Can't copy large file to FW drive

I'm not sure who to ask, but when I try to copy a 7gb file to an external Lacie FW drive I keep getting Error Code 1309. I've copied the file to another drive successfully, but wonder why I can't and what the Error Code means.
Is there anything I can do besides reformat the drive? If not, and I must reformat shouldn't it be as HFS+?

I assume your external drive is formatted FAT32, so it can be read by both a Mac & PC. However, FAT32 has a limitation of 4GB files due to the fact that 4GB is the largest 32-bit number, and the length of the file in the directory entry is 32-bits.
 Cheers, Tom

Similar Messages

  • Can't Copy Large Files To External Drive

    This is driving me nuts. I'm running 10.4.11 with an external Newer Tech Ministack 320GB hard drive that's only ten weeks old. Yesterday I downloaded some large (50mb or so) QuickTime files to my desktop, which is to say my internal drive. I then tried to copy them to my external drive, since that's where I keep my movie files since they take up so much room. One copied over without any trouble, but numerous attempts to copy the others result in the process freezing after anywhere from 1/4 to 3/4 of the data has been copied, or else I get the "error 36" message. My first thought was that the external drive was failing, but I can copy small movie files (10mb or so) back and forth between the two drives with no problem. What's the point of having a large external drive if you can't use it for your large files? Repaired permissions on both drives, no improvement.

    I have repaired permissions and run disk repair on the internal drive as well. Yes, I've played the clips in their entirety, but I'm going to do it again and look for any hiccups. That's an interesting theory and I want to check it out.
    It has occurred to me that a workaround, although it by no means addresses the underlying problem, is to use QuickTime Pro to chop the clips up into several smaller files, copy them to the external drive, and then reassemble them via QuickTime Pro on the external drive.
    FWIW, I neglected to mention (although I don't know if it's pertinent or not) that immediately after installing the external drive ten weeks ago I used SuperDuper to clone my entire internal drive onto the external firewire drive. I then erased the movies from the internal drive, which was bumping up against maximum capacity. I am able to boot from the external drive, and I want to retain this capacity should the internal drive (which is, after all, six and a half years old) fail.

  • Can't copy large files to airport extreme USB drive.

    Hi Everyone,
    I'm positng because I'm unable to copy large files to an AirPort Disk using Moutain Lion.  I have the following setup.
    AirPort Extreme:
    - Firmware version: 7.6.3
    - Airport disks secured by password
    External Drive:
    - Seagate 3TB External Drive connected to Airport Extreme thru USB
    - Mac OS Extended (Journaled) Formated
    Computers:
    - MacMini(Mid 2010) - MacBookPro 13" Retina
    - Both have Mountain Lion with latest updates
    Airport Utility:
    - Version  6.2
    I am using the drive for a backup of .mv4 files. Files up to 4g transfer just fine. Files over 4g will get all the way to the end and throw a -36 error. If I plug it into my mac the files copy just fine. I have googled the issue and get all of these fat32 and win7 issues. Not really relevant from what I can tell.
    I have also connected other drives the the Airport formatted the same and get the same problem.

    That's not entirely unusual as using that port on the AEBS for backup is an iffy business, especially if you are trying to use Time Machine which is completely unsupported by Apple.
    There may well be something wrong with the file you are trying to transfer, hence, the -36 error. I have no solution for you. Generally, there is no suitable solution. If you get the error while trying to copy several files at once, then try doing one file at a time which sometimes works. Archiving may enable you to transfer the archive, but then dearchiving on the destination may not work.
    You can check the filename length and look for illegal characters or just rename the file, if possible. And, don't overlook the possibility that the file itself is corrupted even if it does not appear to be so from outward appearances. Lastly or firstly, try transferring the file to the external drive hooked up directly to the computer instead of the AEBS.

  • Can't copy large files to AirPort Disk Using Windows 7

    Hi Everyone,
    I'm positng because I'm unable to copy large files to an AirPort Disk using Windows 7.  I have the following setup.
    AirPort Extreme:
    - Firmware version: 7.6.1
    - Airport disks secured by password
    - No guest access allowed
    - Airport Disk Preferences:
      - Automatically discover airport disks is enabled
      - Show Airport Disks in the system tray is enabled
    External Drive:
    - Western Digital 500 GB MyBook External Drive connected to Airport Extreme thru USB
    - FAT32 Formated
    Computers:
    - 2 Toshiba Proteges, Both with 4GB RAM
    - Both have Windows 7 Home Premium with Service Pack 1, 64-bit version
    - (Sorry we have no MacBooks at home, just iPhones and iPods!)
    Airport Utility:
    - Version  5.6.1
    Airport Disk Preferences Utility:
    - Version  1.5.5.3
    A week ago, I was able to copy over large files (videos <4GB in size) to the drive.  Now, when I try to copy over these large files to the drive, the copy dialog box hangs.  I receive a message stating that Windows is calculating the size, but then it doesn't copy over.  Windows then gives me a message that it is unable to copy to the drive.  When I test the drive connection by copying a small text file over, it copies over quickly and seamlessly.  This problem occurs on both computers.
    I am able to do the following with the drive connection:
    - Read files
    - Change file names
    - Copy files from the drive to my computer
    - See the contents of drive
    I've tried all the combinations of the following with no success:
    - Turning off Windows Search
    - Downgrading the firmware
    - Reconfiguring wireless adapter
    - Rebooting computer
    - Rebooting wireless router
    - Rebooting external drive
    The drive seems to be working fine except for when I want to copy <2GB files over to the drive.  Does anyone have a solution that seems to work?
    Thanks!

    I'm happy to report that, after reformatting the drive to HFS+ (aka Mac OS Extended), there are no problems writing/copying large or small files to the AirDisk drive.  I'm also happy to report that I am copying to the drive at a rate of roughly 4MB/s.
    As I mentioned earlier, the only catch is that I am unable to plug the external drive directly into a Windows computer via the USB port as Windows is unable to read HFS+ formatted drives.  (I can, however, plug the drive into a Mac computer as they can read HFS+ formatted drives.  The only problem is that I don't own any Macs at this time!  LOL!)
    You're probably wondering how I formatted the external drive to HFS+ since I don't own any Macs.  (Windows only allows you to format drives in exFAT, FAT, NTFS and the like.)  That is a good question.  Basically, I downloaded an open source formatting tool called, Gparted, which allows you to format any USB drive to any major file format system.  Since Gparted is an open source tool, it is a little cumbersome to use. Once you figure out how to use it, it is a cinch to format the drive to HFS+.  (Of course, an easier method would be to borrow a friend's mac, plug the drive into their mac, and format it to HFS+ using their mac.)
    For a step-by-step guide on how to solve this problem, see the steps below:
    1) Backup all data from external drive
        a) Fortunately, I have a 1TB ultraportable USB drive which has enough space to backup all data on the drive
    2) Format the external drive to HFS+ using one of the methods below
        a) Plug it into a Mac and format it
         b) Use Gparted (free) to format it
    3) Plug the drive back into the Airport Extreme
    4) Start copying files over to your networked drive!
    I hope this helps you! Cheers!

  • How can I copy outlook files to hard drive

    How can I copy large outlook files to the external hard drive with out formatting it?
    I currently have Macbook Pro Version OS X 10.9.5.
    I tried all the ways copying outlook files, but it says larger files cannot be transferred. My outlook file is about 16gb.
    Also tried trough Time Machine...Can anyone list of the steps here to copy these files to my hard drive?
    Later, I want to copy these files from hard drive to the new Macbook Pro.....need urgent help please !!!

    If your external drive is FAT32 (MS-DOS) format, it won't take file larger than 4GB. There's no way around that, I'm afraid.
    Matt

  • Can't copy large files to NAS

    I have a Cirago USB NAS adapter that I have one 120 GB external drive connected to.
    The external drive is FAT32 formatted.
    I can connect to the drive just fine and can copy small files to it without a problem.
    When I try to copy larger files to it (~700 MB or greater) it gives me an error saying there isn't enough space on the drive.
    The drive has over 40 GB of space available though.
    Not sure what the heck is going on...

    I ended up having to connect to the NAS differently.
    The nas automatically showed up in the Finder when I started it up for the first time.
    It just showed up as "nas"
    Well, I needed to go to the Go menu in finder then click "Connect to server"
    I then had to enter a specific address
    http://nas.local:9880
    It then asked for login credentials.
    The only difference is it connected via WebDAV this time around.

  • Can you share large files on iCloud drive like dropbox?

    I am exploring how to use iCloud drive now...and had a basic question.  Can you share large files from it in a similar way as you can with dropbox?  This is a great feature of dropbox...or google drive when mailing large files just doesn't work. 
    I have a Yosemite beta currently, and it doesn't look like you can do this. 
    I also was wondering if anyone has figured out how to make an alias of the iCloud drive on the desktop rather than always opening a finder window in order to drop files into iCloud drive....
    Yosemite Beta and Mavericks, iMac 2012/Mac Pro/Mac book air

    I am exploring how to use iCloud drive now...and had a basic question.  Can you share large files from it in a similar way as you can with dropbox?
    Have a look at the iCloud Drive FAQ:  The file size limit is 15 G:   iCloud Drive FAQ     http://support.apple.com/kb/HT201104
    You can store any type of file in iCloud Drive, as long as it's less than 15 GB in size. There's no restriction on file type, so you keep all of your work documents, school projects, presentations, and more up to date across all of your devices. Learn more about managing your iCloud Drive files.
    If you make an alias to a folder on iCloud Drive, you can drag it to the Favourites in the Finder sidebar. That is the best I could do.

  • Can't copy large files to an USB Disk pugged in an USB hub

    When I tried to copy large files to my USB disk pugged in an USB hub, it stopped at 220 Kb... When I plug the disk to the internal back USB port it works fine ¿Any idea?
    Thanks

    Hi, cguzman -
    Related to what Templeton suggested, if your USB hub does not have external power (self-power), try replacing it with one that does.
    If your hub is self-powered, many of those have a small selector switch on the side or rear which allow the choice of self- or bus-power. If yours has such a switch, make sure it is not set to 'bus'.

  • Can't copy large files to E4200 Media Server

    I've rolled back my E4200 router to the old firmware 1.0.0.1, then set up a media server.
    It generally works (e.g. it streams pre-existing media files to other devices). I can copy to this external drive small (say, < 1 MB) files. 
    The drive has enough free space. 
    However, I cannot copy to this external drive large (e.g. 700 MB) files.

    Just chatted with a Cisco rep who offered a solution (which did not work):
    On the "Setup -> Basic Setup" tab,
    under "Internet Setup -> Optional Settings(required by some Internet Service Providers)" in the left column,
    change "MTU" from "Auto" to "Manual", and then
    change "Size" from 1500 to 1365.
    Click "Save Settings" on the bottom.
    (Mod Note: Agents Tech ID removed.)
    (Original poster's note: not a solution.)

  • Can't copy large files to any Samba share

    Just updated to Mavericks but i'm having big problems moving bigger files (so far i've tried a couple of 4GB files) to a SMB share. Just the other day i could copy these files over just fine under Mountain Lion but Mavericks throws this error:
    "The item blablabla.bla can't be copied because it's too large for the volume's format"
    So far i've tried with a couple of files smaller than 4GB (up to 2.5gb so far) work just fine. No write errors either. The files can be copied without problems when i boot from my older harddrive with Mountain Lion still on it so i'm going to go out on a limb and say it's not a file or server error but a Mavericks error. Anyone know why or what to edit for this to work normally again?

    I have temporarily resolved this problem by reconnecting to the server and shares differently.
    Disconnect from the server
    In Finder, select "Go" and then "Connect to server..."
    For server address enter: CIFS://ServerNameOrIPAdress/
    Select the shares you need
    You will now be able to move bigger files to SMB shares again. For ease of use, drag a share or a folder within a share to your Sidebar.
    As it appears Apple has implemented a newer version of the SMB protocol, SMB2, that is still somewhat buggy and will throw errors like these.
    I hope this helps someone else as well.

  • Can't copy large files from DVD

    Hi all,
    I'm trying to copy a 4.3 GB .tar file from a DVD onto my harddrive, but it will only copy about 1 GB before I get the error
    Cannot read: Input/output error
    I can copy smaller files just fine from the same DVD and other DVDs, but nothing too large.
    Does anyone have any suggestions?
    Thank you.

    Brasero checks immediately after the burn. I presume your DVD is a bit older than one day . If not, you just burnt yourself a coaster.
    I know there are some Windows programs to check the integrity of an optical disc, but I don't remember their names (nor do I know something like that for Linux).
    I would do a few copy trials, with dd. If you always see it break on the same size and you have plenty of space left, then I think there really is a problem with the data integrity on your DVD. I have done copies with dd from optical media before, and I think you can be pretty sure the data is corrupt if dd can't pull it off.

  • Can't copy large file

    My n900 free space is 11G, I tried to copy a 9.5 file to it., but it says "no sufficient space to copy file...". What's the reason for this?

    How are you trying to copy a file to the device? Mass storage mode? or are you using the device itself to pull the file from somewhere?

  • Can't copy large files to external hard drive

    I have a 500gb western digital my book home edition with firewire/usb/esata connections. I want to copy some large video files (1gb and higher) to this external drive but I keep getting this message: "sorry, theoperation could not be completed because an unexpected error occured (error code-1309)."
    what is the dealio?

    You have to erase the full drive (not the partition) which is why it is better to click on drive icon, then PARTITION tab, and set to new partition(s).
    Click on OPTIONS.... below and set it to something other than Master Boot Record.
    Click APPLY and then go back and apply the new partition scheme. You can also click SECURITY OPTIONS to zero or do 7-way write erase, but I don't think you actually need to.
    Using Disk Utility to format drives should be in "Disk Utility 101". Even the Help menu in Disk Utility has what you need to format, initialize and use all the features. Use the instructions for how to setup a drive for TimeMachine would be excellent also.
    http://www.apple.com/support/leopard/timemachine/

  • Can't copy large files to a network drive :(

    hi,
    I am using a powermac G5 (Dual 2 GHz, OS 10.4.7). I am connected to a network which has windows based server i believe. If I try to copy files that are sized over 2 GB to the storage drive, it gives me an error message saying "Sorry, the operation could not be completed because an unexpected error occurred (error code -1309)"
    But we have two other Mac's (an imac and a mac pro both using OS 10.4.7). I can copy 4-5 GB files without any trouble.
    I need some help... is this problem fixable?? if the other macs are able to copy... what am i doing wrong?
    please help... thank you in advance.

    Error 1309 is a file bounds error. No real news there... just wanted to clarify.
    also, HFS errors seem to run... -1300 to -1305.
    Are the working & not working ones connected by the same protocol, (smb, NFS, or...)?
    There's also an MS error -1309 with Office 2003, Excell, Word, etc., but may or may not have anything to do with this...
    http://support.microsoft.com/kb/830422

  • Error message -36 when copying large  files from Firewire drive

    I have kept several large audio files as backup on an external LaCie Firewire drive. When trying to copying them back, almost all of them starts to copy, then stops and (after a minute or so) report error message -36.
    I have run both Apple's Disktools and the latest Diskwarrior, but no errors are reported. I gues the audio files must have become corrupted... What do you suggest that I do? The contain valuable audio information that I really don't want to get lost.
    Helge K.

    Not helping but others are having the same problem...
    http://discussions.apple.com/thread.jspa?messageID=2564624

Maybe you are looking for

  • The screen of my iMac is black and doesnt work....Why and what to do?? helllpppp

    oKAY So I use my iMac everyday... and need this fix asap like everybody else that experience this problem I guess... One morning I just start my computer like usual and nothing happen to it during the night and I had use it without any trouble the da

  • Problem in AGR_1251 download

    Hi All, I am using AGR_1251 to list all auth. objects and their field values in a role. When I download it to an excel file,I find that a few rows are merged in one column. This makes the purpose of listing fail Has anyone else faced the same issue.P

  • CF Standard and 64-bit OS

    Hi I posted this in the CFML - General Discussion area but I'm not sure if it was the right place to put it, so I've posted it here too. We have a memory intensive application which runs on CF Standard. We are considering moving to 64-bit but CF 8 St

  • ODI, restoring version in Test Repository - Missing Reference

    Hi all, In my Development repository I removed a column from a table, to do that I was forced to remove any mapping to that column in my interfaces. After that I created a new version of my Models and Project folder. I restore the newest version (Mod

  • Nimax.exe Entry point not found

    the following file has an error mesage box that pops up when I start my laptop or when I install my DAQcard? Whats causing it and how do I fix it? Attachments: error.gif ‏10 KB