Can't create a WPA2-Enterprise wireless connection; missing Microsoft: PEAP

OS: Windows 7 64-bit Enterprise
Hardware: Lenovo T410S w/Intel 5300 ABGN Wireless
If I try to build the wireless connection manually and choose WPA2-Enterprise, then click next, I get 'An unexpected error occurred.' and no options to configure; just close.
I then tried to create a Preshared Key WPA2 connection. This worked fine. When I go to edit the connection, I have the ability to select the WPA2-Enterprise options, however in the list of Network Authentication methods (under Security Tab), I don't have
the Microsoft: PEAP or SmartCard options. I only have Cisco: LEAP,PEAP,EAP-FAST and Intel: EAP-SIM,EAP-TTLS,EAP-AKA (6 entries).
It's my theory that because the Microsoft options are missing, the wizard gets the unexpected error. I'm wondering how I get the MS ones back.

Hi,
Thanks for posting in Microsoft TechNet forums.
Do you have Symantec installed? It is said the issue could be due to conflict with Symantec Endpoint Protection. Please uninstall\reinstall Symantec
if it is there.
Best Regards
Magon Liu
TechNet Subscriber Support
in forum. If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

Can you use Iphone hotspot to wirelessly connect to apple TV

Can you use Iphone hotspot to wirelessly connect to apple TV. ie I have no router but am interested in playing music from phone to apple TV.

Yes in theory, though do check your phone contract small print and keep an eye on your data usage - in theory local data sent across the LAN created by the hotspot should not use 3G data but some carriers seem to treat it as internet data usage.
AC

Want to create mac to windows wireless connection

i want to create mac to windows wireless connection. i go to airport, then create computer-to-computer wireless. after the windows machine sees my network but cannot connect. tell me how to go about it cos i need to share stuffs with a friend.

You can do it.. it is often unreliable.
https://discussions.apple.com/thread/2736425?start=45&tstart=0
Apple do not support or recommend it.. but you can turn it on.. there must be a million posts with the method.
http://pondini.org/TM/Airport.html
Q2 for the setup..
Good Luck!!

How can I delete the history of wireless connections? Need to delete it entirely, as I have a new airport extreme and I named the network the same as it had previously been,

How can I delete the history of wireless connections? I got a new apple extreme, and I kept that same network name as I previously had with the LinkSys. Now the Mac won't automatically connect to the network. Genious Bar fixed my Pro, they said that you have to delete all the history, not just the network name. I wasn't at the Genious Bar to see how they did it, now I need to fix the Mac. Appreciate any help!

Yes, so...
I have also closed iTunes, reset network settings on the iPad, then shut down and restarted the iPad. Still, I end up with greyed out rectangular icons for all the movies I've ever streamed from my Mac Mini to my ipad via my home wireless router.
Again, I have watched all the way to the end of the movie, selcted the movie in iTunes and chosen "mark as watched", and then deleted it in ITunes.
Any ideas?

IOS 5 can't connect to WPA/WPA2 Enterprise Wireless Network

After upgrading multiple iPhone 4 (CDMA versions) to IOS 5.0, I have not been able to get them to connect to our WPA/WPA2 Enterprise wirless network. We use a Cisco Wireless LAN Controller. The wireless network is capable of doing WPA or WPA2 Enterprise with PEAP. These phones all connected to this network fine before the upgrade.
When connecteding to the network, it prompts me for the username and password and when I tap join it sits for about 10-15 seconds then says "Unable to join the network" with a Dismiss button.
It connects to non-Enterprise networks just fine. I have tested it on WPA Personal and WPA2 Personal networks and it has worked on several without issue.
I have tried "forget this network" with no success.
Is anyone else having this problem? I know of at least three Verizon iPhone 4's that have this exact same problem. I haven't seen one working with this configuration yet.

I have the same problem:
Cisco WLC's -> WPA2 Enterprise AES + EAP-PEAP 802.1x with CCKM
Pre 5.0 - all worked fine
Post 5.0 - it tries to connect and after few moments i get error - couldn't connect.
Info from controller:
10/17/2011 12:16:37 CEST           INFO           172.16.16.X           Sending EAP request to client from radius server. 6.f. ..l
10/17/2011 12:16:38 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:39 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           Authentication failed for client as EAP ID request from AP reached maxmium retransmissions. 5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           De-authentication sent to client. 5.oP ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           EAPOL-key is invalid, scheduling client for deletion. 5.yp ..l
On the Radius server i don't see any activity regarding this device.
I had this network configured on my iPhone - after upgrade and restore it remembered it. Every time i was in vicinity of my Enterprise WLAN it tried to connect - resulting int express battery drain - 6-7 hrs and battery was empty from 100%

Can't create a dial up modem connection

hi...
need help here.
i have lenovo 3000 notebook V200 series with build in conexant modem, i have installed the modem driver correctly, i have query the modem and it shows the result successfully. but why does vista doesn't detect the modem when i'm trying to create a dial up modem connection ?. i also use the wireless 3G modem provided by AT&T. can anyone help me ? thank you...
sincerely
arifin

what do you mean? you can't create dial connection or you dont heard dial tone when you try to connect? Did you see under hardware devices. Does it show moderm at all? Try to hook up phone line to it and listen to dial tone? if It does. It would work fine. or you can upgrade moderm driver to see if you can create connection again.
Good luck to you

IOS 5 WPA2 Enterprise WiFi Connectivity Issue

In IOS 4 i was able to connect easy to my company Enterprise network using WPA2 Enterprise (With Domain username and password). While initail Wifi setup in IOS 4 it used to ask me for accepting a certificate. After upgrading i noticed that it does not ask for certificate anymore but still connects on first attempt. After turining wifi off and on Wifi does not connects automatically instead if i check that network it ask me to enter password and join (my company network does not use preshared key instead use Domain credentials).
After googling i found out that from iOS 5 onward MD-5 signed certificates are no more supported. My network administrator is not interested in changing the signing method of certificate.
Can any one please help me for fixing this issue?

Hi Attiq 123,
Thanks for the question. It sounds like you are experiencing issues with your network connection, specifically when connecting to Apple services like iCloud and the iTunes Store. The following resource provides some troubleshooting steps that you can try:
Can't connect to the iTunes Store - Apple Support
http://support.apple.com/en-us/HT201400
You may also need to test to see if the specific ports on your Wi-Fi network are accessible:
iTunes: Advanced iTunes Store troubleshooting - Apple Support
http://support.apple.com/en-us/TS3297
Make sure the issue is with the iTunes Store only. (You need an Internet connection to access the iTunes Store).
Open a secure website to test if you are online as is necessary for the iTunes Store. This also tests if the main ports 80 and 443 are accessible. If the website works but the iTunes Store does not, it is most likely a firewall blocking the iTunes software or servers. If this is the case, follow the steps in the "Blocked by software firewall" section below.
- Matt M.

How can I create a mobile application to connect with my php system

II have few question to ask all expert here :
1. Im using Netbeans IDE, how can I compile the .java file to .jar ?
2. Currently, I have created a point of sales application using php and I hope to create a Mobile application to connect with tis system. So, anyone can let me know what I need to start ?
3. Im using postgresql database, anyone here know how to connect with mobile application?

!. When you build java application in NetBeans (standard one) you just click 'Build' or 'Clean and Build' and your jar file is waiting for you inside 'dist' directory of your project
2. Connecting MIDP application to the server running PHP scripts is not a problem, just connect using simple HTTP with GET or POST and you are done, google on it!
3. You can connect to the database using some kind of PHP/JSP/ASP or whatever application you want and then using method from point 2 to send and retrive values, you can do it with web services as well, possibilities are endless
Hope this helps!
Kris

I can't seem to use the wireless connection to connect from my macpro to hp officejet 4500 g510g-m

Hi, I don't know how to connect my hp officejet 4500 g510g-m to my mac book pro. can anyone help me? i can't seem to find the ip address for the printer. this can be connected wireless right? it wasn't connected to the modem. it is okay?
Thanks in advance.

Hi,
The Officejet 4500 support ethernet connection only, using wired network connection.
Only the 4500 Wireless model provide wireless connectivity.
Please make sure to connect the printer to your router, then it should become available from the Mac.
For any further issue, please clarify what router you are using.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can I ignore server certificate for wireless connection?

I just got a Treo 800w and can't get it connected to my work wireless. It uses PEAP MS-CHAPV2. How can I get the device to ignore the server certificate?
Thanks,
Adam
Post relates to: Treo 800w (Sprint)

You can't. You would need to have your IT to setup the wireless with the certificate on the device.
Post relates to: Palm Z22

Why can't I keep a steady wireless connection?

I have two iMacs that will not keep a constant wireless connection. For example, if I've been away from them for ahile and I pull up Safari it will just say "You are not connectetd to the internet.'' Then about 30-60 seconds later it will connect. It's not the ISP becuase I have had both computers in a total of six different locations(three houses) and it does the same thing at each location. It isnt possible for me to have a wired connection so thats out the window. I jjust want to be able to click on Safari and bam, I'm on the internet. How can I make that happen? Thanks.

miafromca,
they don't post the status anywhere I am aware of. Ypu can look at the latest downloads on the support page or just check for software updates. I'm thinking it will be soon and when it is it will probably be announced by someone on this forum.
:^{)

How can I share my iPhone's wireless connection with my Mac?

My iPhone is the only device I have that connects to the internet. I cannot use the personal hotspot option because I don't have the necessary plan, nor will I be getting it since it is extremely expensive. How can I share my iPhone's connection?

Mac_Journal wrote:
A different question then: Can I create a functioning wifi network from my Mac?
Yes.
-> OS X Mountain Lion: Create a computer-to-computer network
Note: This will not allow you to connect your Mac to the internet via your iPhone (since you need a personal hotpost to share the internet with yrou Mac).

WPA/WPA2 secured wireless connection fails for two minurtes for every hour of use.

Hello.
I have a brand new ThinkPad T500 2055-A16 with Windows Vista Business. I have a WiFi connection problem. It is not a signal strength problem, as it doesn't work even if I place the computer right next to the access point with no other wireless equipment near by.
None of my other computers experience this problem. I even bought another ThinkPad T500 2055-A16 at the same time as this one, and that does not have the problem either. The problem is when I connect to a network using WPA2-PSK or WPA-PSK. The connection works fine for half an hour, an hour or two hours, but then without warning, the connection is lost and it is not possible to reconnect for half a minute, a minute or two minutes. The exact times vary. When I switch the network to use WEP or no encryption, everything works fine. But I don't like to use no encryption and I cannot use WEP because I have other computers in my home which does not support WEP.
I had this problem right from the beginning the first time I used the computer. I have tried many things like disabling power management or IPv6 and other things suggested by my ISP, but it did not change anything, so I switched them back to their default value. I have also tried to update the driver for the Intel(R) WiFi Link 5100 AGN card, but that didn't help the problem. The problem became slightly less annoying when I uninstalled Access Connections, because Vista would then reconnect as soon as it could, whereas I in Access Connections would have to continuously press the connect button until it succeeded. But the problem is still a real pain.
Some pieces from the Windows Event Viewer, which I think looks interesting (these occur regularly at exactly the same timestamps as when the connection is lost):
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Fail
0x00048005 and 0x0003800b
Result of diagnosis: Problem found
Issue referred to: L2Sec Helper Class
I also see the following message on my access point's log, which also occur at exactly the times when the connection is lost:
1x:00216b4d7ee6:logout
(The number match the MAC address of my computer)
The only other message which is logged on my Access Point when all log options are enabled is "Time initialized by NTP server".
How can I solve this problem so that I can have undisrupted wireless Internet access?

Edit: Actually my other ThinkPad T500 2055-A16 also fails in the same way, but my ThinkPad SL500 2746-9BG and my Medion laptops works fine, also running Vista.

[Solved] Trouble with WPA/WPA2 and wireless connections (ath9k)

Hi, I'm having some issues with my Arch install. Right now I'm posting this from Windows so I don't have precise logs, but I mostly remember the issue so bare with me.
I'm using ath9k with my Bigfoot Killer 1202 card (not sure what the exact model is), and I can't connect to my university's WPA/WPA2 access point. Using wpa_supplicant I get the error "4-way handshake failed - pre-shared key may be incorrect".
So after some digging I found that I can get it to authenticate with nohwcrypt=1, but when I rmmod ath9k && modprobe ath9k nohwcrypt=1 it enumerates itself as wlan0 (instead of wlp3s0, which is what I get from booting up).
Then I made the file /etc/modprobe.d/ath9k with the contents "options ath9k nohwcrypt=1" but it seems to still not want to connect until I rmmod && modprobe manually.
Can someone point me in the right direction on how to fix this issue? I haven't used Arch in a few years and a lot of things have changed, and so far it seems nothing works as I expect it to. Also, how do I get my wifi card to enumerate as the same device no matter when I load ath9k? I don't care if it's called wlan0 or wlp3s0, I just want it to stay the same.
Edit: Additional Info
lspci
03:00.0 Network controller: Qualcomm Atheros AR9462 Wireless Network Adapter (rev 01)
cat /sys/module/ath9k/parameters/nohwcrypt
[root@huxley pobegam]# cat /sys/module/ath9k/parameters/nohwcrypt
0
(so I guess it isn't loading from ath9k.conf on boot after all?)
wpa_supplicant output
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE
<3>CTRL-EVENT-SSID-REENABLED id=0 ssid="Student"
<3>Trying to associate with 00:19:30:6b:1b:a2 (SSID='Student' freq=2412 MHz)
<3>Association request to the driver failed
<3>Associated with 00:19:30:6b:1b:a2
<4>WPA: Failed to set PTK to the driver (alg=2 keylen=32 bssid=00:19:30:6b:1b:a2)
<3>CTRL-EVENT-DISCONNECTED bssid=00:19:30:6b:1b:a2 reason=1 locally_generated=1
<3>WPA: 4-Way Handshake failed - pre-shared key may be incorrect
<3>CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Student" auth_failures=2 duration=20
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE
wpa_supplicant configuration file
[root@huxley wpa_supplicant]# cat sunyit.conf
ctrl_interface=/var/run/wpa_supplicant
update_config=1
network={
scan_ssid=1
ssid="Student"
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP
priority=1
psk="Wireless@SUNYIT"
Last edited by Pobega (2013-10-02 03:55:51)

Update: It seems to work ONLY when I rmmod && modprobe; if I force nohwcrypt=1 at boot it doesn't seem to work. Seems kind of odd... Wonder if this is a kernel issue?
Edit: Also updated with dmesg (because I'm an idiot and forgot to include it)
[ 2.802118] hub 3-1:1.0: USB hub found
[ 2.802210] hub 3-1:1.0: 6 ports detected
[ 2.876377] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 2.876380] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:90:f5:ea:54:ff
[ 2.876382] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.876418] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 2.876688] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
[ 2.876697] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.908262] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.913682] [drm] Memory usable by graphics device = 2048M
[ 2.913687] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 2.913688] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 2.913702] Console: switching to colour dummy device 80x25
[ 2.913836] i915 0000:00:02.0: setting latency timer to 64
[ 2.948473] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 2.948482] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.948483] [drm] Driver supports precise vblank timestamp query.
[ 2.948547] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.032964] hub 4-1:1.0: USB hub found
[ 3.033016] hub 4-1:1.0: 8 ports detected
[ 3.038244] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.169633] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 3.221450] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 3.237256] fbcon: inteldrmfb (fb0) is primary device
[ 3.271526] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 3.271623] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.491212] Switched to clocksource tsc
[ 4.027317] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00, board id: 2439, fw id: 1215751
[ 4.066270] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 4.477837] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 4.967580] Console: switching to colour frame buffer device 240x67
[ 4.977758] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.977761] i915 0000:00:02.0: registered panic notifier
[ 4.978457] acpi device:45: registered as cooling_device8
[ 4.978479] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.978579] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 4.978690] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.978877] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 4.979210] snd_hda_intel 0000:00:03.0: irq 49 for MSI/MSI-X
[ 4.989927] hda_codec: invalid CONNECT_LIST verb 5[1]:0
[ 4.989974] hda_codec: invalid CONNECT_LIST verb 6[1]:0
[ 4.990029] hda_codec: invalid CONNECT_LIST verb 7[1]:0
[ 4.991935] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 4.992031] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 4.992087] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 4.994100] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 4.994171] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 6.977361] wlan0: authenticate with 00:1d:45:cd:c1:c2
[ 6.987213] wlan0: send auth to 00:1d:45:cd:c1:c2 (try 1/3)
[ 6.988904] wlan0: authenticated
[ 6.989040] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 6.989044] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 6.989046] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 6.990123] wlan0: associate with 00:1d:45:cd:c1:c2 (try 1/3)
[ 6.993437] wlan0: RX AssocResp from 00:1d:45:cd:c1:c2 (capab=0x431 status=0 aid=9)
[ 6.993577] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6.993624] wlan0: associated
[ 6.998736] wlan0: deauthenticating from 00:1d:45:cd:c1:c2 by local choice (reason=1)
[ 7.002835] cfg80211: Calling CRDA for country: US
[ 24.197672] wlan0: authenticate with 00:1d:45:cd:c1:c2
[ 24.207666] wlan0: send auth to 00:1d:45:cd:c1:c2 (try 1/3)
[ 24.209338] wlan0: authenticated
[ 24.209468] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 24.209472] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 24.209474] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 24.210593] wlan0: associate with 00:1d:45:cd:c1:c2 (try 1/3)
[ 24.213338] wlan0: RX AssocResp from 00:1d:45:cd:c1:c2 (capab=0x31 status=0 aid=9)
[ 24.213481] wlan0: associated
[ 24.221396] wlan0: deauthenticating from 00:1d:45:cd:c1:c2 by local choice (reason=1)
[ 24.225880] cfg80211: Calling CRDA to update world regulatory domain
[ 50.045002] wlan0: authenticate with 00:19:30:6b:1b:a2
[ 50.054957] wlan0: send auth to 00:19:30:6b:1b:a2 (try 1/3)
[ 50.056639] wlan0: authenticated
[ 50.056775] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 50.056779] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 50.056781] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 50.057899] wlan0: associate with 00:19:30:6b:1b:a2 (try 1/3)
[ 50.061270] wlan0: RX AssocResp from 00:19:30:6b:1b:a2 (capab=0x431 status=0 aid=89)
[ 50.061426] wlan0: associated
[ 50.073874] wlan0: deauthenticating from 00:19:30:6b:1b:a2 by local choice (reason=1)
[ 50.078661] cfg80211: Calling CRDA to update world regulatory domain
[ 75.892318] wlan0: authenticate with 00:1d:45:cd:c1:c2
[ 75.902267] wlan0: send auth to 00:1d:45:cd:c1:c2 (try 1/3)
[ 75.904108] wlan0: authenticated
[ 75.904254] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 75.904256] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 75.904257] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 75.905145] wlan0: associate with 00:1d:45:cd:c1:c2 (try 1/3)
[ 75.908344] wlan0: RX AssocResp from 00:1d:45:cd:c1:c2 (capab=0x401 status=17 aid=0)
[ 75.908348] wlan0: 00:1d:45:cd:c1:c2 denied association (code=17)
[ 75.918844] wlan0: deauthenticating from 00:1d:45:cd:c1:c2 by local choice (reason=3)
[ 86.045293] wlan0: authenticate with 00:19:30:6b:1b:52
[ 86.059226] wlan0: send auth to 00:19:30:6b:1b:52 (try 1/3)
[ 86.061328] wlan0: authenticated
[ 86.061475] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 86.061477] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 86.061478] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 86.064853] wlan0: associate with 00:19:30:6b:1b:52 (try 1/3)
[ 86.169949] wlan0: associate with 00:19:30:6b:1b:52 (try 2/3)
[ 86.179194] wlan0: RX AssocResp from 00:19:30:6b:1b:52 (capab=0x431 status=0 aid=22)
[ 86.179323] wlan0: associated
[ 89.123073] wlan0: deauthenticated from 00:19:30:6b:1b:52 (Reason: 4)
[ 89.147287] cfg80211: Calling CRDA for country: US
[ 105.770381] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 105.770386] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 105.770418] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 114.898216] wlan0: authenticate with 00:19:30:6b:1b:a2
[ 114.912130] wlan0: send auth to 00:19:30:6b:1b:a2 (try 1/3)
[ 114.914102] wlan0: authenticated
[ 114.914235] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 114.914239] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 114.914241] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 114.914348] wlan0: associate with 00:19:30:6b:1b:a2 (try 1/3)
[ 114.916916] wlan0: RX AssocResp from 00:19:30:6b:1b:a2 (capab=0x401 status=17 aid=0)
[ 114.916920] wlan0: 00:19:30:6b:1b:a2 denied association (code=17)
[ 114.937999] wlan0: deauthenticating from 00:19:30:6b:1b:a2 by local choice (reason=3)
[ 125.064495] wlan0: authenticate with 00:19:30:6b:1b:52
[ 125.078431] wlan0: send auth to 00:19:30:6b:1b:52 (try 1/3)
[ 125.081945] wlan0: authenticated
[ 125.082083] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 125.082094] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 125.082095] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 125.084061] wlan0: associate with 00:19:30:6b:1b:52 (try 1/3)
[ 125.098558] wlan0: RX AssocResp from 00:19:30:6b:1b:52 (capab=0x431 status=0 aid=22)
[ 125.098683] wlan0: associated
[ 127.937457] wlan0: deauthenticated from 00:19:30:6b:1b:52 (Reason: 4)
[ 127.959914] cfg80211: Calling CRDA to update world regulatory domain
Edit: I ended up solving my problem -- the issue I was running into was that ath9k was baked into my initrd without nohwcrypt=1. I opted to `mkinitcpio` again without MODULES='ath9k' -- alternatively, you could add a modprobe.d file to FILES= to get it to work, but I just figured this is simpler.
Last edited by Pobega (2013-10-02 03:57:27)

Can not get WET200 Bridge to wireless connect to EA6900 Router

Hello,
I have a connectivity problem with my LinkSys WET200 Wireless-G business Ethernet Bridge
SN: MVP007800846. Any trouble shooting suggestions appreciated.
My system is Dell Vostro 1500 laptop, with Windows XP SP3
Basis problem: When I try to connect wireless to my NEW LynkSys EA6900 router; I receive the error “Limited or no connection” from the cable connection icon in the system tray. I have tried several things ( restart computer, restart WET200) to make a valid connection with no success.
BACKGROUND and what I have completed:
I replaced my old LinkSys WRT router with a new LynkSys EA6900 router. The EA6900 is up and running (after a few set up problems) and able to connect to both PC and MAC laptops and Android and Mac phones plus a couple of wireless printers.
To set up the WET200, I connected an Ethernet ( ENet) cable from the Wet200 PoE port to a unused port on the EA6900 router. I used my PC desktop Firefox browser to access the WET200 setup screens by entering the WET200 default IP address in the Firefox address bar. I connected to the WET200, entered the default username and password and could see all the setup screens.
I selected the WIRELESS, Basic setup, did a sight survey and my EA6900 network name and security setting was present. I entered the network name in the Basic Wireless setup and changed the WET200 security setting to match the network security setting.
I removed the ENet cable connecting the WET200 to the EA6900 router. Power recycled the WET200. I then connected an ENet cable from Port 3 on the WET200 to the Enet cable connector on my PC laptop.
I then received the error “Limited or no connection” from the cable connection icon in the system tray.
Thanks, krazykat1

Hello krazykat
Need to ask a few questions, so I understand the network and the area this is in. How far apart are the router and WET? Did this work with your previous router, what kind was it? Normally we (Small Business) can not guarantee compatibly with non small business equipment.
I have seen WDS work between a WET 200 and other WET200's, also with some of the other older Small Business routers, like WRV200, and 210.
The main problem is most likely that the EA6900 is too new. I say that because the EA6900 is an AC router, the WET200 only does "G". One of the major components required for WDS to work is that Radio Chipsets match and well as channel, radio signal G to G, G/N to G/N, N to N.
I am afraid that there is too much age difference between your products.
Eric Moyers
.:|:.:|:. CISCO | Eric Moyers | Cisco Technical Support |
Wireless and Surveillance Subject Matter Expert
Please rate helpful Posts and Let others know when your Question has been answered
You can click my name beside the picture if you need to email me directly

Can't create a WPA2-Enterprise wireless connection; missing Microsoft: PEAP

Similar Messages

Maybe you are looking for