Can't connect with Windows Jabber client

Dual environment with Xserve authenticating to Active Directory domain controller. iChat is setup and is working for Mac users using Adium and iChat. However I cannot get any Jabber clients for Windows to authenticate. Both Pidgin and Psi error - "Authentication failed - no mechanism available".
All accounts are Active Directory accounts (Mac & Windows).

Hello again.
Try this. Stop the iChat Server. Using a text editor edit the file /etc/jabberd/c2s.xml Look for the section that talks about <mechanisms> Disable ( comment out thus <!-- and --!> ) all apart from <cram-md5/> for and <digest-md5/> and restart iChat server again.
As you gathered - forward and reverse DNS's have to be correct.
Tim

Similar Messages

Trouble in connecting with windows xp client

Hi I am using windows 2008 r2 enterprise server. Actually I have downgraded 2012 licence to 2008.
I have configured it for PEAP-MSCHAPV2 using NPS and active directory. But windows xp wireless client is unable to connect with PEAP or TLS.
I got the log as "unable to process the eap type".
Is there any issue with the certificates or configuration?
Please assist me about the configuration of windows 2008 r2 enterprise server for TLS and PEAP-MSCHAPv2 and configuration of windows xp wireless client so that the connection is successful.
Assist me on how to configure certificates in server and client side.
Thank u in advance
Goutham M S

Hi,
Have you installed the certificate on the client computer? If you designate a certificate that is not installed on client computers, authentication will fail. For more detailed information about EAP, you can view the link blow.
Extensible Authentication Protocol (EAP) Settings for Network Access
http://technet.microsoft.com/en-us/library/hh945104.aspx
Hope this helps.
Steven Lee
TechNet Community Support

Can I connect with a 9i Client-Installation to a Linux 8.1.7 or Windows 8.1.5 ?

Hallo,
we have never installed a oracle-client before. Is it usefull to install a 9i Windows-Client to access our Oracle 8.1.7 Database on a Linux-Server and the Oracle 8.1.5 Database on the Win-NT server. Do I need more than the 9i-Client for Windows which is free on download for testing?
Thanks for your help.
Marion Mahr

Sorry, this page was not found. (ErrorDocument 404)

ORA-03135 connecting with Windows 7 via VPN

Can you please help me.
I am unable to connect with Windows 7 clients (x32 also x64) to a database 10.2.0.5 running on a Windows 2008 R2 x64 Server
Oracle Client Version: 10.2.0.3
always raises an ORA-03135 error!!!
But with a Windows XP Clients (same Oracle Client Settings) its working without problems. No connections problems!
We use a SonicWall Firewall where all Traffic (SQLNET,..) is allowed for testing!
CLIENT: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
SERVER: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
Some Trace Infos:
Oracle Client:
(1256) [25-NOV-2010 11:23:38:997] ntt2err: entry
(1256) [25-NOV-2010 11:23:38:997] ntt2err: soc 1992 error - operation=5, ntresnt[0]=517, ntresnt[1]=54, ntresnt[2]=0
(1256) [25-NOV-2010 11:23:38:997] ntt2err: exit
(1256) [25-NOV-2010 11:23:38:997] nttrd: exit
(1256) [25-NOV-2010 11:23:38:997] nsprecv: error exit
(1256) [25-NOV-2010 11:23:38:997] nserror: entry
(1256) [25-NOV-2010 11:23:38:997] nserror: nsres: id=0, op=68, ns=12547, ns2=12560; nt[0]=517, nt[1]=54, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
(1256) [25-NOV-2010 11:23:38:997] nsrdr: error exit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: nsctxrnk=0
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: error exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: wanted 1 got 0, type 0
(1256) [25-NOV-2010 11:23:38:998] nioqper: error from nioqrc
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns main err code: 12547
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns (2) err code: 12560
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt main err code: 517
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt (2) err code: 54
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt OS err code: 0
(1256) [25-NOV-2010 11:23:38:998] nioqer: entry
(1256) [25-NOV-2010 11:23:38:998] nioqer: incoming err = 12151
(1256) [25-NOV-2010 11:23:38:998] nioqce: entry
(1256) [25-NOV-2010 11:23:38:998] nioqce: exit
(1256) [25-NOV-2010 11:23:38:998] nioqer: returning err = 3135
(1256) [25-NOV-2010 11:23:38:998] nioqer: exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: exit
(1256) [25-NOV-2010 11:23:38:998] nioqds: entry
(1256) [25-NOV-2010 11:23:38:998] nioqds: disconnecting...
(1256) [25-NOV-2010 11:23:38:999] nsclose: entry
Server Traces:
nttrd: socket 4172 had bytes read=0
nttrd: exit
nsprecv: error exit
nserror: entry
nserror: nsres: id=0, op=68, ns=12535, ns2=12560; nt[0]=505, nt[1]=60, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsrdr: error exit
nsdo: nsctxrnk=0
nsdo: error exit
nioqrc: wanted 1 got 0, type 0
nioqper: error from nioqrc
nioqper: ns main err code: 12535
nioqper: ns (2) err code: 12560
nioqper: nt main err code: 505
nioqper: nt (2) err code: 60
nioqper: nt OS err code: 0
nioqer: entry
nioqer: incoming err = 12151
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
Thx

always raises an ORA-03135 error!!!
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
ThxThis is network related problem,may be network very slow.When error occur then execute tnsping <netservicename> command and see that happen.

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

Possible to have 2 lines on mac or windows jabber client? I can do this on the iPhone client.

Possible to have 2 lines on mac or windows jabber client? I can do this on the iPhone client.

No, they can only have 1 line.

How to run import from Unix Oracle 8.0.5 database with Windows Oracle client?

How to run import from Unix Oracle 8.0.5 database via network with Windows Oracle client? Is it possible? When I try to do it Oracle client just hangs... If not which ones are compatible Aix or Solaris to Unix or it must be a Unix client to connect to Unix Oracle database. Thank's for any help.

Hi,
In our project we are using this type. Since in this project server in UNIX(DEC) and client is running on windows. We have created a listener which always listen requests from client and doing the according to the request.
Step1. create a request table, where u are inserting ur request.
step2. create PRO*C proram, which is listening request on the table. If there is any request, call the imp (executable). This is happening on server side.
Benifit. U can make a request from cleint and ftp the file client sit.
Are u interested in more details and code, pls send a mail to me
---- Boby Jose Thekkanath
[email protected]
Dharma Computers(p) Ltd. Bangalore.
null

Roaming Profile Not Syncing with Windows XP Clients

I'm running an XServe with 10.4.8 as a PDC, with some XP systems authenticating to it. I don't have problems logging in or viewing the user's profile, but any files saved to the desktop are no longer accessible at the next login. If I create a file and store it in the user's profile desktop directory on the file server, the file does appear on the desktop the next time the user logs in. The profiles are stored on a Linux server running SMB, as are the home directories, which work fine. I'm not sure where to be looking to solve this.

Beginning with Windows XP SP2, Microsoft has disabled Basic authentication by default in an effort to increase security. Unfortunately their Digest authentication is broken so you can't connect using that authentication scheme either.
The following link shows you how to edit the registry to add a key in Windows XP to enable Basic authentication which will allow you to connect a Windows XP client to a Mac OS X Server using WebDAV.
http://www.microsoft.com/technet/prodtechnol/winxppro/maintain/sp2netwk.mspx#EIN AE
From that page:
You can enable BasicAuth by adding the following registry key and setting it to a non-zero value:
HKEYLOCALMACHINE\SYSTEM
\CurrentControlSet\Services \WebClient\Parameters\UseBasicAuth (DWORD)
To restore the default behaviour:
If you delete the registry key or set it to 0, the behavior reverts to the default, or disabling the use of BasicAuth.

Cisco Jabber for Windows , Jabber Client for non AD PC

Hi
We have intalled and integrated sucessfully with CUPS and CUCM. users can able to log to Jabber client. But the Clients are not In AD(Active Directory), But the users should be able to seach contacts from AD, how can I do this using jabber-config.xml file , can you please anyone share a sample file for this requirement ?
Regds
$

The deplyment guide explains how to configure he .xml file section by section, theres one dedicated to directory, have you reviewed it?? If not, that should be your first step. Its not that different from CUCM ldap integration
Sent from Cisco Technical Support iPad App

Outlook can't connect with Exchange 2013 after migration from Exchange 2007

<style type="text/css">P { margin-bottom: 0.21cm; }</style>
Hello,
recently we've done a Exchange 2007 sp3 to 2013 sp1. Users can conect perfectly with OWA and with his iphone clients.
But the problem is they can't connect from his Outlook clients (2010, 2013), both internaly and externaly. Always fails with the message: The Connection to Exchange it is not avaliable.... Can't resolve the name of Exchange server.
To try to resolve it we've done:
- Check Outlook anywhere configuration en EAC: it is configure with and external url mail.company.com and internal server.domain.local. The security is the default Negociation, but we've tried all.
- Check the internal dns, there are records for mail.company.com and exchangeserverdomain.local pointing to the exchange local ip. Also there is a public zone company.com with the record mail.caompany.com pointing to the exchange local ip. Also we've made
records autodiscover.company.com and autodiscover.domain.local pointing to the exchange local ip.
- In the public dns from our domain there is the record A and MX pointing our public ip. There aren't any record Autodiscover but we think that the manial conection should work.
Check certificates: we've made a new self-signed certificate including all this internal and external domains and for all services.
- Check Outlook Anywhere block: we've cheked.
Currently server state:
- Old Exchange 07 server can't start, it was in very bad state and we achieved migrate the mailbox to the new server, after that we tried to uninstall, but it crashes with a public folder replication error. We got uninstall all the roles
unless the mailbox. After a restart it can't start.
-The new Exchange 2013 looks great, there isn't any trail of the old server, or we haven't seen anything in the EAC or shell.
I paste below the result of Microsoft Remote conectivity analaizer, with Outlook anywhere test. It is clear that there is a problem with that.
Sorry because the test is in spanish and I translated it with google, from here I only can access the tool in spanish.
We continue to try to resolve the problem.
Thanks to all in advance!
Testing RPC / HTTP connectivity.
Error in testing RPC / HTTP.
additional Details
Elapsed time: 24295 ms.
Test steps
Connectivity Analyzer Microsoft is trying to test Autodiscover for [email protected] .
Error in automatic detection test .
additional Details
Elapsed time: 24294 ms.
Test steps
Attempting each method of contacting the Autodiscover service .
Failed to properly contact the Autodiscover service using all methods.
additional Details
Elapsed time: 24294 ms.
Test steps
Trying to prove possible Autodiscover URL https://empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 1509 ms.
Test steps
Attempting to resolve the host name in DNS empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 80.36.252.194
Elapsed time: 507 ms.
Testing TCP port 443 on the host to ensure empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 464 ms.
Testing the SSL certificate to make sure it is valid.
The SSL certificate is not exceeded one or more certificate validation checks .
additional Details
Elapsed time: 537 ms.
Test steps
Connectivity Analyzer Microsoft is attempting to obtain the SSL certificate from remote server on port 443 empresa.com .
Connectivity Analyzer Microsoft successfully obtained the remote SSL certificate.
additional Details
Remote Certificate Subject : CN = mail.empresa.com , issuer : CN = mail.empresa.com .
Elapsed time: 454 ms.
Validating the certificate name .
The certificate name was validated successfully .
additional Details
Hostname empresa.com was found at the entrance of the alternative subject name of the certificate.
Elapsed time: 1 ms.
Is validating the trusted certificate .
Validation Error trusted certificate.
Test steps
Connectivity Analyzer Microsoft is trying to build certificate chains for certificate CN = mail.empresa.com .
Could not build a certificate chain for the certificate.
Tell me more about this issue and how to resolve
additional Details
The certificate chain did not end in a trusted root . Root = CN = mail.empresa.com
Elapsed time: 31 ms.
Trying to prove possible Autodiscover URL https://autodiscover.empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 21723 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 498 ms.
Testing TCP port 443 on the host to ensure autodiscover.empresa.com listening or is open.
The specified port is blocked , not listening or does not generate the expected response .
Tell me more about this issue and how to resolve
additional Details
Network Error communicating with the remote host.
Elapsed time: 21224 ms.
Attempting to contact the Autodiscover service with the HTTP redirect method .
Error when trying to contact the Autodiscover HTTP redirect method .
additional Details
Elapsed time: 606 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 14 ms .
Testing TCP port 80 on the host to ensure autodiscover.empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 202 ms.
Connectivity Analyzer Microsoft is checking the automatic detection of host empresa.com for an HTTP redirect to the Autodiscover service.
Connectivity Analyzer Microsoft could not get a HTTP redirect response for Autodiscover .
additional Details
Web exception occurred because an HTTP 404 response was received - Unknown NotFound . Headers received: Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27:58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 +
lenny3 with Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3 HTTP Response Headers : Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27: 58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 + lenny3 with
Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3
Elapsed time: 388 ms.
Attempting to contact the Autodiscover service using the method of DNS SRV redirect server.
Connectivity Analyzer Microsoft could not contact the Autodiscover service using the DNS SRV redirect method .
additional Details
Elapsed time: 186 ms.
Test steps
Trying to find the SRV record in DNS _autodiscover._tcp.empresa.com .
Not the Autodiscover SRV record in DNS found .
Tell me more about this issue and how to resolve
additional Details
Elapsed time: 186 ms.
Checking for a CNAME record for Autodiscover in DNS for your domain " empresa.com " to Office 365.
Could not validate the Autodiscover CNAME record in DNS. If your mailbox is not in Office 365 , you can ignore this warning.
Tell me more about this issue and how to resolve
additional Details
No Autodiscover CNAME record for your domain ' empresa.com ' .
Elapsed time: 268 ms.
jspt

Hello,
We have the Self-signed certificate that comes with Exchange, and we've created a new self-signed including all our domains mail.company.com, domain.local, exchange13.domain.local, autodiscover.company.com, autodiscover.domain.local.
below I print you the result os the comand Get-ClientAccesServer | fl . Now we've configured a SPC objetct folow the instructions of Wizard
Exchange Server Deployment from Microsoft. We've executed the commands in our new Exchange 13, but can't did it in the old Exchange:
$AutodiscoverHostName = "autodiscover.contoso.com"Get-ExchangeServer | Where {($_.AdminDisplayVersion -Like "Version 8*") -And ($_.ServerRole -Like "*ClientAccess*")} | Set-ClientAccessServer -AutoDiscoverServiceInternalUri https://$AutodiscoverHostName/Autodiscover/Autodiscover.xmlThis is the result of
RunspaceId                           : 89c86f8e-d156-4480-b31d-59215976879b
Name                                 : EXCHANGE13
Fqdn                                 : EXCHANGE13.domain.local
ClientAccessArray                    :
OutlookAnywhereEnabled               : True
AutoDiscoverServiceCN                : EXCHANGE13
AutoDiscoverServiceClassName         : ms-Exchange-AutoDiscover-Service
AutoDiscoverServiceInternalUri       : https://autodiscover.company.com/Autodiscover/Autodiscover.xml
AutoDiscoverServiceGuid              : 77378f46-2c66-4aa9-a6a6-3e7a48b19596
AutoDiscoverSiteScope                : {Nombre-predeterminado-primer-sitio}
AlternateServiceAccountConfiguration :
IsOutOfService                       : False
WorkloadManagementPolicy             : DefaultWorkloadManagementPolicy_15.0.825.0
Identity                             : EXCHANGE13
IsValid                              : True
ExchangeVersion                      : 0.1 (8.0.535.0)
DistinguishedName                    : CN=EXCHANGE13,CN=Servers,CN=Exchange Administrative Group
                                       (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=First Organization,CN=Microsoft
                                       Exchange,CN=Services,CN=Configuration,DC=domain,DC=local
Guid                                 : e83055fe-217b-4ed6-9cd0-7711097baf99
ObjectCategory                       : domain.local/Configuration/Schema/ms-Exch-Exchange-Server
ObjectClass                          : {top, server, msExchExchangeServer}
WhenChanged                          : 09/03/2014 12:46:07
WhenCreated                          : 08/03/2014 19:15:54
WhenChangedUTC                       : 09/03/2014 11:46:07
WhenCreatedUTC                       : 08/03/2014 18:15:54
OrganizationId                       :
OriginatingServer                    : severdc.domain.local
ObjectState                          : Unchanged
I hope this stuff can help you.
Thanks!!
jspt

How many apple tv can I connect with one account?

how many apple tv can I connect with one account?

there are 2 recent posts that suggest issues over 5, one where someone was trying to troubleshoot for a friend or client as they couldn't keep more than 5 connected, and the other where somone had more than 5 but was using 2 separate itunes libraries to share the load - not sure if that was with the same or differing AppleIDs.
I guess there is always the possibility that things kight vary from one itunes version to the next even unintentionally to allow more.
AC

Remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed

remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed each time i try to open remote connection to the server,
does remote desktop connection manager V2.2 not compatible with windows 8.1, and if so, is there are any other compatible versions
or what's the problem,
Mahmoud Sabry IT System Engineer

this issue maybe will be fix by latest version, we still waiting for it
maybe your issue can be fix using this methods
https://social.technet.microsoft.com/Forums/windowsserver/en-US/61f218a5-5ef8-49da-a035-90cdd64fc9a0/problem-with-remote-desktop-connection-manager-error-3334?forum=winserverTS
http://shawn.meunier.com/?p=1#comment-43

I can't connect with Turkey!

Hi! I have a problem. I'm from Poland and can't connect with my friend from Turkey using Skype. It's strange coz she is the only one from my friends with whom i can't establish connection. And she is from Turkey. I talked to people from US, South Africa and other remote countries but I can't establish connection with Turkey! And i'm from Poland. Does Turkey block connection from Poland? She has the same problem. She can't connect only with me - she talks to people from all over the world expect me. Can you help me?
Solved!
Go to Solution.

muskagap wrote:
Oh, sorry, it's Marocco not Turkey
tell your friend to connect Skype through a proxy server:
http://community.skype.com/t5/Windows/Unblock-Skype-in-Oman/m-p/905294
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Is it possible to use a custom ringtone in the windows Jabber client 10.5.1? If so how do I point Jabber to the ringtone?

Is it possible to use a custom ringtone in the windows Jabber client 10.5.1? If so how do I point Jabber to the ringtone?

In Jabber for Windows 10.6, you can change the ring tones.

TNSping ok..can't connect with sqlPlus ...just stopped working

Hey Guys,
I have an Oracle Server running for the last year with little issues.
The lister just stopped working...
I can TNSPing ok...I just can't connect with toad or sqlplus anymore from another computer..
I can connect with sqlplus on the same computer...just not from any other computers.
=================================================================
C:\Documents and Settings\Phil>tnsping elvis 5
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 17-JUL-2008 11:10:28
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=7.7.1.1)(PORT=1521))(CONNECT_DATA=(SID=orcl)))
OK (70 msec)
OK (40 msec)
OK (50 msec)
OK (50 msec)
OK (40 msec)
C:\Documents and Settings\Phil>
==================================================
Listener status info
================================================
LSNRCTL>
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.1.0.4.0 - Production
Start Date 17-JUL-2008 10:45:26
Uptime 0 days 0 hr. 29 min. 2 sec
Trace Level off
Security ON: Password or Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
Listener Log File D:\oracle\product\10.1.0\Db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
LSNRCTL>
LSNRCTL>
LSNRCTL>
==================================================
Listener.ora
# listener.ora Network Configuration File: D:\oracle\product\10.1.0\Db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
====================================================================
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
====================================================================
tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
=============================================================================
I am getting this error from sqlnet.log
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.4.0 - Production
Time: 17-JUL-2008 10:23:14
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0

LSNRCTL>
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=elvis)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:18 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: ELVIS, pid: 2284>
(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1027))
The command completed successfully
LSNRCTL>

Can't connect with Windows Jabber client

Similar Messages

Maybe you are looking for