Can't create connection to SAP BW in Desinger

I could connect to BW and see a lot of BW infocubes. And I created an universe based on infocube
and created the webi reports and refreshed the reports. Everything looks ok.
Now I get the error message when I tried to create a connection to BW in BO designer.
The error message is " Err DBD: [BusinessObjects115.OLAP. BrowerObject.1] : SAP "
And connect to BW in CR is still ok.
Any advise appreciated.

I checked the license. i think license for "BusinessObjects Enterprise Premium" should include Integration kit. it looks ok.
1) i can access infoview with SAP authentication , that means i can log on infoview with SAP user and password.
2) i can access BW in Crystal Report.
but now when i open the connection i created before , would like to check the objects in BW, i get error messae :
Error DBD:(BusinessObjects115.OLAPI.BrowseObject.1): SAP
I don't know what's wrong.
Edited by: zhang Connie on Oct 30, 2008 3:04 PM

Similar Messages

Can't create connection to SAP application server

I use BusinessObjects Edge Series 3.0 (testing software). In Designer I am trying to create a new universe and first to create new connection (with wizard) to SAP (BW cube). I set all parameters that I use to connect with SAP GUI, but on testing the connection I get message "The server is not responding". What is wrong?
Thanks,
Olga

I found the decision here:
Error creating connection to SAP
I installed SAP integration kit - downloaded from here:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/webcontent/uuid/806c9894-42a5-2b10-648a-d900489b76da [original link is broken]
and now I have the connection.
Olga

Can I create connection pool by oracle oci driver?

Can I create connection pool by oracle oci driver?My weblogic's version is 6.1 sp2 and oracle is 9.0.1.2.
I have some trouble with connection pool created by weblogic jDriver.
I try to read Timestamp from table and I always get the exception.It told me that ORA-00932: inconsistent datatypes.
So I created another pool by oracle thin driver and everything was right.Then I created other pool by oracle oci driver,but something were wrong. 'Could not create pool connection. The DBMS driver exception was:java.sql.SQLException: ORA-06401: NETCMN:Invalid driver designator'
The oci pool's parameters are below lines.
url: jdbc:oracle:oci:@COCO
Driver Classname: oracle.jdbc.driver.OracleDriver
Properties: user=scott;password=tiger;protocol=oci
If I get connection directly,don't use connection pool,I can get right connection.But why didn't I create pool by oci driver?Maybe weblogic7 or weblogic8 will work good?

Venkat Amirineni wrote:
Hi Joe,
I am also trying to create a connection pool using Oracle Oci XA. Weblogic
type 2 oci threads hanging on native calls and suggested to go for thin drivers.
But we want to try with Oracle Oci drivers.. Can you please tell us how to
create a conn pool using Oracle Oci.. Just the driverclass and url is enough
or need any classpath settings etc..
Thanks in advance for your quick reply.Hi. As far as driver properties, just use what Oracle says to. Any pool properties
that we recommend for XA would still apply. Note that Oracle themselves recommends
the thin driver over their OCI one:
http://download-west.oracle.com/docs/cd/B14117_01/java.101/b10979.pdf
Joe

Pairing Garmin with BT: Can't create connection: Input/output error

I'm learning how to use BT in linux. I have a Garmin and a CE device that has bluetooth capability. Both are in discovery mode.
Running "hcitool cc [macaddr]" to pair the Garmin looks promising, the Garmin receives the, well, transaction (what's this called?), and says the passkey is 1234. However, I press OK on the Garmin, and it shows a second message that the connection failed. Looking at my PC, I see this in the terminal:
Can't create connection: Input/output error
What am I doing wrong?

Check here. Also have you done a TimeMachine back up?
http://support.apple.com/kb/TS2570

How many users for remote connection can I create, from support SAP

Dear all
I have a doubt with how many users can be created in my system ERP 6.0 for the remote connection, for the error product messages on the marketplace SAP,without this counts as user license.
I have not found any notes or documents from SAP to explain this.
I appreciate your help.
Best Regards,
Erika

Ok...I will reply to myself. I can use more than 10 simultaneous connection, using vnc.

Can't create MBO from SAP servers

Hi,
I'm trying to create MBO from SAP servers with Sybase Unwired WorkSpace.
I created Connection Profile and it worked well(Ping succeeded!).
However, I expanded profile tree, no BAPI was shown.
Any ideas what is happening here?
SAP version is below,
SAP
ERP: ERP 6.0 EHP 5
NetWeaver: SAP EHP 2 for SAP NetWeaver 7.0
OS: Windows NT 2x X86_64
Sybase Unwired WorkSpace
2.1.0
Additionally, It worked well in SAP ECC 6.0.
Regards,
Hiroshi Saito

Eventually, the problem is resolved.
It related SAP Note 706195.
I did the Solution in the Note, all BAPI is displayed in Sybase Unwired WorkSpace's Enterprise Explorer.
Note 706195:
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_dwb/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373036313935%7d
thanks,
Hiroshi Saito

ABAP Proxy Generation -- Objects can be created only in SAP Package

Hi,
I am trying to generate ABAP Proxies. When i create a proxy for an interface(EMP_DETAILS_MI--outbound in my case), and assign it to package(created by developer), a pop comes up saying "Object can only be created in SAP package".
When i try to continue, it asks for an access key for that particular object.
Enter Key for the Object--R3TR-TABL-CO_EMP_DETAILS_MI When i register this object in servicemarketplace( by basis team) and get the license for this. It asks access key for another object R3TR-TABL-EMP_DETAILS_DT.
When i register this object it asks accesskey for
R3TR-TABL-EMP_DETAILS_DT_DETAILS
I fear if there is amy fault in my procedure. kindly let me know. I work on XI3.0 SP5 server.
Regards,
Siva Maranani.

Hi siva,
Iam in the same problem we want to create proxy in SAP namespace. Is there any workaround to create proxy in SAP namespace.
with Regards
shankar

Can't create connection to export model to reporting schema

Hi,
I am using version 3.1.1703. I am trying to export the table and column comments from report manager. I try to export my model to Report Schema but I can't create a connection. When I press the plus to create a connection nothing happens.
Please help.
Dean

Hi,
Just to note that the log file is normally the file datamodeler.log in the folder datamodeler\datamodeler\log (unless its location has been changed in the Preferences).
David

Can't Create Connection to one particular html page.

I have a Contribute user in my company who can edit all pages in Contribute except one particular html page. Every time she visits that one page she is prompted to. Her permissions are fine, she hass access to that html page and the folder containing that and many other html pages. She experiencies no issues with other html pages contained in that same, or any other, folder.
I have tried to edit this one page myself without any issues. I have tested it out with other Contribute users and found no issues. I even had our IT people take a look at her machine, and there was no issue.

I have a Contribute user in my company who can edit all pages in Contribute except one particular html page. Every time she visits that
one page she is prompted to 'Create Connection'. Her permissions are fine, she has access to that html page and the folder containing that and many other html pages. She experiencies no issues with other html pages contained in that same, or any other, folder. I have tried to edit this one page myself without
any issues. I have tested it out with other Contribute users and found no issues. I even had our IT people take a look at her machine, and there was
no issue.
Any suggestions?

Can't create connection pool using weblogic 6.1 with Oracle thin driver

Hi !
I have tried to create a connection pool from adminconsole. My CLASSPATH setting
is as follows :
F:\SOAP\soap-2_2\lib;F:\SOAP\soap-2_2;
D:\Oracle\Ora81\jdbc\lib\classes12.zip;
D:\Oracle\Ora81\jdbc\lib\nls_charset12.zip;
D:\Oracle\Ora81\jdbc\lib\classes111.zip;
F:\SOAP\soap-2_2\lib\jaf-1.0.1\activation.jar;
D:\Oracle\Ora8\Apache\Jsdk\src\javax\servlet\http;
D:\Oracle\Ora81\Apache\Jsdk\src\javax\servlet;
D:\Oracle\Ora81\lib;
F:\ant\jakarta-ant1.\bin;
E:\weblogic\oci\classes;
E:\weblogic\oci\classes\weblogic\xml\license;
E:\weblogic\oci\license;
E:\bea\wlserver6.1\lib;
E:\PetStoreHome\petstore1.3;
Following is the configuration.
#Oracle thin driver Method #2
weblogic.jdbc.connectionPool.thin=\
url=jdbc:oracle:thin:@test:1521:PROJECT,\
driver=oracle.jdbc.driver.OracleDriver,\
     initialCapacity=4,\
     maxCapacity=10,\
     capacityIncrement=1,\
     props=user=xxx;password=xxx;server=test
#Add a TXDataSource for the connection pool:
weblogic.jdbc.TXDataSource.weblogic.jdbc.jts.thin=thin
# Add an ACL for the connection pool:
weblogic.allow.reserve.weblogic.jdbc.connectionPool.thin=everyone
I did append the file weblogic.properties with the above config. Now when I start
the Weblogic server I get the following error :
Starting WebLogic Server ....
<Nov 29, 2001 2:24:16 PM EST> <Notice> <Management> <Loading configuration file
.\config\petstore\config.xml ...>
<Nov 29, 2001 2:24:22 PM EST> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "petstoreServer" for domain "petstore">
<Nov 29, 2001 2:24:26 PM EST> <Notice> <Management> <Starting discovery of Manag
ed Server... This feature is on by default, you may turn this off by passing -Dw
eblogic.management.discover=false>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(jdbcthin.SignOnDB) can't be creat
ed with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(jdbcthin.EstoreDB) can't be creat
ed with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(jdbcthin.InventoryDB) can't be
cr
eated with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(weblogic.jdbc.jts.thin) can't be
created with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:41 PM EST> <Notice> <Management> <Application Poller not star
ted for production server.>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After the server has booted, your browser should
automatically launch and point to the WebLogic Server
Tour running on this server. If your browser fails to
launch, point your browser to the URL
"http://burtsun:7001"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <ListenThread listening
on port 7001>
<Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <SSLListenThread listeni
ng on port 7002>
<Nov 29, 2001 2:24:42 PM EST> <Notice> <WebLogicServer> <Started WebLogic Admin
Server "petstoreServer" for domain "petstore" running in Production Mode>
Could anyone please help me ?
Thanks
..Madhuri

Madhuri wrote:
>
Hi Joe !
I didn't get what you would like to point out. Actully, I am using same config.,
but not to disclose the info. I gave you @test and username/password xxx/xxx.Ok. Now, assuming your pool looks like what I showed, the issue is probably
that there are multiple Oracle driver zips around, and your standlaone program
is using a different, newer, better one than the server. Our weblogic jar files
include a classes12.zip Oracle thin driver, but there are multiple versions of
classes12.zip, and the latest from oracle is better than the one we sealed into
our packaging. Please use jave -verbose to identify exactly which Oracle sip file
you are using in the successful case, then make sure this zip file comes before
any weblogic stuff in your weblogic server's classpath, so we'll use the same
driver. This should work. Edit the script you sue to start weblogic to verify
the classpath does end up with the oracle driver ahead of all weblogic stuff.
Joe
>
Please let me know.
Thanks
.Madhuri
Joseph Weinstein <[email protected]> wrote:
Madhuri wrote:
Hi Joe !
Here is the sample java code. Please let me know how I can test thisin weblogic
6.1.
Thanks
.MadhuriWell fine! That was easy. Your pool definition didn't have the same URL
or
user or password as this code. Try this for your pool definition:
weblogic.jdbc.connectionPool.thin=\
url=jdbc:oracle:thin:@adl-gbsdevel:1521:PROJECT,\
driver=oracle.jdbc.driver.OracleDriver,\
initialCapacity=10,\
maxCapacity=10,\
capacityIncrement=1,\
testConnsOnReserve=true,\
testTable=dual,\
props=user=mkelkar;password=mkelkar
Let me know,,,
Joe
Joseph Weinstein <[email protected]> wrote:
The key is in the log:
Could not create pool connection.
The DBMS driver exception was:
java.sql.SQLException: invalid arguments in call
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
Now we need to simplify the problem. Please make a simple 15-line
standalone
Java program like you'd find with the Oracle driver's examples, with
no
weblogic code in the picture. Just make a JDBC connection using Oracle's
driver, and show me that code. Then I can translate that into a pool
definition.
Joe
Madhuri wrote:
Hi Joe !
Thanks for your prompt reply. I tried the way you suggested but
it
still it gives
me the same error. I am attching here the weblogic.log file.
Thanks again
..Madhuri
Joseph Weinstein <[email protected]> wrote:
We'd want to see the log during booting, where the pool
is being created to see why that failed. Try a pool
definition with no blank lines, no whitespace at the
end of lines, and no server property. The thin driver
doesn't like that:
weblogic.jdbc.connectionPool.thin=\
url=jdbc:oracle:thin:@test:1521:PROJECT,\
driver=oracle.jdbc.driver.OracleDriver,\
initialCapacity=4,\
maxCapacity=10,\
capacityIncrement=1,\
props=user=xxx;password=xxx
Joe
Madhuri wrote:
Hi !
I have tried to create a connection pool from adminconsole. My
CLASSPATH
setting
is as follows :
F:\SOAP\soap-2_2\lib;F:\SOAP\soap-2_2;
D:\Oracle\Ora81\jdbc\lib\classes12.zip;
D:\Oracle\Ora81\jdbc\lib\nls_charset12.zip;
D:\Oracle\Ora81\jdbc\lib\classes111.zip;
F:\SOAP\soap-2_2\lib\jaf-1.0.1\activation.jar;
D:\Oracle\Ora8\Apache\Jsdk\src\javax\servlet\http;
D:\Oracle\Ora81\Apache\Jsdk\src\javax\servlet;
D:\Oracle\Ora81\lib;
F:\ant\jakarta-ant1.\bin;
E:\weblogic\oci\classes;
E:\weblogic\oci\classes\weblogic\xml\license;
E:\weblogic\oci\license;
E:\bea\wlserver6.1\lib;
E:\PetStoreHome\petstore1.3;
Following is the configuration.
#Oracle thin driver Method #2
weblogic.jdbc.connectionPool.thin=\
url=jdbc:oracle:thin:@test:1521:PROJECT,\
driver=oracle.jdbc.driver.OracleDriver,\
initialCapacity=4,\
maxCapacity=10,\
capacityIncrement=1,\
props=user=xxx;password=xxx;server=test
#Add a TXDataSource for the connection pool:
weblogic.jdbc.TXDataSource.weblogic.jdbc.jts.thin=thin
# Add an ACL for the connection pool:
weblogic.allow.reserve.weblogic.jdbc.connectionPool.thin=everyone
I did append the file weblogic.properties with the above config.
Now
when I start
the Weblogic server I get the following error :
Starting WebLogic Server ....
<Nov 29, 2001 2:24:16 PM EST> <Notice> <Management> <Loading
configuration
file
\config\petstore\config.xml ...>
<Nov 29, 2001 2:24:22 PM EST> <Notice> <WebLogicServer> <Starting
WebLogic
Admin
Server "petstoreServer" for domain "petstore">
<Nov 29, 2001 2:24:26 PM EST> <Notice> <Management> <Starting
discovery
of Manag
ed Server... This feature is on by default, you may turn this
off
by
passing -Dw
eblogic.management.discover=false>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
Source
creation:
weblogic.common.ResourceException: DataSource(jdbcthin.SignOnDB)
can't
be creat
ed with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
Source
creation:
weblogic.common.ResourceException: DataSource(jdbcthin.EstoreDB)
can't
be creat
ed with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
Source
creation:
weblogic.common.ResourceException: DataSource(jdbcthin.InventoryDB)can't be
cr
eated with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
Source
creation:
weblogic.common.ResourceException: DataSource(weblogic.jdbc.jts.thin)can't be
created with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:41 PM EST> <Notice> <Management> <Application
Poller
not star
ted for production server.>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After the server has booted, your browser should
automatically launch and point to the WebLogic Server
Tour running on this server. If your browser fails to
launch, point your browser to the URL
"http://burtsun:7001"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <ListenThreadlistening
on port 7001>
<Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <SSLListenThreadlisteni
ng on port 7002>
<Nov 29, 2001 2:24:42 PM EST> <Notice> <WebLogicServer> <Started
WebLogic
Admin
Server "petstoreServer" for domain "petstore" running in ProductionMode>
Could anyone please help me ?
Thanks
..Madhuri
Name: weblogic.log
weblogic.log Type: Text Document (application/x-unknown-content-type-txtfile)
Encoding: base64
Name: PrintColumns.java
PrintColumns.java Type: Visual Cafe File (application/x-unknown-content-type-VisualCafeFile.Document)
Encoding: base64

Can't create Connection to Oracle Database

Hi i'm trying to create a simple connection to my oracle database and my projects compiles, but at the "createConnection" statement an SQLException is thrown.
Well first of all my stats:
Windows XP 32 bit
Visual Studio 2005 (VC++ 8)
Oracle Database 10g Express Edition Release 10.2.0.1.0
OCCI
I have already included the "..\OCI\include" directory to my projects additional include directories, the path to the new OCCI dll's and lib's to my additional library dierctories and i have also included the "oraocci10d.lib" to my additional dependencies for the linker.
Now here is the code i'm trying to run (it's just the code of an OCCI sample modified to my preferences):
1 #include <stdlib.h>
2 #include <occi.h>
3 #include <iostream>
4 using namespace oracle::occi;
5 using namespace std;
6
7 int main () {
8     //create environment and connection
9     string user = "myUser";
10     string pw = "myPW";
11     string db = "localhost:1521/XE";
12     Environment *env = Environment::createEnvironment(Environment::DEFAULT);
13     Connection *conn = env->createConnection(user, pw, db);
14     cout << "Environment and Connection created" << endl;
15
16     //execute a SQL statement
17     Statement *stmt = conn->createStatement();
18     stmt->setSQL("INSERT into FRUITS (fruit, amt) VALUES ('apple', 10)");
19     stmt->executeUpdate();
20     conn->terminateStatement(stmt);
21
22     //terminate environment and connection
23     env->terminateConnection(conn);
24     Environment::terminateEnvironment(env);
25     cout << "Environment and Connection terminated" << endl;
26
27     return 0;
28 }
The code crashes at line 13, where i'm trying to create the connection.
Visual Studio breaks and is giving the information, that an SQLException occured.
I looked for the Error code given by the exception and it's 24960.
Well i've found some threads working around that problem, but nothing worked properly to my problem.
Can anyone help me out of my problem?
Addition: I've already debugged the code and the pointer to the environment is good, so this possible cause of the exception (Null-Pointer) is out!
Thanks for any advice!
Edited by: [email protected] on 08.06.2010 10:34

Well i've found a post at a similar thread, where somebody told to try to compile and run the project in release mode.
Incredibly it works fine, but only for release mode as i told.
The debug mode is still having the same problem...
If somebody has an idea how to solve this problem please let me know!
Thanks, olf77.

Can not create Connection pool while connect to oracle is OK!!! Please, help me!

Dear all!!
I have created a connection pool to ORACLE DB9i. But when weblogic 7 start,
it show the error:
Cannot startup connection pool "ecsPool" weblogic.common.ResourceException:
weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: Io exception: Connection
refused(DESCRIPTION=(TMP=)(VSNNUM=150999297)(ERR=12505)(ERROR_STACK=(ERROR=(
CODE=12505)(EMFI=4))))
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:222)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:335)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:361)
at
oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:442)
at oracle.jdbc.driver.OracleDriver.connect(OracleD....
I have user sqlw user/pass@connect , it works OK!
I have use thin connection of ORACLE
jdbc:oracle:thin:@host:1521:SID
driver: oracle.jdbc.driver.OracleDriver

Viet Thach wrote:
Dear all!!
I have created a connection pool to ORACLE DB9i. But when weblogic 7 start,
it show the error:
Cannot startup connection pool "ecsPool" weblogic.common.ResourceException:
weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: Io exception: Connection
refused(DESCRIPTION=(TMP=)(VSNNUM=150999297)(ERR=12505)(ERROR_STACK=(ERROR=(
CODE=12505)(EMFI=4))))
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:222)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:335)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:361)
at
oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:442)
at oracle.jdbc.driver.OracleDriver.connect(OracleD....
I have user sqlw user/pass@connect , it works OK!
I have use thin connection of ORACLE
jdbc:oracle:thin:@host:1521:SID
driver: oracle.jdbc.driver.OracleDriverHi. Show me the entry in the tnsnames.ora file that corresponds to the DBMS
you want to connect to. From that, I can show you the proper arguments
to give to Oracle's thin driver to make it work.
Joe

Can not create connection for SMS sending?

hello, everyone.
I am a beginner in mobile develepment, now is trying write an appication which can send Short Message.
The program run well on the simulators come with WTK 2.2. But when I
try it on the simulator of Series 60 MIDP SDK 2.1, I get an error.
There is the code cause the error:
msgConn = (MessageConnection) Connector.open("sms://" + address + ":20000");
The information like these:
java.io.IOException: SymbianOS error = -15 : System:
System error.
     at com.symbian.util.NativeError.checkIO(+20)
     at com.symbian.gcf.ConnectionEndPoint.checkError(+22)
     at com.symbian.gcf.ConnectionSessionBase.createConnection(+33)
     at com.symbian.gcf.ConnectionEndPoint.<init>(+76)
     at com.symbian.gcf.DatagramConnectionEndPoint.<init>(+7)
     at com.symbian.midp.io.protocol.sms.SMSClientConnectionImpl.<init>(+7)
     at com.symbian.midp.io.protocol.sms.Protocol.openConnection(+59)
     at com.symbian.gcf.ProtocolBase.openConnection(+145)
     at com.symbian.gcf.GCFConnector.open(+197)
     at javax.microedition.io.Connector.open(+7)
     at javax.microedition.io.Connector.open(+6)
     at javax.microedition.io.Connector.open(+5)
     at example.sms.SMSSender.run(+36)
Is there someone who has met with the same problem or is familiar with Series 60 MIDP 2.1 would like to give me some advice? I will appreciate this help very much.
Best Regards.

Viet Thach wrote:
Dear all!!
I have created a connection pool to ORACLE DB9i. But when weblogic 7 start,
it show the error:
Cannot startup connection pool "ecsPool" weblogic.common.ResourceException:
weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: Io exception: Connection
refused(DESCRIPTION=(TMP=)(VSNNUM=150999297)(ERR=12505)(ERROR_STACK=(ERROR=(
CODE=12505)(EMFI=4))))
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:222)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:335)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:361)
at
oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:442)
at oracle.jdbc.driver.OracleDriver.connect(OracleD....
I have user sqlw user/pass@connect , it works OK!
I have use thin connection of ORACLE
jdbc:oracle:thin:@host:1521:SID
driver: oracle.jdbc.driver.OracleDriverHi. Show me the entry in the tnsnames.ora file that corresponds to the DBMS
you want to connect to. From that, I can show you the proper arguments
to give to Oracle's thin driver to make it work.
Joe

How can I create connection from rule author using WebDAV

Dear Experts,
I am implementing Rule-Based application. While creating Rule author I am facing a problem. Under Repository tab I can find two options, 1. WebDAV 2. FileBased. I want to know what I have to specify in the URL part when I choose Repository type as "WebDAV". Or else I need to install WebDAV in my local machine. Please suggest me.
What is the WebDAV url to create rule author connection.
Thanks,
Rajesh

Hi Rajesh,
You would be following : steps of enabling the WebDAV directory which is specified in
http://download-east.oracle.com/docs/cd/B25221_03/web.1013/b15986/webdav.htm#CHDFHJGB
Then created a directory called test_repository under ~Apache/htdocs folder : http://hostname:httpport/test_repository/
Updated the moddav.conf file with below specified entry and restarted the HTTP server
<Location /test_repository>
DAV on
ForceType text/plain
</Location>
Then, from the ruleauthor you should be able to connect to the WebDAV directory http://hostname:httpport/test_repository/
Also, make sure that the Apache process can write to that WebDAV directory.
Check the Apache's error_log to see what went wrong.
Cheers
Anirudh Pucha

Can't create connection with Data Modeler 2.0.0 570

I have installed SQL Developer Data Modeler on my Windows Vista Home Premium system and am unable to create a connection to import a Data Dictionary. When I select TNS from the connection type dropdown list , I get a message below that states: 'Warning ORACLE_HOME environment variable is not set'.
This is odd, since I use SQL Developer daily on this same system with no issues. I have checked with regedit and the ORACLE_HOME environment variable is indeed set.
Any ideas?

I ran into a similar where Data Modeler was finding the TNSNAMES.ORA file for the older Oracle 8i client (which I have to keep installed because some older legacy software depends on it) rather than the 10g client. My solution was to make use of a suggestion for a simialr problem with SQL Developer and create a DOS "cmd" file in the "+<data modeler install dir>+\datamodeler" directory that sets the ORACLE_HOME environment variable to my 10g client directory and then runs "datamodeler.exe". My file is named "datamodeler.cmd" and contains the following two lines:
SET ORACLE_HOME=C:\oracle\product\10.2.0\client_1
start datamodeler.exe
HTH.
Ed. H.

Can't create connection to SAP BW in Desinger

Similar Messages

Maybe you are looking for