Can't create menu and shortcut in Win2003 when install Oracle9.2

It can't create menu and shortcut in Windows server 2003 when install Oracle9.2.
And show the error message.

Several possible reasons.
Start by describing exactly what you did, including user ids (or at least desctriptions of them) and the permission that those user ids have.
And don't forget to detail which 'Windows 2003'. There are, as far as I know, several flavours of that product and there may be patches.
95% of the effort here is to validate the assumptions - the more you tell, the fewer the assumptions.

Similar Messages

  • Can I create a keyboard shortcut to go to start and/or end of work area?

    Just as in the title....
    Can I create a keyboard shortcut to take the CTI to the beginning or end of the work area in the Timeline panel?
    Also, can I remap the keyboard shortcut (~) that maximises the current panel?
    I can't find the answers to either of these questions in the help....
    Cheers
    Mark

    Can I create a keyboard shortcut to take the CTI to the beginning or end of the work area in the Timeline panel?
    No.
    Also, can I remap the keyboard shortcut (~) that maximises the current panel?
    In CS5, it's under Application and called "Maximize or Restore Frame." In CS5.5 it's also under Application, but you have two choices: "Maximize or Restore Active Frame" and "Maximize or Restore Frame Under Cursor." The latter is how CS5 works; the former is a new addition, and will only maximize/restore whatever frame is currently outlined in yellow, e.g. active.

  • Is there (or can I create) a keyboard shortcut for the command "export"?

    is there (or can I create) a keyboard shortcut for the command "export"?

    Keyboard Shortcuts are created in the System Preferences app, Hardware section, Keyboard, Keyboard Shortcuts tab.
    Select Application Shortcuts on the left.
    Click the "+" sign on the right and in the dialog box that pops up, enter: "Export..." and your preferred key combination. Here's an example:
    Keep in mind that when you enter the name of the action in a layered menu, such as File > Export..., or Share > Export..., you are only going to enter the last menu choice, not the higher levels.
    Regards,
    Jerry

  • I keep getting the start menu and various programmes opening when I use a series of keys when working in my accounting programme, I am not using the command key and is very frustrating me, can anyone help me?

    I keep getting the start menu and various programmes opening when I use a series of keys when working in my accounting programme, I am not using the command key and is very frustrating, can anyone help me?  I am working on a Mac OS X Version 10.6.8, just need to know if I can reprogram the keys to stop this happening?

    Safari browser and menu shortcuts:
    http://docs.info.apple.com/article.html?artnum=42951
    Mac OS X keyboard shortcuts:
    http://support.apple.com/kb/HT1343
    http://docs.info.apple.com/article.html?artnum=75459
    Changing behavious of Function Keys:
    http://support.apple.com/kb/HT3399?viewlocale=en_US
    and more useful information on keyboard shortcuts here:
    http://www.myfirstmac.com/index.php/mac/articles/mastering-keyboard-shortcuts
    How to re-map individual keys:
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&item_id=ukelele

  • I have a windows computer. How can I create apps and put them on itunes?

    I have a windows computer. How can I create apps and put them on itunes?

    You can't. The iOS SDK requires Mac OS X and an Intel Mac; Windows applications can't be put on either the iOS or Mac OS X App Stores.
    (82889)

  • Can u create cluster and pooled tables in real time

    hi
        can u create cluster and pooled tables in real time.can u send data base tables name of above one.

    Hai Anil
    For creating cluster tables first u have to create table pool ...
    create a table and specify the fields and other tecnical settings and
    then Goto EXTRAS --> Change Table Category and selct the Pooled table and activate it...
    Then Create another table And specify the required fileds and also the settings and then
    Goto EXTRAS --> Change Table Category and selct the Cluaster table and in Delivery and
    Maintainence Properties mention the Pooled table that u created and activate it...
    Regards
    Sreeni

  • How can i create PR and if there is some change in the PR due to wrong calc

    Dear all,
    I wanted to know how can i create PR, and is that simple? Ok, while creating PR, when i will come to know that stock entered here is less that the actual stock that was mentioned, but due to some error, how can i change it, how is that possible?

    1981,
    You have posted this question in the wrong forum.  Such topics are covered in the MM forum
    SAP ERP - Logistics Materials Management (SAP MM)
    You can easily create a new PR in ECC using transaction ME51N
    You can easily change an existing PR in ECC using transaction ME52N.
    Best Regards,
    DB49

  • How can i create Header and items in SMART FORM

    Hi Experts,
    How can i create Header and items in SMART FORM in the below driver program.
    _Header fields_
    SELECT BUKRS BUDAT GJAHR CPUDT USNAM BLART BELNR XBLNR BLDAT WAERS KURSF
      FROM BKPF INTO CORRESPONDING FIELDS OF TABLE IT_HEAD WHERE BELNR IN S_BELNR AND BUDAT IN S_BUDAT AND GJAHR EQ S_GJAHR AND BUKRS EQ S_BUKRS AND CPUDT IN S_CPUDT AND USNAM IN S_USNAM.
    Item firlds
    SELECT BUZEI BSCHL SGTXT SHKZG KOSTL PRCTR WERKS WRBTR HKONT KUNNR ZFBDT FROM BSEG INTO CORRESPONDING FIELDS OF TABLE IT_ITEM
      FOR ALL ENTRIES IN  IT_HEAD WHERE BELNR = IT_HEAD-BELNR AND GJAHR = IT_HEAD-GJAHR AND BUKRS = IT_HEAD-BUKRS.
      LOOP AT IT_HEAD.
    MOVE-CORRESPONDING IT_HEAD TO FINAL.
        LOOP AT IT_ITEM
        WHERE BELNR = IT_HEAD-BELNR.
          MOVE-CORRESPONDING IT_ITEM TO FINAL.
    ENDLOOP.
    ENDLOOP.
    Regards,
    Sreedhar.

    for these internal tables you can pass some Identifier  for both tables.
    in header file : IT_HEAD
    IDENT   type  char10,
    BUKRS type BUKRS,
    BUDAT type BUDAT,  like
    in header file :IT_ITEM
    IDENT   type  char10,
    BUZEI type BUZEI,
    BSCHL type BSCHL,  like  in item data
    you need to fille the  IDENT value like
    IT_HEAD:
    10 -- DE01-- 10.20.2009
    20 -- CH01-- 10.20.2009
    IT_ITEM
    10 -- 1234-- KSCHL value  like all records
    10 -- 2345-- KSCHL value  like all records
    10 -- 6783-- KSCHL value  like all records
    20 -- 3452-- 1KSCHL value  like all records
    20 -- 4532-- KSCHL value  like all records
    20 -- 4535-- KSCHL value  like all records
    in smartform you need to create 2 tables.
    or create
    LOOP  with IT_HEAD
    table with IT_HEAD
    table with IT_ITEM
    and put the condition for each table in  DATA tab where condtion  like IDENT = IT_HEAD-IDENT
    in item table also INDENT = IT_ITEM-INDENT..

  • The installer can't create folder "var/folders/51/tm_411z090hj6l9r0c8lr4m000gn/T/install.374wan2oR".

    the installer can't create folder "var/folders/51/tm_411z090hj6l9r0c8lr4m000gn/T/install.374wan2oR".
    during FCS installation

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Why can't I cut and paste email addresses when sending documents?

    Why can't I cut and paste email addresses when sending files? I have to type them in each time...And it doesn't remember them for the future, as SendNow did.
    Also, it seems that the message I type in is not kept, as it was with SendNow?
    Thanks!

    Hi drlaura,
    You're correct on both counts--these features work differently Adobe Send than they do in Adobe SendNow.
    If you're sending files from Adobe Reader, you can access your local Address Book, which should make entering email addresses easier. Please see: I’m trying to send a file from Adobe Reader, but I can’t access my computer’s address book to find my contacts. Why not?
    Please let us know how it goes.
    Best,
    Sara

  • Can VMS 2.1 and LMS 2.1 be installed in same server?

    Dear all,
    May I know can VMS 2.1 and LMS 2.1 be installed in same server? If so, how about the sequence of installation? If LMS 2.1 is already installed on the server, do I need to install the VMS Common Services? Thanks
    Gary

    Hi,
    In VMS 2.1 bundle, RME and Security Monitoring Center are included. As I know, RME can receive syslog from switch/router/PIX and Security Monitoring Center can receive syslog from PIX. If I install these two applications on the same server, will there be problems about the syslog receive? Will the syslog messages mix-up? Thanks
    Gary

  • Can Photoshop Elements 13 and Premier Elements 13 be installed/configured/patched standalone for security purposes (not linked to cloud, mobile, Microsoft, Adobe, etc)?

    We have installed a trial version of Photoshop Elements and plan to do so for Premier Elements. However, for security reasons, it is of no use to us unless we can install and use it standalone (not linked to cloud, mobile, Microsoft, Adobe, etc.). Can Photoshop Elements 13 and Premier Elements 13 be installed/configured/patched standalone as described above? If so, what do we need to do regarding installation/configuration/patching to test this?  Thanks in advance.

    Hi,
    Can you please share the logs?
    You can use the Adobe  Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
    Thanks,
    Shikha

  • How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

    How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

    You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
    Product updates

  • Photographer's package - can i drop in and out of membership when required and if so is it only after an initial period has elapsed?

    photographer's package - can i drop in and out of membership when required and if so is it only after an initial period has elapsed?

    Hi there
    The Photography plan is only available as an annual plan (either pay up front or paid monthly) so you'd be signing up for a year.
    A month to month plan is available for Creative Cloud complete and single apps which means you don't have to commit for a certain period of time and can stop and start.
    Subscription terms available here: https://www.adobe.com/misc/subscription_terms.html
    Hope this helps.
    Thanks
    Bev

  • How do I get data off  my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP!

    how do I get data off  my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP! I got married last week on holidays and have not had a chance to save photos yet.

    Hello there stidhambr15,
    I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't quite get the device going again, I recommend restoring the device.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
    iPhone and iPad: How to remove the SIM card
    http://support.apple.com/kb/ht5163
    iPhone 4 (GSM model)
    iPhone 4S
    Cheers,
    Sterling

Maybe you are looking for

  • Question about calculation example with Query Designer

    Hi guys, I have to calculate within columns and rows and I am not familiar with the settings in Query Designer that could be done to achieve the results. For example: Payments---- Delay - Weighted Delay 1000USD--10 days-- 10000 2000USD--20 days-- 400

  • JTable Rendering

    Hi, Can anyone help in the following: I have implmented the JCheckBox Renderer in one of the fields of the table. It works fine but the problem is i cannot check multiple rows of data. When I check on row, the other one automatically unchecl. Here is

  • New user creation in AE- user group not getting assigned

    Hi All, Here is a typical case, wherein when we create a new user with AE for the production system, the user gets created and the roles are also assigned but the user group is not getting assigned. The user group is being fetched from a table from t

  • First Spacebar, now timeline row size... what's going on?

    Hi All I started a thread about how suddenly the spacebar began deactivated layers when choosing a layer in the Timing or Project window . Several people gave feedback, and I persisted in trying different things to fix this problem. I subsequently di

  • Can not receive email after upgrading to 5.0.1

    iPhone does not fetch the email from server automatically after upgrading  to 5.0.1 . I need to use mail APP in order to get my emails.  what are the possible fixes for this issue ?