Can't connect wirelessly to the Internet

Hi all,
hope someone can help me with this.
I'm running OSX 10.3.9, have an ADSL Nation X-Modem and AirPort Express.
My wireless network is up and running, I have strong signal and AirTunes can connect and play fine wirelessly.
However, when I try to open Safari and connect to the Internet, it doesn't connect ("Can't find Server.")
When I plug the X-Modem direct into the Mac with the Ethernet cable, I can connect to the internet fine, so the modem and cable don't seem to be the problem. I've tried running throgh the AirPort Express SetUp Assistant and restarted AirPort and rebooted everything many times. In Network Preferences, it says it's happily connected, has IP address etc, but I still can't connect wirelessly to the Internet?
Any help greatly appreciated!
thanks
Nat

OK, here it is again
First you plug the Ethernet cable from your Internet modem into the AE. Then plug it in. The light will go amber. Run the Airport Setup Assistant. Create a new wireless network. Call it what you want. Enter the information about your modem, in the fields just like you do for your Ethernet connection on your PC or Mac. This means DHCP or static IP and subnet..... most if you use DHCP will be filled in for you. Now that you have saved the info and the AE has restarted, look for the network that you named in the available networks. If you have set it up to dish out IP addresses, it will give you one. If you have started out with WEP or WPA the connection process is much more difficult at first.
I leave it wide open until I can connect to it and then I create MAC access lists. I'll leave all the security stuff to you after you get it working basically.
Run Airport Admin Utility. It will scan the area for AEs and AEBSs and you can select yours from the list. Click on configure. Here is where you set all the details up on how you want it to work. Here you can configure the details, place your securities etc. Notice that you are accessing it wireless and then you can go through the various Tabs to configure how you want it to operate.
There is an Internet tab. This will show you how it is configured. It should look the same as your NIC parameters did when you hooked straight to the modem. There are also many more tabs that allow you to configure each area, like do you want it to be the gateway of your network, dish out IP addresses etc. My advice is to let it do that if more than one machine will connect and you don't require defined addresses to get to say a server.
The two important areas are the Internet and the LAN area. These tell it how to interact with your modem, and the machines trying to connect to it. If the AE doesn't see the modem or can't interact with it, one of the parameters is wrong. Same goes for the LAN side of things.
Michael

Similar Messages

I can't seem to connect wireless to the internet | WLAN module malfunctioning | Network Drivers

I am getting an error within my Chrome browser that says, "this webpage is not available". This error only occurs when I try to use the wifi mode. Everything is fine when I plug in the RJ45 cable/ethernet cable directly to my notebook.
The wifi button/F12 seems to operate properly. The orange and white led turn on and off to indicate it's state.
I should mention that I recently removed the WLAN module and then replaced it after a 90 minute removal and replacement of my HD with that of a new Seagate 1TB SSHD (solid state hybrid drive).
The notebook operates a lot faster now, expecially my adobe softwares like Premiere CC and Photoshop CC. However I can't do anything wirelessly with the internet now!
Need help ASAP >_<
Attached below are screenshots of the device manage error notification and an error message from Chrome.

Hi there @Bcfilms,
I understand that you have been having some trouble with your wireless connection, since replacing the hard drive with an SSD drive.
Did you update your WiFI driver from the support page for your notebook? HP ENVY m4-1115dx Notebook PC
When you try using a wifi connection, can you see available wireless networks?
If so, will it connect without an error?
Have you tried a different browser if your are able to connect to wireless networks?
The following pages are helpful when troubleshooting wireless connectivity issues.
Troubleshooting wireless network and Internet (Windows 8)
Also, you can look at the power management for your wireless adapter:
Disable the Power Off option for the adapter:
1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)
2. Expand the Network adapters.
3. Right click on the Ethernet/Wireless Adapter and click Properties.
4. Click the Power Management tab.
5. Remove the check mark beside Allow the computer to turn off this device to save power.
6. Click OK.
7. Test.
Forget the network: (Windows 8)
1. Press Windows Key + C
2. Click Settings.
3. Click Change PC settings.
4. Click Network on the left.
5. Click Manage known networks.
6. Click the network name.
7. Click Forget.
Reset the TCP/IP settings on your PC:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.
4. Restart your PC and test.
It may also help to reset the winsock catalogue:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh winsock reset" without quotes, and press enter.
4. Restart your PC and test.
Reinstall the network adapter drivers:
1. Download the drivers from here but do not run them yet.
2. Go to your start screen/menu and type Device Manager.
3. Expand Network adapters.
4. Right click on the wireless adapter and choose Uninstall.
5. Run the downloaded drivers from step 1.
6. Restart your PC and test.
Test another connection:
Many people rule out their home network as an issue if another device is working on the same network. Networking is not that simple. Each device interacts differently with your router or modem and it is impossible to rule out settings in that device until the notebook has been tested on another network.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Unable to connect wirelessly to the Internet

I have a Linksys WAG200G connected via ethernet cable to an Apple Base Station.
I can connect wirelessly to the Base Station (as it appears in the Airport Menu Bar) but I'm unable to connect to the Internet.
I can, however, connect to the Internet via my iPhone so it must be something to with the MBP.
I've run disk permissions but still nothing. I've also attempted to connect wirelessly direct to the Linksys Router and that also works okay.

Why do you need the Apple Base Station? The WAG200G is a modem/router. Just connect to it and you should be able to connect to the internet. Connecting to 2 routers has them fighting for giving out IP addresses. Yes you can connect to both but you must disable one of them in their function to provide IP addresses.

I have an ipod touch 4g. I want to use our internet hdtv as a monitor so others can see my screen in 40". Sony guy said that can do it wirelessly through the internet router instead of Hdmi without the need for an apple tv.Is this true and how do I do it?

As I said above, I want to view my iPod screen on our new 40" Sony Internet full HD TV.
I know that you can do this via HDMI but a Sony guy said that you should be able to do this wirelessly by going through the router. Is this true and can I do this without the need for the Apple TV?
We are soon going to get the airport extreme, so will it work with that?

1. Is it a smart TV?
2. If so.... Is the TV connected to the Internet?
3. If it is.... Check if your iPod and your TV share the same IP address (Wi-Fi network)
4. If they do.... Then you should go to wherever your "Other Media" tab is.
5. After that.... Search for you iPod. Because it is connected to the same network, it should recognize the device they same way AirPrint does.
6. If you happen to see this fail, then try this method:
1. Do you have a Bluetooth-enabled computer/laptop?
2. If so.... Enable the bluetooth on the computer/laptop as well as your iPod.
3. After that.... Your iPod should be actively searching and it should find the computer/laptop.
4. If it did.... Transfer the file onto Windows/Mac (preferably Mac) and find the program to open the file.
5. After doing so.... Connect your computer/laptop to the TV via HDMI Output Cable.
6. Now it should work!

Problem connecting wirelessly to the internet WRT54G

I'm having strange issues with my wrt54g router - as long as my computers are plugged into it through ethernet, I have no problem accessing the internet. However, I can't access the internet if I connect to the router using wireless (my computers can connect to the router itself wirelessly, just can't access the internet from it). I've had this router for a little under a year and it used to work fine. Then I stopped using it for a few months, forgot my password and had to hit the reset button when I wanted to set it back up again yesterday. I've tried connecting multiple computers to it wirelessly, including the old one that used to work with it, but none of them can access the internet.
I'm really not sure what could be wrong. Do I need to reinstall the router software that came with the router itself (though I'm not sure how this can help..)? Or is there some button/setting on the router that allows it to access the internet that I could have missed? I checked and wireless is enabled under wireless settings.
I'm running Vista on one computer and XP on another.

Connect the XP computer to the router at Ethernet Port ....
Reset the router for 20-30 seconds ....
Run the Disc for the setup wizard
Let me know if any other problem occurs...

UGH! Help!New Mac owner and I'm about to throw it out the window! Won't stay connected wirelessly to the internet.

I purchased a MacBook Pro 13":
Processor 2.8 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Software Mac OS X Lion 10.7.3 (11D50b)
I have AT&T DSL with the 2wire wireless connected directly to the dsl line. There is no base computer. I owned a netbook prior to this and had several people use there pc laptops wirelessly before. Now I can't seem to get my Mac to stay connected wirelessly. My iPhone 4, touch and satalite still maintain perfect wireless connection as they did before. I called apple , they said it was my internet, I called AT&T they said it was the Mac. I have a similar post on AT&T, hopefully someone can help! This is NOT how I wanted my first Mac experience to go!!! It is vital I stay connected because I remote in to work constantly and can not be interrupted. Someone PLEASE help!!

Recommended settings for Wi-Fi routers and access points
Troubleshooting Wi-Fi issues
Potential sources of wireless interference

My iPod was stolen last week. Its offline, not connected to internet and I don't know what to do! And I can't connect it to the internet to find it because, once again, it was stolen! Please help!

I got this for Christmas and its one of the only convient ways to communicate with my aunt who is currently living in another country! Someone stole it and its not connected to wifi or online. This happened last week and I just got it 2 weeks ago but I didn't know what to do then...I never installed any app for tracking or anything like that and I can't afford a new one! Even with the discount! Someone please help me.

Sorry, but if you didn't set up Find My iPod, and/or the iPod is not turned on or otherwise connected to the Internet, there's no way to track it nor affect it in any way. Notify the police and change the password to your Apple ID and any other applicable online services.
Regards.

One NIC host - can I connect VMs to the Internet?

Hello everybody,
probably you've seen this before, but I haven't had any success in finding the right answer.
Question is, can I connect the VMs, living on a host with a single physical NIC, to the Internet?
I need to set up 3 VMs (same LAN) to connect to the Internet through the host, but the host has only one physical NIC.
Is it possible?

Yes. A single nic can share host and vm traffic.
We have our servers set up with a single nic (in our case, a virtual nic that represents a team of 2 nics) which shares vm and host traffic.
Edit: Sorry, I did forget the multiple vm part. Akshay is right, we have many vms sharing a single external virtual switch. You will also need to make sure "allow management operating system to share this network" is checked so the
host can access the network.

Can not connect itunes to the internet!

I have a LAN connection, I have allowed itunes through the firewall, I ran the network connectivity test and it said network connection timed out and it never successfully connected to the internet. I'm not very good with computers, and could really use some help!
Thanks!

Try this:
Head to your Start Menu
Then click Control Panel located in the right hand menu part.
Then look for Network & Internet and click on that.
Then you want to click on Internet settings
Next, head over to the "Connections" tab
From there, click LAN Settings at the bottom.
Make sure, try putting a check mark next to the "Automatically detect settings" or remove it and hit Apply and then try reconnecting to the store.
If that doesn't help, try flushing the DNS. Instructions on how to do this can be found in the Apple document below. Hope this helps.
http://support.apple.com/kb/HT1527
B-rock

Is Internet Explorer incompatible with Airport Extreme for connecting wirelessly to the Internet?

repeat -is Internet Explorer incompatible with Airport Extreme for connecting to the Internet- I am trying to hook up my sister's / Windows 7...HP mini computer to my wireless connection (Airport Extreme to cable /BrightHouse ) all I get is -failed due to 'error 651' -am about to call the jockeys at the cable company to see if they have work-around. Any comment appreciate. Thanks./jimiros

Diane,
I have added very few apps to my G5. The majority of my time is spent editing photos with PhotoshopCS3. I have software updates set to run weekly and have always kept them up to date. I really believe it's a disk permissions issue...but repairing them doesn't help.
*+Upon installation, I used Archive and Install.+* While I agree that Erase and Install may sound like a good idea, it makes me nervous. I do have everything backed up on a bootable CMS drive, but I'm a photographer and was hoping to not have to erase the G5.
Yes, as I mentioned in the original post, I've downloaded and installed the Airport firmware update. And all software is up to date.
All was working just dandy before the upgrade. Unfortunately now it's sounding like I may have to erase my hard drive and install fresh.
If I do that, is it just a matter then of dragging my photos from the backup disk to the G5? And documents? Etc?? The thought of getting all my photos and important information back on the G5 seems a bit staggering.

Connect Macbook to the Internet (VPN) through PC

I got a PC with 2 network cards and a Macbook.
On a PC I got VPN connection to my provider.
How can I connect Macbook to the internet through that PC + safely sharing my PC's contents only to my Macbook.

I did all that. My question concerns more the software than the hardware. I already said that I have 2 newtork cards in a PC desktop and one in macbook. I got cables. I plugged everything in.
The problem is that the preparation work is described in so many details but the crucial program work is very unclear in the majority of web sites I googled. I need this part.

I have an iMac G4 and need to connect it to the internet. Do I need to buy an airport card or can I just use a normal USB wifi stick?

I have an iMac G4 and need to connect it to the internet. Do I need to buy an airport card or can I just use a normal USB wifi stick?

Will this need to be a special mac compatible one or will they all be fine?
You need to see "works on Mac" on the box. All such deveices require a driver. The adaptor would work in many cases except for the lack of Mac drivers. Some companies have the proper Mac drivers on their web sites, some shuffle you off to suspect third-party sites, and some have no Mac drivers at all. If you want to buy one adaptor, not have to return it or send hours searcing the web for a driver that works, look at this one:
http://eshop.macsales.com/item/Newer%20Technology/MXP2802NU2C/
It is best for iMacs with USB 2.0 ports. If you have only USB 1.1 ports, you can save money with this one:
Newer Technology MAXPower 802.11g/b Wireless USB 2.0 Stick Adapter Share, Surf, & Stream Anywhere!

My airport express frequently drops the internet connection. Once I unplug it and re-plug it in, everything is fine until it drops the signal again. This happens on a regular basis. Is there anything I can do ensure it maintains the internet connection?

My airport express frequently drops the internet connection. Once I unplug it, and re-plug it in, my Macbook Pro17,IMac 24, iPad air and my wife's Acer 15 works fine until it drops the signal again. This happens on a regular basis. Is there anything I can do ensure it maintains the internet connection?

It is tricky..
But yes it can be done as long as you use a different IP subnet to what is being used for the internet..
So I need to know what modem router you have?? Does it have wireless as that would make it very easy?
What IP is the computer getting?
Then I can give you the details to setup wireless statically on a different subnet.

My Safari Icon ( Button) is missing in my iMac after I downloaded a update. How can I get the icon back on my desktop and connecting again to the Internet ?...

My Safari Icon ( Button) is missing on my iMac after I downloaded a update. How can I get the icon (Button Safari) back on my desktop and connecting again to the Internet ?...
Thanks for the help

Often when people think they've deleted an application, what's really happened is that they deleted its icon from the Dock. In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. If the application is in that folder, drag it to the Dock (not to the Desktop or anywhere else.) The other Dock icons will move out of the way to make a place for it.

Can any1 help me fix my internet connection on the facebook app it says there is no connection for the news feed but i can do everything else on the internet

can any1 help me with the internet on my iphone 3gs it says no connection on the facebook news feed but all the other internet stuff works

Contact the develpers of that app, which is not an Apple product for support. You can find the developer contact info in the description of that app in the App Store or Google it.

Can't connect wirelessly to the Internet

Similar Messages

Maybe you are looking for