Can't connect via aiport after using AOL connect w/modem

When we went to visit family over the holidays, we had to connect to the internet via AOL connect. But now that we're back home, I can't get my husband's iBook G4 to connect to our wireless network. When I look at the network status, it says that AirPort is connected, but has a self-assigned IP address & may not be able to connect.
I have restarted my Airport Extreme base and cable modem several times. I am not having this problem on my MacBook Pro (which used an external modem, btw). I have tried deleting my internet preferences, but that hasn't helped.
I can't find a way to delete the IP address. Is that in the iBook's settings, or the Airport base settings?

Try this on the iBook ...
o System Preferences > Network > Show > Network Port Configurations
o Note the order of the ports that are listed.
o If it is not already, verify that AirPort is checked and that it is at the top of the list.

Similar Messages

TS2771 Ipods no longer connect via USB after using a USB 3.0 for the first time

After trying to connect my Ipod Nano (2nd gen) and Ipod touch to my new computer that has USB 3.0 they both will no longer connect to anything via USB (ipod docks). Is this problem fixable? They still play music via the heaphones.

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem

Mac is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable?

Macbook Pro is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable. 2010 Macbook Pro, just purchased Mini DisplayPort to HDMI Adapter Cable from Amazon. Link here: http://www.amazon.com/Mini_Dis-HDMI-CB6-Mini-DisplayPort-Adapter-Cable/dp/B003OC 6LWM/ref=sr_1_2?ie=UTF8&qid=1406238976&sr=8-2&keywords=mac+to+tv --When i connect both ends of the cable to the TV and to the laptop, the screen will blink, but then afterwards it will not mirror on the TV. I have tried going to display setting but cannot find the arrangements tab. When i searched "arrangements" a message said, "The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer." Not sure how to fix this problem. I have connected this laptop to a TV before, but with a different cable other than the one i just purchased. Any help would be greatly appreciated, thanks.

Found the fix. Still don't know if it was Windows, iTunes, or Norton 360, but this worked immediately for me:
+++++++++++++++++
edgravel
Re: iTunes Store Won't Load, Won't Show Error Message
Aug 13, 2011 4:32 PM (in response to Daedalme)
I found a solution posted from Rodfromnework for PC users. It worked for me and easy to do.
Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
then type in:
Netsh winsock reset
Hit enter, restart PC, open iTunes, go to Store
Hope it works for you too.

Macbook pro keeps saying connection timeout, and it used to connect to the internet fine. what's up, why can't it find and automatically connect to the internet anymore???

Macbook Pro keeps saying connection timeout and it used to connect to the internet fine. What's up, why can't it find and automatically connect to the internet anymore???

Like this: https://discussions.apple.com/thread/2775868?tstart=0 ?

Facetime "Fails" to connect via Airport Extreme using Comcast?

Greetings,
First time poster... tried researchings specifics on my situation and couldn't find anything so posting here to see if a solution has been found.
I used to have Verizon DSL for ISP with Airport Extreme as my wireless router. Everything worked including Facetime (only issue was the need for speed). Switched to Comcast as ISP which uses cable and had the Tech reconnect it to the Airport Extreme to behave as the wireless router. Internet is on and good... got a green light on the Airport Extreme. However, when attempting to connect via any device using Facetime (it will ring but as soon as it is answered I get "Fail" message and it ends) be it my laptop, desktop or either of our iphones I have IOS7 and IOS6 respectively same error. Did not make any modifications to Airport settings or any of my devices.
When checking the common response to this issue was a potential "Blocked Port" situation... but by digging a little deeper it appears that Comcast does not block ports that are relevant to Facetime (please confirm). I didn't see anything else that would suggest a solution at this point.
Help would be greatly appreciated as we enjoy using facetime to have our 6 month old daughter connect to our grandparents.
Thanks,
Andrew

The USB port on an AirPort Base Station other than the 802.11n model is only for use with an USB printer; hard and flash drives will not be recognized. The compatible base stations include version 5.0 of the AirPort software on a CD.
(27846)

Buffering video downlowds via Quicktime, when using a HSDPA USB modem.

Hi,
Does any one else experience very poor streaming performance via Quicktime, when using a HSDPA USB modem. Every time, when using the Quicktime player and receiving data via a HSDPA USB modem, there seems to be minimal buffering of that data, so that the video quality is extremely pixelated and virtually unwatchable; are there settings that can be altered to correct this problem? This issue seems to be so petty, yet Apple is unable to offer a solution? That doesn't seem right?
Regards,
mike_biz

Is this a file that Quicktime PRO is not able to open?
Yes. Your camera's native video format is MPEG-4 and appears to possibly be "muxed" with MP3 audio.
If not, is there anyway that I can convert this file to one that I can use on my Mac?
Try installing the free Flip4Mac component. Then try playing the .asf file in the QT Player.
Is it possible to upload from my camcorder via the included USB cable and convert directly through Quicktime PRO?
If your file plays using the Flip4Mac player component, you may then wish to consider purchasing full conversion codec which will allow you to export your DXG-305V files to any frame-to-frame synchronized QT compatible format in QTPro.
ADDED: Sorry about the duplication, too slow with my response.

I'm having trouble with back to my MAC. I had everything working on my home wifi network but now I am at my daughter's house and trying to connect via a verizon hotspot wifi connection. I'm wondering if the Verizon hookup is a problem.

I'm having trouble with back to my MAC. I had everything working on my home wifi network but now I am at my daughter's house and trying to connect via a verizon hotspot wifi connection. I'm wondering if the Verizon hookup is a problem.

I finally figured it out. Needed to update her Airport firmware and allow guest access, and also changed Sharing preferences to Allow Access for All Users.

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. Amy I just out of luck?

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. The drive does not show on my monitor. Any suggestions or my I just out of luck?

Do you have Finder Preferences set to show other disks? Nothing wil show on the Desltop until you make that change:

Can I share my internet connection via wifi AND use my wireless printer at the same time?

Not completely familiar with wifi capabilities. I have this new setup in my office. I want to share my iMac internet connection via wifi so I can text and check emails using my iPhone (no cell service inside the building). Which works fine. However, I now cannot print wirelessly to my HP printer (LaserJet Pro 400 color). Once Internet sharing is off, I can print just fine. Any other wireless options, or just go get a long USB cable?

Hi,
It is not a multitasking printer, other devices may keep it therefore the best option in this case: connect it to your wireless router and all devices which are conntected to this router can sahre the printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can't connect via ethernet after iBook wakes up from sleep

I'm running 10.4.0 on a 1.33 GHz G4 iBook. Since buying the computer in 2005, I've been connecting to the internet in various locations via AirPort, though I have hooked my iBook up to ethernet connections in the past and had no problems.
Recently I moved to a university where I must connect via ethernet, as the wireless network doesn't extend to the areas where I do most of my work. I bought a new cable. Much of the time, my connection is fine. But frequently I am unable to connect to the internet at all via ethernet, and I've noticed that it's always after I've woken the computer up from sleep. I've tried various ridiculous "kick the car and maybe it will start" techniques like unplugging the cable at both ends and waiting, restarting five or six times in a row, etc., and it starts connecting eventually, but I have NO idea why or why not. When I check my network preferences, I get the message "Built-in Ethernet is currently active and has the IP address [xxx.xxx.x.xxx]. You are connected to the Internet via Built-In Ethernet." But I'm not. What's going on here?

Sorry, meant to indicate an IP address without giving the exact numbers, and it came up as an HTTP address. My network connections system preference panel indicates a normal IP address. (And it's not self-assigned.)

L7680 Can't connect via Network works fine direct connected via USB Please Help!

Greetings All,
I have an HP L7680 that has been having this same problem since I purchased it and the only cure that has ever worked is to completley reload Windows XP and start over which I am very tired of reloading XP to resolve a printer problem.
This has been posted by several other people but I don't see where anyone has posted a fix.
When I first install the printer everything usualy works fine and it runs fine for a few mionths. Then the first indicatrion of a problem is the scanner quits working. Then when I try to reinstall the software the printer does not show up. I read and tried every solution and have spent nuerous hours with HP support to no avail.
The printer works fine direct connected via a USB cable and it works fine with two other computers on the same network. One of the other computers has the exact same OS and is the same HP model laptop.
I don't think the uninstall is completley removing all the files or reinstalling everything fresh when I reload. I have tried the Level 1 through 4 uninstall utility posted on HP's site and have tried all sugestions posted in this forum.
Below is a better rundown of the problem.
When the Scan function is called, a "Scanning" window appears, and hangs
I have an HP Laptop with XP32 Bit software
Once the scanning window appears it stays there forever
Only way to clear scanning page is to terminate hpoews01.exe with Task Manager
Scanner does not show up in Paint or Photoshop ect.
Web Scan Does work and printer shows up using IP address.
Scanner shows up fine on a web page
HP support in India has been no help and now my printer is out of warranty so even less help
Thank you,
Dave

I had a similar problem with my OfficeJet L7680 and here's how I fixed it.
18APR10 - from Dan
     I lost my L7680 network link (using CAT5 from printer to router) and could not print to it over the network. However, I could print from a PC with a USB cable directly to the printer, but there are currently three PCs connected wireless to the network.  I think I have a viable solution for anyone with the same problem and is not related to the operating system of the PCs.
     Originally, I went to the HP site and downloaded the program for the L7680, Critical Update to Enhance Reliability of Network and USB Connectivity and Improve System Responsive.... This worked wonders until my modem and/or router went down. I could see ink levels from my PC, scan, print, and so on. Then I somehow lost my network connection again. When I checked the network settings on the L7680 printer panel (Setup, 5 - Network, 1 - View Network Settings, 2 - Display Wired Settings), I noticed a different IP address than the original 192.168.1.100. Once I figured out how to reset the printer to that one, it connected and worked as it should.
    Here's how to reset it: 1. Power down all devices (wired and wireless) to the router (I even disconnected the printer power cord and CAT5 cable at the printer); 2. Power down the modem and router - wait a minute or so before powering back up; 3. Power up the modem and give it a minute or so to go through system checks, which will normally acquire a new IP address from your ISP; 4. Power up the router and let it go through its system checks; 5. Connect the CAT5 cable from the printer to the router and power it up before you power up and connect any other computers. This should assign the printer the first IP address from the router, which should be 192.168.1.100. Once the printer goes through its start-up checks, you can check its assigned IP address from its panel. 6. Power up any other PCs or devices to the router. They should be assigned successive IP address numbers from the router. You can check these using a browser in the PC after typing in 192.168.1.1, logging in to the router, and checking the appropriate place in the router driver/software displayed in the browser. I was not able to reassign IP addresses in my router's driver/software to individual devices, but this method did the trick. I did not try to change the IP address of the printer from its panel to match what had been inadvertently reassigned to it. That might be another option to synchronize the printer and router with the same IP address. If the printer loses its connection again, you'll have to synchronize what the printer has with what the router shows. This worked for me.

Can Connect via Database Control but Cannot Connect from Enterprise Manager

Hi experts,
This is a 10g database on a Windows server.
when I remote into the server:
- I CAN connect via the web-based Database Control
- I CANNOT connect to any db/instance via regular Ent Mgr - get the ugly "ORA-12154 TNS: could not resolve the connect identifier specified" error.
I thought both tools used the same connection files (tnsnames, listerner etc), but maybe not.
When db control connects, but Enterprise Manager cannot, what should I check to find the problem?
Thank you.
John

Thanks madrid.
I eventually got it to work by changing the tnsnames.ora in the client_1 folder
This is the original:
FS9ENFP1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNCLAFDB)(PORT = 1521))
(CONNECT_DATA =
(SID = FS9ENFP1)
(SERVER = DEDICATED)
ORCL=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNCLAFDB)(PORT = 1521))
(CONNECT_DATA =
(SID = orcl)
(SERVER = DEDICATED)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I removed the EXTPROC entry and added entries for the ORCL and FS9ENFP1 databases, specifying server_database like this:
FS9ENFP1_PNCLAFDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNCLAFDB)(PORT = 1521))
(CONNECT_DATA =
(SID = FS9ENFP1)
(SERVER = DEDICATED)
Not really sure WHY it is necessary to list an instance twice, once without server name and another with server name... but EM is able to connect now. I simply modeled tnsnames after another Oracle server where EM was able to connect.
John

After Using Ethernet Connection For Months Airport Will No Longer Connect.

For the last few months I have been connecting my iMac to my Netgear Wireless Router by an Ethernet cable, as I no longer needed to use a wireless connection.
Yesterday, my son tried to connect to my wireless router with his Toshiba laptop. He connected to the wireless signal easily but his web browser was unable to connect to the internet.
So I decided to test my iMac wirelessly to see if I could spot his problem.
I turned on Airport and after a while a window appeared saying,"None of your preferred networks are available".
Yet my network was listed (together with several neighbours' networks).
I highlighted my network and clicked "Join". After a short while the message "Connection Failed" appeared.
Obviously I have tried this numerous times and in different ways to no avail.
I actually changed the name of my network a few weeks ago and tested it successfully at the time.
So my son can connect his PC to the network but can't access the internet, whilst I cannot connect to my router even though I can see it listed.
Any useful suggestions ...... mainly to get my Airport connecting first?
Needless to say when I use an ethernet connection I have no problems accessing the internet.

Sorry, didn't want to post verbose instructions if they weren't needed. Let's go one by one:
Is he getting all the right IP information - IP/mask/gateway/DNS?
Go to a command prompt (Start/run, type CMD then Enter). Then type IPCONFIG then Enter. This will give you everything except DNS. Run IPCONFIG /ALL. Note the DNS server(s). Compare this output with your Mac (System Preferences/Network).
If so, from Terminal, ping the gateway, then DNS, then yahoo.com. Where/when does it fail? If it fails at yahoo.com, does it resolve the name to the IP address?
Whoops, my bad, Terminal is Mac. From the command prompt you're hopefully still in (if not, run CMD again), ping the default gateway listed in the IPCONFIG output from above (type PING followed by gateway address; looks like #.#.#.#) Successful? If so, ping DNS server from IPCONFIG /ALL output. Successful? If so, ping yahoo.com. First, does it resolve yahoo.com to an actual address (i.e. 68.180.206.184)? Do you get replies, or does it timeout?

Azure VM does not connect via RDP after restart

I have restarted my VM running Windows Server 2012 from Windows Azure Portal. After restart it is unable to connect via RDP, although I can connect to it via FTP I had created already. I have ticketed the issue at Windows Azure Support but no reply in past
2 hours.
Any help please?

Hi,
What is the error message you are getting ?
Please check this
document that might help which talks about How to troubleshoot common RDP issues for Windows Virtual Machines in Azure .
Regards,
Shirisha Paderu

Have apple tv 2g and several IDevices (ipad, iphone..)and around the house i have several access point connect via UTP cable to the same router/modem, but when i try Airplay it wont work if the devices are on dif wifi conn. regardelless its the same LAN.

Problem with Homesharing/Airplay with dif IDevices (Itunes with a PC, Iphone, Ipad, Itouch etc) using my home wifi connections that has several access point throu out the house and they all are connected via UTP cable to the same modem/router (My LAN).
When i try to use airplay or homesharing both devices have to in the same ACCESS POINT (it does not mather if its WIRED or WIRELESS, i have the same problem with both).
Any ideas?? This did not happen before i upgraded ITUNES in order to use IOS5.
Thanks

Thanks for the advice. But i dont have any devices sync wifi. It also happens with older versions of IOS on iphone 4.2.1 and 3.1.3 and also IOS5 (no wifi sync enable).
Basiclly when i try to airplay music using itunes (pc) to my apple tv 2g (4.3.3.) they both have to be in the same access point, if the apple tv is connect via UTP cable i have to be connected to that access point wifi. Basicly dosent work with dif access points. Also if i manage to be on the same access point (itunes using a pc and the apple tv) if i have to use Remote App to change songs i have to be in the access point to.. can not see the devices...
Any ideas?

Can't connect via aiport after using AOL connect w/modem

Similar Messages

Maybe you are looking for