Can't create a window for execution. GDI or User resources too low

I get this error when i try to do a single pass on my sequence.
the labview code issued involves Classes and a lots of Vi's that are included on a Hardware Abstraction Layer
the sequence executes but i cant see anything on the screen like the pass fail data, or the trace arrow to see which step is executing.
have you guys seen this before?

You can check the GDI and USER object usage of your process in the Window's task manager (you can enable columns which will show this for all of the running processes). Is it very high? If so you might have some code which is leaking GDI or USER objects somewhere. Or do you have a lot of windows open in TestStand? If so then you could legitimately be using a lot of GDI or USER resources.
Hope this helps,
-Doug

Similar Messages

Hi. I want to build a GUI based on several windows appearing following a certain sequence. How can i create different windows in the same VI? Also, i want the front panel of a subvi to appear when i run, how can i enable this.Thanks

Having several windows appear ...

Hi,
You can't create several windows for one VI. But you can use the "Tab Control" and change tab's in the program. Or you can use sub VI's and show ther front panels.
To show the front panel of a sub VI you have to open the VI you want to show and select "File->VI Properties". In the VI Properties window select Category "Window Appearance" and click Customize...
In the Customize Window Appearence window, here you can set a number of attributes for how the window will appear, select "Show front panel when called" and "Close afterwards if originally closed" click OK and OK and save the VI, done.
Now the VI front panel will appear then you use it as a sub VI.
/Thomas

Can we create a window in a window?

hi friends,
i am designinf a form.Can we create a window in window .I want in a window there is abox like thing hw to design that box .
please help me out.
Edited by: tumma vandana on May 14, 2008 5:49 PM

1. /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
2. /: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
3. /: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each parameter (XPOS, YPOS, WIDTH, HEIGHT and FRAME), both a measurement and a unit of measure must be specified. The INTENSITY parameter should be entered as a percentage between 0 and 100.
XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH: Width of the box.
Default: WIDTH value of the SIZE command.
HEIGHT: Height of the box.
Default: HEIGHT value of the SIZE command.
FRAME: Thickness of frame.
Default: 0 (no frame).
INTENSITY: Grayscale of box contents as %.
Default: 100 (full black)
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.

Yoga 11 - can not create an account for the App store,

I can not create an account for the App store, I live outside of the USA and the only address option is in the USA. Can you help me
Moderator Note: Edited subject to match content.

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
I have verified the Microsoft windows 8 app store has different regions listed
And you can connect app store using an existing Microsoft account like Hotmail, msn etc.
Please refer below link
http://windows.microsoft.com/en-US/windows-8/explore-windows-store#1TC=t1
Also if you can share the link or screen shot of the app store to help you further
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Can i create two playlist for two i-pods

can I create two playlist for two I-pods

Hi rcranford,
Welcome to the Apple Support Communities!
You can create different playlists in iTunes on your computer and sync only the specific playlist you want to each device. Please use the following article for information on creating playlists in iTunes.
iTunes 11 for Windows: Create a playlist
http://support.apple.com/kb/PH12340
Have a great day,
Joe

How can I create a URL for a PWA for MS Project Server 2010 project file that includes the view?

Hi, this question has been answered for 2013. The answer here suggests that it can be done in 2010.
See:
http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
Who knows how?
Regards
Sander

Hi Sander,
As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How can i create a Trash for external USB Drives ?

Hello,
how can i create a Trash for external USB Drives or my TimeCapsule ?
Thanks.

You do not need to create trash cans for individual drives. The trash can on the desktop holds deleted files from all mounted drives.
TimeCapsule manages its own space. If it fills up it will delete older backps to make space for newer ones.

How can I create a form for users wherein the text field will expand to accommodate additional text?

How can I create a form for users wherein the text field will expand to accommodate additional text?

You need to use LiveCycle (PC Only) to create a dynamic form like that.
The best you can do with Acrobat to view all of the text in a field is to set the field to multiline, and set the size to "Auto" (If you don't set the size to 'Auto', you can enter as much text as you wish, but the user will need to use the scrollbar to view all of the text.)

Can we create two POs for the same 3rd party Sales Order?

Hi MM experts,
Issue: Can we create two POs for the same 3rd party Sales Order
In Third party purchase process, first sales order created with a spl. item category and it creates the PR automatically with the Sales order material and Qty and this PR converted PO.
They got a pur.req. for sale order on same item for same delevery date. They did not get any warning msg. saying that a PO was prviously placed against this sale order.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
If anyone face the same issue, please let me know if you have any answer to this questions.
Thanks in advance.
Suresh.

Suresh,
It is hard for me to give you a definitive answer since you have created a customized solution.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
Normally, the system will not do this. A third party PR or PO will be 'account assigned' to the Sales order. SAP standard 3rd party will not create additional purchase reqs unless there has been manual intervention. Try searching for changes in the Sales order and changes in the original purchase order. They may give you a clue.
I believe the normal Item category for third party SO is TAS (I am working from memory here, I am not in front of a system). I don't know what ZTAG does. I confess I am not an SD expert. You might also want to post your question in an SD forum.
You mention two custom applications, ZMMPLAN and ZSTPMP. These somehow have functionality that is used to help you convert your PRs to POs. If I were in your position, I believe I would also look at these applications for clues to how they might be contributing to your problem. And please don't send me details about these apps. I will not comment on custom code in this forum.
Sorry I can't be of more help.
Rgds,
DB49

Can v create graphical display for the report

Hi to everyone
my q is this can v create trend lines for a report ........
if the ans is yes then pl mention the way of doing it .......

when you run a bex report on the left top you have a button "graph". If you click this, you get a basic chart representing your output table. when you right-click on the chart you get the option menu as you get in xls, meaning you can change the type of chart (line, bar, pie,...) the series, the titles and so on (like regular xls)
so the answer to your question is yes. If you want even more features you can use workbooks.
M.

Can i Create Output Variable for DB Polling in BPEL 11g?

Hi Team,
I want to create the Output Variable for DB Polling,But when i double click on Reply Activity-->Create New Variable it is giving error message like "Can't Create output variable.The Selected operation doesn't have an Output Message".
My Question is Can we create Output Variable for DB Polling, if Yes tell me the procedure to create the Output variable ?
Regards,
Kiran

Hi Kiran,
In these scenario generally runtime faults occurs so you can use the CatchAll activity and rethrow activity to complete the instance in error state. Also before the completion of the process if exception occurs you can rollback all the transaction.
or
you can use the Fault handling framework:
Using Fault Handling in a BPEL Process - 11g Release 1 (11.1.1.7)
Regards,
Anshul

Can I create folders (albums) for my photos and move them?

Can I create folders (albums), for my photos and then relocate said photos to specific folders?

These links may be helpful.
How To Create Photo Albums http://tinyurl.com/cxm4eoq
How to Add New Albums in the Photos App on the iPad & Add Photos to the Album
http://tinyurl.com/7qep7fs
 Cheers, Tom

Can we create serach help for a selection screen field

Can we create serach help for a selection screen field with out creating searchhelp object.
I mean is it possible to create serchelp in the program itself with some specific values i want to give.
E.g say we can define any internal table and fill it with values and using that into selection screen fields
Regards
Mave

AT SELECTION-SCREEN ON VALUE-REQUEST FOR paymeth.
PERFORM PAYMENT_HELP.
FORM PAYMENT_HELP.
DATA: begin of DESCR_TAB occurs 0,
        DESCR LIKE BKPF-BKTXT,
        END OF DESCR_TAB.
DATA: gd_repid like sy-repid.
gd_repid = sy-repid.
DESCR_TAB-DESCR = 'aaaaa'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'bbbbb'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'ccccc'.
append DESCR_TAB.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'DESCR'
            DYNPPROG    = gd_repid
            DYNPNR      = '1000'
            DYNPROFIELD = 'paymeth'
            VALUE_ORG   = 'S'
            DISPLAY     = ' '
       TABLES
            value_tab   = DESCR_TAB.
endform.
Svetlin

Can we create an index for a list of itmes in a single object?

Can we create an index for multiple values in a single object. We have an object Order that contains list of items. I like to get all orders for a specific item. I want to create an index to speed up the query. Is it possible? What are the other alternatives?
My Order object is as follows:
Orders
Item List
Shipping Address
Example:
Order 1
i1, i2, i3, i4
123 some way, city, 12345
Order 2
i2, i3
333 some other way, city2, 33333
order 3
i2, i4, i7
My search would be, give me all orders that has item i2. It should return Order 1, Order 2 and Order 3.
Thanks

Hi,
I think that this will work ...
ValueExtractor extractor= new ReflectionExtractor("getItemList");
cache.addIndex(extractor, true, null);
Set setKeys = cache.keySet(new EqualsFilter(extractor, i2));
In this case, the Collection value extracted by the ValueExtractor is treated as a Collection of contained attributes when the index is created.

Can I create a network for printing & music alone ?

I don't have DSL or any type of broadband - still using dial up.
If I buy an Airport Express can I configure it to wirelessly print and stream music or do I need a wireless network in the background to make this work ?

Can I create a network for printing & music alone ?
Yes
If you also want internet access at the same time you will need to tweak things a bit.

Can't create a window for execution. GDI or User resources too low

Similar Messages

Maybe you are looking for