Can't create %100 width object

I'm new to Muse and am having problems creating a %100 width object.
I have a rectangle containing a fill image that is set to tile horizontally which is part of a group. When I snap the edge of the rectangle it's a blue line instead of a red one and does not indicate that it's a %100 width object.
What could I be doing wrong? Or is this a glitch of some kind? Thanks so much!

Hi
With group objects we cannot do that as 100% width, please ungroup the rectangle and then it would be 100%.
Thanks,
Sanjit

Similar Messages

Captivate 8 responsive designs: only one 100% width object per slide?

I've been customizing some responsive themes to use two or more 100% width objects. As I work with the project, I find that some of these objects fall short of the right edge at some break points or, more commonly, at intermediate browser widths between breakpoints. One object (a PNG used as a branded header) started slipping off to the right, leaving a big gap at the left, after I worked with the file for several hours.
I've been putting this behaviour down to file corruption, but I'm now seeing the right-side gapping even with a fresh new file built on the White theme that has only one slide with three lines of text.
Looking closer at the themes, I can see that none of them have more than a single 100% width object. Is this simply a coincidence, or does this reflect a real limitation in HTML 5 output from Captivate?
Should I adapt my themes to use other objects at sub-100% widths, where a little gap on one side or the other won't make much of a difference? In short, should I simply avoid putting more than one object per slide flush with any of the edges?

Replying to my own question ...
Has no one else seen this? Is this a known bug?

%100 width object not working

http://www.shutterlabcreative.com/index.html#services
I'm having issues with the %100 width object (texture at the top of this page) disappearing once it's converted from a normal image to a %100 width object. Does anyone know why this may be happening?

Hmm... the object doesn't appear to be exporting as 100% width. Could you please send us the .muse file at [email protected] along with a link to this thread so we can take a closer look? If the file is larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. Thanks.

How can i create a custom object 0REQUID

Hello all,
I have a question. How can i create a custom object 0REQUID? Is it possible to create it without actvating BI content?
Thanks in advance..

Hi,
If you want to create a new info object which is a copy of 0REQUID. then
Go to > info object key figure / Chara catalogue> create new key figure / Chara --> enter 0REQUID in front of TEMPLATE and you will get all details of 0REQUID in your new key figure / chara.
Hope this helps.
Assgn pts if helpful.
Regards
Edited by: chintamani deshmukh on Apr 14, 2008 11:09 AM

Can i Create A business object of my own without inheriting

hi gurus,
Can i Create A business object of my own without inheriting from any other business object. i Know how to create sub type.

yes, u can choose 'create' button in SWO1 and not fill field Supertype.
or copy your new BO from already exist.

How can we create a ABAP object into .ptr file

HI,
How can we create a ABAP object into .ptr/.car/.sar format so that we can give it to a remote client and which can be imported into their R/3 system to get the functionality of this object.

Hello Ramesh
All you need is SAPLINK. Have a look at the following links:
<a href="/people/ed.herrmann/blog/2005/11/14/the-enterprise-and-the-bazaar Enterprise and the Bazaar</a>
<a href="https://sourceforge.net/projects/saplink/">SAPLINK</a>
Regards
Uwe

Can I create a File object without writing it to the disk?

I need construct a mechanism where I can "write" instructions to a file and then FTP this file to a remote system. It is basically a Telnet-like integration for a system that does not support Telnet. Once the file is on the remote device, it knows how to read the file and process its instructions.
I would like to logically create this File object, by that I mean that I would like to use a FileWriter object to write the text instructions to the File, then use the Jakarta Commons NET API to FTP the file to the remote system. My question: can I create this File object without the file actually being written to the file system? Can the File just be memory resident for this creation and FTP?
There could be tens of thousands of these transactions per day and I would like to just avoid any kind of deletion strategy, if I can. Thanks.

Apart from the questionable decision to try and mess with the File object, I think the answer to (my guess at) your original question is "Yes".
Jakarta Commons/Net FTP can upload to a server from any input stream you like. It doesn't have to be a FileInputStream. In particular it could be a ByteArrayInputStream, which reads from a byte array in memory.

Can I create a DIMENSION object mappign without a Dimension table?

I understand how I can create a dimension object and it's associated table. However, can I map my enterprise data directly to the dimension object itself and skip the loading of the dimension table? The enterprise data for most of my reporting warehouse for the greater part is fairly simple and requires only joins to some reference data.

Matthew,
Like you stated, the dimension object in OWB will generate scripts for two object types. The first is a dimension object and the second is a table. In the dimension object the hierarchical structure(s) (meta data) is stored and the table stores the data. So you always have to load your enterprise data into the table.
Hope this helps.
With kind regards,
Bas Roelands

Can I create a Class object without the VM?

Using byte-code engineering, is it possible to create a class object?
What about if I serialize a Class object to a file, can I byte-code engineer that and then reinstantiate it?

Thanks I'll check it out. Basically I want to try it
for fixing a problem of running two apps in the same
VM.There's a world of problems when you try to run two programs within the same JVM. I wouldn't suggest even trying it unless it's a last resort. Why do you want to do that?

How can I set 100% width my slideshow on mobile version

Hello!
It's been a while I needed to ask this question here but a huge problem of authentication from ADOBE forum took months to be solved by them.
Anyway, I have a website made with muse (desktop). I tried to decline it in tablet and photo version as it said ti be easy from abode muse team video.
But the sideshow photo don't behave in the mobile version as expected.
http://demis.nu/phone/modeles.html
the worse is the landscape orientation. The photos are just to big for the screen.
I tried 100% width, and cancelled it, I tried to resize the size of the photo to fit the both sides of the page...anyway, anything I tried wasn't satisfying.
I know the solution is to make it responsive but I couldn't be able to find the way to do it in Muse.
I tried the demo of muse in the early hours (2011) and years after it's obvious the adobe muse team have understood responsive design rules everything and I'm sure they implemented it but can't find it.
Can someone give me a help please because the phone version is online and is horrible.
thank you so much.

No one could help me please?

Maximum Numbers of profiles that can be created in Business Objects CMC??

Hi,
I want to know if there exists any limitation in the number of profiles that could be created in Business Objects Enterprise CMC. My question is because I need to restrict the reports that users can see in the InfoView and a way to do this is creating a profile for each customer for example. I want to create 5000 profiles approximately
Thanks a lot

Hi,
i never heared of a limitation there. Even in your size.
If you need an official Answer i would recommend creating an OSS Message at SAP.
Regards
-Seb.

Can't create new root object?

i have created new suffix,and i want to add them into directory.so i click create "new root object" in menu "directory" .
but i return , u have no the admin right to do this!
but i used the user "admin" to login,it have the right to admin the directory server!
why？
tks a lot...

This can only be done by
cn=Directory Manager
User admin is allowed to change anything inside a tree, but not to start a new tree (root suffix)
Regards,
Niels

How can we create an entity object using multiple tables?

Hi All,
I'm a newbie to OAF.
I'm trying to create a simple page using OAF.
While creating Entity object, there is an option to add the database objects from which we can create our Entity Object.
There we can enter only one database object.
If suppose I need to create a Entity object by using mutiple data base objects, how can I add other database objects?
Is there any option for multiple selection of database objects there?
Thanks in Advance

User,
a). You should use the [url http://forums.oracle.com/forums/forum.jspa?forumID=210]OA Framework Forum for this question.
b). Entity objects always correspond to a single table. I think you want to create a View object instead.
c). Really, you want to be using the OA Framework forum.
John

How can I create a Document object from a text file (myFile.txt)

Hi everybody:
Thank you for reading this message.
I am trying to find a method to convert a text file ( I have it in a File object) to a Document object.
I read the Java API but it is strange, I do not know if I have to create an AbstractDocument, it is really strange for me.
Any comment is welcome,
Regards,
JB

Document is an interface, and AbstractDocument is abstract, so you
can't create either of those directly. Assuming you are dealing with a
a plain text file, you could do something like
// Not catching any exceptions that get thrown
File file = /* file you already have */
String eol = System.getProperty( "line.separator" );
int eolLen = eol.length();
FileReader reader = new FileReader( file );
BufferedReader buffer = new BufferedReader( reader );
PlainDocument doc = new PlainDocument();
for ( String line = buffer.readLine() ; line != null ; line = buffer.readLine() ) {
    int len = doc.getLength();
    if ( len > 0 ) {
        doc.insertString( len, eol, null );
        len += eolLen;
    doc.insertString( len, line, null );
}and now you have a document.
: jay

Can I create a network object from CIDR format or do I need to use IP - netmask?

Have a cisco ASA running ASA V 8.3
Wondering what the correct syntax is or even if it is possible to create a network object from a list of IP's in CIDR format?
Typically just do this:
Create network-object
object-group network name
network-object 1.2.3.0 255.255.255.0
Would like to do this:
network-object 1.2.3.0/24
thanks!

Hi,
As far as I know the ASA does not support entering a network/subnet mask in such format in any of its configurations.
- Jouni

Can't create %100 width object

Similar Messages

Maybe you are looking for