Can't create a new service for thunderbolt/ethernet in 10.10

First, I'm not sure how long this has been going on since I generally have WiFi on in addition to a Ethernet connection if I'm on the LAN (wire). Second, I've got a new system board in the machine from about 3 weeks ago replaced by Apple via Apple Certified Vendor. All done from Genius Counter. Third, whether a router or switch in my network, the MacBook Pro Thunderbolt/Ethernet can't see past its own port. That said, the transmit and send lights on the router or switch for the MBP are happily blinking away as a Gb connection with all the other connections. I'm stuck back at the MBP as the culprit as of right now. I've moved from the switch to the router, changed cables, deleted the offending services (which is why I was adding them back). Pings to the gateway, router, and switch with no reply's (didn't expect any).
Note, I'm running 10.10.3, all network equipment is Netgear except the router which is Arris (Comcast).
Any ideas would be appreciated...

This can be achieved with a mail-merge type script.

Similar Messages

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.

May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete.

Creating a new service for James

Hi everyone!
I've got a really big problem..:(
I would like to create a new "service" for James.
I would like James to check for email stored from 2 months and do some actions. I wrote the code necessary to do this... but I don't know how to fit it in James...:(
Should a create a new block??
I read phoenix documentation too...:(
Pls help me!!!
Thanks to everyone!

Hi Dan,
As you have discovered, no that won't work. The only position that has system behavior associated with it in RC06 is the system-defined Manager position for a Service Team.
However, it is the Service Manager Site Permission that enables a user to reassign tasks, not the Manager position for a Service Team. What the Manager position gets you is the convenience of seeing the Service Team, and all of its members, in one place in ServiceManager.
Any user with the Servic

Two iPod touch devices sharing an Apple ID. Can I create a new ID for one of them, and will I lose everything if I do?

My three young sons pooled their money and bought an iPod touch a few years ago. The oldest decided he wanted his own. We bought him one for Christmas last year, and I set it up using the same Apple ID. My oldest son downloaded some games but soon found whenever his brothers played the same games, the progress and changes were transferred to his device and vice versa. Is there a way to create a new Apple ID for the old device? If I am able to do that, will the younger kids lose all their pictures and videos? I am not concerned about them losing games or music. They have very little paid content on their iPod, but the older one has hit the age where he wants to start downloading music and better apps. Thank you for any help!!

It the devices have iOS 8 then use Family Sharing
http://www.apple.com/ios/ios8/family-sharing/
Family Sharing and Apple IDs for kids - Apple Support
Not that yo have to be at least 13 for a regular ID
Changing the ID does not erase any Data from the device
CHANGE ID
The ID is used in the following locations and you have to change them.
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
Settings>iCloud
and Settings>iTunes and App store
You have to sign out of ID (for iCloud you delete the iCloud account from the iPod) and sign in with other ID.
Note the following are resolved if you use Family Sharing (iOS 8 and later):
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.
If the iPod has iOS 7 or later then you have the enter the password for Apple ID presently sign in Settings>iCloud.
Also, a Restriction can be set (Settings>General>Restrictions) the prevents changing accounts

I have multiple phones on the same itunes account but now we can see everyones imessages. Can I create a new account for imessaging?

I have multiple phones that share an apple ID for music. The problem is that when we use imessaging we see eachothers messages. Can I create a separate account solely for imessaging so private messages can be sent but keep the same itunes account and continue sharing music?

Yes.

If I delete my free iCloud email address, can I create a new one for free?

Or did I blow my only free chance?

Yes, they're all free but you can only create 3 on each device, including iOS devices as well as Macs. You can use the same account on multiple devices, but you can only create a maximum of 3 accounts on each device.
This has nothing to do with email aliases. An alias is simply an email address that disguises your actual email address. This is useful to have it your want to use it for signing up for accounts on websites, etc., where you don't want to give out your real email address. Email sent to an alias arrives in the same inbox as email sent to your real email address. You can have up to three email aliases for your account, but again, this has nothing to do with the maximum of creating 3 iCloud accounts per device. This is discussed in more detail here: http://support.apple.com/kb/PH2622.

When merging data into a PDF form, can it create a new form for every record in your data set?

I have a vendor database that I want to use to populate a pre-created PDF form in Adobe Pro XI. I figured out how to rename the form data fields and how import the data from my data set but can't figure out how to have it create another copy of the form for the next record in the data set.... if its even possible. Any help is appreciated!

This can be achieved with a mail-merge type script.

How do I create a new calendar for the current year, using last years calendar's birthday's/photos and comments from the lower pages?

Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe. I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar. How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!! I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
Thanks in advance.
Colin

Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
OT

Error in create a new absence for employee

Hi experts
I have been already config all steps on IMG but i can not create a new absences for employee by IT2001, the error message below "no qouta available for att/abs (absence type) for (Emp No.) between (start_date) and (end_date)". I haven't see any record on Absences Quotas(IT2006).

Hi,
Check in Table V_554S_Q if the absences type is checked for Quota deduction or not. If yes then check to which Absence quota it is linked & then create that Absence Quota in IT-2006.
Regards,
Prasad Lad

How to create a winsow service for managed server 11g

Hi
We have just installed Fusion Middleare 11g weblogic 10.3.6 , our Admin server and managed server are on this very same server.
we are trying to create a window service for start and stop both admin and managed server, we have created a window service for the admin server followed the instruction, but how can we create a window service for the managed server?
any idea?
thanks a lot

Hi Andrew
Thanks for the post. I have already followed that document link. My problem is the DTC does not failover to Second node when I try to move the SQL Server Engine to the other Node or I do a simulate failure option.
But when I shutdown Node 1 all the services move to Node 2 without any issue.
Thanks & Regards
Ravinder

TS2756 How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
but not the usb iPhone i used to have.
And when i try to add a new one i dont get a USB option.
can some one help me please??
this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

IPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) i can only transfer the unedited versions. Any tips? Thanks!

iPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) I cannot choose this edited album, only transfer the unedited versions. Any tips? Thanks!

Hi Anjohi,
Thanks for visiting Apple Support Communities.
If you've edited photos on your iPad and only see the original version when you import them to your computer, the tips in this article may help:
iOS: Edited photos show original photo after import or in other apps
All the best,
Jeremy

I know my Apple Id (not .mac) and password but I can't logon to ichat. I keep getting a message of password not matched. Do I need to create a new account for Ichat?

I know my Apple Id (it isn't ".mac") and password but I can't log on to ichat. I keep getting a message of password not matched. I saw somewhere that my Apple id is the same as my ichat account. Do I need to create a new account for Ichat? I've already reset my Apple id password 3 times in the last 2 days. What am I doing wrong?

Hi,
At one time only Email IDs from Apple (when it was just @Mac.com) were referred to as "Apple IDs"
Other IDs such as to log in to Discussions were know as Discussion IDs
Things like the Online Store and iTunes and Apple realising that people would prefer one ID to have access to Everything tended to move things together.
There can be a variety of combos now
iChat Name
@mac.com before MobileMe
@mac.com post MobileMe
AIM Names
AIM names current
MobileMe (@Me.com)
Style
Email Address valid with the .Mac service prior MobileMe Note 1
Email style Name Valid with AIM
May or may not be an Email address
Can be AIM issued or third party Email address
Valid Email with MobileMe Service
Other Abilities
May also be Currently valid email linked to a MobileMe account
Maybe Valid Apple ID
Is a Valid AIM Screen Name
May Not be a Valid Apple ID (was an option choice at one stage)
Is a Valid AIM Screen Name
May not look like an Email (No @whatever.com) but may be linked to either an AOL email account or AIM one
Current Registration seems to be pushing Email registration (@AIM.com)or asking to use another you currently use.
Trial Accounts are limited to the Trial Period Only as Emails, Valid AIM Screen Names and Apple IDs.
Apple ID
Possibly (likely)
Possibly (depends when Registered)
More currently Yes.
No
No
Yes
Glad I could help.
8:39 PM Thursday; September 15, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can I creat an new iCloud account and make it the primary one for my backups and buy extra iCloud storage for it? Thank you

Can I creat an new iCloud account and make it the primary one for my backups and buy extra iCloud storage for it? Thank you

Hey Hindfromlondon,
Welcome to Apple Support Communities. Since you are posting here, I take it you already have an Apple ID.
You can setup that Apple ID to work with iCloud. See:
Set up your Apple ID for iCloud and iTunes - Apple Support
And you usually want to stick with one Apple ID as having multiples can cause confusion (especially with purchases).
Frequently asked questions about Apple ID - Apple Support
What is an Apple ID?
An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services. You don't have to create a new account for each service—just use your Apple ID.
For a complete list of all of the places you can use an Apple ID, see Where do I use an Apple ID.
and further down:
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
Regarding iCloud storage check out
iCloud storage upgrades and downgrades - Apple Support
I encourage you to read all about it as there's lots of information out there.
Take care,
Nubz

How can I create a new iCloud account for a familiy member having a new iDevice and reuse one of my aliases for it

Hi there,
I moved into iCloud from the very beginning and started with one iCloud account for me and my family, making use of email aliases for family members. Now the number of personal iDevices grows and I want to create a new and separate iCloud Account for my son. The pity is, that I reserved his full name already as alias address on my initial iCloud account. If I now delete this alias, can I create a new account with the former alias as new primary email address?
Or is there at least any transfer procedure supported for aliases between different accounts?
Thanks for your help, lauterbachj

Couldn't agree more... the folks who are getting penalized for this are the early adopters of .Mac/iCloud dating from the days when the only way to implement a "family" account was to use aliases. Now all my kids' / my wife's name aliases sit in my account, unable to move. I guess the good news is that if I delete them nobody else will get them, but this seems a pretty poor consolation.
Would it really be so difficult to implement a "move this alias to another iCloud account" option that requires the "sender" and "receiver" to exchange some sort of code to implement the transation in order to prevent fraud?

Can't create a new service for thunderbolt/ethernet in 10.10

Similar Messages

Maybe you are looking for