Can't create new auxiliary track,..somebody help me
I can't create new auxiliary track in logic pro
my way is.....in mixer window .... Option>>Create new auxiliary channel strip
or I click at + in mixer window
I have only one aux track although I added aux track number...as 2 or 5 or how many i want....
It still appeared only old one of aux track.
In my previous project, I could create many aux track BUT in my present or next project I can't create it....I don't know why.
I don't know did I pressed any botton or not... and made this problem.
Please..Somebody help me plssss
Top right in the Mix-Window: Is the button labelt AUX engaged?
Similar Messages
-
I can't open my apple id , i need to verify but how ?
Source: http://support.apple.com/kb/he68
How to verify the primary email address for your Apple ID
When you first create an Apple ID (using your email address) a verification email is sent to that address. If you sign in to your Apple ID from the link in that email, the email address is verified as the primary email address for your Apple ID. You can also resend the email verification if the email address is not verified:
Sign in to My Apple ID to manage your account information.
Click Resend under Primary Email Address.
Verify your changes by following the link in the email you receive from Apple, then signing back in to your account. -
Can't create new sites in Dreamweaver CS3. Help!
I am trying to create a new site in Dreamweaver CS3 but keep
getting the following error:
"The action cannot be completed because the other program is
busy.
Choose 'Switch to' to activate the program and correct the
problem"
I have tried every documented solution on the adobe website
and other discussion forums and still cannot get past the problem.
I have restarted the IIS server on my local PC as documented
on the following adobe technote:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_16485&sliceId=2
Other things I have done:
1. I have followed all the advice in the links at the bottom
of the above page.
2. I have created a new user, logged into that and tried
creating a site with a "virgin" environment
and I still have the problem.
3. I have gone into the registry and renamed the site
configuration info in case something was corrupted.
This removed all my site configurations. No help!
4. I have turned of my firewall and restarted the IIS
server.
5. I have searched the web for anything even remotely
similar to this error and tried every tip out there.
I called Adobe and they referred me back to the technote
above, which I had already tried.
One last bit of info. I can't create new sites, but I can
edit web pages in my existing sites. However, I cannot change the
configuration of the website in the Manage Sites area (i.e. I can't
push the Edit button).
Has anyone had this problem? Any help would be appreciated. I
have hit a brick wall on this one and am trying to meet a deadline
on a new website I need to create.
If I can't find a solution quick, I will be an
ex-Dreamweaver user. That saddens me because I really like
Dreamweaver, but I have to perform on my job.And are you running Skype?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Murray *ACE*" <[email protected]> wrote
in message
news:ga4hba$bnv$[email protected]..
> What is your firewall?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "Steven A" <[email protected]> wrote in
message
> news:ga4ejo$8nb$[email protected]..
>>I have rebooted many times. Actually, I am the only
user that ever logs
>>in.
>> This is happening on my laptop. I just created
another user to see if it
>> was a
>> corruption issue with sites tied to my regular
login.
>>
>>
>>
> -
Hi Guys! I can not create new partition on my MacBook Pro. I don't what just happened on it. Before i could but these fews day i can't. When I try to create new partition it said: Partition failed. couldn't modify partition map because file system verify failed. My HHD is samsung sata 640GB.
When I went to iONE (Apple store in cambodia) they check for me and they said my HHD is no problem. So please help with this.
Thanks you so much......! any ideas please send to [email protected] or [email protected]I've just scanned my logs and I've found a lot of failed connections to teamviewer but I do not have this app installed. Can you suggest me a way to stop these connections? I found tons of messages like this:
21/10/14 14:45:31,851 com.apple.xpc.launchd[1]: (com.teamviewer.service[1428]) Service could not initialize: Unable to set current working directory. error=2, path=/Applications/TeamViewer.app/Contents/Resources: 14A389: xpcproxy + 12907 [1227][1016C726-9ACF-3A24-9C51-A279F5C6B167]: 0x2
21/10/14 14:45:31,851 com.apple.xpc.launchd[1]: (com.teamviewer.service) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
21/10/14 14:45:37,239 com.apple.xpc.launchd[1]: (com.teamviewer.teamviewer[1430]) Service could not initialize: Unable to set current working directory. error=2, path=/Applications/TeamViewer.app/Contents/MacOS: 14A389: xpcproxy + 12907 [1227][1016C726-9ACF-3A24-9C51-A279F5C6B167]: 0x2
21/10/14 14:45:37,239 com.apple.xpc.launchd[1]: (com.teamviewer.teamviewer) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
thx -
Can we create new partner types for quallity notifications in SAP system?
Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
NileshI know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM -
HT2534 how can i creat new apple id
how can i creat new apple ID for free plz helpe me out
All Apple IDs are free.
Frequently asked questions about Apple ID -
Can't create new projects in RoboHelp HTML 7
When I try to create a new projects in RoboHelp HTML 7, the
Projects Type field is blank on the New tab of hte New Project
dialog box. I just bought this product after using the trial
version for 30 days. I can open the projects I created before but
can't create new projects. Help! I need it now!OK, this problem is solved -- the problem was RoboSource
Control 3.1. I realized that I had installed RoboSource Control 3.1
during my Trial install (the option to install it is checked by
default). By re-running the Trial download (thank God I saved it) I
was able to uninstall RoboSource Control 3.1. (I could not
uninstall it using the Tech Comm Suite installer or the Add/Remove
function in the Windows Control Panel)
Then I ran the Tech Comm Suite install and reinstalled
RoboHelp 7 (without installing RoboSource Control 3.1).
Now RoboHelp 7 HTML works again. Note that only the HTML
version was screwed up -- the Word version ran OK, I just don't
need it.
Finally, I just want to say, Adobe Tech Support *SUCKS*.
After spending a half hour on my initial call on Sept. 26th, "Ken"
directed me to the Adobe Support web page and told me to enter my
problem myself -- thanks for nothing, Ken. He promised a 24 hour
turn around, which did not happen.
When I called back on Sept. 29th, I wasted another hour with
Natasha and Sam, who had me run CSClean, which wiped out my
registry entries for Acrobat and Photoshop, forcing a reinstall of
those products. Of course, that did not help me at all.
Adobe, please stop outsourcing your Tech Support to India --
those guys know nothing!
The replies to this issue on the "Customer Support Portal"
have been slow, indifferent and unhelpful. Shame on them!
I'm posting this fix to this problem on this Forum, so the
next poor slob may be able to fix their problem themselves as I
did, 'cause Tech Support sure won't help! -
anytime i boot my g4, i see some small face at the center of the screen. am new to mac. somebody help me
Degraft wrote:
after the face blink, a question mark follows
That means the computer cannot find the operating system. Either the hard drive has a physical problem or is corrupted. Do you have the computer's original system CDs or DVDs? You may need them to get through this.
Notebook computer drives are not as robust as the larger drives used in desktop computers. If your G4 can run OS9, it's pretty old, and the drive may have simply worn out. -
Updated Mac Air to Mountain Lion and now I can not create new email in Hot Mail
Updated Mac Air to Mountain Lion and now I can not create new email in Hot Mail
Greetings,
What you posted is rather vague. By doesn't work do you mean the applications don't open at all or are you getting a message stating that your product needs activation? If it's product activation then that is something that Microsoft will have to assist you with. If your problem is that the applications simply won't open you may have to uninstall and reinstall Office again. This is common on the Windows platform too. Rarely when you upgrade to a new OS Office sometimes has an issue with the upgrade and won't open correctly. I would suggest merely uninstalling and reinstalling. Nine times out of ten that helps. -
Can't create new Web Intelligence documents
Hello,
Only user Administrator can create new Web Intelligence documents on Infoview at my Installation. I 've created a new group called GROUP1. This group has Full Control acces level on folders, universes and conections like group Administrators. A user from group GROUP1 can't create new document Web Intellingence. Also, when I have joined this user to Administrators group, then this user was allowed to create a new Web Intellingence document.
Could anybody help me?
Thank you in advance,
Jaumeplease check the rights for GROUP at application level.
I thinck you are not are not grated the rights for the Group 1 for teh Webintelligence applicaton, -
Can't create new / forward / reply email on 6700 s...
I have google sync set on MFE account. It syncs well with the excising mail, calendar, contacts. But for some odd reason I can't create new mail message.
"Toimintoa ei voitu suorittaa loppuun" ( veeery vague, "Can't complete action!" I guess) says the modal dialog overlay over the recipient / subject fields. Pushing anything cancels the new message.
I have been hunting different setting for email, mfe, messages for a while but have not come up with anything that would have helped with the issue?This solved it. Don't know why. Shouldn't be like this. When I searched for it, the file appeared. Not only it it appear but my three other attempts appeared as well. All four of them are in Contacts. That's a bit wacked I think.
Thanks very much.
Wait it gets better. I went back to the email. Clicked the email address to save it. Selected Add to existing contact. Found the contact. Added it. Click Done, and the name is gone again from the Conatcts directory. Used the search function again, and it reappeared.
But there's more. Left the phone app. Came back to it and the name is gone again. Apparently every time I want this name I have to add it by searching in Spotlight, and of course it's not updating iCloud so it's never going to get back to my computer.
Message was edited by: Tom Wolsky -
My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes account without credit card?????
Why do you need to create a new account?
Just change the payment method.
http://support.apple.com/kb/ht1918 -
When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password
See
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/
which also apply to Mtn Lion and Macericks. -
Can we create new cref.exe
Hi all,
suppose if we modify the source code present in java card framework and then compile them to class files, converting these class files to JCA files , generating mask files from these JCA files, and using these mask files along with C code available to create new cref.exe
Is it possible to do the above steps.
Thanks in advance
murali920553 wrote:
can we create new LOV's using forms personalizationhttps://forums.oracle.com/forums/search.jspa?threadID=&q=personalization+AND+LOV&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Can We Create New Categories and Folders?
I hate having all of my apps piled up in the "ALL" category. Can we create new categories such as "Business Apps" or "Education" in order to stay organized? If not can we at least create folders within the existing catefories?
Solved!
Go to Solution.I read a response to a similar question yesterday on this forum. The BlackBerry tech said it is not an option right now but you can choose your favorites and have them show in the favorites section. Maybe folders will be available later. Enjoy the new tablet I know I am.
Maybe you are looking for
-
CRM 2013 - Inconsistent javascript issue crash the web client and user needs to reopen
Hello, We are using CRM 2013 on premise version and almost 600 users are using it. We have some inconsistent JavaScript issue (following is the log for same) which happens to users in a day or two. When this issue occurs user can not work in system a
-
HP CM1312MPF drivers don't work via Windows 7 but works fine via Linux dual booting
HP CM1312MPF drivers don't seem work using Windows 7 (64-bit) . Original HP drivers CD now lost. Current drivers were downloaded from HP's website. (This webpage has a number of drivers and most 64-bit ones have been tried. Prior to my Windows re-in
-
Can i connect 2 external hdd using the thunderbolt to ethernet adapter
can i connect 2 external hdd using the thunderbolt to ethernet adapter
-
I need to append details of credit memo to invoice
Hi, I have invoice and credit memo for the same sales order. I can be able to see invoice and credit memo with the help of tcode VF03. I want to append some details of main window of credit memo to invoice. Is it possible and if yes then please tel
-
Hi, Can any one please explain me about , what are the new features added in the oracle 11g golden gate release, currently im using 10g , if im migrated to 11g what are the advantages for using GG?