.xxx)...
Mon Dec 21 12:30:32 2009 : IPSec connection started
Mon Dec 21 12:30:32 2009 : IPSec phase 1 client started
Mon Dec 21 12:30:42 2009 : IPSec connection failed
*Server Log for the above transaction:*
NO RECORD
*Macbook when trying to connect via PPTP:*
Mon Dec 21 12:49:44 2009 : PPTP connecting to server 'nnn.nnn.nnn' (xxx.xxx.xxx.xxx)...
Mon Dec 21 12:49:44 2009 : PPTP connection established.
Mon Dec 21 12:49:45 2009 : Using interface ppp0
Mon Dec 21 12:49:45 2009 : Connect: ppp0 <--> socket[34:17]
Mon Dec 21 12:49:48 2009 : MPPE 128-bit stateless compression enabled
Mon Dec 21 12:49:49 2009 : route_interface: write routing socket failed, File exists. (address xxx.xxx.xxx.0, mask 255.255.255.0, interface ppp0, host 0).
Mon Dec 21 12:49:49 2009 : local IP address xxx.xxx.xxx.233
Mon Dec 21 12:49:49 2009 : remote IP address xxx.xxx.xxx.109
Mon Dec 21 12:49:49 2009 : primary DNS address xxx.xxx.xxx.109
Mon Dec 21 12:49:49 2009 : secondary DNS address xxx.xxx.xxx.109
Mon Dec 21 12:49:49 2009 : pptpwaitinput: Address added. previous interface setting (name: en1, address: xxx.xxx.xxx.6), current interface setting (name: ppp0, family: PPP, address: xxx.xxx.xxx.233, subnet: 255.255.255.0, destination: xxx.xxx.xxx.109).
*Server Log for the above transaction:*
2009-12-21 09:49:44 PST Incoming call... Address given to client = xxx.xxx.xxx.233
Mon Dec 21 09:49:44 2009 : Directory Services Authentication plugin initialized
Mon Dec 21 09:49:44 2009 : Directory Services Authorization plugin initialized
Mon Dec 21 09:49:44 2009 : PPTP incoming call in progress from 'xxx.xxx.xxx.xxx'…
Mon Dec 21 09:49:44 2009 : PPTP connection established.
Mon Dec 21 09:49:44 2009 : using link 1
Mon Dec 21 09:49:44 2009 : Using interface ppp1
Mon Dec 21 09:49:44 2009 : Connect: ppp1 <--> socket[34:17]
Mon Dec 21 09:49:44 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x206a2bb5> <pcomp> <accomp>]
Mon Dec 21 09:49:45 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4b8d229c> <pcomp> <accomp>]
Mon Dec 21 09:49:45 2009 : lcp_reqci: returning CONFACK.
Mon Dec 21 09:49:45 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4b8d229c> <pcomp> <accomp>]
Mon Dec 21 09:49:47 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x206a2bb5> <pcomp> <accomp>]
Mon Dec 21 09:49:48 2009 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x206a2bb5> <pcomp> <accomp>]
Mon Dec 21 09:49:48 2009 : sent [LCP EchoReq id=0x0 magic=0x206a2bb5]
Mon Dec 21 09:49:48 2009 : sent [CHAP Challenge id=0x7f <3b77645a35056d6f176a3d4302524136>, name = "OSXServer.kimnet"]
Mon Dec 21 09:49:48 2009 : rcvd [LCP EchoReq id=0x0 magic=0x4b8d229c]
Mon Dec 21 09:49:48 2009 : sent [LCP EchoRep id=0x0 magic=0x206a2bb5]
Mon Dec 21 09:49:48 2009 : rcvd [LCP EchoRep id=0x0 magic=0x4b8d229c]
Mon Dec 21 09:49:48 2009 : rcvd [CHAP Response id=0x7f <51f69894a74fc550cf12b270ceb43da90000000000000000d7a8e304c6080e5d0315a47e9783a4 8ce2ae8fdb00671adc00>, name = "nnnnnnnn"]
Mon Dec 21 09:49:48 2009 : sent [CHAP Success id=0x7f "S=09A448E00B717E032D200EAEFA793E57AF9B9676 M=Access granted"]
Mon Dec 21 09:49:48 2009 : CHAP peer authentication succeeded for nnnnnnnn
Mon Dec 21 09:49:48 2009 : DSAccessControl plugin: User 'nnnnnnnn' authorized for access
Mon Dec 21 09:49:48 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : rcvd [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : MPPE 128-bit stateless compression enabled
Mon Dec 21 09:49:48 2009 : sent [IPCP ConfReq id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:49:48 2009 : sent [ACSCP ConfReq id=0x1]
Mon Dec 21 09:49:49 2009 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Mon Dec 21 09:49:49 2009 : ipcp: returning Configure-NAK
Mon Dec 21 09:49:49 2009 : sent [IPCP ConfNak id=0x1 <addr xxx.xxx.xxx.233> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::0217:f2ff:fec8:ef86>]
Mon Dec 21 09:49:49 2009 : Unsupported protocol 0x8057 received
Mon Dec 21 09:49:49 2009 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 17 f2 ff fe c8 ef 86]
Mon Dec 21 09:49:49 2009 : rcvd [IPCP ConfAck id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 04]
Mon Dec 21 09:49:49 2009 : rcvd [IPCP ConfReq id=0x2 <addr xxx.xxx.xxx.233> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : ipcp: returning Configure-ACK
Mon Dec 21 09:49:49 2009 : sent [IPCP ConfAck id=0x2 <addr xxx.xxx.xxx.233> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : ipcp: up
Mon Dec 21 09:49:49 2009 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp1, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.233).
Mon Dec 21 09:49:49 2009 : found interface en0 for proxy arp
Mon Dec 21 09:49:49 2009 : local IP address xxx.xxx.xxx.109
Mon Dec 21 09:49:49 2009 : remote IP address xxx.xxx.xxx.233
Mon Dec 21 09:49:49 2009 : pptpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp1, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.233).
Mon Dec 21 09:49:49 2009 : rcvd [IP data <src addr xxx.xxx.xxx.233> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
Mon Dec 21 09:49:49 2009 : sent [IP data <src addr xxx.xxx.xxx.109> <dst addr xxx.xxx.xxx.233> <BOOTP Reply> <type ACK> <server id 0xc0a8016d> <domain name "nnn.nnn.nnn">]
*Server Log for iPhone L2TP login:*
2009-12-21 09:52:38 PST Incoming call... Address given to client = xxx.xxx.xxx.202
Mon Dec 21 09:52:38 2009 : Directory Services Authentication plugin initialized
Mon Dec 21 09:52:38 2009 : Directory Services Authorization plugin initialized
Mon Dec 21 09:52:38 2009 : L2TP incoming call in progress from 'xxx.xxx.xxx.xxx'...
Mon Dec 21 09:52:38 2009 : L2TP received SCCRQ
Mon Dec 21 09:52:38 2009 : L2TP sent SCCRP
Mon Dec 21 09:52:38 2009 : L2TP received SCCCN
Mon Dec 21 09:52:38 2009 : L2TP received ICRQ
Mon Dec 21 09:52:38 2009 : L2TP sent ICRP
Mon Dec 21 09:52:38 2009 : L2TP received ICCN
Mon Dec 21 09:52:38 2009 : L2TP connection established.
Mon Dec 21 09:52:38 2009 : using link 0
Mon Dec 21 09:52:38 2009 : Using interface ppp0
Mon Dec 21 09:52:38 2009 : Connect: ppp0 <--> socket[34:18]
Mon Dec 21 09:52:38 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x6b3541df> <pcomp> <accomp>]
Mon Dec 21 09:52:38 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x24ff54dc> <pcomp> <accomp>]
Mon Dec 21 09:52:38 2009 : lcp_reqci: returning CONFACK.
Mon Dec 21 09:52:38 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x24ff54dc> <pcomp> <accomp>]
Mon Dec 21 09:52:39 2009 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x6b3541df> <pcomp> <accomp>]
Mon Dec 21 09:52:39 2009 : sent [LCP EchoReq id=0x0 magic=0x6b3541df]
Mon Dec 21 09:52:39 2009 : sent [CHAP Challenge id=0x6d <4322331b3d22406914173d5e0d176c29>, name = "nnn.nnn.nnn"]
Mon Dec 21 09:52:39 2009 : rcvd [LCP EchoReq id=0x0 magic=0x24ff54dc]
Mon Dec 21 09:52:39 2009 : sent [LCP EchoRep id=0x0 magic=0x6b3541df]
Mon Dec 21 09:52:39 2009 : rcvd [LCP EchoRep id=0x0 magic=0x24ff54dc]
Mon Dec 21 09:52:39 2009 : rcvd [CHAP Response id=0x6d <f46ecd855c624eef611f02096c87d7650000000000000000f7430743bc328cbca68540408d0103 2e0a60fb95fcc2b83600>, name = "xxxxxxx"]
Mon Dec 21 09:52:39 2009 : sent [CHAP Success id=0x6d "S=0A046B9F1C59085076A8F2B736929E19391BDC4B M=Access granted"]
Mon Dec 21 09:52:39 2009 : CHAP peer authentication succeeded for xxxxxxx
Mon Dec 21 09:52:39 2009 : DSAccessControl plugin: User 'xxxxxx' authorized for access
Mon Dec 21 09:52:39 2009 : sent [IPCP ConfReq id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:52:39 2009 : sent [ACSCP ConfReq id=0x1]
Mon Dec 21 09:52:40 2009 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Mon Dec 21 09:52:40 2009 : ipcp: returning Configure-NAK
Mon Dec 21 09:52:40 2009 : sent [IPCP ConfNak id=0x1 <addr xxx.xxx.xxx.202> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::8948:cf2a:8334:7077>]
Mon Dec 21 09:52:40 2009 : Unsupported protocol 0x8057 received
Mon Dec 21 09:52:40 2009 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 89 48 cf 2a 83 34 70 77]
Mon Dec 21 09:52:40 2009 : rcvd [IPCP ConfAck id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 04]
Mon Dec 21 09:52:40 2009 : rcvd [IPCP ConfReq id=0x2 <addr xxx.xxx.xxx.202> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : ipcp: returning Configure-ACK
Mon Dec 21 09:52:40 2009 : sent [IPCP ConfAck id=0x2 <addr xxx.xxx.xxx.202> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : ipcp: up
Mon Dec 21 09:52:40 2009 : pptpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp0, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.202).
Mon Dec 21 09:52:40 2009 : found interface en0 for proxy arp
Mon Dec 21 09:52:40 2009 : local IP address xxx.xxx.xxx.109
Mon Dec 21 09:52:40 2009 : remote IP address xxx.xxx.xxx.202
Mon Dec 21 09:52:40 2009 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp0, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.202).I'm having similar issues but not much luck getting any answers. I made a similar post here - maybe something in there will help you.
One thing I have been able to pinpoint is that the MobileMe Back To My Mac service was causing quite a few issues with being able to connect to the VPN. Once I turn off the service, connection seems to work fine. Although, once I'm connected, I cannot access file sharing. Still waiting for some answers on that. -
After 7.1.1 installed, can't connect to Verizon but can on my iMac. Is macmail defective?
there are no problems with the ISP, Yahoo , gmail & icloud mail are sent and received on the ipad.
Any suggestions?iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say “Cannot Connect to Server”?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
Gmail Account Will Not Connect to Gmail Server
http://support.apple.com/kb/ts3058
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
Importing a Contact List CSV to the iPad
http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
How to delete an email account on your iPad
http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
Cheers, Tom -
Can't connect via Finder but works with everything else
The Time Capsule is working fine with Time Machine and Airport. However when I try to connect via Finder, it just says 'Connecting...' and never changes. When I hit 'Connect As...', nothing happens. I have rebooted the TC and deleted all passwords from the keychain but that didnt help. Latest OSX updates and firmware update installed.
I powered down and was relieved to hear the fan jolt and the drive spin so that looks good.
Wireless is currently the only method I've been using to connect to the TC with my macbook because as of right now I dont have a USB->ethernet adapter but I will pick one up later today to see if that changes anything. The cable modem is connected via ethernet though and that seems to be working fine.
The LED is solid green when the modem is plugged in and flashing orange when it is not.
Here is the log after a power cycle, at first I did not have the cable modem plugged in and attempted to access via Finder with no luck. Then shortly after, I plugged in the cable modem and tried Finder again. Its interesting that attempting to access the drive via Finder does not create any activity in the log.
I will try to cool down overnight and hope I can get at the data. At this point, my main goal is to retrieve the files. And then get a new local backup solution asap. I am currently doing a full online backup to Crashplan but with 500GBs, its going to be weeks before it finishes uploading.
Jul 13 05:47:42
Severity:5
Initialized (firmware 7.5.2).
Jul 13 05:47:54
Severity:5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jul 13 05:47:54
Severity:5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
Jul 13 05:47:54
Severity:5
Rotated CCMP group key.
Jul 13 05:48:12
Severity:5
Associated with station 14:10:9f:d5:8e:bb
Jul 13 05:48:12
Severity:5
Installed unicast CCMP key for supplicant 14:10:9f:d5:8e:bb
Jul 13 05:48:13
Severity:5
Binding added for udp, 0.0.0.0:32769 to 10.0.1.3:5353 with lifetime 7200
Jul 13 05:48:23
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50904.
Jul 13 05:48:26
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50905.
Jul 13 05:48:42
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50906.
Jul 13 05:48:44
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50907.
Jul 13 05:48:44
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50908.
Jul 13 05:49:36
Severity:5
(WAN) link state is Up.
Jul 13 05:49:36
Severity:5
Internet configuration leased [IPv4] -- host <69.204.228.249/255.255.254.0> gateway <69.204.228.1> dns <209.18.47.61 209.18.47.62> wins <> lease <43200> domain <nyc.rr.com>
Jul 13 05:49:36
Severity:5
Binding added for udp, 69.204.228.249:32769 to 10.0.1.3:5353 with lifetime 7200
Jul 13 05:49:38
Severity:5
Internet configuration leased [IPv6] -- host <2604:2000:ffc0:27:5c41:d64:1455:8715> dns <> delegated <>
Jul 13 05:49:38
Severity:5
Internet configuration leased [IPv6] -- host <> dns <> delegated <2604:2000:1009:c07c::/64>
Jul 13 05:49:38
Severity:5
IPv6 route advertised [flags=ADDRESS DNS=NONE]
Jul 13 05:49:39
Severity:5
Clock synchronized to network time server time.apple.com (adjusted +6 seconds).
Jul 13 05:49:42
Severity:5
Binding added for udp, 69.204.228.249:32769 to 10.0.1.3:5353 with lifetime 7200
Jul 13 05:49:51
Severity:5
Internet configuration leased [IPv4] -- host <69.204.228.249/255.255.254.0> gateway <69.204.228.1> dns <209.18.47.61 209.18.47.62> wins <> lease <43186> domain <nyc.rr.com>
Jul 13 05:49:51
Severity:5
Binding added for udp, 69.204.228.249:32769 to 10.0.1.3:5353 with lifetime 7200 -
HT5622 I can't login using iPhone, but can on my computer
I reset my appleID on my iPhone, but the password will not be accepted in the App store. But the same password can be used in to sign in to Apple on my computer. Why is that? I currently can't download any apps on my iPhone because it keeps saying my password is incorrect. I have tried resetting it and that still doesn't help. Any ideas?
Go to settings/iTunes & App Store and tap on ID there and log out then log in using the new password
-
Can't connect to server but can hear mail downloading
Having just travelled abroad, I switched off my main mail account in Settings > Mail, Contacts and Calendars.
When I returned, I switched the account back on, expecting Mail to simply download recent mail. However, I received an error message saying that 'the server cannot be found, the username and password is incorrect...' although I can hear mail downloading in the background.
I really want to avoid deleting the account and keying in the settings again. Any help gratefully accepted!
Many thanks,
Colin.Solved - turned off Data Roaming in Settings > Network
-
Can't Connect to OS X Server 10.6.4 using AFP - but can via SMB
OK, I'm stumped. This is a brand new Mini server running OS X Server 10.6.4. I can connect from 10.5 and 10.6 clients using SMB but not AFP. Access to all services is set to 'Allowed' so it's not a service restriction.
Server has good DNS resolution for itself. This happened using OD and then I demoted it to Standalone to see if that would make any difference. None. Rebooted several times.
The AFP logs show this when a user tries to connect:
IP 192.168.111.4 - - [29/Jul/2010:22:24:28 -0500] "Login adam" 0 0 0
IP 192.168.111.4 - - [29/Jul/2010:22:24:30 -0500] "Logout adam" 0 0 0
But on the client side you get a dialog "There was an error connecting to the server. Check your connections and try again."
Possibly related to this, not all folders show up in the share when connected via SMB. All folders are there when viewed on the server though. Have forced share permissions down the tree several times. Reboots. Nada.
Thoughts? Never seen this happen before in many years of OS X Server work.I have exactly the same issue --
Have an Xserve running 10.6.4
File Sharing is setup.
Can access files using SMB but not AFP --from Mac OS X 10.5.8
Can access perfectly from Windows 7. -
Lion can not connect to smb if use root login
I found if use root account login lion, that can't connect to smb but use other account ok.who can help me take a look?
This might help. I have a Seagate Dockstar (Pogoplug w/samba) with attached drives connected to my network that was easily discoverable with Bonjour in Snow.
From my experience -
I got the SMB share working (sort of) in Lion 10.7
While the network hub and connected drive(s) won't automatically appear as a Connected Server, or Bonjour Computer I was able to find the Dockstar by going to -
Go/Connect to Server and then enter it's specific info - smb://fabx2d09fe (my device's actual number was different than this).
The dialog pops up for name and password - or connect as Guest. I couldn't remember if I had set these so tried Guest and was able to access/mount the drive on the desktop and sucessfully read/write to/from it.
I may have to always connect to recent servers to get the thing to mount so it's not as automatic as Bonjour in the sidebar - but it does work!
This mostly solved the issue for my needs....maybe it would work for yours? -
Can't connect my new iPhone 4 with internet via Time Capsule. IP4 recognized TC but will not connect with it. (Password etc. is ok)
Do the usual wireless things.
Change the wireless name to simple name with only alphanumerics and no spaces.
Set to manual and use channels 1, 6, 11 in turn.
For testing take off the security altogether.
The iphone only works on 2.4ghz so only that band is relevant. -
When I instaled new verson my Iphone4 stoped, in the sight shows the Itunes symbol. I tried to connect to Itunes, but can't repair. MISTAKE 3004. What can I do? I'm brasilian and don't speak english very well... Please, help me. Use my e-mail. Junara
<Personal Information Edited by Host>Hello Junara1969,
Thank you for contacting Apple Support Communirties. I have a couple of articles for you to take a look at to troubleshoot your issue.
I would start with basic troubleshooting
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
If you are still having the same issue, then there are further steps for this specific error code here:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Regards,
Jeff D. -
How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA inputWelcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC.. -
how can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?
https://www.youtube.com/watch?v=72l_FLsXNAg
I use Hercules found here http://www.hercules.com/us/Sound-Cards/bdd/p/123/gamesurround-muse-xl-pocket-lt3 /
also read this helpful thread Outputting 5.1 Channel Surround Sound from your Mac -
I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.
Hi mshields1162,
Great question, and welcome to Apple Support Communities.
First, you may want to choose to have the sidebar displayed for familiarity:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
iTunes 10: Sync to your iPod
http://support.apple.com/kb/VI72
Thanks,
Matt M. -
I can't connect to the iTunes store with my Apple TV. I can see what movies are on offer but when trying to access my account i am advised "Can't connect to server" (times out).
I have the same problem with my 3rd gen Apple TV. I can preview iTunes movies, stream from my Mac, Airplay from my other devices but I cannot rent a movie on iTunes. Every time I try I get "Can't connect to ITunes" and "Unable to sign in". Had technical support review the problem over the phone and they agreed to send me a new one. Same problem. Interestingly enough my 2nd gen Apple TV works just fine.
Maybe you are looking for
-
I have just bought an Ipad and Apple TV and am wanting to have a Keynote presentation playing through the TV from the Ipad, but be able to open other applications on the Ipad without them also being mirrored and interrupting the presentation. I know
-
Photocasts no longer "casting" in iPhoto 08
Have some "old" photocasts that I use to update the screen savers on my Mum's, Dad's and Mother in Law's computers (yes they all have to be different - you don't wanna know). With the upgrade to 08 they no longer seem to be updating when I add photos
-
When I sync my Iphone4 with outlook, the calander is not sync
When I sync my Iphone4 with outlook, the calander is not sync (contact & and notes sync OK .I marked the calander to sync. I reinstalled Itunes and reset the Iphone)
-
While customizing accounts, the user found that certain document numbers are not appearing or are missing. For example, number range 17 is assigned to document type KA, which has the range 1700000000 - 1799999999 valid up to 9999. The current status
-
How do I add an icon to the desktop. For example, Ebay.