Can't copy files to network client's folders

We just switched from ARD 2.0 to ARD 3.0. ARD 3.0 is a great product - if it works. I can only copy files to ARD-clients, if I copy to the local hard disk, i. e. if it is a local client or if it is a network client and I copy to the top level of the volume. But if I copy files to the network client's desktop it doesn't work. I think the reason is that the network client's desktop is located on the server and not on the local hard disk.
The same problem occurs if I use the new feature to copy files from or to a client using drag-and-drop with the observe window. It works with the client's local hard disk, but not with folders located on the server. This time there is no error message, but the message "waiting" - and the waiting never terminates.
Has anybody a helping idea? Thanks!
Greetings from the country of the football (soccer!) world cup!
Horst

I had the same problem, but I managed to fix it.
In WGM check that the sharepoint of your users Home Folder is set to owner root with Read and Write permissions.
I also created an ard_admin group in WGM and enabled open directory management on the client Macs. (Page 62 of the ARD admin Guide.)

Similar Messages

Can't copy files to network share using migrated account

Man this is so bizarre. I got a new MacBook Pro and used the Migration Assistant to copy over everything from the old MacBook Pro. Everything seems to work except I can't copy files to my desktop via a network share.
What's totally bizarre about this is that I can delete and rename files from the network share! I can also drop into the command line and try copying - at first, I get "Operation not permitted", but if execute the command again, it works!
In the Finder, when I try to copy a file, I get a window that says:
"You may need to enter the name and password for an administrator on this computer to change the item named "xxx". If I click stop at this point, a zero-byte file is created on the target machine.
If I click Continue, I get another window that says "The item "xxx" contains one or more items you do not have permissions to read. Do you want to copy the items you are allowed to read?
If I click Continue, I get a final window that says "The operation cannot be completed because you do not have sufficient privileges for some of the items".
Note that this also happens in the opposite direction when I connect to my notebook from my desktop.
Also note that this only happens with the account that was migrated. I can successfully copy files if I setup a new account.
I've repaired permission on both machines. My old account on the old MacBook Pro still works fine, btw.
I've seen other posts with people having this problem, but I've yet to see a good solution.

I had the same problem, but I managed to fix it.
In WGM check that the sharepoint of your users Home Folder is set to owner root with Read and Write permissions.
I also created an ard_admin group in WGM and enabled open directory management on the client Macs. (Page 62 of the ARD admin Guide.)

Can't copy file to network drive as "The operation can't be completed because the [Filename] is in use

Following upgrade to Yosemite I now can't copy files from iMac to my network HDD in external media center. I have iMac connected by wi-fi to airport extreme and media center connected to airport extreme by cable. I can see the HDD as a network drive on my iMac and can initiate the copy but right when copy process is finished I see "The operation can’t be completed because the [Filename] is in use". I am trying to copy different media files downloaded from internet which are not used by any program and stored on my hard drive. I actually can copy small files of 1mb and it works but anything above 20mb is halted. I can also move/copy/delete the file on iMac. Cant understand the nature of the problem. I tried to format external HDD as EXT2/EXT3/NTFS but same outcome.
OS X Yosemite 10.10.3 | iMac late 2009 | Apple Airport Extreme | Dune HD Base 3D mediacenter

Have you tried a restart or logging out/in?
Some more ideas.
Re: The operation can’t be completed because the item “ " is in use.

Can't copy files to network drop box

I'm running an Ubuntu server with netatalk (afp server) running and serving a couple afp shares. In one of the shares, I have a drop box directory that is owned by user "foo" and has group "bar". My Mac system username is "dude" and I also have a user named "dude" on the server. On the server, "dude" is a member of group "bar". The drop fox directory has permissions drwx-w----. The goal is to have a drop box that only "foo" on the server can read, but "dude" and other users in group "bar" can write to. I have other directories on the share with permissions drwxr-x--- foo:bar that "dude" and other users can read but not write to. In Mac OS X when I connect to the server as "dude" and try to copy a file to the drop box, I'm notified that I won't be able to see the copied file and then the copy fails with "The operation can't be completed because you don't have permission to access some of the items." The files I am trying to copy are owned by my user and I tried changing their permissions to rw-rw-rw but no luck. I also tried adding +x for the group on the dropbox. I checked the netatalk configuration and there's no permission mask being applied to the share.

I had the same problem, but I managed to fix it.
In WGM check that the sharepoint of your users Home Folder is set to owner root with Read and Write permissions.
I also created an ard_admin group in WGM and enabled open directory management on the client Macs. (Page 62 of the ARD admin Guide.)

Can not copy files to network share

Hi everyone.
We have a Windows Server 2003r2 64-bit. There are a few network share on this server and folders with user profiles (we use roaming profile in our infrastructure).
A few days ago some users lost possibility to copy files on any network share on this server. Windows says "Not enough space on the disk", but free space on server is about 12% (100gb). If copy files to other server, everything is OK.
Log on user to another PC didn't help.
If join user to group "Local admin" on server - files copying succesfully.
Creating new folder with FC permissions for this user didn't help.
FSRM role isn't installed, no quotas.
Anyone ancountered whith similar situation?

Hi,
It seems that you configure disk quota on users to limit the disk space usage.
Configuring Disk Quotas on NTFS Volumes
http://technet.microsoft.com/en-us/library/cc758877(v=ws.10).aspx
If you configure disk quota on users, users cannot save data on the disk when the users exceed their quota limit. By default, quota limits are not applied to the Administrators local group. Thus, the uses joined to the "Local admin" group don’t have
the issue.
Managing Disk Quotas
http://technet.microsoft.com/en-us/library/dd277427.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can't copy files to network drive

I have a network drive attached to my Airport Extreme partitioned into 'Network Drive' and 'Network Backup' partitions. I successfully backup wirelessly to Network Backup. I'm sure I have files currently in the Network Drive partition but I can't see them when I open the partition in Finder. I have a folder with files that I want to copy from a local drive to Network Backup. However, after I drop the folder onto Network Backup, I get the following series of dialogs.
Please advise.
TIA,
David

Through the magic of rebooting, this is now working. Still curious what might have been the root problem here.....

Can't copy files to another Mac on network (Yosemite to Yosemite)

For years I've had no trouble copying files back and forth across my home network, but after recently upgrading (via fresh install) to Yosemite on my desktop, I can no longer copy files to my MacBook Pro. This is a simple drag-and-drop to a mounted network drive.
Specifically, the copy dialog box appears, but as it finishes, I get an error message and the transfer is cancelled.
I've tried changing the permissions, making the destination a Shared Folder, and messing around in every way I can think of. I've never had this problem with any other version of OS X or with any other computers. This is a major disruption to my workflow — has anyone experienced this lately?
My workaround for the moment is to copy to a NAS device, and then copy down from the other computer. But this transfer is much slower and requires me to touch both computers to make it happen. That, at least, proves that both systems are capable of copying files via network, just not from desktop to laptop in this instance.
Please help!

For whatever reason, the problem seems to have righted itself. From what I can tell, I did four things:
Delete all `.DS_store` files on both computers.
Run DiskWarrior on both computers, booking from the USB thumb drive and performing operations on the system drives.
Mount both volumes on opposing computers. Don't attempt any copy or move actions until both systems are connected to one another.
(The one which I feel worked) Enable *both* SMB and AFP networking formats. Both computers should have both options checked. Screenshot below
If it's not one of those above options, I have no idea why, but it works for now.

Can't copy files to a network share but can copy folders...

I frequently use a network share at work. I can view files off of it fine. I can erase files off it. I can copy folders to it.
However, any time I copy any single file I get the following error.
"The operation can’t be completed because you don’t have permission to access some of the items."
This occurs for every file I've tried. From txt files to jpgs to docs. Everything gives that error and fails. I'm at a loss and it's totally killing my productivity.
It's a linux based share and all permissions on that box are correct. My account can easily copy files from other machines. Also, the fact that files and modifications work on this computer seems to prove that as well. I think it's pretty apparent that the cause of this error is on my laptops end.
I've verified my disk permissions. I have no clue what could be causing this.

Look at this thread for discussion of this issue.
http://discussions.apple.com/thread.jspa?threadID=2382501
Search is your friend.

Can't copy files to server - multiple instances of same user in getinfo

I can't copy files from one of my desktop computers to a server that I administer, via AFP. When I try to do so, I get the following sequence of messages:
1. "You may need to enter the name and password for an administrator on this computer to change the item named [file]"
2. "The item [file] contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?"
3. "The operation cannot be completed because you do not have sufficient privileges for some of the items."
BEFORE I attempt to copy any given file to the server, Getinfo shows that I have read and write access; unknown has read-only access, and everyone has read only access.
AFTER I attempt and fail to copy the file, another instance of "Me" appears in the Getinfo, with Custom privileges. The other users and permissions remain as above. Even after I unlock the file, I am not allowed to edit permissions for any of the users.
I have repaired permissions on the client. This issue has persisted through 10.5.2 and the 10.5.3 upgrade.
I can successfully copy to the server from another one of my computers. It's just this one client machine that's giving me trouble.
What gives???

It looks like a configuration problem with our servers/network. We have tried several new laptops with 10.6 in different parts of the company, with different network switches and locations, and get the same result. Anything with 10.5 or older has no problem. I broke the raid1 apart on my Mac Pro and installed 10.5 on the second drive, and have no problems now.

Help can't copy files just says screen sharing available?????

I can do everything else but for some reason can't copy files. i've noticed that suddenly all computers have screen sharing available. i know its not the clients as it works fine on another mac. but on this one it just fails all the time. i've checked the version and they are both the same 3.2.2 but i am flumuxed. i reinstalled last week and thought it had resolved but then suddenly today it happened again. does anybody know why this is happening?

Roboloko
+Is this the recommended procedure from apple?+
Not really. It's simply common troubleshooting techniques that have been used time and time again by many who've experienced problems generally. Some are recommended by Apple. Search as many of the boards as you can and you'll find these tips/recommendations mentioned countless times as well as many others. Sometimes its not something directly related to ARD that is causing ARD to have a problem.
+did you after some test get to the conclusion that this will solve the problem?+
No testing as such. Sometimes it solves the problems other times it does not. It's offered as something for you try before you contemplate something more drastic such as reinstalling a clean OS followed by a reinstall of ARD. Or ultimately a reformat and reinstall.
I can see from your later post that it's not worked for you. I'm not surprised. Sometimes there are deeper underlying problems that only a reinstall or reformat and reinstall will 'cure' or possibly a solution offered by another poster? What was offered here was only meant as a possibility that might assist. As a computer user - regardless of platform - you should know this?
Tony

Can't copy file from SAP-directory to FTP server

Hello,
I can't copy files from the SAP server to the FTP server. The file is created with OPEN DATASET and CLOSE DATASET commands and is placed in the SAP-directory S:\usr\sap\DEV\DVEBMBGS00\work.
I can see and read the file with transaction al11, so I know it's there.
But the FTP command always gives the same error:
S:\usr\sap\DEV\DVEBMBGS00\work\[FILENAME] errno 22: invalid argument
I can connect to the FTP, but the put command keeps failing. Somehow, the file in the SAP directory can't be read, it seems, even when
Any ideas?
Thanks in advance.
Dave

Ok, I found out that I have to use SAPFTPA as RFC destination type, instead of SAPFTP, otherwise the folders can't be located.
But with SAPFTPA I can't seem to connect to the FTP server. I've tested the connection with sm59 and it works, but for the FTP it doesn't work. When I use SAPFTP as destination type, it still works.
What can I do?
Thanks.

Can't copy files from mounted DMG. What's up??

So all of a sudden, I can't copy files from mounted DMG files. It's strange because if there is one file and I drag it to another location, like desktop, it won't copy. If I drag 2 files from the mounted DMG to the desktop one of them copies. If I drag 3, then 2 copy... it's always all but one of the files... never all of them.
I've tried repairing permissions but nothing works. I'm at a loss...
thanks
D
iMac Core Duo 17", 1.5 gig RAM Mac OS X (10.4.8)

Try holding option when you drag the files. This tells the mac to move the files to the desktop of your computer not the desktop folder of the DMG (usually a hidden folder)
If that doesn't work it may be that you need administrative privileges to move the files. Make sure you are logged on as as an administrator by selecting the account tab in system preferences and making sure it says "admin" under your user name. Log on to or create an administration account then try moving the file.
Hope this helps, let me know
Thom

How can i copy files from one external hard disk to another using macbook pro with retina display

How can i copy files from one external hard drive to another using macbook pro with retina display?

That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
Clinton

How can I copy file/folders from and to hard drives? How can I have two or more windows of explorer so that I can drag and drop from one hard drive to another?

Hi,
I am a new customer (purchased last week) of MacBookPro (latest) and its my first ever Apple laptop.
I am almost lost to find the operating tools.
1. How can I copy files from hard drive to computer and vis-a-versa?
2. Only can browse one but how can I have two or more browses at the same time like in MS windows?
3. No right click works on track pad?
4. Is there application/ program compatible to MS office? If so how much and how can I purchase?
5. Is there AutoCAD program that is compatible to MS Window AutoCAD? and if yes how much and how can I purchase?
I will very much appreciate if you could email me the with the solution/answers please.
Regards,
Khagendra Limbu

1) For some reason this happens once in a while with FAT32 enabled external harddrives. I have no idea why this happens but it most easily solved by reformatting the drive. First make sure you've copied everything from the external drive to your internal harddrive. You've done this earlier so I assume you know how to do this.
Now the reformatting part. Open Finder and go to Applications. Look for the folder called "Utilities". Click on it. In it you find a program called "Disk Utility". Click on it. Now look for the external drive. You probably see two entries for the disk. Click on the one that contains the name of the drive NOT the one that describes the disk (Like for example 320.07 GB Samsung S2 Portable Media).
Now you see four tabs in the righthand part of the window. They're called "First Aid", "Erase", "RAID" and "Restore". Click on "Erase". This opens the tab with (amongst others) a dropdownbox (Format) and a textbox (Name) . In the dropdownbox select "Mac OS Extended (Journaled). Take note! This selection disables usage of the drive with Windows PC's. If your goal is to share the drive with Windows PC's select the MS-DOS FAT option.
Enter a label for the drive in the textbox Name. Now click on the button "Erase". This will format the drive.
Now when it's done you can copy back all the items you've copied to your internal harddrive earlier.
2) Opening two windows like Explorer on Windows is opening two Finder windows on the Mac. Simply click on the background. In the menubar you items like 'Finder", "File", "Edit", "View", et cetera. Click on "File" and "New Finder Window". Do this two times. Alternatively you can click on the background and press CMD-N two times.
3) You can right click on the trackpad. This however depends on if you've enabled the feature in System Preferences. In the topmenubar click on the Apple icon and select "System Preferences". Now look for Trackpad in Hardware. Click on it. You see three tabs with the names "Point & Click", "Scroll & Zoom" and "More Gestures". Select "Point & Click" and look for "Secondary Click'. Make sure it is checked and make sure it has written "Click or tap with two fingers" written beneath "Secondary Click". When you're done exit System Preferences. Now select the background and tap with two fingers on the trackpad. This should open the contextuel menu with options like "New Folder", "Get Info" et cetera.

When I connect to our server using smb:// can't copy files or edit names on server?

When I connect to our server using smb:// can't copy files or edit names on server?

Why not? What happens?
Do you get an error message? What does it say?

Can't copy files to network client's folders

Similar Messages

Maybe you are looking for