Can't control fans speed after upgrading to kernel26 2.6.31 [solved]

Mother board is ASUS P5Q-SE. After upgrading pwm sensors disappeared. I can get temp and fans speed but not set. Any ideas? :-\
Last edited by urandom (2009-10-12 15:52:51)

"This works for me" is a little vague. What worked for me specifically was to start with your link and drill down two levels of links to this webpage, http://hansdegoede.livejournal.com/7932.html, which explained what the problem is and that the workaround is to add acpi_enforce_resources=lax to the kernel command line in /boot/grub/menu.lst.
Someone who understands this issue better than I do should probably amend the appropriate sections of the wiki (lm_sensors, fancontrol, et al).
Jay

Similar Messages

How can I control fan speeds in Win7 on a MBP-R for gaming?

I have a MacBook Pro with Retina Display. It has had Windows 7 installed and I want to play some 3D action games. How do I stop internal parts from overheating? I intend to use a USB cooling pad but that'll do nothing if the internal fans remain at idle speed.
The only Windows fan speed control utility I could find was the 4-year old SpeedFan which fails to detect the presence of any internal fans. I'm not impressed with the Windows community's failure to offer more and better than this tired old relic.
So the questions remain:
(1) Is the hardware still capable of automatically accelerating the fans as temperatures rise while gaming in Windows?
(2) What In Windows forces the MBP-R to lock the nVidia GPU into continuous duty and ignores Intel GPU?
(3) What control does the user have for (2)?
(4) How can I protect my MacBook Pro/Retina from overheating while playing PC games, apart from not playing games?

Moved from the Creative Cloud to the Lightroom forum. They will be able to help you here.

MSI Z87-G43 can't control fan speed

Hi, i just bought an MSI Z87-G43 and i'm using a i5-4670 on it (yeah, 4670 without the K).
I wanted the minimum noise as possible so i bought a Noctua NH-U12P SE2
Like the pictures shows it has 2 fans.
I connected the 2 fans on cpu1 and cpu2 fan and both BIOS and Commander Center can see them correctly, but both of them can't change the rotation speed.
Those fans have a 3 pins connector.
How can i do it? Now my CPU is cool and i like it, but a little more hot for a little less noise is a good deal (and my goal!)
thank you

As alternative you can get a fan controller like Sunbeamtech Rheosmart PCI Fan Controller, it should allow to use 4pin PWM singnal and convert it into voltage control,
Quote
Product Details:
Smart Way Controlling all Fans & Airflow. The Rheosmart PCI Fan Controller is designed to make any existing 3-pin fan automatically regularized by the PWM signal from the Motherboard! With its ability to connect two fans to a single PWM connector at a maximum of 20W/channel, a wide selection of fans can be supported. When a normal fan is connected to the Rheosmart PCI Fan Controller, they become auto adjusting through the PWM signal.
The Rheosmart PCI Fan Controller operates in two different modes; when connected to a PWM-enabled motherboard you can allow the system to auto-adjust fan speed through he motherboard's temperature sensor. When switched onto manual mode by the pushing of the lever-switch to the right, you turn the connected fan onto manual control mode.

Headphones controls wont work after upgrading to ios5?

Headphones controls wont work after upgrading to ios5, has anyone solved this problem?

ajkula66 wrote:
Secondly, what is the 7-character model number of your T40 so we can point you to correct wireless drivers..237?-???
Goo00oogle, you forgot the other 3 digits
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Has anyone seen a DRASTIC change in speed after upgrading to 5.7?

Has anyone seen a DRASTIC change in speed after upgrading to 5.7? Just the simple task of copying photos now takes FOREVER. Importing iphoto for just two years of photos (my smallest iphoto library by far) took A WEEK. I did not have access to Lightroom for a week. I thought it was just going to be the iphoto import, but now my regular import is taking almost 1/2 an hour and only 22 photos into the import.

Oh no! I think I might be experiencing the same problem, oddly with almost exactly the same time to import from iPhoto, just shy of 7 days...
I also posted this problem to the form and am actually on the phone with Adobe support right now. I have an iPhoto library of ~15,000 photos and I didn't expect it to be very fast, but it's taking an average of at least 40 seconds per photo to import, and it has kept complete focus of LR so I can't even confirm that it isn't importing duplicates. By my calculations it should take over 166 hours to complete the import! Something has to be wrong here. I've been going for over 48 hours and am scared to stop the import if this really is normal performance.
Are normal import tasks also slow for you now? Can you share any more details? I can't test myself yet since the iPhoto import is still churning, but it could help troubleshooting with support. I'll let you know if they come back with anything, I'm on hold now.

Is there a way control fan speed in ubuntu linux to replace hp coolsense?

My computer is prone to over-heating when I'm using Ubuntu and so I'm trying to control the fan speeds. I've researched a little and I'm blocked on how to control fan speed and then installed `lm-sensors`and `fan control`.
I'm now trying to configure lm-sensors to no avail. In terminal I typed `sudo sensors-detect` and answer YES to all YES/no questions. Installed modules with` sudo /etc/init.d/kmod start`.
Now when I typed `sudo pwmconfig`
I get this output
/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
The way I tried to fixed this is to edit /etc/default/grub to add `acpi_enforce_resources=lax` to the `GRUB_CMDLINE_LINUX_DEFAULT` and then perform a grub update. I'm still having the same issue.
Could it be that my fans are PWM 3-pin where fan speed is controlled by voltage?
This is the output of the `sensors` command.
acpitz-virtual-0
Adapter: Virtual device
temp1: +79.0°C
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +79.0°C (high = +84.0°C, crit = +100.0°C)
Core 0: +78.0°C (high = +84.0°C, crit = +100.0°C)
Core 1: +75.0°C (high = +84.0°C, crit = +100.0°C)
Core 2: +76.0°C (high = +84.0°C, crit = +100.0°C)
Core 3: +74.0°C (high = +84.0°C, crit = +100.0°C)
Can anyone help me? Thanks.

BUMP

How to control fan speed on Satellite A660-11M?

please any body know how to control fan speed its always 69% and make bad noise and the cpu usage is 3% no at high processing i try advanced power settings but still runing at high speed

> I hope u didnt expect that they were gonna stay at 0% like forever
Of course I dont expect this. When you switch on the notebook CPU reach high temperature in few seconds only and you must not wonder if pretty high CPU temperature and fan activity will be shown very soon.
I dont know what do you expect but it is logic that cooling fan will run. Maybe all time maybe will be cut off for short period of time but it will run permanently. I dont see any problem there. With cooling method option it can be reduced a little bit.
And what is your question? I didnt understand what you want to know exactly.

Can't print in PSE11 after upgrading to windows 8.1

I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
Tracy Ferreira 2607 Woodruff Rd.
Suite E-126
Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com
From: hatstead <[email protected]>
To: Tracy Ferreira <[email protected]>
Sent: Tuesday, March 10, 2015 1:58 PM
Subject: can't print in PSE11 after upgrading to windows 8.1
can't print in PSE11 after upgrading to windows 8.1
created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I can't update my apps after upgrade to iOS 6...?

I can't update my apps after upgrade to iOS 6

Are you sure you have a proper Internet connection? Make sure your iPod is connected to your computer, and you have an Internet connection.
Don't even get me started on the iPod Touch 5G, I actually own an iPod Touch 4G, and I've considered a lot about if I should get the new one. At first look, you might be sold by the features Apple has on their iPod Touch page. It has a taller screen that's a 4-inch Retina Display, has a much better camera with a flash, and comes with iOS 6 preinstalled with Siri. But the real breakthrough comes with the new connector. It's called Lighting, and it's much smaller. But if you have a dock connector that comes with some cars, and maybe a set of speakers or docking stations as alarm clocks, I encourage you not to get the new one. The usage of your old connectors requires a $30 adapter, which is a ridiculous price. And who knows how secure the adapters will be with your docking stations? I personally think Apple has crossed the line. If they are to put a new connector with their new products, they should ship with an adapter in the box, at least at first. This is why I strongly encourage you NOT to get the new 5th generation iPod Touch.
Sorry if I went a little off-topic there, but I wanted to get my point across. For your updating to iOS 6, I reccommend you check out other discussions in the support comunity, and see what other contributors have to say. Or go on Google and search your error messages, possibly someone might've already went through the same problem as you did. I really hope this helped!

Can't to connect WiFi after upgrade to 10.7.1

My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

What can I do about this: After upgrading to firefox 6, I get this error. TypeError: Components.classes[cid] is undefined???

What can I do about this:
After upgrading to firefox 6, I get this error.
When I click to open Firefox, A box open with the following error:
JAVASCRIPT Application
TypeError: Components.classes[cid] is undefined?
After I click close on the box, then Firefox will start. I really just want to get the error fixed so that when I want firefox open, I don't have to see this box anymore.

You need to figure out which add-on is causing that error and disable it until the developer of that add-on fixes it. There may be an error message about that in the Error Console, accessed through the Web Developer menu item or through {Ctrl + Shft + J}.
Also see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Can't open old mail after upgrade to yosemite

can't open old mail after upgrade to yosemite OS X 10.10. My old mail was version 6.6. The new version is 8.0. What to do??

How are you trying to open it, and what exactly happens?

Contacts. Can't add new contacts after upgrading to Mtn Lion from Snow Leopard.

I can't add new contacts after upgrading from Snow Leopard to Mountain last week. I do not use iCloud. Any suggestions?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

I can't receive phone call after upgraded to 6.1.2

I can't receive phone call after upgraded my iphone 5 to 6.1.2
Sometimes it works, but sometimes it doesn't.....
Please help!!!

go to settngs, general, reset, reset network settings, if that does not work then follow this link and restore the phone.
http://support.apple.com/kb/ht1414

Fans Run Full Speed After Upgrades

I have a late 2007 15" Macbook Pro. I just recently replaced the hard drive (because i needed more space) and the keyboard (because it was defective) and since i've put it back together the fans are always running at full speed. I do have an smc control app but the adjustments i make are not affecting the fan speed at all. Does anyone know what I might have done wrong to cause this? and is it something I can fix?

I've checked all the connections and I don't appear to see anything loose, or any crimped or cut wires. Someone though it might be that the new hard drive I put in runs at a higher rpm (7200) than the original 5400rpm drive, but that was ruled out after placing the original drive back in. At this point it looks like I may be replacing this laptop if I can't get this issue resolved.

Can't control fans speed after upgrading to kernel26 2.6.31 [solved]

Similar Messages

Maybe you are looking for