Can't convert from cover mode to communicator mode

Hello every body.
I 've just bought an E-90 communicator.
the first thing I noticed that when I open the display part, sometimes it doesn't convert to the communicator and stays in the cover mode.
Can any body help me out on this??
does any body know where the problem may be?
Thanks very much

Any Help??

Similar Messages

Can not switch from organizer mode to editor mode in adobe premiere elements 12.

After successfully installing and registering my new adobe premiere elements 12 and had created the organizer, I still can't switch from organizer mode to editor mode to edit a file (photo).

Alfredo Agorilla
What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to 12.1 Update via a project's Help Menu/Update? If not, please do so.
You wrote
I still can't switch from organizer mode to editor mode to edit a file (photo).
Just how are you trying to do that...
a. Are you in the Elements Organizer 12 workspace, right clicking the photo's thumbnail, and selecting Edit with Premiere Elements Editor
or
b. Something else.
Is there an error message that results when you try to switch "from organizer mode to editor mode" and cannot?
When you mention "....to edit a file (photo)", I wonder if you are not trying to get to Photoshop Elements 12 Editor, not Premiere Elements 12 Editor, from the Elements Organizer 12.
Please supply a step by step of what you are doing so that we can be sure that we are in sync on the details that we are using to work through your issue.
Thank you.
ATR

Can't print from XP mode unless it's attached to the VM

I've followed the insructions here:
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/how-do-i-install-a-printer-in-xp-mode/9dc7f464-2bea-42d1-9c45-dea8e039ecd5
I have a Windows 7 Professional machine that our building management guy uses. The software our system uses has not yet been updated to a Windows 7 compatible version so I've set up XP mode on his machine, installing the software in that VM.
He is using an HP LaserJet 1300 printer connected via USB. I've followed the instructions at the link above, however after removing the USB printer from the VM (putting it in Shared mode) and restarting the VM I can no longer print to the printer. I
don't believe it's a driver issue as if I reattach the printer to the VM I can print fine (but Windows 7 can't). If I move it back to Shared status then Windows 7 can print to it but the XP Mode VM can't. Is there a step I'm missing somewhere?
Thanks in advance.

Hi,
As I know, if you have USB based printer, you can install driver inside VM and use it directly. If your printer is available to Windows 7, it will be shared automatically
I have noticed that some USB devices just don't work well from XP mode if the printer driver is not installed correctly. If your guest operating system is Windows XP, you must manually install the printer driver for each printer.
Please install the printer driver in XP mode.
Furthermore, you can refer this link to configure a network printer for a virtual machine.
Scenario 3: Print from a virtual machine.
http://technet.microsoft.com/en-us/library/dd744684(WS.10).aspx
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

How can I convert from Modbus raw data to engineering units using a formula?

Within Lookout, I have several Modbus numerical input types that do not have a linear corespondence to the Engineering values they represent. How can I display these values accurately using a formula to convert from the raw data to an engineering value?

I don't quite understand your reply. I'm using Lookout 6.0.2, logged in as Administrator, in Edit Mode. The Modbus object is named RTU06_SAV. The Active member is 30002 with an alias of SAVfmSMT_RSL.
Following your instructions, I opened Object Explorer and right-clicked on RTU06_SAV.
This opened a menu containing: Refresh, Cut, Copy, Rename, Delete, Edit connections..., Edit Data Member Configuration, Configure Network Security and Properties.
I assumed that I should select Edit Data Member Configuration, but maybe I'm wrong.
Within Data Member Configuration I can set up Linear Scaling between Raw data and Engineering data. I know how to do that, but what I need to know is how to convert Raw data to Engineering data using a formula representing a non-linear transformation (such as a converion to a logarithmic value or perhaps a formula derived by fitting the formula to a curve on a calibration chart).
Once I have this my Engineering data can be represented on a control panel as both a numeric value AND as a correctly reading Gauge. It can also be properly represented on a HyperTrend graph.
What do you suggest?

How can I convert from color balance in FCE to color balance in FCPX?

Let me start off by saying that I've been having an issue with a project in Final Cut Express - a project I'd put a lot of time into and thought I was finished with. Before continuing on, I encourage you to take a look at my other thread: https://discussions.apple.com/message/18702933?ac_cid=op123456#18702933
Realizing that there may be no one who can walk me through fixing my project as is, I decided to download a trial version of Final Cut Pro X and see if I could replicate my project there and have more success (after all, it was only a matter of time before I switched anyway).
So, in my original project in FCE, I keyed a lot of frames with different color balances. I downloaded the Ripple Training color balance effect to do just that, but the sliders are set up differently. In FCE, they range from -1 to 1. In FCPX, they range from 0 to 1. I'm wondering how I can conveniently convert the values from FCE to FCPX. Being terrible at math has made this much harder.
Just by drawing a diagram, like the following, I can figure out the basics:
FCE
[-1]-----[-.5]-----[0]-----[.5]-----[1]
is equal to:
FCPX
[0]-----[.25]-----[.5]-----[.75]-----[1]
Since I have very specific numbers, not all of which can be easily converted using a basic diagram like the one above, I definitely need some help here. For example, one of the values in FCE is .77. What would that be equal to in FCPX? It's probably something simple, but like I said, I'm stupid when it comes to math.
Thanks to anyone who can provide me with some help here, although I still hope that I'll end up having no reason to redo everything in FCPX.

Well, the "math answer" is .885…but I'm afraid that's not likely to be of much help. FCPX and FCE have absolutely nothing in common, including filters land color correction. So even if you sent the time comverting all your numeric values, I'm guessing you'll wind up with a mess and be very frustrated with all the time wasted in the workaround.
If I read your original FCE thread correctly, I if it were my project., I'd do a test on a short clip in X to see whether yoi can the effects and quality you expect. If you can, great. Build you project from scratch and learn a new NLE at the same time.
Good luck.
Russ

Mac Convert MPEG to AVI, FLV to AVI, F4V, and Quicktime MOV to AVI. You can also convert from AVI to MPEG or other major formats.

What is tyhe best video /audio converter to use on a Mac? To convert
Convert MPEG to AVI, FLV to AVI, F4V, and Quicktime MOV to AVI. to convert from AVI to MPEG or other major formats?

I prefer using Mac Video Converter software to do video conversion. I convert Quicktime MOV to AVI so that I can play the video on PS3.

Can I convert from pdf output into excellsheet in smartforms

My smartform output is in pdf form now .Can i convert it into excellsheet by using save option.
Moderator message: please do some own research before asking.
Edited by: Thomas Zloch on Feb 21, 2011 12:49 PM

Video into PDF? Sounds reasonably strange. In any case, the only way to use such files would be to extract the components in Acrobat. Select the actual video with the Touchup Object tool, righ-click, save to disk. Depending oin the specifics of the PDF fiel this may not work, though.
Mylenium

I can't recover from "recovery mode" what do I do?

One day I attempted to turn on my iPad and a black screen should up and the little iTubes symbol pops up with a picture of a cable pointed towards the symbol.
So I attempted to hook it up to my computer to connect to iTunes. I figured this was because I was supposed to update my iPad to the newest version but was procrastinating. So I figured this was why my iPad wasn't working.
I connect my iPad and iTunes won't even recognize that the iPad was connected.
My iTunes also wasn't working because it was 2-3 versions behind. So I went through this whole ordeal, I ended up having to completly delete and reinstall iTunes to get it to work. Finally I got version 11.2.2.3 install up and running.
I connect my iPad 2 again and an error pops up saying:
"iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes."
ok. So that's the problem, my iPad 2 is in "Recovery Mode"
So I go ahead and click the Restore button and it starts to download "iPad Software Update" which is a 1.06GB download.
It downloads and gets to varying download percentages. The farthest it's gotten is 65.7MB out of 1.06GB. And it downloads super super slow. Starts off at an Est Download Time of 1 hour all the way up to 10 hours. I have a fast computer and good connection, I don't know the exact time of a regular large download, but I know that I've downloaded movies well over 2GB in an hour or less.
Intermittantly the download will pause and it will give me the same error message as before: "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes."
All I have to do is hit OK and resume download. But eventually, another error will pop up which will end the download:
"There was a problem downloading the software for the iPad "iPad". An unknown error occurred (9006)
Make sure your network settings are correct and your network connection is active, or try again later."
And that will be it. If I try to resume the download after that last error message, the download will start from the beginning.
So as of right now, I have a $800 paper weight. And Apple wants me to pay them just to talk to someone.
How the heck do I get my iPad 2 out of recovery mode!!!!
Here is some info on my iPad if it helps.
iPad 2 64GB WiFi 3G
Model A1397 EMC 2424

1.Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
2.Plug the device's USB cable into your computer only.
3.Hold down the device's Home button as you connect the USB cable to it.
4.When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
5.Use iTunes to restore your device.
Additional Information:
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself. If you want a faster way to solve iPad Stuck in Recovery Mode, try iPad data recovery software.

How can I convert from 8.2.1 to 7.1.1?

I would like to convert the following files from 8.2.1 to 7.1.1. Is this possible without just having someone else do it inside 8.2? If not, then can someone please convert them for me? They are listed in order of most needed. Thanks for the help.
Attachments:
Single_Temp_RampPID_Ver1.vi ‏89 KB
PiezomotorControl version2.vi ‏41 KB
PiezomotorControl.vi ‏48 KB

Somebody needs to to the 8.0 to 7.1 conversion inside 8.0. Here's my attempt, see if they work.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Piezo71.zip ‏123 KB

How can i convert from alac to mp3 and export to artist/album hierarchy

I am trying to populate a 32GB SD Card with music to listen to in my car. My itunes library is largely in apple lossless format, but the car stereo does not play that format.
I have created a playlist of all of the music I'd like to have on the SD Card (but its in apple lossless format).
So what I'd like to do is:
a)     Bulk convert a large number of apple lossless files to MP3.
b)     Export the MP3 files to an external Finder folder, organized in Artist/Album hierarchy
c)     Delete the MP3 files from the itunes library so as to have just the apple lossless version maintain in the itunes library
Sounds pretty simple, but I'm having a devil of a time trying to figure it out.
I can find a way to do the conversion and export the MP3 files (and subsequently deleted from the itunes library), but they will not be organized by Artist/Album in the Finder folder.
Similarly, I can export a bunch of files from itunes to a Finder folder and have it be organized by Artist/Album.
I just can't do one followed by the other.
I suppose this would also work if instead of exporting the newly created MP3 files, it would establish a new playlist in itunes with these. Then, I could just export them and have them then organized by Artist/Album; and then I could delete all of the MP3 files in the playlist.
Any thoughts or ideas on how to accomplish this goal? (I do know the manual way of doing this, but am trying to figure out a faster, more elegant way).
M

I ask because you wrote, "I just can't do one followed by the other".
You can. Just do one followed by the other.
Convert the files to mp3.
Put them all into a playlist. A smart playlist with Kind is MP3 and added in last one day will do it for you.
Select the songs in teh smart playlist
Run Export to Album Folders script.
Select all the songs in the playlist then Command Delete to remove them from iTunes.

Convert from Evaluation Mode to Production (Cluster) Mode

Is there any documentation on how you can convert a single server VDI 3 evaluation mode server, to a clustered VDI environment.
Is it just doing a backup of the database in evaluation mode, and then doing a restore into the cluster once its up? Are there any other configuration files that need to be maintained as well?
Thanks

Hi,
Yes thats doable.
While configuring multihost setup.Run vda-config on all hosts(1 Primary(once) and two secondary) .On one of the secondary host you may restore the data.
In evaluation host
Execute /opt/SUNWvda/mysql/bin/ndb_mgm
at ndb_mgm prompt execute START BACKUP
Check if a directory "BACKUP" got created at the location "/var/opt/SUNWvda/mysql-cluster
Perform vda-conig -u,it should ask for restoring this backup
Run vda-config on all hosts(1 Primary(once) and two secondary)
Save the backup as /var/opt/SUNWvda/mysql-cluster/BACKUP in the secondary server.
Execute /opt/SUNWvda/mysql/bin/ndb_restore -b <backup #> -n <nodeid #> -r - - backup_path=<path> on the same host.
This should work.
AFAIR there are some known issues here.So you may also want to have a look at
http://wikis.sun.com/display/VDI3/Backing+Up+the+VDI+Configuration
--Chirag

Can you convert from Writer stream to String ?

Hi all !
I'd like to know if it's possible to convert a Writer stream to a String Object....
FileWriter writer = new FileWriter("book.xml");
Marshaller.marshal(book, writer); // I would need to convert writer to StringI've inspected the StringWriter class but I couldn't still get anything from it.....
any clue ?
thanks a lot
francesco

What do you mean that you couldn't get anything out of StringWriter? What was wrong with "toString()"?
Another way would be to wrap an OutputStreamWriter around a ByteArrayOutputStream then create a String with the byte array backing the ByteArrayOutputStream.
The real question, however, is why?
Edit: Man-o-man-o-man am I slow today, or what? And didn't this guy get jumped on quickly. ;-)

Can't convert from CMYK to RGB in Illustrator CS6

I'm moving art over to a new document. It was created in CMYK. The new document has a color mode of Basic RGB. After pasting the art I select it all, and choose Edit | Edit Colors | Convert to RGB. After saving and re-opening the document, the art once again has CMYK attributes, not RGB. What am I doing wrong?

That might be it, Jacob.
It's when, for instance, I have the Appearance window open and shift-click on the stroke or fill to see the color attibutes (rather than simply looking at the swatches). It kept showing up in CMYK.
But making that change in the flyout seems to have it showing properly.
Thanks!

How can I convert from .wmv format to one that AppleTV will play?

I am a Windows user and I want to convert .wmv files to a format that will play on my AppleTV and 5th generation iPod. I don't think that QuickTime Pro will do this.
What are the best solutions to convert video from various formats to the format that is needed for my AppleTV and iPod?
Thanks,
Rob

suikris wrote:
right, haven't noticed that... why did i assume that people talking about apple tv and handbrake would be using macs?
never assume. handbrake is available for windows just like itunes, so you could easily use ATV without ever having a mac.

Black Pages - Convert from Word to PDF

When I convert a Word document to a PDF, the pages on the PDF document are black. This only happens on select Word document that use a specific cover graphic. I've sent the same document to a co-worker and they were able to convert the document to PDF with no issues. I have verified my preferences with my co-worker and these are the same. I have the latest version of Adobe Reader (10). I was previously able to convert a Word document with the same graphic to PDF without any issues. Any ideas on how to fix this?

Adobe Reader can't convert from Word to PDF.

Can't convert from cover mode to communicator mode

Similar Messages

Maybe you are looking for