Can't create cd image with any CD

Hi,
I'm having trouble creating a CD Image in Disk Utility. I insert the CD and then open Disk Utility. I then highlight the CD drive and click on New in the menu. The problem is that the "Disc Image from Device" option is greyed out. Does someone know why this option can't be selected?
This happens with any cd
Thanks,
Roby

If you are going to burn copies of the CDs, use the "Importing" pane of iTunes' "Advanced" preference to import using AIFF or Apple Lossless Encoder, so you don't reduce the audio quality. Also check the box to use error correction.

Similar Messages

Can't create disk image with Disk Utility

I just upgraded to OS X Mountain Lion and i can no longer create disk images with Disk Utility in order to store encrypted data.
The operation fails and ends with the post :
Failed to create disk image, error:
hdiutil: create failed - Resource busy
I use three Macs with Mountain Lion, and this problem occurs only on one of the three.
I check the disk, repair permissions and did a reset of the PRAM. I even did a reinstall of Mountain Lion, without success.
But curiously, using a new user account, I was able to create a first disk image. But no one after.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

How can i create a button with a dynamic picture?

How can i create a button with a dynamic picture using
mcLoader.loadClip
I did create one with it doesnt seem to be working. It loses
all its
functions (eg onPress onRelease)
Thanks

I solved thep roblem anyway creating a mc.. then creating
another MC withing
the first MC and i change the picture on the second MC. And i
apply the
propierities to the first MC , and works
If i have troubles with mu sistem on the future I will use
yours!
Thanks!
"the fleece" <[email protected]>
escribi� en el mensaje
news:e67i88$jlf$[email protected]..
> the image loading will remove any properties or
functions the mc had.
>
> you need to apply them in the onLoadInit function
>
> mclListener.onLoadInit = function(target_mc:MovieClip) {
> target_mc.onRollOver=blah blah
> };
> var image_mcl:MovieClipLoader = new MovieClipLoader();
> image_mcl.addListener(mclListener);
> image_mcl.loadClip(blah, blahblah);
>
>

First Script: Need some basic skill help? Can you add an image with a click?

Hello, Im working on a project were you can replace people heads in a photo. Its for a project so its not supposed to be perfect. So far heres what i think the best steps to take are, but im not sure how to take the first scripting steps. How can i add an image with a script? How can i store a x y coordinates?
1. I would create four variables and than store the XY cords of the the high point of the head, the bottom of the chin, amd the farthest right and left of the face.
2. I would than add the image of the head that I would already have.
3. If the x coordinates of the top and bottom are off kilter, I would rotate new head until = old face dimensions..
4. I would also see if the width is too big or small and resize accordingly
5. I would than resize the head so that the eyes would match up.
Thanks for any help you can provide!

Is that script for a browser html. Its not for Photoshop and like Photoshop would fine UiApp undefined so does Microsoft. Is that a Chrome script or Android script? Why post it here?
Atiqur Sumon wrote:
function doGet() {
   var app = UiApp.createApplication();
   // The very first Google Doodle!
   app.add(app.createImage("http://www.google.com/logos/googleburn.jpg"));
   // Just the man in the middle
   app.add(app.createImage("http://www.google.com/logos/googleburn.jpg", 118, 0, 50, 106));
   return app;

Create an image with ActionScript

How do you create an image with ActionScript? The image is
located at an url that is not guaranteed to be on the same server.
I would prefer something that is compatible with previous
versions of the Flash player.
If you could point me to some tutorial or show me how it is
done.
Thanks

This is suuuuuuuuuuuuper basic, you just have a movieclip on
the stage and the URL of any image on the internet/local computer
function loadImage(imageUrl:String,
holder_mc:MovieClip):Void{
holder_mc.loadMovie(imageUrl);
Fill the two parameters with the 1. image url and 2.
movieclip that holds the image
It will load the image into it. Much more in depth tutorials
and stuff can be found all over the place, just google it.
Sam

How can i create excel sheet with multiple tabs using utl file?

how can i create excel sheet with multiple tabs using utl file?
any one help me?

Jaggy,
I gave you the most suitable answer on your own thread yesterday
Re: How to Generating Excel workbook with multiple worksheets

How can I create a solution with Livecycle

I work for a high school and we have about 12 pdfs that we need parents to read/scroll through, then 10 (different) pages that we want them to print, complete and return to the school. Finally, we want them to see a "Thank you, you have done all you have to do" type screen. We want to make it as user friendly as possible so I was thinking...
Reading pages, 1 at a time with next at bottom.
Click next and it takes them on. When they get to printing pages 1 print button prints all pages we need them to print. Click next, and it takes them to optional print pages.
Click next and it says, thank you.
How can I make this happen if I already have all the pdfs?
Help please.
John Dent
[email protected]

Thank you soo much. A few questions?
They weren't created in designer but could I just import all of them?
How do "build the structure" for the naviagtion?
Where/how do you add the script.
Thanks again,
John Dent
Date: Fri, 30 Jul 2010 07:01:08 -0600
From: [email protected]
To: [email protected]
Subject: How can I create a solution with Livecycle
I assume that all of these PDFs were created in Designer. If so you can add any buttons that you want to appear on every page (Next, Previous) onto the Master page then there is script you can add to the buttons to actual move the pages (xfa.host.pageDown() and xfa.host.pageUp()). The Prin button can be added to the specific page and you can pass the page numbers that you want to print as a parameter to the print command. Lastly when you get to the last page and the click Complete you can display a messageBox with your Thank you message.
Hope that helps
Paul
>

How can I create a video with effects using my ipad?

How can I create a video with effects (sepia, B&W, Negative, oval or any other shape borders) using my ipad? I would Like to keep a higher res and also be able to shrink it down to email or send in a MMS. Or should I just upload it to my PC and mess with it there? Some of the apps I have are very easy to use compared to the learning curve needed for video editing software.
Thanks

Thats the Problem . . . how many apps do I have to try until I find the one I want? I noticed a few will render the video thus losing its original size. When I went to edit it more in iMovie the video was smaller--not good. And what software do you suggest, Templeton, for the PC? I love the apps because they are easy. I dont have hours to mess around on a software to figure out if its something I want. Im looking for simplicity. Maybe Ill get more into it later. I just want to record simple video of my playing the guitar for self analysis and create a short video for family and friends.
Apps:
iMovie
CinemaFXV
VideoFix
Cartoonatic
Video illusion
VidEditor
Software:
Windows Movie maker (wont accept .mov files)
After Effects (Too little time, so much to learn)
Wondershare (Very easy but little choices)
VideoPad (Again. Few choices)

Can we create outbound delivery with reference of purchase order

Hi All,
can we create outbound delivery with reference of purchase order?

dear friend,
as far as i know you can create it with the following references:
-to sales order;
-to STO;
-to subcontract order;
-to project;
-without any ref
are you talking about stock transport order ?
regards,

Can you create an image field in the form so a respondent can upload a photo to it?

Can you create an image field in the form so a respondent can upload a photo to it?

Use the File Attachment field to allow respondents to include a photo with their submission.
Regards,
Brian

Creating an image with a Cloud Effect

Can someone please tell me how I can create an image with a
cloud effect like the photo located at the link below:
http://www.arizonamedicalclinic.com/
Thanks in advance for all of your help.

Nessa wrote:
> Can someone please tell me how I can create an image
with a cloud effect like the photo located at the link below:
>
>
http://www.arizonamedicalclinic.com/
>
> Thanks in advance for all of your help.
Draw a cloud shape. Fill it with white and add a black inner
glow.
Position the cloud shape over the photo. Press Shift and
select both the
cloud shape and the image. Choose Modify > Mask > Group
as Mask.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?
My client requirement is process 100 files from biztalk with in 5 min ,actually it is taking 20 min .
So I decided to created same instance of the application with multiple time in BTS admin console ,as I understand biztalk admin console never allow to install same
schema’s with multiple time .
Any help can be appreciate ..

BizTalk will automatically process multiple messages on separate threads so you may need to tune your system. The following link should get you started:
http://social.technet.microsoft.com/wiki/contents/articles/7801.biztalk-server-performance-tuning-optimization.aspx
Another possibility is to set the Batch Size property on your receive location if the adapter uses batch size to determine how messages are picked up. As an example, it you want the MSMQ adapter to immediately pick up messages and start
to process them, set the batch size to 1.
You may also need to distribute the processing across multiple BizTalk servers by installing BizTalk on additional servers and joining the existing BizTalk group.
David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.

Can we create inbound delivery with refernce to outbound delivery?

Dear all,
can we create inbound delivery with refernce to outbound delivery?
Regards
ahmad

Dear Ahamed
I beleive it is a stock movement between 2 different plants
If so then the receiving plant will have to do GR against the outbound delivery only
The outbound delivery of the supplying plant
The outbound delivery of the supplying plant will not become the inbound delivery of the receiving plant in SAP
But logically yes
Your second post talks about outbound delivery only and that is correct
My point is your proces doesnot involve inbound delivery at all
In STO there is no inbound delivery at all
Inbound delivery in SAP means shipping notification that means the confirmation from the vendor about the despatches
That will not have muck material details and it is just a confirmation
Meaning of inbound delivery from SCM 601 logistics execution
The goods receipt process using inbound deliveries realistically maps standard
processes in many companies. If the vendor announces the goods receipt with a
shipping notification, the inbound delivery can be created either manually or
automatically on the basis of the shipping notification. It contains information
transmitted by the vendor concerning the expected delivery times and quantities,
as well as any information about packaging. It is also the reference document for
the subsequent putaway using a transfer order. If you also use the transportation
function as part of Logistics Execution, you can summarize inbound deliveries
into inbound shipments.
Regards
Raja

How to compare any type of image with any Palette ?

How can I compare any image with any Palette file (ex. sample.pal file) ?
If that image don't satisified selected Palette file then show me exception or any kind of message.
Plz reply me with proper guidence or any hints.
Thanks
Harshal

How can I compare any image with any Palette file (ex. sample.pal file) ?
If that image don't satisified selected Palette file then show me exception or any kind of message.
Plz reply me with proper guidence or any hints.
Thanks
Harshal

How can I view all images with Safari on my mac?

how can I view all images with Safari on my mac? When I go to pinterest or any stock photo site I can only see some of the images on my mac.

Please link to an example of a page you're having problems with. It should be accessible without a login.

Can't create cd image with any CD

Similar Messages

Maybe you are looking for