Can't Connect Windows XP box to TC

Greetings All,
I setup a new TC 1GB for wired and wireless access. All the Macs connecting to it are accessing it wirelessly with no issues. I have 1 WinXP box that is hard wired directly into the TC. It gets a DHCP address and connects to the Internet fine. But my issue is trying to access the shared files on the TC with the XP machine (which works fine on the macs). I have setup TC password access (not usernames/passwords). I have installed the Airport Utility on the XP machine. It does pop up that it finds the TC and asks for the password to connect - which I put in carefully a zillion times. After a minute of thinking it errors and tells me I can't access it (something about wrong password, which is false). I have NETBIOS enabled.
Does anyone have any suggestions? DOS commands to map a permanent drive perhaps?
Thanks in advance,
-andy-

I'm so terribly disappointed that I won't be able to use the Migration Assistant to move from the PC to the MAC. Apple makes working so easy, and most of the time I spend on my Microsoft products is spent trying to make them work. I have had no such issue since I purchased my new MAC 5 years ago, and any glitches are always easily resolved. I have had nothing but greif on the PC and Microsoft products, which I will not miss AT ALL. I only wish there was a steep cliff near my house so I could enjoy the sadistic pleasure of watching this POS bounce off the rocks, after all this misery.
I know that all of you would have gladly helped me if you had any idea how.
I look forward to never having to work with MicroCrap again.

Similar Messages

Can I connect my cable box to my 2011 iMac

Can I connect my cable box to my 2011 iMac

If you are setting up to use Wi Fi connect the Ethernet cable to the cable box then to the router.
Some companies like Comcast have online manuals available online for instructions. Check your cable company's web site. The manuals should be available in PDF format.
Message was edited by Carolyn

Can I connect window device like modem, mobile in oracle forms,if possible then how?

Can I connect window device like modem, mobile in oracle forms,if possible then how?

Hi Tony,
So explain where you would see your notification?I just mention, Leave module, there are many other module. For example In Purchase Purchase Requigition , Production Module Production Complite , Delivery Module Delivery Ready.
For this it will better to show at respective Menu.
In the Window title?Another good Idea !
You could have a timer trigger that runs every 5 minutes and checks a notification table, if there is an unacknowledged notifcation, then you could change the Window title of the formas app to show a (1) at then end of it.Timer has a bad this.. For example, if i make a timer and run every 5 min. then if user works on a form, timer will hide the form and show the timer window.
Isn't it ?
Would that do, or do you need more?Yea.. More..It will be like facebook. If any notified work is done by any person, light will go off.
Thanks for your interest and suggestion...
Ask2Learn
Edited by: Asked to Learn on Jan 23, 2013 12:36 AM

How can i connect windows(laptop) to lion server?

Hi..
We in our company use mac's as clients. We use Mac OSx 10.7 lion server. We have a lenovo laptop for general purpose. Now can we connect that laptop in network. So that can we remotely use mac screen sharing.

Are you asking how to connect to FileSharing from the PC ?
Or are you asking about screensharing?
On Server
If file sharing, edit the SharePoint and make sure that
Windows File Sharing (SMB) is enabled
On the PC:
Map a network drive
\\10.0.0.1\Share
(your IP and the share name)
Make sure you check the box to use another account or user/password
It will then ask you to enter a password.
In general, the above should work.
There are some cases where it requires a few other tricks.
Good Luck

Xbox one controller can not connect windows

I have xbox one controller, but i can not connect to the windows on my iMac 21,5" late 2012 even though the driver was already installed on the windows
- imac 21,5" late 2012
- windows 8.1 pro 64 bit
- windows support software v. 5.1.5621

I don't have the xbox one controller but the xbox 360 controller and it works fine in windows 8.1 in bootcamp on my imac
my controller don't connect by bluetooth or whatever it has an usb dongle that came with it

Can't connect to X-Box live with Air Port Extreme

I just can't figure out how to connect my X-Box (original/first X-Box) to X-Box Live using my Airport Extreme. I am using an X-Box wireless modem. X-Box live phone help told me I needed to contact Apple and have them "Open three NAT Ports: 1. UDP 88, 2. UDP 3074, and 3. TCP 3074. Then to enable UPNP." WHAT?? Since I do not have Apple Care, they are unwilling to help me. I have tried manually entering the IP address and Subnet into my X-Box, but then the X-Box tells me there is no "Gateway" something or other. And I can't seem to find the "Gateway" on my Mac in Airport settings. Can anyone help?
-Thanks!

Acces setup page of router .....
Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live.

Hi,how can i connect a bird box camera to cq61?

Hi,
in trying to connect a bird box camera to my Presario CQ61.It is supplied with the bayonet red/white leads and a scart to tv.I cannot find an adaptor for these-Help!
Thank-You

Just guessing, but Windows wont see it unless you have a driver/interface that makes it appear to windows as a video device.

Can't connect Windows 8.1 Enperprise to Windows Server 2012 Essentials. Get a Digest Login page and then a Blank with HTTP 404 Error page. Need help!

Hi,
I have make a new and clean install of Windows Server 2012 R2 Essentials on my office network server and then i made a new and clean install of Windows 8.1 Enterprise version on one of my office desktops.
After all VPN and Anywhere Access where setup on the server i when to a PC that is inside my office network and browse on Internet Explorer to the URL to connect this PC to the server and make it part of the domain.
But when i browse to the http://MYSERVERNAME/connect im not getting the Windows Server page with the option to download the windows connector. Instead i get a login pop-up saying "iexplore" and "digest". I try to create a user on the server
and use that user login details on this login box, but even then, the only thing i get is a blank page saying a HTTP Error 404.
So can someone please help me on this? Any advice on how to solve this problem in order to show the normal Windows Server connect page?
Thanks

Hi,
Based on your description, please refer to following operations and troubleshoot this issue. Then check if
can help us to narrow down the cause of this issue.
Please type
http://server-IP-address/connect in IE. Then check if encounter the same issue.
On the Windows Server 2012 R2 Essentials, please open Internet Information Services (IIS) Manager. Navigate to Sites, then right click Default Web Site and select
Edit Bindings… In Site Bindings, select Port 80 and click “Edit…” button. Would you please provide a screenshot of the Edit Site Binding (Port 80) that you can see?
Then please click
Connect which in the list of Default Web Site. In the mid panel, select
.NET Authorization Rules and double click it. Then please check if all users were allowed.
By the way, would you please provide a screenshot of the login page when you browser
http://servername/connect? It may help me to understand this issue clearly.
Meanwhile, please logon a problematic client computer and navigate to the path: C:\ProgramData\Microsoft\Windows
Server\Logs folder. Then check if there is Computerconnector log file. If there is, please check it if can find some clues. (Please note: the log file is a hidden file. Please open Control Panel, select Folder Options, select View tab and check Show hidden
files, folders and drives. Then you will be able to find the log file.)
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Can I connect Windows 7 to a mac network account server

Hi All,
I have a Mac Mini Server allong with a pile of Macs and a few PCs. What I want is being able to login to an ACCOUNT from ANY of my macs OR PCs. So when the computer turns on it asks you to put in a username and password. I know this is possible if all computers are running the same opperating system but i am not sure how to do it with different opperating systems.
Thanks,

I was struggling with this for a few days as well! Finally got it working though ! YAY !
Here are the steps:
1. Add this to your registry:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\PolicyAgent]
"AssumeUDPEncapsulationContextOnSendRule"=dword:00000002
2. Open secpol.msc (click start > search for secpol.msc)
- Local Policies > Security Options
- Network Security : LAN Manager Auth Level…
- Set to: Send LM & NTLMv2 - UseNTLMv2…
And
- Network Security : Minimum session security… clients
- uncheck "Require 128-bit encryption"
3. Restart PC
4. Create VPN Connection on Windows 7
- Host Name: (server IP or yourhost.name.com)
- PPP Settings : Enable LCP (only)
- Type: L2TP/IPSec
- Pre-shared key : yoursharedsecret
- Data encryption : Optional encryption
- Allow CHAO and CHAPv2
5. Router on server-side must allow VPN Passthrough and forward ports: 50, 51, 500, 548, 1701, 1723, 4500 to the server box. Also, do not filter anonymous internet requests, multicast or NAT Redirection but enable SPI Firewall.
...now you should be good to go

Can't connect windows xp using airport extreme to internet

Hi i just purchased my airport extreme base station. I tried connecting it to my windows xp for internet and so i can have wireless connection to my macbook.
Im using timewarner cable as my ISP connected through ethernet. I choose DHCP in the configuration to detect IP address provided but I couldn't connect and it tells me invalid IP address.. (i followed the instruction from the manual)... I tried to do it manually then I typed my IP address,but it asks for
1. Subnet Mask- not sure so I just went by whats default which is 255.255.0.0
2. router address- I dont know where to get this.. tried 10.0.1.1, 10.0.1.2, 192.168... no clue where to get this...
The light was on amber when I used DHCP (automatic)- which gives me error of wrong IP address
After I did it manually with my IP address its now green still no internet connection (problem is probably subnet mask and router address)
can anybody help please?
HP 1240n Windows XP Macbook
HP 1240n Windows XP Macbook

Ace83, Welcome to the discussion area!
I tried connecting it to my windows xp for internet...
The cable modem should be powered off and connected to the WAN port on the AirPort Extreme base station (AEBS). The PC should be connected to one of the AEBS's LAN ports.
Configure the AEBS to use the same settings as the PC was using to connect to the Internet. The PC should now be configured to use DHCP and Ethernet to get on the Internet.

Can't connect Windows computers to Airport Network/Base Station

I'm looking for some help with my Airport Extreme. I presently have it set up and working on my MAC. I can connect to the internet with no problem. But when I have tried to allow 2 family members to connect their windows computers to the internet (I give them the WPA2 key, etc...) using our wireless network they are unable to do so. Their computers detect our wireless network but when they type in the key it gets stuck "acquiring the network address". Any ideas what's happening? I greatly appreciate your help.

I suggest using the following instructions to re-check your AirPort Extreme Card/Antenna cable installation in your G4 iMac just to be sure nothing was missed: iMac (17-inch 1GHz) and iMac (USB 2.0): Customer-Installable Parts Instructions
Also, check that the antenna cable is firmly attached per this Apple Article: http://docs.info.apple.com/article.html?artnum=108039
I have the base station connected to a pc so I can't download iStumbler.
For the PC, you can use NetStumbler instead.
I'm not sure how to check if a signal is being sent through Airport utility.
Instead of the AirPort Utility, you can use the Internet Connection utility to verify signal strength of your base station. To access this utility, just right-click the AirPort status icon in the menu bar, and then, select it from the drop-down menu.

Can't connect Windows 7/XP to Lion network shares.

Just updated my primary system to Lion, and can't get any of my Windows clients to authenticate to the network shares. I can connect Lion to Lion (AFP), Lion to Windows 7/XP (SMB), but not Windows 7/XP to Lion (SMB). Everything was working fine under Snow Leopard, and I have tried everything I can think of to get it working. Windows sees the Lion system, just doesn't authenticate the user account when I try to connect using either machine name or ip address.

That's dumb, there is already a registry DWORD named LmCompatability level with a value of 1! I get this all the time... none of you, and I mean none of you really knows why Win 7 cannot connect to Win server 2000! It could be patches, updates,
or maybe one day it just decides to work! It's just like the other posts on how to set up VPN... ha! They leave out the most important part... you have to call your ISP and get a static IP address issued! For example, you have to call
Charter or Comcast and get a static IP. They go through all the nice stuff in the server side and show how to set up VPN but they never start out with, "First of all you need to get a static IP address otherwise it won't work, or you also should get
a VPN router with firewall or you system will be wide open.... and etc....."
I was fighting with my win7 to connect to my server 2003, and you know what? I don't even know what I did! It just started to connect after I loaded a bunch of updates! ... and after I find out that also have to sign with the Admin password
NOT just make up a name in Active Directory and try signing in with that one...doesn't work.... have to sign in with the Admin password...
Anyone who has ever tried to sign in with Win 7 to an older server should know this stuff! Most of you sound like you never even tried to connect win 7 to a server, but your taking a crack at answering the post in this thread anyways...! #fail!
Some of you people either are lousy teachers or you don't know, but you have the urge to give out erroneous info!! What are you, 16? 8?

Can't connect windows server 2003 with domain account

I have installed an agent on windows 2003 server successfully but I cannot add domain account as a preferred credential to connect to windows. My OMS is 11g running on RHEL 5 and I am trying to deploy sql server plugin to windows 2003 server. I could deploy the plugin with the same domain account to windows 2008 without any error but for some reason, but I cannot use the same domain account on windows 2003. This domain account is part of administrator group on both 2003 & 2008 servers so I don't know what I need to do different for 2003. Please help me. Thank you.

Can you provide some more details and/or screenshots?
I'm not sure exactly what you mean here: "I cannot add domain account as a preferred credential to connect to windows"
Are you in the Agent preferred credentials page? What is the error?

I can't connect to X-box live anymore! Help please!

I've had xbox live since Sunday and it's worked fine since then. I'm using a Linksys WRT54G with Microsoft's own wireless adapter. When I first got it hooked up, I was using WEP and the xbox live lady on the phone told me to use my phone number for that code and it connected right away after some power cycling. Well, this morning I went to connect and it wasn't working at all. It get's to the IP address and fails. I called xbox live on the phone again and they told me to use a WPA code that I got off my computer. So after half and hour and more power cycling, it connected and after I hung up the phone with the lady, it became unconnected again. Ok, obviously I'm not the smartest person when it comes to this stuff so I REALLY need some guidance on how I should do this. Should I be using WEP or WPA and why can't I stay connected?

Acces setup page of router .....
Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live.

Can i connect to the ethernet cable on a 2nd airport express

i have a wireless network setup from my cable box with an airport express (thru ethernet, of course).
i have a SECOND AE extending the network.
can i connect my roku box to the 2nd AE's ethernet port? will it make any difference? (as opposed to the roku box, used for netflix, picking up it's signal wirelessly).
trying to make this work as best i can, since my TV is not close to the internet connection...

can i connect my roku box to the 2nd AE's ethernet port?
Yes
will it make any difference? (as opposed to the roku box, used for netflix, picking up it's signal wirelessly).
Probably not, since the AirPort Express is picking up its signal via wireless.
The same signal just appears at the Ethernet port. If anything, the signal at the Ethernet port will have a bit less bandwidth than the wireless signal since the Express must convert from wireless to Ethernet...and you always lose something in the conversion process.
Normally, you would use the Ethernet port if a device did not have wireless capability.

Can't Connect Windows XP box to TC

Similar Messages

Maybe you are looking for