Can't create new site, no Spry Assets folder

I'd be very grateful if someone could help me with this please: I have tried creating a new site and when I try to define the site, I get an error message telling me the Spry assets folder is not inside the site. I have tried creating a SpryAssets folder inside my root folder and still no luck. I don't use spry widgets. I don't want to start using them. Why can't I create a root folder without them?
Additionally, when I try editing an existing site I keep getting an error message telling me that the root folder does not exist. It does exist since I can navigate to it; and when I try to redefine it I once again get the above error message regarding Spry assets!
Please Help!!

Keep the default value for the SpryAssets folder.
The folder will not be created until you start using Spry widgets

Similar Messages

  • Can't create new sites in Dreamweaver CS3.  Help!

    I am trying to create a new site in Dreamweaver CS3 but keep
    getting the following error:
    "The action cannot be completed because the other program is
    busy.
    Choose 'Switch to' to activate the program and correct the
    problem"
    I have tried every documented solution on the adobe website
    and other discussion forums and still cannot get past the problem.
    I have restarted the IIS server on my local PC as documented
    on the following adobe technote:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_16485&sliceId=2
    Other things I have done:
    1. I have followed all the advice in the links at the bottom
    of the above page.
    2. I have created a new user, logged into that and tried
    creating a site with a "virgin" environment
    and I still have the problem.
    3. I have gone into the registry and renamed the site
    configuration info in case something was corrupted.
    This removed all my site configurations. No help!
    4. I have turned of my firewall and restarted the IIS
    server.
    5. I have searched the web for anything even remotely
    similar to this error and tried every tip out there.
    I called Adobe and they referred me back to the technote
    above, which I had already tried.
    One last bit of info. I can't create new sites, but I can
    edit web pages in my existing sites. However, I cannot change the
    configuration of the website in the Manage Sites area (i.e. I can't
    push the Edit button).
    Has anyone had this problem? Any help would be appreciated. I
    have hit a brick wall on this one and am trying to meet a deadline
    on a new website I need to create.
    If I can't find a solution quick, I will be an
    ex-Dreamweaver user. That saddens me because I really like
    Dreamweaver, but I have to perform on my job.

    And are you running Skype?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Murray *ACE*" <[email protected]> wrote
    in message
    news:ga4hba$bnv$[email protected]..
    > What is your firewall?
    >
    > --
    > Murray --- ICQ 71997575
    > Adobe Community Expert
    > (If you *MUST* email me, don't LAUGH when you do so!)
    > ==================
    >
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    > ==================
    >
    >
    > "Steven A" <[email protected]> wrote in
    message
    > news:ga4ejo$8nb$[email protected]..
    >>I have rebooted many times. Actually, I am the only
    user that ever logs
    >>in.
    >> This is happening on my laptop. I just created
    another user to see if it
    >> was a
    >> corruption issue with sites tied to my regular
    login.
    >>
    >>
    >>
    >

  • Dreamweaver CS5 - Can't create new site ( SpryAssets)

    Hi guys,
    i tried starting a new site in Dreamweaver CS 5 but it's not possible because of needing a SpryAssets folder. No, i know how to create a site, but since Dreamweaver is installed on OS X Lion, i can't get it to work. I do every thing like I am supposed to do, but nothing helps. I've seen many people with that problem so there must be any help. Please dont just post links on how to create a site, i know that but my problem looks more like a bug and not like a problem because of myself.
    Sorry for my bad english,
    greetings
    Peter Zwegat2

    Hello Peter,
    hope I understood you correctly: Please let's first talk about your directory structure. I for my part use something like that:
    Now MY DW has no problems in finding my "SpryAssets" folder. Please control your pathes. In DW source code sometimes these ../ or ../../ can be helpful too.
    ... and better, please send a link to your webite in question, no matter how it looks like.
    Hans-Günter

  • Problem creating new sites. The formula refers to a column that does not exist

    Good morning,
    I have a problem creating new sites in my development environment. We have a template which works properly when we create new sites with it. However, when we add one new content type in the site created and save it as a new template, we can't create new sites
    with this template. The error log is that there are one problem in one column [The formula refers to a column that does not exist.  Check the formula for spelling mistakes or change the non-existing column to an existing column]. 
    I have opened the wsp template with visual studio but I can´t discover what column is the problem because the log only refers to the feature (ListInstances).
    Anybody knows how to find my problematic column?
    The error is:
    Feature Activation: Threw an exception, attempting to roll back.  Feature 'plantilla Llave en Mano 20141222 v2ListInstances' (ID: '6c61a3bf-3c51-4064-958b-d154729233e7').  Exception: Microsoft.SharePoint.SPException: La fórmula hace referencia a una
    columna que no existe. Compruebe que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista. ---> System.Runtime.InteropServices.COMException (0x81020057): La fórmula hace referencia a una columna que no existe. Compruebe
    que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista.     at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String bstrUrl, String bstrListName, String bstrXML)     at Microsoft.SharePoint.Library.SPRequest.UpdateField(String
    bstrUrl, String bstrListName, String bstrXML)     --- End of inner exception stack trace ---     at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionListInstances(SPFeaturePropertyCollection props, SPSite site,
    SPWeb web, Boolean fForce)     at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean
    fForce)     at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
    Thanks in advance

    Hi Enrique,
    According to your description, after added a content type into the new site and save the site as a template, there is an issue when creating another new with the newly
    site template.
    Based on the error message “The formula refers to a column that does not exist…”, seems that it would be an issue of a Calculated column in the content type you added,
    please go through all the Calculated column in that content type to see if the formulas all work well.
    Feel free to reply if there any progress.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • Help needed with creating a new site- having Spry folder issue

    I can not create a new DreamWeaver CS5 site - I get a warning message that the Spry assets folder is not inside the site & to select a valid folder in the local root directory. I've tried creating a folder to no avail, thus can not create the site. Help is appreciated.

    One option if you're a Mac: Is your hard drive named?
    http://forums.adobe.com/thread/654548
    Try also:
    http://forums.adobe.com/thread/672446

  • Can I still create new sites in iweb and publish them to mobile me?

    Can I still create new sites in iweb and publish them to mobile me? Also Can the sites not contain movies or photos, or just not a full gallery?

    You can have as many sites and domain names on a single MMe account. However, only one site can use the CNAME domain name forwarding while the others must use URL forwarding.
    Multiple Sites with Domain Name(s) in a Single MobileMe Account
    Here's how to have multiple sites in a single MMe account with one or more sites having a domain name.
    A. All sites are in the same Domain.sites2 files
    1 - only one site can use the CNAME method of domain name forwarding and it must the top site in the left hand pane of iWeb.
    Click to view full size
    2 - the other sites must use URL domain name forwarding which directs the domain name to the site's full MMe URL, http://web.me.com/MMeUsername/SiteName, or, if there is no domain name, just MobileMe's full URL.
    B. Each site is in its own Domain.sites2 file.
    Again, only one site can use CNAME forwarding. This presents a problem since CNAME forwarding directs the domain name to the basic MMe account URL: http://web.me.com/MMe_Username/ which uses an index.html file in the root folder of the account, iDisk/Web/Sites. Each time a new site is published or an existing site uses the File->Publish Entire Site a new index.html file is created in that root directory, iDisk/Web/Sites folder, directing the browser to that particular site. This file is what the CNAME method uses to find the site it represents.
    Therefore some steps must be taken to assure that the index.html file in the MMe Accounts root directory always points to the correct site. This can be accomplished is three ways.
    1 - don't use the CNAME method. Just use URL forwarding . This, IMO, is the simplest method as it doesn't requre any additional effort on the user once the domain name has been set up.
    2 - use the following method suggested by Wyodor in this topic: Is it possible to have multiple sites when using ur Domain name?
    In iWeb domainfile 1:
    Create a dummy site : _dummy
    with a blank page.
    Create your working site : Whatever
    Add pages
    Publish both Sites to the same same location on the same server.
    Your _dummy site is now the default Site.
    Check.
    In iWeb domainfile 2:
    Create/Use your CurrentSite.
    Move a page to the top of the Site and back. Publish the Site.
    iWeb will create a new index.html file in the root of the server and from now on CurrentSite is the default site.
    Check.
    From now on, never move your Whatever Site to the top of the list in the iWeb sidebar and never change the page in the _dummy site.
    Simply do not touch your _dummy ever again. And never forget that.
    3 - use Ethmoid's suggested method in Using two sites - setting one up with separate domain? or republishing the entire site that uses CNAME forwarding. Just making a minor change and publishing the site changes does not create a new index.html file.
    The entire site must be republsihing in order to get that new site.
    Or keep a copy of the CNAME site's index.html file on your Mac and replace it manually in the iDisk/Web/Sites fodler when necessary.
    NOTE: the CNAME method provides a shorter URL: http://www.DomainName.com/Site_Name/PageName. CNAME does not have masking.
    The URL forwarding displays the full MMe URL:
    http://web.me.com/MMeUsername/Domain_Name/PageName.
    With domain name masking that will be shortened to:
    http://www.Domain_Name.com for every page of your site.
    However, visitors will only be able to bookmark and enter at the first page of the site. If a page is refreshed the visitor is taken back to the first page. Also search engines will only be able to index the first page of the site.

  • When I close a site, I cannot open a new site as it says there is another page open. It takes several minites before I can open a new site.

    Hello, When I have a site open and wish to close it, the window closes but if I want to immediately open a new site, I get an error box saying that Firefox is already open. I usually takes several minutes for the close process to work properly before I can open a new site url.
    I also have been having system crashes when I am looking at video--can be news reports, video on my harddrive, or any other streaming video I may be watching. Is this due to Firefox or can you say?
    Thanks so much for your help.
    Jimmy Oakley

    I am not creating the file in Excel actually.  But it is helpful to know if the problem is during the creation of file.  Thanks

  • SharePoint 2010 - Create new site collection in existing web application with different existing content DB

    I have a SharePoint 2010 root level site collection SC1 in web application WEBAPP1. I want to create copy of that site collection in same web application WEBAPP1. Apart from Import/Export, Restore/Backup options, will following approach work? If yes , how?
    I took backup of content database of web application.
    Restored database with different name
    Mounted Content database to this WEBAPP1 by assigning new ID to DB
    Created new site collection by using this newly mounted DB
    Site collection gets created successfully but content does not appear.
    Please guide if i can achieve desired functionality by using this approach.
    If this helped you resolve your issue, please mark it Answered

    It is because the Site GUID is identical, and each GUID can only be present on the farm once. You can use Backup-SPSite/Restore-SPSite (which is full-fidelity, unlike Export-SPWeb/Import-SPWeb), which will generate a new GUID for the restore Site Collection,
    even in the same Web App.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • HT2534 My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes accou

    My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes account without credit card?????

    Why do you need to create a new account?
    Just change the payment method.
    http://support.apple.com/kb/ht1918

  • When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password

    When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password

    See
    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
    http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/
    which also apply to Mtn Lion and Macericks.

  • Can we create new partner types for quallity notifications in SAP system?

    Can we create new partner types for quallity notifications in SAP system?
    The business requirement is to limit the available entries for partners  displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
    Would appreciate help in resolving this.
    Thanks,
    Nilesh

    I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
    Then you can assign the procedure to the notification type.
    This customisation setting does not solve the problem I have.
    I'm looking for the partner type creation process which we assign to the partner function.
    Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

  • Creating new site collection using wsp template fails

    Hi all,
    I'm creating new site collections using a wsp solution generated by "save as template".
    For site collection creation I select "<Select template later>" then I upload the wsp solution.
    Everything worked until last month, now after CU installation (agoust 2014) I get an error:
    "List does not exist. The page you selected contains a list that does not exist. It may have been deleted by another user."
    Does anyone know how to solve it?
    Thanks 
    Maurizio

    ULS contains a lot of those errors:
    System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>, 
    StackTrace:
         in Microsoft.SharePoint.SPWeb.GetList(String strUrl)
         in Microsoft.SharePoint.SPWeb.TryGetListByUrl(String url)
         in Microsoft.SharePoint.SPFieldElement.PerformFixUpIfLookUpField(Guid fieldId, XmlNode xmlNodeOfAField, SPWeb web)
         in Microsoft.SharePoint.SPFieldElement.ElementActivated(SPFeaturePropertyCollection props, SPSqlCommand sqlcmdAppendOnly, SPWebApplication webApp, SPSite site, SPWeb webNull, Boolean fForce)
         in Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionFieldsAndContentTypes(SPFeaturePropertyCollection props, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean fForce)
         in Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean fForce)
         in Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
         in Microsoft.SharePoint.SPFeatureCollection.AddInternal(SPFeatureDefinition featdef, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean fMarkOnly)
         in Microsoft.SharePoint.SPFeatureCollection.AddInternalWithName(Guid featureId, Int32 compatibilityLevel, String featureName, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean
    fMarkOnly, Boolean fIgnoreMissing, SPFeatureDefinitionScope featdefScope)
         in Microsoft.SharePoint.SPFeatureManager.EnsureFeaturesActivatedCore(SPSite site, SPWeb web, String sFeatures, Boolean fMarkOnly, Boolean fIgnoreMissing)
         in Microsoft.SharePoint.SPFeatureManager.<>c__DisplayClass7.<EnsureFeaturesActivatedAtWeb>b__6()
         in Microsoft.SharePoint.SPSecurity.RunAsUser(SPUserToken userToken, Boolean bResetContext, WaitCallback code, Object param)
         in Microsoft.SharePoint.SPFeatureManager.EnsureFeaturesActivatedAtWeb(Byte[]& userToken, Guid& tranLockerId, Int32 nZone, Guid databaseid, Guid siteid, Guid webid, String sFeatures, Boolean fIgnoreMissing)
         in Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String&
    bstrWebTemplate, Int32& plWebTemplateId)
         in Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String&
    bstrWebTemplate, Int32& plWebTemplateId)
         in Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
    Int32& plWebTemplateId)
         in Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1&
    featureDependencyErrors)
         in Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors)
         in Microsoft.SharePoint.SPWeb.ApplyWebTemplate(String strWebTemplate)

  • Can we create new cref.exe

    Hi all,
    suppose if we modify the source code present in java card framework and then compile them to class files, converting these class files to JCA files , generating mask files from these JCA files, and using these mask files along with C code available to create new cref.exe
    Is it possible to do the above steps.
    Thanks in advance
    murali

    920553 wrote:
    can we create new LOV's using forms personalizationhttps://forums.oracle.com/forums/search.jspa?threadID=&q=personalization+AND+LOV&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Can We Create New Categories and Folders?

    I hate having all of my apps piled up in the "ALL" category.  Can we create new categories such as "Business Apps" or "Education" in order to stay organized? If not can we at least create folders within the existing catefories?
    Solved!
    Go to Solution.

    I read a response to a similar question yesterday on this forum. The BlackBerry tech said it is not an option right now but you can choose your favorites and have them show in the favorites section. Maybe folders will be available later. Enjoy the new tablet I know I am.

  • Can i create new CRM in 11i

    I have a question, can i create new CRM(Conflict resolution Manager) additionally in 11i EBS..?

    do we find any scripts to check about concurrent managers in EBS from back end(sqlplus )..?yes default installation give you some scripts to check about concurrent managers.
    The following SQL scripts located under $FND_TOP/sql :
    1. afimchk.sql Tells the status of the ICM and PMON method
    2. afcmstat.sql Lists active manager processes
    3. afrqrun.sql Lists all the running, waiting and terminating requests
    4. afrqwait.sql Lists requests that are constrained and waiting for the ICM to release them
    5. afrqscm.sql Prints log file name of managers that can run a given request. It can be used to check for possible errors when a request stays in pending status. It requires a request id value.
    6. afcmcreq.sql Prints the log file name of the manager that processed the request
    7. afrqstat.sql Summary of completed concurrent requests grouped by completion status and execution type. It requires number of days prior to today on which to report parameter.
    8. afimlock.sql Lists locks that the ICM is waiting to get
    9. afcmrrq.sql Lists managers that currently are running a request

Maybe you are looking for