Can't convert certain IE Web Pages using Acrobat 9 Pro
http://mediasolveconnect.com/demo/?scene=test1#Endcap-Sponsorship
I am able to successfully convert various web pages in IE to pdf however when I try to convert the pages on this site I only get a solid black page.
This page is a Flash site, while Acrobat supports importing Flash content, entire sites built in Flash often have issues displayed as a PDF page.
Similar Messages
-
How does I resize a pdf file page using Acrobat Pro?
In Acrobat Pro, how can one resize a pdf file page (21.38'' x 26.75'') into one measuring 6'' x 9'', to be submitted as the trim size? Is there a feature that allows this to be done? How does one set all print options from the Application print dialog box to enable one to adjust the dimensions of any customized file page?
I want to scale the 21.4'' by 26.8'' content down to one that can be fitted inside a 6'' by 9'' book.
I have this pdf that was created from the InkFlow app, and I'm using Acrobat Pro to merge three files into one (about 300MB), which I needed to submit to Amazon's CreateSpace, but they needed the trim size of 6'' by 9'', while the pdf is 21.4''' by 26.8'', and I can't amend the source file size of the InkFlow files.
I tried fiddling with the Crop and Print options, but I'm unable to resize the pdf to match the trim size. The problem on my side isn't so much on printing but to resize the pdf file page to 6'' by 9'' to satisfy Amazon's requirement for their trim size. Could this be done with Acrobat Pro? The message that appears is: Full print options of Acrobat Pro, set all print options from the Application print dialog box. Thank for the help. -
Can't create a PDF from a Web page using acrobat 8.0
I am using Acrobat 8.0, + Mac 10.5. When, in Acrobat, the dialog box comes up (File>Create PDF from Web) I first enter the URL, then try to click on "Settings" but nothing happens. Then I get an error message. Is this a known problem?
If the url is for a secured web site Acrobat can not always get the data as it is not logged into the web site. Some web features can not be converted to the PDF format. Is the web address correct? I would use cut and paste since some web addresses can be quite hard to type in.
-
Why can't I successfully upload web pages using FTP?
I recently installed Adobe Dreamweaver and successfully connected to a remote server where the files on my existing website are stored. I was then able to call up web pages from my local site, make revisions and successfully upload them (using FTP) to the remote server.
Problem started occurring when I received a Dreamweaver prompt advising me to change the name of my website's root folder from Unnamed Web Folder 1 to the actual location of the files on my i-Mac hard drive. In doing so, I moved the path of the site and changed the name of the root fokder.
Since then, when I make revisions on a locally stored web page and try to upload it to my remote server (by clicking on the "put" upward arrow), the operation seems to be excuted correctly. But when I test the revised page on a separate browser (like Safari or MI Explorer), the un-revised web page is displayed.
In trying to remedy the situation. I fear that I've been digging a deeper and deeper hole and may have screwed things up even further.
Help!I'm really confused. So let's back up about 4 steps.
Local site files should be on your hard drive. The same computer hard drive that Dreamweaver is installed on. For sake of argument, let's put your site files into a folder called YourSiteName on your C: drive. Do not use any spaces or special characters in your folder or filenames.
LocalSite = C:\YourSiteName
Then tell DW where to find that folder as in the screenshot I posted earlier.
Next, define your remote server settings and tell DW which root directory your hosting company told you to use for your site files. Some hosts use public_html or htdocs or www. And some hosts don't use one at all in which case you leave that field blank.
See screenshots.
Next hit More Options.
Hit the test button to confirm you can connect to the remote server.
Nancy O. -
Create PDF from Web page using Acrobat 9 Pro
I am trying to create a PDF file from a web page. The alt tags for images is not being recognized, and the reading order bounces all over the page (not the order of the web page). For example, the 1st text item on the page is #7 in the reading order, and the #1 item is an image half way down the page. All the documentation I can find says Acrobat will read top to bottom, left to right, but it's not. Any idea how to fix it?
Acrobat is using the underlying mark up of the rendered HTML page.
This may or may not provide an adequate input to Acrobat when it is noodling out how and what to tag.
I suspect you may find that, to obtain an adequately tagged PDF, you may have to capture the web page content with the create bookmarks and create tags options off.
Once you have the PDF make working copies.
Try letting Acrobat tag this already created PDF to see what happens.
You may have to manually tag the PDF.
n.b., The default read order for western language can be altered by user selections in the accesibility setup or by selection in the PDF page(s) Page Properties.
Be well... -
Create PDF from Web page using Acrobat X - Page Order
I have a structured web site that is in fact Program Help The web pages are structured as follows:
index.html - Main Topic Index page with links to all topic subject index pages
topic/index.html - Topic Subject Index Page with links to all subject pages
topic/subject.html - Subject page
.....etc
Using Acrobat 5 "Create PDF from Web Page" created a perfect logical PDF page structure in the page order of of the web site. In Acrobat 5 page 1 was the Main Topic Index Page, page 2 was the 1st Topic Subject Index Page, page 3 was the 1st Subject Page, then the 2nd subject of the 1st Topic, etc. until the Topic Subjects were exhausted after which the 2nd Topic Subject Index Page and so it went on. As a result the bookmark structure was sensible. The page order was as follows:
Main Topic Contents
Topic 1 Contents
Subject 1 of Topic 1
Subject 2 of Topic 1
Topic N Contents
Subject 1 of Topic N
Subject 2 of Topic N
Acrobat X (just purchased) produces a differently structured PDF from the same HTML pages. The order is:
Main Topic Contents
Topic 1 Contents
Topic 2 Contents
Topic N Contents
Main Topic Contents (a second time)
Subject 1 of Topic 1
Subject 2 of Topic 1
Subject N of Topic 1
Subject 1 of Topic 2
Subject 2 of Topic 2
Subject N of Topic N
Question: Is there any way I can get back with Acrobat X the same page order I got with Acrobat 5?
Any help appreciated. The website is www.caliach.com/caliach/vision/help/index.html
ChrisAcrobat is using the underlying mark up of the rendered HTML page.
This may or may not provide an adequate input to Acrobat when it is noodling out how and what to tag.
I suspect you may find that, to obtain an adequately tagged PDF, you may have to capture the web page content with the create bookmarks and create tags options off.
Once you have the PDF make working copies.
Try letting Acrobat tag this already created PDF to see what happens.
You may have to manually tag the PDF.
n.b., The default read order for western language can be altered by user selections in the accesibility setup or by selection in the PDF page(s) Page Properties.
Be well... -
Can't fully download long web-pages using HttpURLConnection
I'm using these two methods:
/**keeps document encoding or sets Cp1251 as default
* @param uri is uri to document
* @return {@link InputStreamReader} with encoding
public static InputStreamReader getInputStreamReader(String uri) throws IOException{
URL url = new URL(uri);
HttpURLConnection urlConn = (HttpURLConnection)url.openConnection();
urlConn.setConnectTimeout(timeout);
urlConn.setDefaultUseCaches( false );
urlConn.setUseCaches( false );
urlConn.setRequestProperty( "Cache-Control", "max-age=0,no-cache" );
urlConn.setRequestProperty( "Pragma", "no-cache" );
String encoding = urlConn.getContentEncoding();
if(encoding == null || encoding.equals("") ){
String Content_Type = urlConn.getHeaderField("Content-Type");
if(Content_Type.contains("charset=")){
String[] t = Content_Type.split("charset=");
if(t != null && t.length>0){
encoding = t[t.length-1];
if(encoding == null || encoding.equals("")){
encoding = "windows-1251";
InputStreamReader isr = new InputStreamReader(urlConn.getInputStream(), encoding);
return isr;
/**Returns content in default charset
* @param uri is uri to document you want to get
* @return String with encoding equal to {@link Charset.defaultCharset()}
public static String fetchEncodedURI(String uri) throws IOException{
InputStreamReader isr = getInputStreamReader(uri);
ByteArrayOutputStream baos = new ByteArrayOutputStream();
OutputStreamWriter osw = new OutputStreamWriter( baos, Charset.defaultCharset());
char[] buffer = new char[256];
int n = -1;
while ( (n = isr.read(buffer))!= -1 ){
osw.write(buffer, 0, n);
String outputString = new String(baos.toByteArray());
osw.flush();
osw.close();
baos.flush();
baos.close();
return outputString;
}The problem is that some pages are cut! I make output of result string (outputString) ans see for example just 2/3 of the real page content.
Is it possible to overcome this difficulty?
Edited by: Holod on 01.10.2008 11:31ejp wrote:
Personally, I'd suggest reading the whole page as bytes into baos and covert to string with one call to boas.toString(encoding)Or use a StringWriter. The way you're doing it is the worst of both worlds.Can you help me please with a sample link?
Or please tell, is it right solution?
/**Returns content in default charset
* @param uri is uri to document you want to get
* @return String with encoding equal to {@link Charset.defaultCharset()}
public static String fetchEncodedURI(String uri) throws IOException{
InputStreamReader isr = getInputStreamReader(uri);
ByteArrayOutputStream baos = new ByteArrayOutputStream();
//OutputStreamWriter osw = new OutputStreamWriter( baos, Charset.defaultCharset());
StringWriter sw = new StringWriter();
char[] buffer = new char[256];
int n = -1;
int previousPosititon = 0;
while ( (n = isr.read(buffer))!= -1 ){
sw.write(buffer,previousPosititon,n);
previousPosititon+=n;
//osw.write(buffer, 0, n);
//osw.flush();
//String outputString = new String(baos.toByteArray());
String outputString = sw.toString();
//osw.close();
baos.flush();
baos.close();
return outputString;
}Edited by: Holod on 03.10.2008 5:41 -
why can't i print a web page, using windows vista 64, HP photosmart 8250?
This software can help print from the web:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01812475&cc=us&dlc=en&lc=en&product=443024&tmp_...
This utility can help determine if things may not be setup correctly:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you. -
Converting .docx to a pdf using Acrobat X, it says file type unsupported.
Please Help! When I try to convert to convert my .docX to pdf using Acrobat Pro X, it says file type unsupported.
When I use "save as" "pdf" in Word, it allows me to save the file as a pdf, but then the URL links in the resulting pdf will not work. They all say page not found. (The url links work in the Word document.)
I am using a Macbook pro, 10.6.8; Microsoft Word 2008 for Mac; and Acrobat Pro X
Any help, greatly appreciated.Hello, thank you for responding.
Yes the url links start with http:
For example when I type in
http://canberracontemporaryartspace.wordpress.com/2013/07/06/staying-out-of-trouble/
in the word document and click on it, the link works; but when I save it as a pdf it says "not found"
And then when I type in
http://www.camberwellspecialists.com.au/what-is-skin-cancer.html
in the word document and click on it, the link works; but when I save it as a pdf it says "page not found" -
How can I add a podcast episode to an existing web page using iWeb?
How can I add an episode to an existing web page using iWeb?
I could probably figure this out but I am afraid if I make changes to the site and re-upload it to the podcast area I will have just doubled it. I see them repeated from time to time.
What is the proper protocal? Thanks
Mac G4 Mac OS X (10.4.3)Hi apple-owner,
Method 1.
To create this scatter-plot, I selected the whole of Columns A and B. (Shift click on the Column reference tabs).
The plot ignores blank rows, but they are "ready" for new data:
Method 2
If you did not select whole columns, you can extend the "active" rows. Rows 1-5 selected:
Add more data rows and drag the fill handle (small white circle, bottom right) down
Regards,
Ian. -
how can I convert .pdf file to .doc using the free adobe reader app? when I try to convert the .pdf file it asks me to sign in. when I click on "sign in", I am taken to a service subscription page. So, no free conversions using free adobe reader app?
As has been mentioned Adobe Reader cannot export PDF page content. Nor can it create PDF or manipulate PDF page content.
What you can do is use one of Adobe's online subscription services. Two provide for PDF to Word export.
There's ExportPDF and PDF Pack.
Be well... -
IPhoto still won't make web pages using the comments field
I am someone who makes use of the comments field in iPhoto. I don't edit the title, because I thought it edited the photo file name (perhaps only in earlier iPhoto versions). Unfortunately, the Apple's tools for making a web page from iPhoto '08 seem to still use the title field only and not the comment field. That means that I have to edit all titles (to blank or a proper title) if I just want to show an annotation on just a few photos in a web page. At least the comments field defaults to blank, so I normally use it, along with the Better HTML plugin to make web pages, http://www.geeksrus.com/software/betterhtmlexport/
Now, the web pages produced by Apple are now as good as and even better than the BHTML templates, and I'd like to use them. But this problem with the comments means I can't quickly convert my old photo albums to something that makes nice web pages using my annotations with the iPhoto tools.
Does anybody know of any solutions to this problem? E.g. a script to copy the comments field to the title field?I know what you mean. I can't believe that after so many versions of iPhoto that have supported publishing of some sort that such a basic and obvious feature still hasn't been implemented. It can't take that much effort to add. I'd rather have that than the new (and IMHO completely useless) "Events" feature. Speaking of which, does anyone know if there is a way to turn it off? It's annoying the heck outta me. I hate it.
-
We are planning to Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed. I have tried using the AIR appliaction and it worked, But our requirement is NO INSTALL to the user machine for the silent printing. It is just from web page and silent printing to the default printer to the desktop/Laptop. Can anyone share your thoughts and experience with us. It will be very helpful..
For AIR : I tried the thread Re: AIR and PDF showing/silent printingHey CodeMonkey & Ross,
Did you either of you ever find a solution? I'm stuck too, it seems I can get remote printing on all these PDFs to work but it just prints a blank page since I've been using Javascript in the browser, not Adobe's (they are Engineering drawings that I do not have permission to edit so I can't just insert code into them but I need to make work instructions). I've been scouring the internet for hours now, it seems that this thread is the only relevant/useful one at this point. No one else was trying to achieve this for similar reasons to mine.
Thanks guys,
Lox -
Captivate 6: Can I hyperink to a web page from an image?
In Captivate 6, can I hyperlink to a web page from an image?
You can fill a smart shape with the image using the Texture button, but beware: choose a shape with the same size as the image. Maybe Sreekanth is telling the same, but I didn't get his 'assign custom image to it'? And if you want to have a pause for a shape button, you have to check it in the Timing accordion.
Another approach is to put a click box on top of the image. You can open the URL in another window using the small triangle drop down list, and be sure to uncheck Continue Project to avoid that the playhead will continue.
Lilybiri -
How to embed 3D models in web page using JAVA?
Hello
I'm doing a project at University to create a virtual tour of a village. I am creating the buildings in MAYA using polygon planes and cubes and then exporting to VRML.
I plan to embed each individual model into a separate web page. Then when the user clicks on a location in a 2D map they will be taken to the web page containing that building.
However, I can't work out how to embed these 3D models into web pages using JAVA. Can anyone help me with this, please?
Also, I've been told to use JAVA 3D to interact with the project but am unclear as to how JAVA 3D would be used in this project - aqny ideas/suggestions welcome!
M.If you use Java-plugin, you can embed Java3D in a web page.
Here is the URL(http://www.geovista.psu.edu/products/demos/LorenzAttractor3D/index.html) which used Java3D.
I hope this helps.
Masa
Maybe you are looking for
-
Hi everybody, I have an ESB project which reads a file from a folder and writes it into another folder. The issue is that sometimes it works ok, but some others the in adapter fails and I get this error: JCA inbound adapter service listener for "SUBI
-
CS-MARS user authentication using Cisco ACS
Hi, I would like CS-MARS (Web Interface) user authenticaiton to be done by Cisco ACS Server. Please let me know, either it is possible or not? And if possible then reply how to configure it. Thanks and Regards, Ahmed Shahzad.
-
Hi Collegues, I have uploaded an image under MIME in BSP Application. Ex: https://XXX.ABC.com/sap/bc/bsp/sap/zpic/image. This url is accesible and image can be viewed. Also used this url in SO10 text and triggered the mail. In SOST also image is visi
-
I am installing Photoshop 12 on a new Windows 7 based PC. After installation, I tried to run the updates. They gave an error message and would not install. What to do next?
-
I am using Photoshop CC, how do I scan an image (hand drawn) into photoshop?
I am using Photoshop CC, how do I scan an image (hand drawn) into photoshop?