Can't copy .mov files to another drive, get msg

Hi
I've been trying to copy some .mov files (ext. isn't showing, btw) to another drive. When I do I get this msg, 'The operation can't be completed because the item "blah blah" is in use.
I also have gotten this msg when copying the folder: 'The operation can't be completed because the item ".DS_Store" is in use.
Then I tried creating a new folder to put them in, and I get this msg, "The operation can't be completed. An unexpected error occurred (error code -50).
QT isn't open. The only apps open are Firefox and Word.
I tried adding both drives to Spotlight's Privacy in System Prefs. No help.
Any ideas?
best,
elmer

Thanks for the reply!
What is the 'DS_Store' file?
Am I right thinking Tinker Tool allows you to choose from that list of details on this page <http://www.bresink.com/osx/0TinkerTool/details.html>, and doesn't simply enable them all?
Thanks again, maybe someone else can chime in about why I got the other messages, tho maybe the ds_store was the reason for all.

Similar Messages

Can't copy large file to FW drive

I'm not sure who to ask, but when I try to copy a 7gb file to an external Lacie FW drive I keep getting Error Code 1309. I've copied the file to another drive successfully, but wonder why I can't and what the Error Code means.
Is there anything I can do besides reformat the drive? If not, and I must reformat shouldn't it be as HFS+?

I assume your external drive is formatted FAT32, so it can be read by both a Mac & PC. However, FAT32 has a limitation of 4GB files due to the fact that 4GB is the largest 32-bit number, and the length of the file in the directory entry is 32-bits.
 Cheers, Tom

Can't copy/ move files

IMAC intel with Lion. My adobe photo downloader will not download pictures. Finder gives the pinwheel of death for even moving a single file to another file location on the HD. I can't print anymore. Safari does not work properly. I can't move file to USB drive.
I have rebooted several times with no change when I do these activities.
Is this an internal memory problem?
If it is - is there any way I can clean it up?
I don't know of any recent changes that may have triggered this.
Thanks in advance.

Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If problems persist...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?

How can I copy outlook files to hard drive

How can I copy large outlook files to the external hard drive with out formatting it?
I currently have Macbook Pro Version OS X 10.9.5.
I tried all the ways copying outlook files, but it says larger files cannot be transferred. My outlook file is about 16gb.
Also tried trough Time Machine...Can anyone list of the steps here to copy these files to my hard drive?
Later, I want to copy these files from hard drive to the new Macbook Pro.....need urgent help please !!!

If your external drive is FAT32 (MS-DOS) format, it won't take file larger than 4GB. There's no way around that, I'm afraid.
Matt

Can't Copy Large Files To External Drive

This is driving me nuts. I'm running 10.4.11 with an external Newer Tech Ministack 320GB hard drive that's only ten weeks old. Yesterday I downloaded some large (50mb or so) QuickTime files to my desktop, which is to say my internal drive. I then tried to copy them to my external drive, since that's where I keep my movie files since they take up so much room. One copied over without any trouble, but numerous attempts to copy the others result in the process freezing after anywhere from 1/4 to 3/4 of the data has been copied, or else I get the "error 36" message. My first thought was that the external drive was failing, but I can copy small movie files (10mb or so) back and forth between the two drives with no problem. What's the point of having a large external drive if you can't use it for your large files? Repaired permissions on both drives, no improvement.

I have repaired permissions and run disk repair on the internal drive as well. Yes, I've played the clips in their entirety, but I'm going to do it again and look for any hiccups. That's an interesting theory and I want to check it out.
It has occurred to me that a workaround, although it by no means addresses the underlying problem, is to use QuickTime Pro to chop the clips up into several smaller files, copy them to the external drive, and then reassemble them via QuickTime Pro on the external drive.
FWIW, I neglected to mention (although I don't know if it's pertinent or not) that immediately after installing the external drive ten weeks ago I used SuperDuper to clone my entire internal drive onto the external firewire drive. I then erased the movies from the internal drive, which was bumping up against maximum capacity. I am able to boot from the external drive, and I want to retain this capacity should the internal drive (which is, after all, six and a half years old) fail.

How can I save .mov file as another .mov file after trim from Pre9?

I would have thought this would be simple. Just like I can crop a still image in Photoshop and save it with a new name (or the same name), I expected to be able to trim or split an .mov file in Premiere Elements 9 and save the resulting file(s) under a new name (or the same name) while preserving the same format.
But SIX hours later, NO.
Instead, after I split or trim the .mov file, it seems to be held hostage inside a project that won't let it go. I even tried "exporting" it but the choices are different than the properties of the source file (a BAD thing), and the resulting two files from the export are unreadable on my computer (USELESS).
The .mov file was shot with a Canon EOS Rebel T3i. Windows with Vista. Adobe Premiere Elements 9. I also have Photoshop CS5 Extended and Lightroom 3.4.x, if either of those would help.
I'm sure that I'm mistaken, There MUST be a secret menu option to SAVE-the-trimmed-CLIP-as-a-SOURCE-file.
How could there not be something this basic?

~ ~ ~ ~ ~ *** ~ ~ ~ ~ ~
Quoting Steve:
"I'll say it once more: It's impossible to cut a piece of video and then resave your file.....[because] IT'S [against] THE NATURE OF EDITING VIDEO WITH EVERY VIDEO EDITING SOFTWARE IN THE WORLD."
~ ~ ~ ~ ~ *** ~ ~ ~ ~ ~
I'm very pleased to say that I've found out how to do exactly what I wanted to do, despite Steve's strongly stated opinion that it is "impossible."
I can:
..... trim or split a video
..... and save it under the same name or a different name(s)
..... WITHOUT converting it to something else before or after trimming
..... WITHOUT changing it from its original format
..... WITHOUT exporting (compressing) it
..... WITHOUT "rendering" it different in any way except my desired length change (and resulting smaller file size)
This is desireable to me in order to:
..... save many gigs of space on my terabyte drives
..... while retaining source file footage that may be useful in future projects
..... IN ITS ORIGINAL (source) FORMAT !!!!!
YAY!!!
I got thinking about the software that came with my camera. I didn't install it because it included things like a program to handle RAW images (and I prefer to use Adobe Lightroom 3) and a program that I thought might be similar to Bridge (and I really like Adobe Bridge).
But I decided to install it and see if there was anything there that would allow me to work with the videos and sure enough, there it was - the ability to trim my videos of the junk while keeping the rest in original perfect format, just as it was shot. From a user's point of view, it is a precise video version of cropping a still image in Photoshop. EXACTLY what I wanted to do!!!
Here is a collage of the properties box of the "before" version (the original original), collaged together with the properties box of the "after" version (the trimmed original). The properties boxes are the properties as reported by Adobe Premiere Elements 9.
In the above-shown collage of the screenshots that I've made for you, you can see that nothing has changed in terms of the properties. The only changes are the length (because I cut it), the file size (because it is MUCH smaller now), and the name (because I wanted to preserve the original file in order to make a screenshot of its properties for you). I WANT TO REPEAT - the new CUT file is identical to the original, except the unwanted portion has been cropped away. It was NOT compressed, it was NOT rendered, it was NOT exported. It is a true source file utilizing original footage in its original format.
(This forum limits images to 450 pix wide so to see that all the relevant format properties are the same in both properties boxes, you may have to increase the size through your browser by holding down the [Ctrl] and hitting the "=" key (the one with the "+" above the "=" sign).)
~ ~ ~ ~ ~ *** ~ ~ ~ ~ ~
Here are the steps I took to make the screenshot above:
1 - Opened the original file in Canon ZoomBrowser EX 6.7 (which came with the camera).
2 - Trimmed ("cut") the file by placing a start point and stop point around the desirable footage.
3 - Saved under a different file name. (NOTE: This was a true save, NOT an export, NOT a "render" of some sort.)
4 - Switched to Adobe Premiere Elements 9 and started a new "project."
5 - Used "Get Media" to pull the original version and the cut version of the video into the project. NOTE: I pulled the cut version in first, so if there had been a format mismatch (as compared with the DSLR-1080p30 @29.97 setting I normally use when creating a new project), Premiere would have said so. But there was NOT a format mismatch. And it runs perfectly, just as it did before, including audio.
6 - Right clicked each video and took a screenshot of the properties of each to show you.
And this means I can use the trimmed footage for any purpose down the road, yet I didn't have to save the entire file which included unwanted footage. And I've saved a considerable amount of space on one of my terabyte drives.
SUMMARY:
Easy as pie:
I trimmed the excess off a video WITHOUT "converting," "exporting," "compressing," "rendering" or changing the format away from the original in any way.
No loss of any type of data whether audio or visual or "other." (Except, of course, the unwanted footage.)

I don't have Itunes on my Linux box, How can I Copy Movie Files using SSH?

Can anyone point me to the directory where Movie files are stored..Since I don't have itunes on my machine, I can even search for movie files to see where these movie files may be..
Any help would be appreciated..

All purchases are considered final, but you can try contacting iTunes support and see if they will give you a refund or credit : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

IPhoto: can't copy my library to another drive

I'm trying to back up (and ultimately move) my 94GB iPhoto library to an external harddrive and just before it finishes copying I get a message that says, "The Finder can't complete the operation because some date in "iPhoto Library" can't be read or written. (Error code - 36). Is there a way for me to find what data might be corrupt so I can move my Library? My Library is currently on an external drive Passport drive.

Sorry, I don't think I was clear; the source drive is Windows FAT32 and has the iPhoto library, the destination drive is a Lacie formatted with Mac OS Extended and is empty.
I haven't been successful after four attempts to copy by dragging library to destination drive.

HT3523 I can play an .mov file but cannot open it to move it to another drive/disc/etc. When we try to open it, we get a message that says "The movie file for "beanmine.mov" cannot be found. Without this file, the movie cannot play properly."

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
Help!

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Sounds like you created a "Reference" file here. I.e., a "Reference" file is a file that tells the player how to play the data contained in a "Resource" file. When you try to open the "Reference" file in the QT Player app, the first thing the player does is check to see if the "Resource" data file is is still available where it is supposed to be. (I.e., moving/deleting the resource file or moving reference file without moving the resource file to maintain the relative path between the two will generate the error message you mentioned.)
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
That depends. Deleting a file does not actually erase the data immediately. Instead, the operating system just tells the system directory that the space containing the movie data is available for reuse if/when needed. As time passes, the chance that some of the data sectors will be re-written by other data continuously increases. To restore the file normally requires use of a special utility that both locates and restores all of the linked sectors containing the "deleted" movie data in their correct order. Other methods of restoring files would depend on the software you routinely have active on your system. For instance, do you use "TimeMachine?" or orther software that automatically backs up your data periodically? If so, then follow the instructions for your particular application to recover a deleted file.

IMac is not booting - How can I copy my files to an external drive

Hello,
my iMac (late 2009 model, OS X 10.7.4) is not booting anymore. The iMac stopps booting at the Apple logo and the spinning gear.
I tried a couple of things that I found here in the community but nothing worked.
start in safe mode => iMac shuts off after a couple of seconds
start with safe boot (Shift-Command-V) => I'll get a couple of error messages, e.g. disk0s2: I/O error. SATA WARNING: Enable Drive PHY PM failed
reset the NVRAM/PRAM => no change
But when I try to get access on the HD with the FireWire Target Disk Mode, I can see the following folders: Applications, Library, System, Users. But the statusbar shows 0 items for each folder and it shows that the HD has 650 GB available. I have the original 1TB HD. When I try to start OS X from an external drive I can see the same folders. I tried Data Rescue 3 to scan my files, but the software stopps with an error.
My TimeMachine backup was not working, so I have no actual backup and need to find a solution to copy my files to an external drive.
Instead of Data Rescue 3, I can use TechTools Pro 6 alternatively.
Would Data Rescue 3 find files if I erase and create a new partition on the HD?
What I found out so far, it looks like a corrupted file system.
Have anyone an idea or a tip, how I can copy my files?
I would be more than happy if someone can help me.
Thank you very much for all answers in advance.

The internal drive is failing, or has failed. You may not be able to save the data.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot into Recovery (command-R at startup) or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

Backed up avchd files to another drive, can I...

Hi
I've backed up my Panny GH2's avchd files to another drive, different from the drive used for editing where they also are.
To use those files, FCPX imports them wrapped in a QT 'sheath' and produces files about the same size, right. I take it that is not an alias of some kind and it doesn't need the original file any more.
So can I now remove those original avchd files to give me more room on the drive since they are backed up elsewhere and FCPX has a file good for editing of a similar size?
Hopefully this is not too confusing.
best,
elmer

I don't quite get what you mean. When importing in FCPX, you click on the folder and it shows the clips, there's never a choice about importing folder structure that I can see.
And the pop-up window for importing shows 'copy' checked and grayed out so I don't have a choice. I believe that's about how it was in earlier versions of FCPX. I also tested with a small vid file, just moved it actually to another place in the drive which should have broken the connection. No problem with the file in fcpx.
Thanks again!
When You have avchd foorage from a camera, it has a specific folder structure. Some people copy the files from a camera card using the finder and do no copy the e tire folder structure. You ard right that this structure is not apparent shen importing inFCP X.
It is clear that you have it as FCP X makes copy the media over. Thiz is correct behavior when importing from a camera, camera card or camera archive. That's fine.

I re-installed XP and kept the old program files on another drive, how can I transfer my bookmarks list to the new Firefox ?

I re-installed XP and kept the old program files on another drive, how can I transfer my bookmarks list to the new Firefox ?
I tried shifting the Profile folder contents from the old to the new, that seemed to work but I kept getting a message that my security was affected and that the problem could be in that folder so I shifted it back.

Hello Kencrews,
When you connect the iPod to the computer and iTunes is authorized for your Apple ID, then you will get a prompt to transfer the purchases from the device to the computer. Keep in mind this will only transfer purchased items from the iTunes Store.
Here is a helpful article to assist getting that done.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
Regards,
Sterling

The operation can't be completed because an unexped error occurred (error code-50). This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive. Then this morning I can't open my project file. What to do?

Message: The operation can't be completed because an unexped error occurred (error code-50).
This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive.
Then this morning I can't open my project file. I get this message: The project appears to be damaged, it cannot be opened.
What should I do!??
I have moved my project onto 2 different external hard-drives now.

Hi There,
After looking around for this error, it seems to be related to OS, we would recommend you to contact Apple support for this.
Thanks,
Atul Saini

What is error code 0? Trying to copy a pro res.mov file to thumb drive connected to Mac Book Pro (2010 vintage).

What is error code 0? Trying to copy a pro res.mov file to thumb drive connected to Mac Book Pro (2010 vintage).

Problem solved! Thanks roam.

Can't copy media files on to Stor.e tv+ using LAN

If I try to copy movie files from my PC to my Stor.e TV+ using the network it fails. Any ideas?
I can see the Video folder and open it.
I've dropped a simple audio file onto it and that copies, but as soon as I try to do a movie file, it sits there attempting and then fails.
I get a msg saying to try again or to cancel.
I click cancel and it takes about 2 - 5 minutes for windows to respond and stop.
I'm running Win 7 Pro.
I have 8gb RAM and using a hardwired network.
What am I missing?

Another one here!
I can transfer media files (or any file) across my home network to the hard disk as long as its less than 1.5GB.
Things I tried without success ...
* Network transfer from a Vista PC (with or without Firewall on) (with network device set to half duplex)
* Network transfer from an XP SP3 PC (same as above)
* Transfer from a USB Flash Drive direct to the Stor.E TV+ local USB port!!
* Network transfer from a Vista PC of a multi-part RAR compressed files (all 17 parts of 100MB transferred ok but failed when tried to extract it) ( a smaller 2 part rar file did extract ok as a check)
My conclusion is that there appears to be a filesize limit set in software (Samba?) to nobble large files.
I'm sure Toshiba could provide a Samba update to overcome this designed-in limit.
It will be interesting to see if anyone from Toshiba will respond to this. They wouldn't release a Multimedia Device that couldn't handle all media files would they??

Can't copy .mov files to another drive, get msg

Similar Messages

Maybe you are looking for