Can't connect via cable, but wireless works.

iMac, Leopard, iTunes, all current. AppleTV only shows up when I disconnect my ethernet cable. At that point my Airport base station (older version) makes the connection. If I turn Airport off in the OS, still no go. I've tried multiple cables too. I've also tried my Macbook pro.
I obviously want the wired connection for greater speed and since the ATV is in the room right next to the computer it's no big deal to run a cable. I swear I had this all running correctly under Tiger, but now I'm starting to wonder if it had been wireless all along and I never realized it.
Help!

Hi,
I had the same problem and this worked for me -
Go to System Preferences/Sharing and enable "Internet Sharing" where it says "Share your connection from" choose Airport and where it says "To computers using" select the ethernet port that you've connected the cable from the ATV to on your computer.
Go to System Preferences/Security/Firewall and if you've selected the last option "Set access for specific services and applications" add iTunes to the list by clicking the + and navigating to it.
Regards

Similar Messages

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either. I get an error message with multiple suggestions but none of them apply to my situation.
I am so dissatisfied with this printer. I'm sorry I got it from Amazon because now it is a hassle to return it. I will never buy another Canon.
The printer menus are confusing. I hate using it. I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model. Never again. Stick with cameras.
Marcy Hotz

This note won't be as angry and frustrated as the last one...
Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer. I deleted all the old stuff.
I also had several scanning applications on my drive which just confused me.
When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which). So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
It works now. So I'm satisfied, will keep this maching. I just had to take some time, sit down and focus on the problem.

Can't connect via Finder but works with everything else

The Time Capsule is working fine with Time Machine and Airport. However when I try to connect via Finder, it just says 'Connecting...' and never changes. When I hit 'Connect As...', nothing happens. I have rebooted the TC and deleted all passwords from the keychain but that didnt help. Latest OSX updates and firmware update installed.

I powered down and was relieved to hear the fan jolt and the drive spin so that looks good.
Wireless is currently the only method I've been using to connect to the TC with my macbook because as of right now I dont have a USB->ethernet adapter but I will pick one up later today to see if that changes anything. The cable modem is connected via ethernet though and that seems to be working fine.
The LED is solid green when the modem is plugged in and flashing orange when it is not.
Here is the log after a power cycle, at first I did not have the cable modem plugged in and attempted to access via Finder with no luck. Then shortly after, I plugged in the cable modem and tried Finder again. Its interesting that attempting to access the drive via Finder does not create any activity in the log.
I will try to cool down overnight and hope I can get at the data. At this point, my main goal is to retrieve the files. And then get a new local backup solution asap. I am currently doing a full online backup to Crashplan but with 500GBs, its going to be weeks before it finishes uploading.
Jul 13 05:47:42
Severity:5
Initialized (firmware 7.5.2).
Jul 13 05:47:54
Severity:5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jul 13 05:47:54
Severity:5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
Jul 13 05:47:54
Severity:5
Rotated CCMP group key.
Jul 13 05:48:12
Severity:5
Associated with station 14:10:9f:d5:8e:bb
Jul 13 05:48:12
Severity:5
Installed unicast CCMP key for supplicant 14:10:9f:d5:8e:bb
Jul 13 05:48:13
Severity:5
Binding added for udp, 0.0.0.0:32769 to 10.0.1.3:5353 with lifetime 7200
Jul 13 05:48:23
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50904.
Jul 13 05:48:26
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50905.
Jul 13 05:48:42
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50906.
Jul 13 05:48:44
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50907.
Jul 13 05:48:44
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50908.
Jul 13 05:49:36
Severity:5
(WAN) link state is Up.
Jul 13 05:49:36
Severity:5
Internet configuration leased [IPv4] -- host <69.204.228.249/255.255.254.0> gateway <69.204.228.1> dns <209.18.47.61 209.18.47.62> wins <> lease <43200> domain <nyc.rr.com>
Jul 13 05:49:36
Severity:5
Binding added for udp, 69.204.228.249:32769 to 10.0.1.3:5353 with lifetime 7200
Jul 13 05:49:38
Severity:5
Internet configuration leased [IPv6] -- host <2604:2000:ffc0:27:5c41:d64:1455:8715> dns <> delegated <>
Jul 13 05:49:38
Severity:5
Internet configuration leased [IPv6] -- host <> dns <> delegated <2604:2000:1009:c07c::/64>
Jul 13 05:49:38
Severity:5
IPv6 route advertised [flags=ADDRESS DNS=NONE]
Jul 13 05:49:39
Severity:5
Clock synchronized to network time server time.apple.com (adjusted +6 seconds).
Jul 13 05:49:42
Severity:5
Binding added for udp, 69.204.228.249:32769 to 10.0.1.3:5353 with lifetime 7200
Jul 13 05:49:51
Severity:5
Internet configuration leased [IPv4] -- host <69.204.228.249/255.255.254.0> gateway <69.204.228.1> dns <209.18.47.61 209.18.47.62> wins <> lease <43186> domain <nyc.rr.com>
Jul 13 05:49:51
Severity:5
Binding added for udp, 69.204.228.249:32769 to 10.0.1.3:5353 with lifetime 7200

WRT54GL connects via cable, but not wireless

I've got a WRT54GL that I connected via the ethernet cable, but when I try to connect wirelessly it can't. I've tried EasyLink Connect and EasyLink Advisor to try and fix the connection and "unwire" it, but neither were any help. I can setup my other machines to connect wirelessly, but not the main machine that I used to setup the router intitially.

Hi TWallace,
Are you using cable connection (Comcast,Cox) or DSL connection (Verizon,Qwest)? Were you provided with a username and password by ISP. Since EasyLink Advisor and EasyLink Connect did not work. You would have to manually configure the router. Aside from that, make sure that when you ran either the 2 software (ELA or ELC) you do not have any firewall turned on. Firewall disrupts the connectivity of the device running the tool.
Aside from that, when wiring your computer to the router and you've mentioned it works. Can you try to check the IP address? If XP, click Start > RUN > cmd, once command prompt pops up.. type ipconfig /all then look for IP address.
Thanks

Other PC can access internet via cable but not via wireless.

Hi, I am new here. But I have a question hopefully someone can help to answer. I juts got myself signed up for one of those portable USB modem that you can use anywhere and you use a phone sim card to access the internet. I connect the usb device to my desktop computer and use a linksys wireless router to connect to other pc in the house. My problem is that the internet can be access by other pc's if I connect the other pc's via a network cable but no internet all if I connect via wireless. Any reason why it work via cable and not via WIFI? Is it the setting inside the router that is not set correctly. I pretty much left the setting on factory default except for the wireless network name. Any help to explain why this is happening is much appreciated. Thanks. Alex

Follow these steps to upgrade the firmware on the device: - Open
an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin
Click on the 'Administration' tab- Then click on
the 'Firmware Upgrade' sub tab- Here click on 'Browse' to select the
extracted/uncompressed .img or .bin file and click on "Upgrade"-Wait for few seconds ....
It shows that "Upgrade successful" After
the firmware upgrade, click on "Reboot" and you will be returned back
to the same page OR it will say "Page cannot be displayed".
Reset the router for few seconds ....
Reconfigure it ....

Powerbook G4 can't connect via ethernet but connects via airport

We have a small office network connected to an Efficient Networks DSL router that's managed by our isp. The router has 4 ports and a linksys 8 port switch is connected to one of those ports. Another D-Link wireless router/switch is connected to another port.
2 i-macs connect without problem via ethernet cable. They are set to DHCP and get 192.xx private addresses. Both run 10.4.5. Another older imac running 9.2.2. also has no problems.
I recently purchased a powerbook G4 and it will not connect via ethernet to the Efficient networks router. At first it was connected to the linksys, so decided to connect it direct to the Efficient Networks router. With DHCP, it acquires a 169. internet address which is self generated (i.e. no real connection). I tried to give it a static private address (talking to the isp provider). They could see the powerbook but saw all zero's (presumable mac address). By the way the Powerbook works perfectly at home connected via ethernet cable to a D-Link router connected to a cable modem so it's not a physical problem. I even checked the ethernet cable I used in the office with another computer - no problem.
When I switch to airport in the office, the powerbook connects to the network and the internet. I get some strange warning messages showing the server's and the router's private ip addresses. I click ok, and the powerbook finds an unassigned private ip address. It's the only way it will work, but it causes problems, because I can't connect to one of the network printers. Speed also isn't great.
Can anyone give me advise how to proceed. I am no expert on this stuff so keep it as simple as possible.
Tks

Tim,
Thanks for your help. Here's what I've done before reading your e-mail. The D-Link DI-524 wireless router is connected to the Effiicent Neworks DSL router as you mentioned. One ethernet port of the EFF.Net. router is connected to the WAN port of the DI-514.
Because I have a D-Link router at home which works flawlessly with my powerbook, I decided to connect the ethernet cable of the powerbook to the D-Link which has 4 ethernet ports. Lo and behold, the powerbook acquired a private ip address and connected to the LAN and internet!
When I connected the powerbook direct to the Efficient Networks router, it could not communicate. I believe that there must be some software incompatibility between the powerbook and the Efficient Networks router. By connecting to the D-Link, the D-Link assigned an ip address to the powerbook, and it could connect to the server, lan, etc..
Only problem is that I have a Brother network printer that cannot connect to the powerbook. My powerbook cannot find it on the network. Because there is a linksys switch connected to the efficient networks router's third ethernet port, maybe as you said, going through the D-Link via DHCP (when the Linksys is also acting as a DHCP server, might cause this type of problem. What do you think?
As a final note, other imac G5's connected to the linksys switch (which then connects to the Efficient Network's router) have no problem connecting to the lan or internet and have no problem connecting to any of the printers. When I put the powerbook on that switch, I could not connect to the internet - i.e. whether connecting via the lynksys switch or direct with the efficient networks router - same results: no internet connection whether manually or via DHCP.
So the imac G5 has no problem with the efficient networks router but the powerbook G4 hits a brick wall. The G4 likes the D-Link router. I am concerned (and I will have to check this) that if I turn off the dhcp server feature from the D-Link, that whatever software issue crops up between the powerbook and the Efficient Networks router, will rise up again, because the D-Link will act like a simple switch (just like my linksys switch), and we'll be back to square zero. In any case, no harm in trying. This may be the cause of the Powerbook not seeing that Brother printer (even though it sees another printer and other macs).
Having spent hours reading about network problems, I think it's safe to say that macs have problems with certain routers. Why a G5 works and a powerbook G4 doesn't is beyond me, but clearly software must play a role.

Connect via ethernet but wireless for internet

I don't know why, but my apple tv seems to have forgotten how to connect to the internet and I can't make it remember, lol. Now I will stress, this used to work, and I don't know why it suddenly doesn't work anymore...
Basically I have wireless set up at home for the internet. However, I connect to my apple tv via direct ethernet cable between my imac and the apple tv itself. I have set up internet sharing in preferences to share my airport connection over ethernet, which my apple tv used to be able to use ok to connect to the itunes store/you tube, etc. However, it now can't. I had some trouble with it this morning where it wouldn't connect to the ethernet network at all, although it now does. However, it no longer uses the iMac as it's router and I can't seem to figure out why. Can anyone help?
Thanks!

Chris Johnson2 wrote:
We have one MBP (10.5.8) that is able to connect to our network via Ethernet and use all services. But, when it connects via Airport, it will connect to the wireless router, but will not connect to the Internet or the network...
You might try the three suggestions in the second message of this thread:
http://discussions.apple.com/message.jspa?messageID=10445592

Airport Extreme wired network can't assign IP address, but wireless works

*Problem details:*
We have three computers intermittently on, wired into the ethernet LAN managed by the Airport Extreme.
We have a few more computers that connect to the wireless network managed by the same Airport Extreme.
As far as I know, no fancy settings hijinks have been attempted. I manage the router, and I only plugged the Airport into the cable modem and connected all the wires to the computers. The WiFi setup went a similar way -- I just turned it on and it sorted itself out. This was eight months ago, mind you -- everything has been going quite well up until this weekend.
But! I got home from a trip this weekend to discover that all the machines that connected over the wired network could no longer get a connection to the internet. Any machine connected over the wireless network, however, was working just fine. Indeed, my macbook pros couldn't even see the Airport Extreme when I turned off their WiFi, connected them over Ethernet and opened the Airport Extreme configuration app!
The wired machines complain that they have a self-assigned IP address. Sometimes, after resetting everything, they look like everything's fine for a moment. Like I said, ordinarily my macbook pro does not even recognize the router over the wired network. However, after reverting to factory defaults and restarting the Airport, the laptop did see it (until a few minutes went by and it realized something was wrong).
I figured that renewing my DHCP lease would fix this problem, but it did not. Nor did turning off Passive FTP Mode (PASV) under Proxies in the Network configuration pane.
I have tried resetting the router to factory defaults, power cycling the modem and router in various configurations, etc. but nothing has worked. In addition, I have verified that connecting any machine to the ethernet directly from the modem will work, so the problem is definitely being introduced by the Airport Extreme.
So I guess my question is: what do I have to poke to return everything to normal? I'd like working wired and wireless networks again.
*Some last few details:*
The Airport is running 7.5.2, but downgrading to 7.4.2 produced no tangible difference.
I have an Ubee D3.0 modem. All lights are green and blinky except the DS light, which is solid amber (and it is green when the modem is wired directly to one of my computers -- it's only amber when connected to the Airport).
Some of the machines that can't connect to the wired network are PCs, so it's not just an OSX thing.
My roommate's XBOX 360 can connect to the internet over the wired port. It doesn't have WiFi, so I'm pretty sure there's no way it could be fooling me.
Thanks in advance for any advice you can muster.
EDIT FOR APOLOGIES:
I didn't realize I was posting this in the "Airport for Windows" section. While a Windows computer's connection is a concern, I would much rather get my Macs online and deal with that first. I can't figure out how to move the message myself.

*An update:*
Several days later, this issue seems to have fixed itself. I suspect there may have been Funny Business on my ISP's end (but then again, it's an ISP).

Macbook can't connect via L2TP but can via PPTP. iPhone can connect to both

So I've been banging my head up against the wall for the better part of this morning trying to figure this out. Just as a note, I'm 3000 miles from my house and server, but I do have access to it for the time being via PPTP.
Before I left, I verified that I could connect with L2TP on my iphone's 3G network. I was also able to connect at the airport on my Macbook using L2TP. Sometime overnight something changed, and I can't figure out what. I noticed that my phone dropped it's VPN connection saying something like "the connection to the server dropped unexpectedly" or such. After that, I was unable to connect over L2TP on my macbook or iphone. On a whim I tried connecting over PPTP which worked! But only on my macbook. Again on a whim I tried to connect via L2TP on my iphone, and it worked?! I rinsed, lathered and repeated that process over and over again and confirmed that I could only connect over L2TP on my iPhone after connecting on my macbook over PPTP. Also, on my iphone, if I stored the password it wouldn't authenticate (probably not related).
As of this moment I am connected using L2TP on my iphone for the last hour, using it to successfully stream Pandora across US borders, but can't sustain a PPTP connection on my macbook for longer than 10 mins. And I still can't connect over L2TP. So that said here are the client and server logs (ips, domains and usernames masked....) Server and clients are in different timezones:
*Macbook when trying to connect via L2TP:*
Mon Dec 21 12:30:32 2009 : L2TP connecting to server 'nnn.nnn.nnn' (xxx.xxx.xxx.xxx)...
Mon Dec 21 12:30:32 2009 : IPSec connection started
Mon Dec 21 12:30:32 2009 : IPSec phase 1 client started
Mon Dec 21 12:30:42 2009 : IPSec connection failed
*Server Log for the above transaction:*
NO RECORD
*Macbook when trying to connect via PPTP:*
Mon Dec 21 12:49:44 2009 : PPTP connecting to server 'nnn.nnn.nnn' (xxx.xxx.xxx.xxx)...
Mon Dec 21 12:49:44 2009 : PPTP connection established.
Mon Dec 21 12:49:45 2009 : Using interface ppp0
Mon Dec 21 12:49:45 2009 : Connect: ppp0 <--> socket[34:17]
Mon Dec 21 12:49:48 2009 : MPPE 128-bit stateless compression enabled
Mon Dec 21 12:49:49 2009 : route_interface: write routing socket failed, File exists. (address xxx.xxx.xxx.0, mask 255.255.255.0, interface ppp0, host 0).
Mon Dec 21 12:49:49 2009 : local IP address xxx.xxx.xxx.233
Mon Dec 21 12:49:49 2009 : remote IP address xxx.xxx.xxx.109
Mon Dec 21 12:49:49 2009 : primary DNS address xxx.xxx.xxx.109
Mon Dec 21 12:49:49 2009 : secondary DNS address xxx.xxx.xxx.109
Mon Dec 21 12:49:49 2009 : pptpwaitinput: Address added. previous interface setting (name: en1, address: xxx.xxx.xxx.6), current interface setting (name: ppp0, family: PPP, address: xxx.xxx.xxx.233, subnet: 255.255.255.0, destination: xxx.xxx.xxx.109).
*Server Log for the above transaction:*
2009-12-21 09:49:44 PST Incoming call... Address given to client = xxx.xxx.xxx.233
Mon Dec 21 09:49:44 2009 : Directory Services Authentication plugin initialized
Mon Dec 21 09:49:44 2009 : Directory Services Authorization plugin initialized
Mon Dec 21 09:49:44 2009 : PPTP incoming call in progress from 'xxx.xxx.xxx.xxx'…
Mon Dec 21 09:49:44 2009 : PPTP connection established.
Mon Dec 21 09:49:44 2009 : using link 1
Mon Dec 21 09:49:44 2009 : Using interface ppp1
Mon Dec 21 09:49:44 2009 : Connect: ppp1 <--> socket[34:17]
Mon Dec 21 09:49:44 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x206a2bb5> <pcomp> <accomp>]
Mon Dec 21 09:49:45 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4b8d229c> <pcomp> <accomp>]
Mon Dec 21 09:49:45 2009 : lcp_reqci: returning CONFACK.
Mon Dec 21 09:49:45 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4b8d229c> <pcomp> <accomp>]
Mon Dec 21 09:49:47 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x206a2bb5> <pcomp> <accomp>]
Mon Dec 21 09:49:48 2009 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x206a2bb5> <pcomp> <accomp>]
Mon Dec 21 09:49:48 2009 : sent [LCP EchoReq id=0x0 magic=0x206a2bb5]
Mon Dec 21 09:49:48 2009 : sent [CHAP Challenge id=0x7f <3b77645a35056d6f176a3d4302524136>, name = "OSXServer.kimnet"]
Mon Dec 21 09:49:48 2009 : rcvd [LCP EchoReq id=0x0 magic=0x4b8d229c]
Mon Dec 21 09:49:48 2009 : sent [LCP EchoRep id=0x0 magic=0x206a2bb5]
Mon Dec 21 09:49:48 2009 : rcvd [LCP EchoRep id=0x0 magic=0x4b8d229c]
Mon Dec 21 09:49:48 2009 : rcvd [CHAP Response id=0x7f <51f69894a74fc550cf12b270ceb43da90000000000000000d7a8e304c6080e5d0315a47e9783a4 8ce2ae8fdb00671adc00>, name = "nnnnnnnn"]
Mon Dec 21 09:49:48 2009 : sent [CHAP Success id=0x7f "S=09A448E00B717E032D200EAEFA793E57AF9B9676 M=Access granted"]
Mon Dec 21 09:49:48 2009 : CHAP peer authentication succeeded for nnnnnnnn
Mon Dec 21 09:49:48 2009 : DSAccessControl plugin: User 'nnnnnnnn' authorized for access
Mon Dec 21 09:49:48 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : rcvd [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : MPPE 128-bit stateless compression enabled
Mon Dec 21 09:49:48 2009 : sent [IPCP ConfReq id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:49:48 2009 : sent [ACSCP ConfReq id=0x1]
Mon Dec 21 09:49:49 2009 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Mon Dec 21 09:49:49 2009 : ipcp: returning Configure-NAK
Mon Dec 21 09:49:49 2009 : sent [IPCP ConfNak id=0x1 <addr xxx.xxx.xxx.233> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::0217:f2ff:fec8:ef86>]
Mon Dec 21 09:49:49 2009 : Unsupported protocol 0x8057 received
Mon Dec 21 09:49:49 2009 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 17 f2 ff fe c8 ef 86]
Mon Dec 21 09:49:49 2009 : rcvd [IPCP ConfAck id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 04]
Mon Dec 21 09:49:49 2009 : rcvd [IPCP ConfReq id=0x2 <addr xxx.xxx.xxx.233> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : ipcp: returning Configure-ACK
Mon Dec 21 09:49:49 2009 : sent [IPCP ConfAck id=0x2 <addr xxx.xxx.xxx.233> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : ipcp: up
Mon Dec 21 09:49:49 2009 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp1, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.233).
Mon Dec 21 09:49:49 2009 : found interface en0 for proxy arp
Mon Dec 21 09:49:49 2009 : local IP address xxx.xxx.xxx.109
Mon Dec 21 09:49:49 2009 : remote IP address xxx.xxx.xxx.233
Mon Dec 21 09:49:49 2009 : pptpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp1, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.233).
Mon Dec 21 09:49:49 2009 : rcvd [IP data <src addr xxx.xxx.xxx.233> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
Mon Dec 21 09:49:49 2009 : sent [IP data <src addr xxx.xxx.xxx.109> <dst addr xxx.xxx.xxx.233> <BOOTP Reply> <type ACK> <server id 0xc0a8016d> <domain name "nnn.nnn.nnn">]
*Server Log for iPhone L2TP login:*
2009-12-21 09:52:38 PST Incoming call... Address given to client = xxx.xxx.xxx.202
Mon Dec 21 09:52:38 2009 : Directory Services Authentication plugin initialized
Mon Dec 21 09:52:38 2009 : Directory Services Authorization plugin initialized
Mon Dec 21 09:52:38 2009 : L2TP incoming call in progress from 'xxx.xxx.xxx.xxx'...
Mon Dec 21 09:52:38 2009 : L2TP received SCCRQ
Mon Dec 21 09:52:38 2009 : L2TP sent SCCRP
Mon Dec 21 09:52:38 2009 : L2TP received SCCCN
Mon Dec 21 09:52:38 2009 : L2TP received ICRQ
Mon Dec 21 09:52:38 2009 : L2TP sent ICRP
Mon Dec 21 09:52:38 2009 : L2TP received ICCN
Mon Dec 21 09:52:38 2009 : L2TP connection established.
Mon Dec 21 09:52:38 2009 : using link 0
Mon Dec 21 09:52:38 2009 : Using interface ppp0
Mon Dec 21 09:52:38 2009 : Connect: ppp0 <--> socket[34:18]
Mon Dec 21 09:52:38 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x6b3541df> <pcomp> <accomp>]
Mon Dec 21 09:52:38 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x24ff54dc> <pcomp> <accomp>]
Mon Dec 21 09:52:38 2009 : lcp_reqci: returning CONFACK.
Mon Dec 21 09:52:38 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x24ff54dc> <pcomp> <accomp>]
Mon Dec 21 09:52:39 2009 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x6b3541df> <pcomp> <accomp>]
Mon Dec 21 09:52:39 2009 : sent [LCP EchoReq id=0x0 magic=0x6b3541df]
Mon Dec 21 09:52:39 2009 : sent [CHAP Challenge id=0x6d <4322331b3d22406914173d5e0d176c29>, name = "nnn.nnn.nnn"]
Mon Dec 21 09:52:39 2009 : rcvd [LCP EchoReq id=0x0 magic=0x24ff54dc]
Mon Dec 21 09:52:39 2009 : sent [LCP EchoRep id=0x0 magic=0x6b3541df]
Mon Dec 21 09:52:39 2009 : rcvd [LCP EchoRep id=0x0 magic=0x24ff54dc]
Mon Dec 21 09:52:39 2009 : rcvd [CHAP Response id=0x6d <f46ecd855c624eef611f02096c87d7650000000000000000f7430743bc328cbca68540408d0103 2e0a60fb95fcc2b83600>, name = "xxxxxxx"]
Mon Dec 21 09:52:39 2009 : sent [CHAP Success id=0x6d "S=0A046B9F1C59085076A8F2B736929E19391BDC4B M=Access granted"]
Mon Dec 21 09:52:39 2009 : CHAP peer authentication succeeded for xxxxxxx
Mon Dec 21 09:52:39 2009 : DSAccessControl plugin: User 'xxxxxx' authorized for access
Mon Dec 21 09:52:39 2009 : sent [IPCP ConfReq id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:52:39 2009 : sent [ACSCP ConfReq id=0x1]
Mon Dec 21 09:52:40 2009 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Mon Dec 21 09:52:40 2009 : ipcp: returning Configure-NAK
Mon Dec 21 09:52:40 2009 : sent [IPCP ConfNak id=0x1 <addr xxx.xxx.xxx.202> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::8948:cf2a:8334:7077>]
Mon Dec 21 09:52:40 2009 : Unsupported protocol 0x8057 received
Mon Dec 21 09:52:40 2009 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 89 48 cf 2a 83 34 70 77]
Mon Dec 21 09:52:40 2009 : rcvd [IPCP ConfAck id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 04]
Mon Dec 21 09:52:40 2009 : rcvd [IPCP ConfReq id=0x2 <addr xxx.xxx.xxx.202> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : ipcp: returning Configure-ACK
Mon Dec 21 09:52:40 2009 : sent [IPCP ConfAck id=0x2 <addr xxx.xxx.xxx.202> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : ipcp: up
Mon Dec 21 09:52:40 2009 : pptpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp0, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.202).
Mon Dec 21 09:52:40 2009 : found interface en0 for proxy arp
Mon Dec 21 09:52:40 2009 : local IP address xxx.xxx.xxx.109
Mon Dec 21 09:52:40 2009 : remote IP address xxx.xxx.xxx.202
Mon Dec 21 09:52:40 2009 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp0, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.202).

I'm having similar issues but not much luck getting any answers. I made a similar post here - maybe something in there will help you.
One thing I have been able to pinpoint is that the MobileMe Back To My Mac service was causing quite a few issues with being able to connect to the VPN. Once I turn off the service, connection seems to work fine. Although, once I'm connected, I cannot access file sharing. Still waiting for some answers on that.

HT5361 Mail.app can't connect to Gmail, but was working fine yesterday

Suddenly this morning gmail can't connect to server. I tried changing the password, still nothing. I'm getting mail in Gmail if I log into Google and I'm
getting it on my phone, just not on my MackBook Air.

Hi there barbls,
You may find the troubleshooting steps in the article below helpful.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
-Griff W.

Imac can't connect to internet but ethernet working

Any ideas on how to resolve this, has me baffled. In an office where all other computers can connect but for some reason this imac can't.

Is the indicator next to Ethernet in the left Network panel breen or red? Green should indicate it is enabled.
Did you se your IPv4 setting appropriately (probalby DHCP).
Try using alternate DNS servers such as OpenDNS (208.67.222.222, 208.67.220.220) or google's DNS's (8.8.8.8, 8.8.4.4). Click the Advanced button, TCP/IP, and renew your lease if you are using DHCP. Configure IPv6 as Automatically (or off?). Also make sure all proxies are off.
For comparison look at the Network settings for one of the machines that is working.
Finally, is this machine connected to a router that may have its own problems?

Cannot connect via cable on Windows XP home SP2

Good Afternoon,
Maybe you can assist me here.
I cannot connect via cable my N91 (4 gb hdd) to Windows XP Home SP2. I can however connect via cable to my work computer which has the OS Windows XP Pro sp2.
In both cases both OS's are up to date, I have updated the phone OS to v2.10.013 RM-43. I am using the most up to date drivers that is available on nokia.com as well as the current ed of PC Suite (6.82.22.0)
The following is the steps I followed in both cases starting with XP Pro
1. Installed Drivers
2. Installed PC Suite
3. When prompted by PC Suite connected Phone via cable to Computer, further install steps were required. No reboot required. PC Suite then picked up phone
XP Home
Followed steps 1 + 2 in the same order
3. Connected N91 to XP Home computer, after driver install activity rebooted computer as requested. Disconnected N91 On reboot to desktop, in PC Suite I clicked on Get connected. Select Cable connection when prompted attached cable to computer and then to phone, on the phone select PC Suite. .
At this point I get the hour glass and nothing happens, Next is ghosted. It has been like this for 20 mins.
I have uninstalled both the drivers and the software. For some reason the updater can connect to the phone.
Can you advise on what I can do.

Hi
Sounds lik ethe PC is having issues seeing it. Try this
/discussions/board/message?board.id=pcsuite&message.id=11480
Try this first:
1. Go to Windows' Control Panel and open "Add or Remove Programs" application.
3. Select "PC Connectivity Solution", click "Change" and then "Repair".
4. After Repair, restart PC
music

Is it possible to recover my data from iCloud backup without working wifi? I have as many other upgraded my iPhone 4S to iOS 7.0.2 with the result that the Wi-Fi or Bluetooth no longer works. However, i can connect to iTunes via cable but there is wrong v

Is it possible to recover my data from iCloud backup without working wifi? I have as many other upgraded my iPhone 4S to iOS 7.0.2 with the result that the Wi-Fi or Bluetooth no longer works. However, i can connect to iTunes via cable but there is wrong version of backup.

Answer is no.
If you want the iCloud backup you have to have n internet connection, thus WiFi.
The not working WiFi has happened with quite a number of users.
It is not exactly clear what is the cause but there are suggestions to clear it up:
Some people have had success by removing an apostrophe from the iPhone name. If your iPhone is called something like “John’s iPhone” then this might work. Go to Settings > General > About > Name and change it to something with no apostrophe.
Some people have reported success by putting the iPhone into Airplane mode and then going to Settings > General > Reset > Reset Network Settings, but the problem may return.
You could also try going to Settings > Control Center and disable Access on Lock Screen then turn your iPhone off and on again.
Make sure that your router firmware is up to date.
Try backing up your iPhone and then restoring it. Check how to factory reset an iPhone for details.
If nothing is working for you, try contacting Apple or take your iPhone into an Apple Store.
Succes, Lex

D-Link wireless + Cable Internet:: can't connect via AirPort

Just got my service changed from DSL to Cable and can't connect via wireless (but can with an Ethernet cable). Have tried the Wi Router settings to no avail. Any ideas? I think I might not be doing some setting in the comp correctly. Please help. Router is D-Link DIR-625.

Did you open Airport and see if you see the wireless router? If you can see it, you can select it and then make sure it is set up properly in networks in the system prefs.

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8?

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8? Any ideas for a fix?

iOS devices use AirPrint to connect to a supported printer. OS X will use Bonjour to locate and connect to the same printer.
With the Epson connected to your wireless router, when you open Print & Scan and click the plus button to add, does the Epson appear in a small box with a heading of Nearby Printers?
If not and a window appears showing Default, Fax, IP and Windows in the toolbar, do you see the Epson with the Default view selected?

Can't connect via cable, but wireless works.

Similar Messages

Maybe you are looking for