Can't create MBO from SAP servers

Hi,
I'm trying to create MBO from SAP servers with Sybase Unwired WorkSpace.
I created Connection Profile and it worked well(Ping succeeded!).
However, I expanded profile tree, no BAPI was shown.
Any ideas what is happening here?
SAP version is below,
SAP
ERP: ERP 6.0 EHP 5
NetWeaver: SAP EHP 2 for SAP NetWeaver 7.0
OS: Windows NT 2x X86_64
Sybase Unwired WorkSpace
2.1.0
Additionally, It worked well in SAP ECC 6.0.
Regards,
Hiroshi Saito

Eventually, the problem is resolved.
It related SAP Note 706195.
I did the Solution in the Note, all BAPI is displayed in Sybase Unwired WorkSpace's Enterprise Explorer.
Note 706195:
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_dwb/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373036313935%7d
thanks,
Hiroshi Saito

Similar Messages

Can we call bapi from SAP or ABAP How? Pls Step by step

Can we call bapi from SAP How? Pls Step by step
thank you,
Regards,
Jagrut BharatKumar Shukla

Hi,
Do you mean you want to access BAPI in ABAP report?
If yes, then YES we can call,
1.Create a report -> In pattern write your BAPI name.
2. It is like your FM , Read correspoding BAPI documentation
3. Fill required parametes.
4. Test run and if successful , final run it.
And from Outside,
You have to establish a connection and create a wrapper and access using avaialble APIs.
Reward if useful!

How can i send mails from SAP?

how can i send mails from SAP?
what are the configurations i have to do in SAP for that?
pls give me a detail reply......
if possible, pls give me the sample ABAP program for that.

recently i have worked on a similar requirement here is the sample code for that
REPORT ZDOC_AS_EMAIL_3.
*& Report ZEMAIL_ATTACH *
*& Example of sending external email via SAPCONNECT *
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: l_t_objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
*Retrieve sample data from table ekpo
PERFORM data_retrieval.
*Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
*Populate message body text
perform populate_email_message_body.
*Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                    tables it_message
                            it_attach
                        using p_email
    'Example . xls documnet attachment'
                                 'XLS'
                            'filename'
                    changing gd_error
                          gd_reciever.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
*Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
*Build data table for .xls document
FORM build_xls_data_table.
*CONSTANTS: con_cret(2) TYPE c VALUE '0D', "OK for non Unicode
*con_tab(2) TYPE c VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
*Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                       using p_email
                                            p_mtitle
                                            p_format
                                          p_filename
                                    p_attdescription
                                    p_sender_address
                                p_sender_addres_type
                                    changing p_error
                                          p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
*Fill the document data.
w_doc_data-doc_size = 1.
*Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'REPORT'.
w_doc_data-obj_descr = ld_mtitle . "mail description
w_doc_data-sensitivty = 'F'.
*Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
*Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
*Create 1st attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 0.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
**Create 1st attachment notification
*t_packing_list-transf_bin = 'X'.
*t_packing_list-head_start = 0.
*t_packing_list-head_num = 1.
*t_packing_list-body_start = 1.
*DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
*t_packing_list-doc_type = ld_format.
*t_packing_list-obj_descr = ld_attdescription.
*t_packing_list-obj_name = ld_attfilename.
*t_packing_list-doc_size = t_packing_list-body_num * 255.
*APPEND t_packing_list.
**Create 2nd attachment notification
data: x type i.
DESCRIBE TABLE t_attachment LINES X.
append lines of it_attach to t_attachment.
data: start type i,
      end type i,
      cal type i.
start = X + 1.
describe table t_attachment lines end.
cal = end - start.
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 0.
t_packing_list-head_num = 1.
t_packing_list-body_start = start.
t_packing_list-body_num = end.
*DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-obj_descr = 'Eng Change'. "ld_attdescription.
t_packing_list-doc_type = ld_format.
*t_packing_list-obj_name = 'Eng' .
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
*Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
object_header = l_t_objhead
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
*Populate zerror return code
ld_error = sy-subrc.
*Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
*Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 " WITH mode = 'INT'
"WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
*Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY

Can't create PDFs from Word due to Cambria font. Help.

I'm using win 7 32 bit office 2010 acrobat pro 9. I can't create pdfs from word because of problems with cambria. I've ttried all the fixes I can find but none worked. Any more ideas?
[thread title updated by moderator]

How are you trying to create the PDF? With AA9 you have to print to the Adobe PDF printer or use the MS plugin.
When you say you cannot create PDFs because of Cambria, what error messages are you getting and copy them here? At this point we really do not know what you are having problems with or how you are trying to create PDFs.
In the future, please provide a topic to help folks that are stepping through all of the posts. A blank topic almost led me to simply skip your post.

Java.sql.SQLException: can't create statement from closed connection

java.sql.SQLException: can't create statement from closed connection.
at com.caucho.sql.QPooledConnectionImpl.prepareStatement(QPooledConnecti onImpl.java:411)
I am getting this error with my JSP's, i am running on Resin on Win2k, and MySql as backend.
Has anyone else also faced this issue ?
Looking for someone to help me to solve this issue.
rc

Looking for someone to help me to solve this issue.Maybe you are closing the connections. You might want to verify that you are not doing that. Or if you are that that is the correct way to return the connection to the pool.
Or you could have stale connections. Some databases will time out connections if the connection is no used in a while. (This is a good thing.) But this means connection pools must do something with connections that are not used for a while. The pools usually have a configuration option(s) which allows you to set up a keep alive message which keeps the database from closing the connection.

Can't create PDFs from Acrobat or Word?

Downloaded the 8.1.4 update and now I can't create PDFs from Acrobat or Word. If I try to create a PDF from the print menu, I get a message indicating that there are no print drivers for this...any ideas?

Thanks for responding. Yep, I tried repairing it...no dice. Then I realized that I'd re-installed AA Pro 8 (having completely given up on the AA Pro 9 upgrade that crashed my system) but not the updates. So I went through and re-installed each update. Still no dice. Then I did another repair. Nope. When I try to create a PDF via the print menu, I get a "Windows cannot print due to a problem with the current printer setup." This tells me that I have driver problem. But everything else prints fine, and I'm pretty sure Acrobat doesn't have drivers. I'm stumped...

How can we delete prospects from SAP CRM

Hello All,
How can we delete prospects from SAP CRM in back ground for a list of selected BP's.
Thanks,
Raj.

Hi Raj,
You can use tx BUPA_DEL to delete the BP's you don't need anymore.
Cheers,
Heber Olivar

General users can not send emails from SAP themselves except sap_all user

Dear experts ,
General users can not send emails from T-CODE: SO00 themselves except the users
which Assigned SAP_ALL Authorization Profiles .
We hit SAPconnect trace Error : SO_OBJECT_MIME_GET Exception: 2 .
No MIME Document Received. Error Code: UNKNOWN .
How to can i solve the problem ?
Thanks a lot in advance .

Thanks for your Reply .
I had set default domain in SCOT ,and email address in su01 .
we can send email successful only SAP_ALL users .General users can not send emails from SAP themselves
Is anybody else to help me ?
Thanks a lot in advance .

Can't copy file from SAP-directory to FTP server

Hello,
I can't copy files from the SAP server to the FTP server. The file is created with OPEN DATASET and CLOSE DATASET commands and is placed in the SAP-directory S:\usr\sap\DEV\DVEBMBGS00\work.
I can see and read the file with transaction al11, so I know it's there.
But the FTP command always gives the same error:
S:\usr\sap\DEV\DVEBMBGS00\work\[FILENAME] errno 22: invalid argument
I can connect to the FTP, but the put command keeps failing. Somehow, the file in the SAP directory can't be read, it seems, even when
Any ideas?
Thanks in advance.
Dave

Ok, I found out that I have to use SAPFTPA as RFC destination type, instead of SAPFTP, otherwise the folders can't be located.
But with SAPFTPA I can't seem to connect to the FTP server. I've tested the connection with sm59 and it works, but for the FTP it doesn't work. When I use SAPFTP as destination type, it still works.
What can I do?
Thanks.

Can't create system from par in Portal 7.3

Hello experts,
lately I have insatlled the new Netweaver 7.3 Portal AS Java. Now I want to create a new system to make email-connectivity like described on help.sap.com. Following the instructions I get stuck at the point choosing new system from par. This option is not given...
Can somebody help? How can I create a connectivity to our exchange without that option? Or is there a note poitning to to this case?
Thanks in advance.
Kind regards
Lu Huynh

Hi,
In Netweaver 7.3, you have a tool called
SystemFromParConverter to achieve this requirement. Please follow the below help link for more details.
http://help.sap.com/saphelp_nwce711/helpdata/en/45/26d6a3522b4c2de10000000a1553f6/frameset.htm
PS: Please do the steps mentioned in the above help link from the EP server itself and not from your own local system. Browse the EP server folders to locate the Par file.
you have to place the par file in the EP server.
Thanks and Regards,
Sowmya K

Can't create PDF from Word file

I may be missing some functionality or that functionality may not exist.
I'm running Acrobat Pro 9.2 and MS Word 2004 (11.5) on OSX Leopard 10.5.8. I want to create a PDF from a Word file but NOT using the Print dialog. I want to either create it in Acrobat using File > Create PDF > From File or create it from within Word using the Acrobat menu/toolbar. This is so that it will end up as a tagged PDF.
However, I don't have an Acrobat menu or toolbar in Word. I thought Acrobat was supposed to have installed these into MS Office when I installed Acrobat. And when within Acrobat if I select File > Create PDF > From File and choose a Word file, I get a message "Acrobat could not open 'filename.doc' because it is either not a supported file type or because the file has been damaged". This happens for all Word files.
Looking in Acrobat > About Adobe Plug-Ins... under Convert2AdobePDF it says 'Loaded: no'.
Are these two methods of converting Word files to PDFs something that can only be done in the Windows version of Acrobat? Or is there a plug-in or update I can download to install this missing functionality?
Thanks for your help,
Mark

Keep your Office2004. But Office 2008 does have a way to create PDF's from within the word and excel Programs.
It works better than through the AdobePDF Printer, or through the Apple Print menus save as PDF. (Unless you have X.6.x Snow leopard)
One thing it gets around is a long standing Problem Acrobat has had with word and excel since Word 6.0.1.a/Excel 5.0.1a. Acrobat doesn't know how to interpert Word Page section Breaks. Chopping up a word/excel document in to multiple PDFs that have to be merged back together. MS came up with their own PDF Converter that gets around that problem.

Can't Create PDF "from file" using any MS Office files

Acrobat 8.1.1 Pro. (OS = XP), as part of the CS3 premium edition.
I can no longer get Acrobat to recognize any of the MS Office applications extensions (.doc, .ppt, etc...) for use with either Create PDF "From File" or when using the Combine Files feature to Merge or Package. The extensions are no longer even listed as an option in the dialog box, or in the Preference settings under "Convert to PDF".
FYI- I can still use the PDF Maker functionality from within the MS Office application to create a PDF.
Any Idea what could have happened, or more importantly how to fix?
***Update***
I have re-installed the Acrobat 8 application, and the problem still exists.
I'm truly puzzled.

I get this with my PC and I ran detect-repair and reinstalled. Some PDF's I can open and other's I cannot. I can send the email to a cohort and they can open fine.
"Can't create file: Right-click the folder you want to create the file in and then click Properties on the shortcut menu to check your permissions for the folder"
Any ideas would be great.
Thanks!

Can't create VM from template on iSCSI

Hello,
I'm trying to create new VM from original Oracle template "OVM_EL5U3_X86_64_PVM_4GB" on iSCSI device without a success.
Steps to reproduce:
1) /OVS is mounted as iSCSI block device
2) Original Oracle template is copied into /OVS/seed_pool/OVM_EL5U3_X86_64_PVM_4GB
3) Oracle VM Manager - Import template (no problem)
4) Oracle VM Manager - Create VM from template
Result: Files are copied into running_pool, vm.cfg is updated, new VM is visible in VM Manager but with this message:
failed: <Exception: Error updating the image.> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 471, in config_vm raise Exception("Error updating the image.")
5) Oracle VM Manager - Start new VM
Result:
Status in VM is Running
I can connect using VNC console
But the VM is constantly rebooting with these messages on the console:
Registering block device major 202
xvda: xvda1 xvda2 xvda3
xvda: p2 exceeds device capacity
xvda: p3 exceeds device capacity
Waiting for driver initialization.
xvda: rw=0, want=101530648, limit-12707414
attemp to access beyond end of device
switchroot: mount failed: No such file or directory
Kernel panic - not syncing: Attempted to kill init!
Looks like there is a problem with partition sizes within the VM image file (xvda: p2 exceeds device capacity)
I've tried to mount iSCSI formated with ocsf2 and ext3 - I'm getting the same error.
However there is no problem when I mount /OVS as NFS or local drive and repeat the steps above.
Any suggestion would be highly appreciated,
Honza

It's all sorted now.
What I've learnt: OVS/Xen hypervisor doesn't seem to handle 4kB iSCSI block sizes.
I had to change it to 512 bytes (configuration on the iSCSI storage - nothing on the Oracle VM side) and re-create all volumes.
Just in case you experience something similar.
Honza
Edited by: Honza on Jul 21, 2009 3:00 PM

Can't creat PDF from .DWG file

Using the world's most popular CAD program. Can't create a PDF from Adobe 3D. Apparently Adobe 3D wants to open the file using my AutoCAD, but thinks AutoCAD is not on my computer???

Hi SWS,
Didn't find it here, but found the answer by Googling and getting pointed to an AECBytes article from Feb '06, which had updated Revit 3D Capture settings (settings more updated than what Adobe gives you!).
It's too bad the rotation tool is so unweildy and that the walkthru isn't right there with rotation, pan & zoom (crazy - no idea why that is). I need these to work in Reader for regular people, not computer/cad savvy types. Adobe 3D seems to have just great potential, but doesn't seem ready for prime-time yet on the PDF recipient end yet. Maybe version 8 is more polished/joe-regular-user friendly (which is what it's billed as if it's for use in Reader.
Thanks again for your help.

I can't create table from another table?

Hi everyone!
I have a problem that I don't known the reason why?
I'm using Oracle version 8i and I want to create a table from another table, such as:
     CREATE TABLE a_backup as SELECT * FROM a => It's OK, table a_backup is created.
But there is only a table that I can't created like that, such as:
     CREATE TABLE b_backup AS SELECT * FROM b;
When I run over command, SQL Plus is not responding... and clients are can't access to DB or Executing forever
This is the first time I met this problem.
Can Anyone help me to resolved it?
Thanks in advance!

xi`tin wrote:
Hi everyone!
I have a problem that I don't known the reason why?
I'm using Oracle version 8i and I want to create a table from another table, such as:You realize, of course, that 8i is completely out of support .... Is your OS and hardware just as old as your rdbms software, or is it only the rdbms that your company refuses to upgrade?
     CREATE TABLE a_backup as SELECT * FROM a => It's OK, table a_backup is created.
But there is only a table that I can't created like that, such as:
     CREATE TABLE b_backup AS SELECT * FROM b;
When I run over command, SQL Plus is not responding... and clients are can't access to DB or Executing forever
This is the first time I met this problem.
Can Anyone help me to resolved it?
Thanks in advance!

Can't create MBO from SAP servers

Similar Messages

Maybe you are looking for