Can't connect with modem through e2500 router

I have an old Speedstream 5100 modem hooked to my e2500 router. Everything works well except if for some reason my modem disconnects from ISP I can not log into it through the route to reconnect it. I must plug a direct cable into modem from computer run connect script then plug modem back into router all is fine again.
Any ideas why connecting to modem through router is blocked?
Thnaks,
Al
Solved!
Go to Solution.

al_mathews wrote:
My Speedstream only has one Ethernet connection so I didn't realize that it looked like a router to the local network. I changed the mode to bridge on the Speedstream and setup PPoE on e2500 and reconnected to ISP on e2500 setup screen. That may solve the problem of reconnecting since now it is managed on the e2500.
One thing I now see is since I left the modem IP set to 192.168.0.X I can't get to it at all through the e2500. Is that because my DHCP in e2500 is setup with 192.168.1.X IP range so modem isn't addressed in my network? If I hook directly to Speedstream and change IP to 192.168.1.X will it become visible on local network?
You cannot access the modem anymore while you have an active PPPoE connection. For PPPoE the E2500 won't need an IP address from the modem thus it doesn't do DHCP on the WAN port and thus it never sees it. When you try to access 192.168.0.* addresses the E2500 will route it through the PPP tunnel to the ISP.
If you hook your computer directly to the SpeedStream it should automatically pick up a DHCP address (assuming the computer is still running on DHCP and not with a static IP and the SpeedStream does not automatically disable the DHCP server in bridge mode). If you have set up a static IP on the computer you have to change the IP address to a 192.168.0.* address.

Similar Messages

  • Can't connect to internet through netgear95 router

    Can't connect to the internet through a netgear95 router.  my PC connects to internet ok, none of my apple stuff (iphone/ ipad) will connect though.  Must be something in settings on router.
    Scott

    Hi Scott,
    Do you have any Wireless devices that connect to the router? I'm assuming that your PC may connect via Ethernet cable?
    Regards
    Steve

  • Iphone 3 and 4 can't connect with wireless through air port

    We purchased a new Time Capsule yesterday to replace one that stopped working.  We have been able to get the Air Port/network working for our Mac Books and iPads, but cannot access the wireless network on our iPhones (a 3 and a 4).  The wireless connection function on the phones show the network and shows a check mark next to the network, but does not switch to the wireless network from 3G.  We tried to 'forget the network' and sign in again, making sure we are on the WPA2.  Any other suggestions?   Tami

    I had this happen to me yesterday.  I have a AirPort Extreme and my iPhone was unable to connect to the wireless network.
    I tried everything from resetting the network settings on my iPhone, Hardbooting the iPhone,  and even changing the wireless password on my Wireless network and restarting the AirPort Extreme.  Nothing worked.
    However here is my solution:
    Hardware restart.  I just unplugged the AE waited about 20 seconds and plugged it back in.  When it came back up ...My iPhone was able to connect to the network. 

  • I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

    I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

  • TS1368 I can't connect to iStores through iTunes on my Windows Xp machine. Everything is updated and I am getting message: We could not complete you iTunes Store request. An unknown error occurred (-1202). Any suggestions??

    I can't connect to iStores through iTunes on my Windows Xp machine. Everything is updated and I am getting message: We could not complete you iTunes Store request. An unknown error occurred (-1202). Any suggestions??

    I have the same problem PLUS I get the "Genius is temporarily unable to show you related music..." whenever I select a song. This occurs even when I log in as Administrator. Updating to 8.0.1 did not fix either problem.
    I can access the iTunes Store and download music. Genius had no problems uploading my iTunes Library info, and it can create playlists for selected songs. I believe this rules out communications and authorization problems. I have a G4 Mac Mini, a G5 PowerPC, and an Intel iMac with the same problem, so it's unlikely to be a Mac hardware issue. A firewall problem was unlikely (since I can access the iTunes Store), but I tested this with the firewall off. Both problems still remained. Updating Genius, turning Genius off and then on again, reinstalling iTunes 8, updating to 10.5.5, etc. did not work.
    The only unusual factor is that I have HughesNet satellite 'broadband.' I cannot see how that would matter, but perhaps the individual song iTunes Store and Genius features don't get along with something in my HughesNet 'modem.' Any ideas from other users?

  • Can't connect to Facebook through WiFi - Lumina 92...

    Both my teenagers have just had upgrades to Nokia Lumina's at the weekend, from an HTC and a Huawei. Both phones are WM8 and both have the Amber update pre-installed.
    Unfortunately neither phone can connect with Facebook through the Wi-Fi but CAN connect through 3G. As both tariffs are on low monthly data usage, you can begin to imagine the annoyance they are displaying at having to switch off Wi-Fi just to make Facebook sync.
    Everything else works fine and I have trawled through numerous web pages and tried everything imaginable to get this to work, but no luck.
    If anybody else has had similar problems across their Wi-Fi, please can you share the solution and help restore some peace back to our household.
    Alas, both the previous WM8 phones worked flawlessly and my ancient HTC HD7 also works without a blip.

    Hi Squirrel23,
    Welcome to the Nokia forum.
    Are you using a Facebook app or you've setup your account via E-mail+accounts? Is this happening to just one specific Wi-Fi connection? Have you tried to connect to other Wi-Fi? Have you tried rebooting your phone? ^AR

  • I can't connect with Turkey!

    Hi! I have a problem. I'm from Poland and can't connect with my friend from Turkey using Skype. It's strange coz she is the only one from my friends with whom i can't establish connection. And she is from Turkey. I talked to people from US, South Africa and other remote countries but I can't establish connection with Turkey! And i'm from Poland. Does Turkey block connection from Poland? She has the same problem. She can't connect only with me - she talks to people from all over the world expect me. Can you help me?
    Solved!
    Go to Solution.

    muskagap wrote:
    Oh, sorry, it's Marocco not Turkey
    tell your friend to connect Skype through a proxy server:
    http://community.skype.com/t5/Windows/Unblock-Skype-in-Oman/m-p/905294
    Regards,
    Tamim
    Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
    If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

  • HT1369 why is my ipod can not connect with the i tunes store and can not sync

    Dear apple,
    Please kindly help me because my ipod can not connect with the i tunes store and can not sync either

    Follow through: iTunes for Windows: Device Connectivity Tests
    That link, also contains other links that may be related to your problem and/or to your solution.
    Hope this helps.

  • I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too

    I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards

    ErolSinan wrote:
    ... there is no button for update between the About and Usage buttons in the General. ...
    Correct. That is only a feature of iOS 5 or later...
    ErolSinan wrote:
    ... yes my phone is 3G.
    then it can only go as far as iOS 4.2.1

  • How many apple tv can I connect with one account?

    how many apple tv can I connect with one account?

    there are 2 recent posts that suggest issues over 5, one where someone was trying to troubleshoot for a friend or client as they couldn't keep more than 5 connected, and the other where somone had more than 5 but was using 2 separate itunes libraries to share the load - not sure if that was with the same or differing AppleIDs.
    I guess there is always the possibility that things kight vary from one itunes version to the next even unintentionally to allow more.
    AC

  • I can't connect with using connector

    Hi,
    I want to create a system(Solman 4.0) in Portal.I have created a SAP system using dedicated application server and then I filled all necessary fields.I tested with using system connection test.There are two test nameS(SAP Web AS Connection and Connection test for Connectors)Firstly, I checked WAS Connection and everything was ok but when I tested "Connection Test for Connectors" it didn't work.When I clicked test button, it said "Connection failed. Make sure user mapping is set correctly and all connection properties are correct" but I didn't use UIDPW.I used the Logon Ticket method and system_type is SAP_CRM but when I checked log file, it said this message "(R3/BW) Failed to get connection. Please contact your admin".I didin't understand because I have already used SAP_CRM syte sytem type.Why do I get this message. In addition, The ume.usermapping.unsecure is already on TRUE.In short, I can't connect with using connector.What's the problem?

    Hi Vijith,
    I perform your suggestion and I got an error message.This error message is written below.
    Exception in SAP Application Integrator occured: Unable to parse template '<System.ConnectionString>'; the problem occured at position 0. Cannot process expression <System.ConnectionString> because Invalid System Attribute: System: &#39;SAP_LocalSystem&#39;, Attribute: &#39;ConnectionString&#39;. .
    There is a connection string error but I didn't use by using connection string method.I have used by using dedicated application server. At the same time, I have another error message in the dev_jrfc.trc.This error message is as fallows
    Error> occured  >Mon May 07 09:18:37,334<    >RfcGetException rc (7) message: The system is unable to interpret the SSO ticket received
    <RfcGetException
    What's your comment?

  • Can I connect with more than one iTunes acct

    Can I connect with more than one iTunes acct

    Laxman25 wrote:
    If its multiple apple id's on one computer you can't because you have to log out of one and login on another.
    I've only got one ID so I can't test but Winston says you can be signed into iTunes with multiple AppleIDs (i.e authorise iTunes for more than one ID content) at the same time, and that even different account content will stream so long as Home Sharing ID in iTunes matches AppleTV Home Sharing ID.
    AC

  • TNSping ok..can't connect with sqlPlus ...just stopped working

    Hey Guys,
    I have an Oracle Server running for the last year with little issues.
    The lister just stopped working...
    I can TNSPing ok...I just can't connect with toad or sqlplus anymore from another computer..
    I can connect with sqlplus on the same computer...just not from any other computers.
    =================================================================
    C:\Documents and Settings\Phil>tnsping elvis 5
    TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 17-JUL-2008 11:10:28
    Copyright (c) 1997, 2003, Oracle. All rights reserved.
    Used parameter files:
    C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=7.7.1.1)(PORT=1521))(CONNECT_DATA=(SID=orcl)))
    OK (70 msec)
    OK (40 msec)
    OK (50 msec)
    OK (50 msec)
    OK (40 msec)
    C:\Documents and Settings\Phil>
    ==================================================
    Listener status info
    ================================================
    LSNRCTL>
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.1.0.4.0 - Production
    Start Date 17-JUL-2008 10:45:26
    Uptime 0 days 0 hr. 29 min. 2 sec
    Trace Level off
    Security ON: Password or Local OS Authentication
    SNMP OFF
    Listener Parameter File D:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
    Listener Log File D:\oracle\product\10.1.0\Db_1\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=2100))(Presentation=FTP)(Session=RAW))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orcl" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfully
    LSNRCTL>
    LSNRCTL>
    LSNRCTL>
    LSNRCTL>
    ==================================================
    Listener.ora
    # listener.ora Network Configuration File: D:\oracle\product\10.1.0\Db_1\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
    ====================================================================
    sqlnet.ora
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    ====================================================================
    tnsnames.ora
    ORCL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = orcl)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    =============================================================================
    I am getting this error from sqlnet.log
    Fatal NI connect error 12638, connecting to:
    (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
    VERSION INFORMATION:
    TNS for 32-bit Windows: Version 10.1.0.4.0 - Production
    Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.4.0 - Production
    Time: 17-JUL-2008 10:23:14
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12638
    TNS-12638: Credential retrieval failed
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0

    LSNRCTL>
    LSNRCTL> services
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=elvis)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Service "orcl" has 2 instance(s).
    Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:18 refused:0 state:ready
    LOCAL SERVER
    Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 current:0 max:1002 state:ready
    DISPATCHER <machine: ELVIS, pid: 2284>
    (ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1027))
    The command completed successfully
    LSNRCTL>

  • Can I connect with Database using Session Bean

    Hi,
    I am new to EJB. I have small doubt.
    can I connect with Database using Session Bean.
    Regards,
    Murali.

    Double post of http://forum.java.sun.com/thread.jspa?threadID=687239&tstart=0

  • After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK.

    After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK. Any tips on how to fix much appreciated!

    From the Mail menu bar, select
    Window ▹ Connection Doctor
    Click the Show Detail button. A drawer opens. Try to send a message and post the text that appears. Anonymize any personal information before posting.

Maybe you are looking for