Can't Connecting S7-1200 to LabVIEW‎

Can't Connecting S7-1200 to LabVIEW‎
Video connection error. http://www.mediafire.com/?09qzrxjw8c1w77m
Solved!
Go to Solution.

NI OPC Servers Configuration Can be connected. (Picture 1.)
Lavview 2011 Can't be connected. (Picture 2 and 3.)
Attachments:
1.jpg ‏88 KB
2.jpg ‏99 KB
3.jpg ‏79 KB

Similar Messages

Hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

Marco,
Here are some suggestions:
1) Check the manual the Keithley manual to see how to configure the RS-232.
    On some models you need set Factory defaults to USER and turn on the RS-232.
    Also there may be a setting for SCPI which you want on (probably on by default).
2) On your PC - open Device Manager. See if a COM port exists and is functional.
     You must get this working before continuing.
      You can set the COM port parameters by right clicking and selecting Properties.
     (On some PCs the onboard ports can be disabled in the BIOS)
3) If step two was OK, open MAX (Measurement and Automation eXplorer).
    On the left side, click on Devices and Hardware.
    Click on Serial and Parallel.
    Go to the COM port you found in Device Manager.
    Open a VISA Test Panel.
    Now I don't have one I can look at right now, so this is general idea:
   Configure the COM port to match the Keithley settings (should be OK if step 2 worked)
   Go to the (I think) Input Output tab (you want to send a command)
   The command string input should already have a *IDN? entered, if not, type it in.
   Click on the Query button to send the command and check the response.
   If you get an ID string back (Company name, Model, FW Version ...) then it works.
   (Disregard an error saying it did not get enough charcters back.)
I hope this helps,
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.

Can we connect Multisim and LabVIEW?

Hi frndz
I want some info. please tell me is there any such facility in LabVIEW2011 that i can use circuit from Multisim as a simple camponant in LabVIEW???
take 1 example :
suppose i m doing HOME AUTOMATION project. in that i have my own temp. sensor circuit , light detector circuit. i made these circuits in Multisim.
now i want to use that circuit as a single block in LabVIEW???
can we connect Multisim and LabVIEW?

Hi,
I believe what you are looking for is Multisim connectivity toolkit.
This should help : http://zone.ni.com/devzone/cda/tut/p/id/7785
Sahil

Hardware devices which can be connected to Labview

Hi,
Which hardware devices can be connected to Labview?
I need to establish a testing lab and I want all the hardware devices could be connected to Labview,
so I need the names of the manufactors and specific models or a link to list of models.
thanks.

The quick answer, is that any device designed to accept commands over RS232 or GPIB can be quite easily integrated in to a Labview program.
Devices that communicate with the aid of a DLL file will require a bit more work (instrument drivers from the supplier for instance).
In response to your list, I use Keithley source-meters for a wide variety of my systems. They're very well documented. I haven't personally integrated a power supply or scope so I can't offer any supplier recommendations there.
Scopes usually are able to communicate with the aid of drivers (if drivers aren't provided and you need to access a DLL, this can get tricky for a beginner). As far as power supply, this greatly depends on your power needs.

SOAP / WSDL LabView 2010 can't connect to local webservice of network printer

Hi,
we are using a Labelprinter from cab (www.cab.de) that supports a webservice.
IP: http://192.168.1.66/services.wsdl
When i use this link in FireFox i will get a XML file (see attachment). The company "cab"
has an example using NetBeans to write a deskop application using Java. I tried that and
i was able to connect to the webservice.
When i do that with LabView 2009 or 2010 i get an error message:
1. URL doesn't exist or WSDL is wrong
2. authentification failed
3. proxy settings wrong
to 1)
i'm shure the link is ok, i can't connect to it with Netbeans (i used copy & paste to be sure)
to 2)
In Netbeans it is not possible to enter a user and PW. But anyway i have use the standard
soap user the was given by the company.
to 3)
don't use it
The last point is, that there is an error in LabView 2009 and 2010, e.g. error parsing the XML file?
Can someone help me?
Attachments:
services.zip ‏2 KB

HI I have the same problem with my CAB printer...
I try the Solution from the link
https://decibel.ni.com/content/docs/DOC-22722
With the soapUI it works well, I can make requests to the printer an become an answer...
But in Labview it doesn't work. The TCP read vi brings the error 66 an I have no idea! Have someone a solution or an idea?
Best Regards samsi
Attachments:
SOAP_CAB_Drucker.zip ‏32 KB

How can i connect simple dc motor to labview

any one who help me how can i connect simple dc motor to labview and speed control of that

Hi,
There is a selection guide for motors on our website which can be found here: http://zone.ni.com/devzone/cda/tut/p/id/12594
There is also software specifically for LabVIEW to control motors. You can find it here: http://sine.ni.com/nips/cds/view/p/lang/en/nid/13851
Regards,
Greg H.
Applications Engineer
National Instruments

How can i connect labview with ge fanuc versamax plc via VISA

I, ve a ge fanuc versamax plc. I am building a data logger in labview. There are two current trasmitters. I dont have any other data acquisition devices other than PLC. How can i access data acquired by PLC and how can i connect it with labview using VISA?

KPAC wrote:
I've a ge fanuc versamax plc. I am building a data logger in labview. There are two current trasmitters. I dont have any other data acquisition devices other than PLC. How can i access data acquired by PLC and how can i connect it with labview using VISA?
There may be variations between models, but I believe all VersaMax support Modbus and GE's own SNP/SNPX serial communication protocols.
For Modbus communication protocol:
The link here is a good outline of the different options available. If you really want to limit yourself to the option of using VISA, then it's Items 1. and 2. in Khalid's list that are applicable. You might have to modify some of the free LabVIEW Modbus VIs to suit you needs, but they are useful as examples if you have little experience programming a serial driver.
For SNP/SNPX:
Your options are similar to those for Modbus, except that I'm not aware of any existing free set of LabVIEW VI's for it. With a web search you might find something (I almost programmed one 10 years ago). The SNP/SNPX protocol is/was well documented in a GE FANUC manual which you could get from them (in 1993 it was GFK-052B "Series 90 PLC Serial Communications User's Manual") so you still can write your own set of VIs.
If you don't really need to limit yourself to using VISA, there are ActiveX and OPC drivers available which use SNP/SNPX that you can find with a web search. And you can see here that NI's Industrial Automation OPC Server's do include an object for GE Fanuc Versamax via Ethernet. This would not be the cheapest in terms of capital cost though.
Good luck.
=====================================================
Fading out. " ... J. Arthur Rank on gong."

Can't connect my Dell Inspiron 1200 to my Mac airport

I just spent X amount of dollars to try to connect my Dell to my Mac airport for nothing. I keep trying to connect to my wireless network, putting my password and it keeps telling me that it can't connect to my preferred network. The person who fixed my computer told me that my Dell worked fine at his place which means that it's a question of compatibility between my airport and my Dell. What do you suggest I do to fix the problem. Thanks in advance.

Yes, that is fine.. but it should be in WAP mode.. depending on the brand.. this is called bridge by airport.. but that name is seldom used of router bridge.. since with wireless routers it is so easily confused with wireless bridge.
But any wireless router is in effect a router plus a WAP. You can buy a plain WAP for twice the price of the cheap router which is more useful. This is just product marketing.. and is there to trick people into paying more for less.
A cheap wireless.. eg any of the bottom series of TP-Link will cost you less than $50 in whatever currency you use.
Set the router in WAN bypass mode. This means set a fixed IP address of the same range as the airport uses.. eg if at default your AE is 10.0.1.1 and has dhcp set to 2-200. So make the new router 10.0.1.250 and turn off the dhcp server in the router.
Plug ethernet from LAN on the router to LAN on the airport.
Voila.. you have a WAP that will work fine next to the Airport.
Set the wireless channels if you need to but auto should be fine.. spacing the two routers a couple of meters is also good.
Any issues ask as specific as possible.

Windows 10 Build 9926 - Can't connect to this network in certain networks

I have been asked to ask this question here. The original thread can be found at:
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_web/windows-10-build-9926-cant-connect-to-this-network/e9196f95-5570-4a92-8fae-d29d7d1416b2?msgId=b2246cb5-1038-40dc-98b6-249e8734eb7f
Hello
I have a Samsung 700T tablet.
Since I got the latest update 9926 I am having issues with my corporate network access. I have to type in my user name and password on the wireless connection. When I do I get "Can't connect to this network" message.
I have tried multiple drivers for the network card a "Intel(R) Centrino(R) Advanced-N 6235". I am currently using latest.
I am able to connect fine with my home Wifi.
On the "System" event log I get the following error message when I attempt to login no the WiFi.
"A fatal alert was received from the remote endpoint. The TLS protocol defined fatal alert code is 42"
Any ideas?
I have checked and my card is set to use DHCP.
God bless,
Bruno
--- got this answer ----
Have you tried talking to your system administrator? We had a fun bug in our Cisco wireless access points and wireless controller that would
kick Win 8+ machines from even trying to connect. A very long firmware and software update process fixed it.
--- answered back ----
Hello DatAsian,
Thank you for your response.
This is a very large wireless network, and as far that I know I am the only one having this issue. My other devices on the same cube work fine. The only difference is of course Windows 10. The other machines are Windows 8.1 and Windows 7.
In the past this was caused by a driver, but I have gotten about 6 different version of my wireless driver and they all have this issue.
I read on the troubleshoot about entering the wireless configuration manually by using the "Hidden network" screen. The instructions go:
2. Tax or click to connect to a network
3. Tap or click Hidden network tap or click Connect and then enter the network info.
I cannot find this "Hidden network" text on the "Connect to a network" screen. Am I missing something? Do I need to check something that allows me to connect to Hidden network?
One thing that I forgot to mention. I need to enter my user name and password when I enter this wireless network, since this is Employee Own device network.
Any other ideas?
God bless,
Bruno
When I use an android device I had to do the following changes to the way the device connected to wireless:
EAP Method: TTLS
Phase 2 Authentication: PAP
Then I have to use my user name and password.
Is there a way to set windows to the same type of authentication?
Please let me know.
God bless,
Bruno

Hi Alex,
I have the similar problem with Bruno, using the
certificate network.
The Event View show message of the Wired-AutoConfig as below:
Information 1:
Network authentication attempts have been resumed on this network adapter.
Network Adapter: Intel(R) 82579LM Gigabit Network Connection
Interface GUID: {************************}
Information 2:
Wired 802.1X Authentication was started.
Network Adapter: Intel(R) 82579LM Gigabit Network Connection
Interface GUID: {********************}
Connection ID: 0x2
Error:
Wired 802.1X Authentication failed.
Network Adapter: Intel(R) 82579LM Gigabit Network Connection
Interface GUID: {******************************}
Peer Address: ************
Local Address: ************
Connection ID: 0x2
Identity: -
User: -
Domain: -
Reason: 0x70006
Reason Text: The network does not support authentication and 802.1X is enforced in the profile
Error Code: 0x0
Information 3:
Network authentication attempts have been temporarily suspended on this network adapter.
Network Adapter: Intel(R) 82579LM Gigabit Network Connection
Interface GUID: {*************************}
Reason Code: The network does not support authentication and 802.1X is enforced in the profile
Length of block timer (seconds): 1200
everything find with Windows 7 and 8.1
days searching the internet but nothing makes sense.
looking forward to your help
Thanks!

How to connect external sensors to labview?

i want to ask How can i connect external sensors to NI labview for my final year project.? here are my lists of sensors:
a. Temperature sensor (LM35)
b. Humidity sensor (HH10D)
c. Light sensor (LDR)
d. Moisture sensor

simply_me wrote:
I've used the NI's bread board (with DAQ assistant initially) when I was in school. We used it for temp, light, and etc... measurements, the whole system is very straight forward. I would say having the option to simulate signals is a big plus in that. From what you described, I don't think the "slower" rate of data acquisition will disturb you at all. But more information is needed on your sensors and general functional spec.
@ NIquist & RTSLVU, please correct me if I'm misleading/wrong :-)
Is that the ELVIS stuff? Very neat but kind of pricey (unless the school is paying! )
Again, the low-cost USB DAQs from NI or MC are the way to go for the OPs project. I am assuming that he has enough electronics background to make simple signal conditioning circuits for his sensor chips.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

How can I record a video with LAbview?

Hi,
I have a question: How can I record a video with labview?
I have a camera (AXIS 221) connected via rj45 on PC. I see the video of the camera in a browser.
And I would to acquire the video in labview.
Could someone help me?
Thanks
Raf

Unfortunately I haven't any experience with this camera. Iguess, you should install API, then crete new VI, place ActiveX container (palette Container->ActiveX) on the Front Panel, then right mouse click, then choose Insert ActiveX object..., then found you camera object and select it and press OK. Then you probably can see image from the on the front panel. Also probably you will be able to get image data in array (how easy is it - depends from the camera API).
If you able to see image from camera in the Internet Explorer, then another method - you can put Microsoft Web Browser as ActiveX object, then you should also see the image. Disadvantage of this method - you will be not able to get image data.
Andrey.

How to connect mysql database to labview and plot the graph

Hi all,
I am doing my final year project about labview. I need to connect my mysql workbench database to labview and plotting two sinwave in same graph. I can already connected my labview to mysql and showing the data in labview table.But I need to plot the two sinwave in on graph according to table data. Eg: table data&colon;      timestamp   wind speed wind direction
                                                                                                                                                                                                 2004-01-01        0.5                 56
                                                                                                                                                                                                  2004-01-01         0.6                 60
The attachemtn vi is about inserting file and plot the graph. And now I want plotting the sinwave using table data and the wind speed Y-axis,wind direction Y-axis in both side of my graph and the X-axis is showing the whole day timing like 00:00:00-24:00:00.  Can anybody combine these 2 vi to polting the graph according table data not according to file data.Thanks
Attachments:
Mysql.vi ‏11 KB
Insert File.vi ‏25 KB
Wind Project.vi ‏24 KB

Please don't start a new thread. Stick to the original.
http://forums.ni.com/t5/LabVIEW/How-to-plot-waveform-or-graph-using-table-database-which/td-p/294036...

My X61 can't connect wireless when i use battery!!!

TYPE NO.: 7673-AN6
i confused why it can not connect wireless when i use battery?!
the problem drive me crazy nearly, it means i must take adapter every time
i help every one can help me!
cheers,

Most of the functionality and problems are in the drivers. The hardware tends to be discrete testable functions though these days there is a fair bit of functionality in the hardware. The hardware tends to be implementing better defined protocols where as the to and fro of the higher level protocols tend to be what varies from Access Point to Access Point. The 4965AGN is a fairly recent chip set and the drivers are far from smoothly running.
The problems can vary from AP to AP so may work at home but not at work etc. Some have reported here that the 4965AGN setup doesn't work with the Cisco 1200 Access Point and I have yet to be able to get it to work under Vista with the equipment at any New York Starbucks. T-mobile do use Cisco equipment but I don't know which models.
Anything you can do to simplify the situation helps. Maximum power. No security. Disable IPv6 on the connection etc. Just to give a rough idea of the kind of thing that might be wrong here are some of the things listed as known issues or fixed according to the readme of the driver (Originating from Intel) that was released for the 4965AGN on 4/11/08.
There are several authentication issues with EAP, PEAP and LEAP which will cause it not to authenticate. There are also Vista EAP issues and some things which may resolve with SP1 which was pushed out on update last week. So there are many comnbinations of situations which may not work and it is important to test with different access points. Authentication and security has more issues. Also at the higher speeds such as 54Mb some of the security mechanisms will not be able to keep up. AES is the only mechanism which Intel expects to work at 54Mb.
http://downloadmirror.intel.com/15806/ENG/relnotes.htm
There have also been past issues where the cards are silenced for twenty minutes after a failure to authenticate and in many cases the card will not be in a valid state after hibernation. It is noticable that when you phone T-mobile the first thing the tech has you do is completely shut the machine down - not hibernate - and begin afresh.
Once you have uninstalled and re-installed the drivers and connection manager a few times it is also possible to be having problems with junk left in the registry.
I don't recommend adding the 4965 drivers directly from the Intel site. I would wait for the one that has come through the Lenovo testing cycle.
In reality for those who don't want to make maintaining their laptop a serious hobby (Hopefully all of us - Far too much time is wasted on wireless) it is really a matter of rebooting your machine at a given access point. Trying your luck and then shutting it down and going somewhere else if it doesn't work. Use wires when you can. At home if your access point doesn't work check your configuratiions, temporarily remove all security, restore factory settings on the AP, reinstall from scratch and if it still doesn't work replace it with a different brand of Access Point.
Of course it is intended to just work and for 95+% of situations Wi-Fi does. The 4965AGN is newer so it has its fair share of early life issues to get resolved. Vista also still has issues. If the problem you are seeing is only when you are on batteries you are lucky and LANOgre's instructions may well solve it.
Message Edited by hiker on 05-19-2008 09:23 PM

Can't connect to .Mac, lost all Contacts, Calendar info

Hi all.
I have a recent iPod touch. It's set up to synchronize (Mail, Contacts, iCal, Applications) wirelessly with MobileMe, NOT via iTunes.
Everything was working fine.
This afternoon, I loaded 5 pictures and also used the Maps application.
Now, back home, the iPod can't connect to MobileMe: if I try to use the Mail application, it displays the msg "Checking for Mail..." forever and nothing happens. Eventually, I get a msg stating "Cannot Get Mail The user name or password for [email protected] is incorrect". (That is ********.), I click OK and then it states "Cannot Get Mail. The connection to the server failed".
I also appear to have lost all my contacts (only about 1200) and all the calendar info.
Any suggestions?
Thanks!

Hi, everybody.
Following an Apple troubleshooting procedure, I ended up deleting my account and re-creating one and was then able to recover my contacts, mail and calendar info from MobileMe.

How can i connect FP-PWM-520 8-Channel, 5 or 24 V PWM to computer

Hi
How can i connect FP-PWM-520 8-Channel, 5 or 24 V PWM to computer.
Is it supports for Programmble interface(specially using LABVIEW).
Give me the details to interface connector hardware and software description.
Thankq all
Mahesh.

Hi Mahesh,
It sounds like you are just getting started with using the FP-PWM-520.
Since you are looking for rather general information I would recommend that you search ni.com for 'FP-PWM-520' and you should find plenty of relevant links.
Connection info can be found in the Operating Instructions Manual which is linked off of the Product Page. More general information can be found on the DataSheet.
As with all other National Instruments products you can easily program
and control FieldPoint from LabVIEW. Don't forget to download the
latest version of FieldPoint (currently NI-FieldPoint Version 4.1 for Windows 2000/XP).
These links and any other searches should help you find what you are looking for.
Regards,
Otis
Training and Certification
Product Support Engineer
National Instruments

Can't Connecting S7-1200 to LabVIEW‎

Similar Messages

Maybe you are looking for