Can't Connection With Airport (card)

My G5 can see my network, which uses WPA2 Personal.
I can connect with my laptop (a MacBook), but with my tower does not.
It can see the network, but I get "Connection timeout" as part of the message. Password is correct, which I know because of the checkbox, "Show password".
I'm using a D-Link Router (DIR-655), and can mess with all kinds of settings if need be. But I suspect it's my Airport card, which needs help.
Any clues would be much appreciated.

The router does use 802.11g, along with 802.11n; it can send a mixture. I was shocked at how slow the G5 does wireless web stuff.
FWIW, the way around the timeout problem seemed to be to reboot the router through a browser-based control panel I was able to pull up on my MacBook.
Thanks for responding.

Similar Messages

  • IMac G4 suddenly can't connect with Airport -- password not recognized

    I have an iMac G4 running OS X 10.4.11 with an airport card installed that until recently connected with an Airport Extreme base station in the next room. Recently, the connection fell out, and when I try to reconnect with the network, it says it won't recognize my password. (We use WPA2 personal security.) This failure occurs even though my iPad can hook up, as can my wife's G5 and her iPad. There was a problem with an Extreme router, but my wife reset that, and when she did she used the same password that we've always used. So, in essence, my G4 is the only piece of equipment that can't talk on the network.
    An Apple helpline person said he suspects my computer is just getting old; it's around 7 years old now. I'd hate to think that's the case. Could this be a hardware and not a software problem? Any suggestions of what to do?

    I suspect that that "Apple helpline person" is just getting lazy...
    It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense.  They're also tailored to OS X 10.5 and 10.6, but they should work with OS X 10.4.
    1) Use the AirPort menu bar item to turn AirPort off, then on again.
    2) Try to select your Wi-Fi network from the AirPort menu.
    3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
    4) In the same panel as (3), define a new location and see if you can make that work.
    5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
    6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
    These steps may not help, but they'll only take a couple of minutes to try.  Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them.  If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

  • VPN--Can't connect with airport extreme (can with lynksys)

    I have an airport WDS at home. My employer has set me up with a VPN. I can't connect via my airport but if I walk over to my neighbor's house, I can (he has a lynksys router). I've been working with my IT rep, looking at ports, firewalls, etc. We've added 4 different port addresses to the port mapping tab on my airport base station, still nothing. Does anyone have thoughts or answers?
    Powerbook G4   Mac OS X (10.4.4)  

    never did find an answer. ended up purchasing a lynksys router and had no problems.

  • CAN NOT connect with airport ??

    I cant connect with my Airport, to my 2wire Home Portal 1000HG for some reason it always says There Was as Error joining Airport Networke "2WIRE538" it works fine with the LAN cable, but I would like to use it with wireless sometimes to, if anyone could help that would be awsome, I just dont want to sit on the phone with SBC yahoo or 2Wire for 5 hours

    I suspect the version of the 2 wire you are using has one of 2 things either it is the wrong model for wireless connection, there are several, as shown.
    http://computers.search.ebay.com/2wireDSL-ModemsW0QQfsooZ2QQfsopZ2QQsacatZ62023
    If you have the correct 2 wire for wireless you may not haave the correct firmware, as shown below.
    http://www.broadbandreports.com/faq/12110
    Cheers Don

  • Sharing ethernet connection with airport card from ( iMac 17" intel)

    I have recently upgraded from a 800 15" iMac to a new 17" intel iMac - before the upgrade it would share the ethernet connection to the internet with sharing and broadcast the signal to my FW800 powerbook ( or any other mac in the house ( no problems)
    Now with the new Imac set up I enable sharing ethernet connection to computers using airport ( same as before) I can see the computer ( sharing the connection) in the airport menu of my FW 800 PB - when I try and connect I get an error message ?
    Looking for any tips or direction? I searched this forum ans apple support pages and did not find an answer... PB = OS 10.3.9 - Imac = OS 10.4.5

    Hey thanks for the welcome!
    The error message said " there is an error in connecting to ..."
    OK ( after just checking it again) go figure - I turned off sharing ethernet connection to computers using airport on the iMac - and turned it back on and voila! I am now connected using the PB - ??? Must have been a reset issue?
    lets see if this is a solid connection...
    Thanks for the fast reply!
    Pasquale

  • WRT54G freezes when mac connects with airport card

    I'm using WRT54G, i have plugged to it 3 things; cable modem, a PC desktop and a mac desktop. that all works great. When I connect via my mac laptop the router freezes, sometimes. i've been tracking it and there is no consistency of how long until it freezes or what seems to make it freeze. but it always freezes at some point. and when it does all the computers internet goes down until I restart the router. Any ideas what is happening? I appreciate your help!

    Hi-
    Did you install it correctly?
    http://www.info.apple.com/usen/cip/pdf/g4fw800/g4fw800-airport-extreme.pdf

  • Windows XP client can't connect to AirPort Extreme AP with WEP enabled.

    Hello,
    I have big problem with Mac Mini AirPort Extreme working in AP mode with Windows XP client.
    Some time ago, AP refuse to connect Windows XP clients (notebook) when WEP is enabled (40/128 bit, same problem), while before that, everything work perfect.
    On other hand, iPhone can connect using WEP without an problem.
    When WEP is turned off, XP client can connect but this is not acceptable for me.
    I must notice that friend of mine have absolute SAME PROBLEM which rise almost at same time few months ago. They have Mac Mini and XP notebook (different then mine) which can not connect with WEP turned on, while his iPod touch work!
    I guess that this happened due AirPort Firmware upgrade included in some of Apple software update.
    Does anybody have similar problem or know the solution?
    My AirPort Card Information:
    Wireless Card Type: AirPort Extreme (0x168C, 0x86)
    Wireless Card Locale: Worldwide
    Wireless Card Firmware Version: 1.4.16.2
    Current Wireless Network: Mac mini
    Wireless Channel: 11
    Tnx in advance.

    mikikg, Welcome to the discussion area!
    Sorry but this is a known issue.
    The only solution is to get a real wireless router instead of using your Mac mini as a base station.

  • Can I create a home network withous dsl connection with airport express

    can I create a home network without dsl connection with airport express?
    So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?

    You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network. 

  • IMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. What is wrong?

    iMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. when i open airportconfiguration on the iphone is see that the imac isn't connected anymore. Normaly the airport express wake up the iMac but it doens't. What is wrong?

    anyone knows a reason for the item above?

  • Can't connect to Airport over ethernet with XP Home SP3

    I can't connect to Airport Base station dual ethernet over ethernet with XP Home SP3. The XP lan connection said Windows could not complete : Renewing your IP address, when i try to repair the connection. the apple Extreme Admin utility shows Base Station Information but can't configure it and said:
    The Base station has been reset and is not configured, make sure your computer is configured for a 192.42.249.X-compatible IP address so the base station can be reset to its default configuration. Can any one help with this? I want to set up the airport so I can provide wifi to an IPod but i cant get XP to connect properly it said i have limited or no connectivity.

    Its working now but the windows computer still cant get the aiprort base station to start a dialup connection. I dont wnat to usr the ipod for this all the time. Any ideas how to get XP to force the Airport Base Station to open a dial up connection.

  • It is just searching on my iPhone 4s with or without a sim card. can not connect to sim card

    it is just searching on my iPhone 4s with or without a sim card. can not connect to sim card

    I can't pair my iphone 4s with my imac.  It is very frustrating.  I can walk by anything resembling a  bluetooth and my iphone with pair...but not with my mac.  Any assistance would be appreciated.

  • HT4623 Please help. My iphone can not connect to SIM card , I tried many times there is no hope.

    Today I updated my iphone , but when it finished , it can not connect with my SIM card I do not know why?

    What is the exact error message? Does it say that there is no SIM, or does it say that the SIM is unsupported or invalid?

  • Looking to get a Mac Pro Refurb, How can I get the Airport card too?

    I can't find an airport card available anywhere for the Mac Pro. The refurbs do not look like they come with one. I can't find it from apple or anyone else.
    What's the deal, and what can be done?
    Thanks a lot,
    Mark

    You can take it into an Apple Authorized Service Provider (AASP) or search on-line for places which offer the card.
    One site is Fastmac.com.
    You may also want to take a look at the Mac|Life article "Getting a Mac Pro Wireless".

  • Can't connect to airport extreme after installing 10.10

    After installing OS X 10.10 WiFi connection with Airport Extreme drops out a couple of different ways.  Log in fails, Says Airport extreme is not there (2ft away), drops data connection with all WiFi bars showing.
    Drops data connection mid data transfer.  Then after sever power recycles of the MacBook Pro connection comes back.
    Light on Airport Extreme is blinking.  This iMac is also connected passing data via the same Airport extreme while the MacBook Pro is having the above experiences.
    Anyone experiencing WiFi issues since 10.10?

    You can download the Apple Airport Utility directly from Apple:
    http://support.apple.com/kb/DL1547?viewlocale=en_US&locale=en_US
    Regards,
    Shawn

  • HT1126 Can I connect the Airport Express directly to my wireless router?

    The old owner of my house set the Air port for my use, gave me a password ... when I tried it, the password never worked.
    DO not want to lose my old wireless system as it allows me to do more than just the Air Port.
    should I reset the system?

    can i connect the airport express into an ethernet port in the wall
    I assume you are asking about obtaining an Internet connection here.
    First, temporarily turn off the wireless on a laptop and connect the laptop to the Ethernet wall jack with an Ethernet cable. Can you log on to the Internet this way?
    If yes, then you can connect an AirPort Express to this Ethernet port and configure it to provide a wireless signal for multiple devices.
    If no, then you can connect the Express, but you will not have an Internet connection.

Maybe you are looking for

  • Count No of records in an internal table using 4 fields

    Hi All, I have an internal table with about 50,000 records. I need to group these (sort) based on 4 fields and then provide the count for each combination of the 4 fields. For eg, if I have 3 records in the table which have the same values for all th

  • Error while using utl_http package

    Hi Guys, I need some help with the utl_http package The problem that Iam facing is as follows : Iam trying to use the Oracle provided package utl_http package to send an http request to a particular website.However Iam getting the request_failed exce

  • Where is a comprehensive list of error codes?

    I keep looking for a comprehensive list of all error codes sorted by number.  If, for example, something reports an error like "An error of type -1409 has occurred.", it seems there must be a list somewhere of descriptions of errors of type -1409.  I

  • Same Template in Multiple Smartforms

    Hi Experts, We have a same template to be used in different Smartforms, Is it viable for us to create standard text in SO10 transaction & use in smart forms. Our template will have rows & columns with hard coded text. How is the procure to attach sta

  • Factors in Item Master Data

    Hi all, Can any one Please let me know,what is the Usage of Factor-1,2,3,4 Fields in Item Master Data   (Purchasing  and Sales Tabs). I just want to know in which scenarios we can use them? If anyone could explain the same with practical example,it w