Can't create a new SOAP receiver adapter

Hi,
I configure a new SOAP receiver adapter in the integration directory and activate the adapter.
When I send trough XI a message to this communication adapter an error occurs in the defaultTrace.trc :
failed to set up the adapter for channel .....;caused by java.lang.NullPointerException
No stacktrace.
I try to set the communication channel inactive and active and also restart the adapter engine but nothing works.
Do someone solve this problem ?
Regards,
Gerald

Hi Gerald,
Check the below and see if anything is missing/wrong
( may not be the exact order as below, but you need to reach the last one 'your adapter')
runtime workbench->component monitoring -> Integration Server -> adapter engine ->adapter monitoring (in status tab)-> Soap -> your adapter.
Do the same for your 'sender adpater' also
This may help to identify whats wrong in your settings
Hope this helps to fix your issue
Regards
Vishnu

Similar Messages

Creating Digital certificates for SOAP Receiver Adapter

Hi
In Visual Admin...> if we go to the "key storage" and try to create the certificates, we have the options of
selecting the below algorithms.
RSA-512,1024
DH -512,1024
DSA-512,1024
But SOAP Receiver Adapter supports only the below encryption algorithms.
3DES
DES
RC2-40
RC2-64
RC2-128
Still if I try to use any of the RSA, DH, DSA algorithms to create the certificates in visual admin and if I
use the same certificate in SOAP Receiver adapter, I am getting the below error in sxmb_moni
com.sap.aii.af.ra.ms.api.DeliveryException: Unsupported keysize or algorithm parameters.
Could you plz advise, is there any provision in XI to create the certificates using the algorithmS 3DES, DES, RC2 ? or We got to import the certificates from third-party which supports 3DES, DES and RC2 ??
Regards
kumar

can't wait further so closing the thread

Usage of Module processor in SOAP Receiver Adapter

Hi,
I have scenario where I am calling an external Web Service via XI. Unfortunately I need Java Mapping to generate the complete SOAP Message (there are some special header elements required by the Web Service) and flag 'no soap' in the SOAP Receiver Adapter. This works fine, but I have additional Web Service Calls that have the same Header logic and I don't want to use Java Mapping all the time.
I was wondering if it is possible to use graphical User Mapping for the Business Data that goes to the SAOP Body as a payload and use Java code to generate the SOAP Message (actually the SOAP Wrapper and the Header).
Can I do this in XI using the Module processor in the SOAP Receiver adapter or do I have to use two mappigs, one based on the Graphical mapping and another using Java Mapping? Is it feasible at all in XI?
Thanks in advance.

Hi,
You can use Module Processor.
But,
1. If it is a synch call, in when the message is going from the SOAP adapter to the Webservice, you will need to manually Add the SOAP header as you want . ( you will need to create the entire SOAP mesage as the output of the Module ).
2. When the response comes back, the same module will need to remove the SOAP header etc and pass a valid , XML message to the Graphical mapping.
If you have a requirement that some fields of the SOAP header will be needed to be accesed in the Response mapping, then you would need to either add this field to some field in the response payload.
Better option would be to use, Either a Java or a XSL mapping that does all the required stuff for you.
Regards
Bhavesh

Dynamic URL in SOAP Receiver adapter

Hi all,
I have a scenario where I am using a SOAP receiver adapter to send a cXML document to some vendors. I need to change the URL based on the vendor number (passed by sender SRM system). So I have created a user-defined function and used in message mapping to assign the right URL to the variable TServerLocation. But the communication channel still prompts for a static URL which appears to be a mandatory field. Even though the DynamicConfiguration tab in Message Monitoring shows that the TServerLocation was correctly assigned, the scenario does not work when I put some dummy in the static URL field like 'dummy' or '*'. Any ideas on how to make the communication channel go for the dynamic URL field and ignore the static URL field? I have already selected the'Use Adapter Specific Message attributes' and 'Variable Transport Binding' check boxes. Am I referring to the correct variable that references the target URL? Also other than the two checkboxes that I mentioned, I am not displayed anything else under "Adapter Specific Message Attributes" section in the comm. channel.
Thanks

James,
I ve just been digging into SAP help, and have tried it too ... Looks like it doesnt work the way it is supposed to.
Anotheer point i found was, in the FILE ADAPTER, when we say ADAPTER SPECIFI ATTRIBUTES , we can select the attirbutes.. This is not possible in a SOAP adapter...
Maybe, we can only access the ADAPTER SPECIIFC ATTIRIBUTES of a SOAP adapter, but cannot set them dynamically.
Let me know if you find something on this issue.
Regards,
Bhavesh

SOAP Receiver Adapter using SSL - PI 7.0

Hi all,
i am currently faced with a .net WCF webservice integration using https via SOAP Receiver Adapter in PI 7.0.
Can anybody tell me into which Visual Administrator view i have to import my certificate in order to get https working ?
Thanks in advance,
Martin

It must be the View you have created for your partners. There is usually a Trusted view where you have your own certificate. And there are other views where partners cerificates are stored. There you have to store the certificate.
Regards,
Prateek

SOAP Receiver adapter with attachments not working

Hello,
I have a simple synchronous scenario like this; ABAP proxy with attachments to SOAP with attachments.
The SOAP receiver adapter has been configured with the parameters 'Do not Use SOAP envelope' and 'Keep attachments'. We create our own SOAP envelope with custom SOAP headers, so that's the reason for the 'Do not use SOAP envelope' setting.
When we test the scenario with an attachment then we get a timeout from PI. However, when we test the same scenario without any attachment then no errors occur.
The external webservice has also been tested with SOAP UI and it works fine.
Do you have any clues what the problem can be? What are we still missing in the configuration?
We did try with the adapter modules such as PayloadSwapBean and the Message TransformBean, so far without success...
Many thanks.
Roberto

Hi Stefan,
The attachments are not really big, around 150KB.
According to the other party (Oracle Service Bus) no messages with attachments have been received. In fact it seems like those messages never leave the PI server. SOAP requests without attachments are processed successfully.
Thanks
Roberto

How to use given WSDL into SOAP Receiver Adapter.

Hi all,
http://www.webservicex.net/ValidateEmail.asmx?WSDL
I want to use this above given WSDL into SOAP Receiver Adapter.
Can I directly use this link into SOAP Receiver adapter.
Or first I need to register or deploy it somewhere in PI ( Services).
If Yesu2026 Kindly show/Provide me the way..
Regards
Prabhu.

Thanks to all,
i will now try to make the complete end to end scenario.
thanks for now.
I hope above given information would be enough to make end to end webservice scenario.
for now, i i am closing this thread.
if i will find any more further problems in this ... i will come up with new thread.
Thanks all,
Prabhu
I have assigned 2 Points to AMIT , abishek
Edited by: Prabhathcl on Jun 9, 2010 8:39 AM
Edited by: Prabhathcl on Jun 9, 2010 8:39 AM
Edited by: Prabhathcl on Jun 9, 2010 8:40 AM

Issue while passing Target URL dynamically in SOAP Receiver Adapter

Experts,
I am stuck with an issue while passing the Target URL dynamically.
The UDF required for this works just fine. I can see the Target URL in Dynamic Configuration header(The Key is TServerLocation) in SXMB_MONI but the request that I am sending is not reaching the web service.
Some posts have suggested to hard code the Target URL as http://.
Below is the error that I am getting when I hard the Target URL as http://:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>RecoverableException</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
When I hard code the Target URL as Test (any dummy value), the error that I get is different. (Detailed error shown below)
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>RecoverableException</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: no scheme
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
I've referred the post [Dynamic URL for SOAP receiver adapter;.
I am on PI 7.0.
Any help in this regard is highly appreciated.
Best Regards,
Vijay

Issue resolved... by doing this:
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "TAuthKey");
conf.put (key2, "username");
In the advanced tab of the communication channel, set the flag "View Authorization keys", and then added "username" (user to access the dynamic target url) and the password (2 times).
That's it...

How can I create a new iCloud account for a familiy member having a new iDevice and reuse one of my aliases for it

Hi there,
I moved into iCloud from the very beginning and started with one iCloud account for me and my family, making use of email aliases for family members. Now the number of personal iDevices grows and I want to create a new and separate iCloud Account for my son. The pity is, that I reserved his full name already as alias address on my initial iCloud account. If I now delete this alias, can I create a new account with the former alias as new primary email address?
Or is there at least any transfer procedure supported for aliases between different accounts?
Thanks for your help, lauterbachj

Couldn't agree more... the folks who are getting penalized for this are the early adopters of .Mac/iCloud dating from the days when the only way to implement a "family" account was to use aliases. Now all my kids' / my wife's name aliases sit in my account, unable to move. I guess the good news is that if I delete them nobody else will get them, but this seems a pretty poor consolation.
Would it really be so difficult to implement a "move this alias to another iCloud account" option that requires the "sender" and "receiver" to exchange some sort of code to implement the transation in order to prevent fraud?

How can I create a new iCloud account and transfer my apps?

I'm sharing an iCloud and iTunes account and want to have my own. Can I create a new iCloud account and transfer my contact list? If I keep the existing iTunes account with the new iCloud acct, can I reload my apps without purchasing them again? I understand I can create a new iTunes acct afterwards.

OK, so you can create a separate Apple ID for yourself that you use for your Messages, iCloud, Mail, FaceTime, etc. and keep the one that you have your Apps on as your iTunes "Family" Account.
Before you set up your new Apple ID, be sure to delete your iCloud account from your device: Settings>iCloud, scroll to the bottom and delete the account. Save your Contacts on your phone so you can merge them with your new iCloud account. Your notes, and Photos will still be on your old iCloud account, but if you want to keep any of your photos on your new iCloud account, it would be a good idea to import all of your photos to your computer first, so you can selectively download them to your device. (Note: only your Photo Stream will go away when you delete your iCloud account. Your Camera Roll will stay in place. It's just a good idea to back up that Camera Roll to a computer or to your new iCloud account immediately once you have set it up.
You then would set up a brand new Apple ID for you under Manage your Apple ID: Apple - My Apple ID
Once you get it set up, go into your devices and sign off the following:
Settings>Messages>Send & Receive, click on your "Family" Apple ID and Sign Out
Settings>Facetime, click on your Apple ID and sign out
You will leave your "Familiy" Apple/iTunes ID signed on on the iTunes & App Store, becasuse you willl continue to share your iTunes account with the family. Here is a little more info about using two Apple IDs:
Using your Apple ID for Apple services
Once you have your new ID set up, go back into Messages and FaceTime and sign back in with your new ID
Also, go to Settings>iCloud and sign in with your new ID, and be sure to "Merge" your contacts into your new iCloud account.
Post back with any questions!
Cheers,
GB

SOAP receiver adapter digest authentization

Hallo,
I have scenario with SOAP receiver adapter configured as follow:
Adapter Type: SOAP
Transport Protocol: HTTP
Message Protocol: SOAP 1.1
Adapter Engine: Integration Serer
Target URL: http://localhost:8099/webservices/test_v1_1_2
Configure User Authentication
User: ****
Pasword:****
but WS need digest HTTP authentication and SOAP adapter send in header Authentication: Basic.
Hou can I change authentication method for SOAP protocol?
Thx

Hallo,
I solved this problem by using AXIS framework. I hope that this short instruction help to someone.
1. In SOAP receiver CC you have to set up Transport Protocol to HTTP(AXIS) and Message protocol to AXIS
2. Now you can switch Authentication to Digest (NOW adapter will still send Basic!!! Digest Authorization is Supported only by the following handler: com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender)
3. On Module tabs in section Module configuration change type HTTPSender to CommonHTTPSender:
(trp handler.type java:com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender)
4. Save and Activate
Before you start to use AXIS framefork you have to deploy necessary library.
This thread help:
Re: How to install SOAP Axis adapter and where is it available ??
Be carefull, for digest authorization you have to linked Optional library "Jakarta-Commons HttpClient" too.
Good luck.
JK

Soap Receiver Adapter Error. Pls advice urgent

Hi All,
While using Soap Receiver Adapter for synchronous communication
*My Soap Request is:*
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:SendMessage xmlns:ns1="urn:MMWebSrvService">
<strFrom>XI</strFrom>
</ns1:SendMessage>
*My Soap Response from server is:*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<tns:SendMessageResponse xmlns:tns="urn:MMWebSrvService" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<return xsi:type="xsd:int">-1</return>
<strErrorDescription xsi:type="xsd:string">String reference not set to an instance of a String. Parameter name: s</strErrorDescription>
</tns:SendMessageResponse>
How to resolve the error.
Regards

Henry,
Your xml message is not xsd compliant...see if you can generate a xml message using your wsdl with random values, compare that to your imcoming msg..and thats your issue..
Hope that helps
Regards
Ravi Raman
Reward points if helpful !

SOAP receiver adapter for Axis

Hi,
I used SOAP receiver adapter for Axis like below:
Transport Prorocol : HTTP
Message Protocol : Axis
Url: http://<IP>:<Port>/xxx/WebService/services/Head/yyy
Authentication : Basic
User: <user>
Password: <password>
SOAP Version : 1.1
SOAP Action: : <method>
Encapsulation Format : MIME
Payload Extraction : SOAP Body
When i drive PI message it generates error below.
What must i do to solve this problem?
Thanks.
Error message
com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.adapter.axis.modules.AFAdapterBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.adapter.axis.modules.AFAdapterBean@20715646 for bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: javax.ejb.CreateException: java.lang.NoClassDefFoundError: org/apache/axis/types/URI$MalformedURIException

*Url:* http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest
When i use Url with *?wsdl* it generates below (it'is very long. I give part of it)
wsdl
<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:intf="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:tns1="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" xmlns:tns2="http://schemas.hp.com/AssetManager/R51/ACMetaData" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- 
- <wsdl:types>
- <schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:AdministrationTypes="http://schemas.hp.com/AssetManager/Custom/Head/Administration/Types" xmlns:CableTypes="http://schemas.hp.com/AssetManager/Custom/Head/Cable/Types" xmlns:CatalogTypes="http://schemas.hp.com/AssetManager/Custom/Head/Catalog/Types" xmlns:ChargebackTypes="http://schemas.hp.com/AssetManager/Custom/Head/Chargeback/Types"
<import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" />
<import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" />
- <annotation>
<documentation>Auto-generated schema for AssetCenter web services for Head/SapTest Implementation</documentation>
</annotation>
<import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SAM/Types" schemaLocation="../../schema/Head/SAM/SAMTypes.xsd" />
<import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" ......
<wsdl:operation name="retrieveAllBusinessAPIListByName">
<wsdlsoap:operation soapAction="retrieveAllBusinessAPIListByName" />
<wsdl:input name="retrieveAllBusinessAPIListByNameRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="retrieveAllBusinessAPIListByNameResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SapTestService">
<wsdl:port binding="impl:SapTestSoapBinding" name="SapTest">
<wsdlsoap:address location="http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

SOAP Receiver Adapter / Scenario calling WebServices

Hi Experts,
I am trying to call a web service. Configured a SOAP Receiver adapter. Message to Web Service goes fine but not shown with Checkered flag, but with icon with description "Log Version".
In response message for the request Error Category - MAPPING and Error ID "Cannot Read Payload".
Any ideas to clear this problem. I do have response mapping assigned to Message Interface. Message Interface is Synchronous.
Thanks in advance for any solutions.

can you verify that you are getting a response..try re-routing that to tcpgw and check if content is in line with expected response.
Regards
Ravi Raman

SOAP Receiver Adapter issue

Hello there,
I am using a SOAP receiver adapter. The URL contains the format - https://<XYZ.com>/car/soap/Sync?login=username&pass=password
Now, if I configure the channel by using the "Configure User Authentication", the data is not getting posted at target.
But if I provide the user id / pwd in the URL, it gets posted.
I don't want to use the user id / pwd in the URL but at the sametime, the WS team is not ready to change the format of the URL.
Can I use "Query String" to handle that? If yes, how? If no, what options I have?
Thanks for your precious input and time.
Abhi

Thanks Suraj!
Have you tried this:
url : https://<XYZ.com>/car/soap/Sync
and Configure User Authentication option set
I haven't tried it that way. I am not sure whether that will work, as WS team told me that I am required to put in the whole URL. But thanks for your suggestion, I will give it a try that way.
also try specifying the SOAP action as per your wsdl file
SOAP Action is not Mandatory, so I am not using that.
Thanks,
Abhi

Can't create a new SOAP receiver adapter

Similar Messages

Maybe you are looking for