Can't create new users after GroupWise is moved from NetWare to Linux

Hi,
I moved GroupWise (Version 6.5 SP 6, single domain and single office)
from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
GroupWise server is running oaky. Existing users are able to connect
their mail box and send and receive messages. But I can't create new
users on the GroupWise server.
I used ConsoleOne installed on the Linux server to create new GroupWise
users. It seemed that I was able to do it. The new users appear on the
NDS and the GroupWise File IDs were assigned for these users. And I was
able to add these new users to distribution lists. But the users DB
files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
server and they cannot connect to the server. Old users cannot find them
in Novell GroupWise Address book.
Does anyone how to fix the problem?
Thanks in advance!
Jinkang

Hi,
[email protected] wrote:
>
> Hi,
>
> I moved GroupWise (Version 6.5 SP 6, single domain and single office)
> from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
> GroupWise server is running oaky. Existing users are able to connect
> their mail box and send and receive messages. But I can't create new
> users on the GroupWise server.
>
> I used ConsoleOne installed on the Linux server to create new GroupWise
> users. It seemed that I was able to do it. The new users appear on the
> NDS and the GroupWise File IDs were assigned for these users. And I was
> able to add these new users to distribution lists. But the users DB
> files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
> server and they cannot connect to the server. Old users cannot find them
> in Novell GroupWise Address book.
>
> Does anyone how to fix the problem?
This clearly sounds like your domain (which is the part of groupwise
which you admin against) doesn't/can't talk to the postoffice, so the
change you made (to the domain) does never get to the PO (which is where
the addressbook of your other users come from, and is what is
responsible for creating the user DB). This seems very likely to be
caused by your move not being done properly, and old information (either
path or IP address) for the PO still being in the domain and/or domain
database.
So how's the domain linked to the PO?
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Similar Messages

Mountain Lion has created new user log-ins and moved old Users to a separate folder

Mountain Lion has created new user log-ins and moved old Users to a separate folder.
The new users are set-up as "standard" and the old ones were "Administrators"
All files are missing, i.e. no desktop files etc. But they are located in a folder called "Users 1" which is a new folder.
Can anyone help?

Here is perhaps the solution :
http://forums.macrumors.com/showthread.php?t=1191262
follow the "Ratatapa's" instructions.
1/ boot on Recovery part (command R)
2/ find "terminal" in disk utilities
and write "resetpassword" for root. Enter a new password for the root user.
3/ reboot as root user (or when your are login, log out and typing to open a other user "root")
in the "system pref" panel, open "users and groups" and then create new user with the same name, same password.. normally it must be asking you about "You are already an account with the same name" say yes. And it's done.
4/ Log out. re-log as the normal user. desactivated the root user.
about "root user", see also :
http://support.apple.com/kb/ht1528
your welcome
f

[syntax_error] in Creating New User - After applying SP ABAP & Basis lv 8

Hi Gurus.
actually I already created message to SAP regarding this. but i havent receieve any respond. I post here just in case maybe I can have immediate solution from you guys..
I have 2 system HLC and MFG
which is using same OS and DB
DB Information
DB client lib.     SQL_Server_8.00
DB releases        MSSQL 7.00.699 or higher, MSSQL 8.00.194
DBSL version       700.08
DBSL Patch Level   144
System Information
SAP versions       700
Operating System   Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Wi
OP release         5.2
which have same Kernel and SP patches
Kernel release    700
Sup.Pkg lvl.      146
SAP_ABA     700     0008     SAPKA70008
SAP_BASIS     700     0008     SAPKB70008
ST-PI 2005_1_700     0006     SAPKITLQI6
PI_BASIS     2005_1_700     0005     SAPKIPYJ75
Problem
previously both of the system HLC and MFG is in level 6 SP ABAP and BASIS
when i try to create EWA report for both of them, i have missing module in the report
and i read a note that i need to upgrade to level 8.
when i upgrade both of them to level 7, then i run sgen and there are no problem on both system
but when i upgrade both of them to level 8
in my MFG system, i can run sgen with no problem.
in my HLC system, i run sgen and it take a long time to validate the programs which are need to be recompiled. so i never run sgen to recompile on HLC system after i update the SP to level 8. but i believe this shouldnt be an issue.
the day after i update the SP, one of my user raise an issue.
(same issue is not happened in MFG system only in HLC system)
when we try to create new user..
SU01 -> create new user -> fill all the details -> save -> abap dumps
Error in the ABAP Application Program
The current ABAP program "/SAPSLL/CL_IM_BP_ADDRESS======CP" had to be
   terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/SAPSLL/SAPLBP_ADDRESS " in
   include "/SAPSLL/LBP_ADDRESSTOP " in
line 22:
"Statement "/SAPSLL/DEBUG_DATA" is not defined. Check your spelling . ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "

Hi all
problem is solved..
after doing some debugging, we found out
there are some missing entries in table TRMAC
so i just copy the missing entries from my MFG server to HLC server since they are both in same condition.
now i am wondering why do the support package miss to enter the rows in TRMAC table >.<
SAPache man..

Can't create new users in Administration Services Console

Hi,
I am following directions in the Essbase DBA guide for creating new users, as it says you must create a partition user to work with Samppart and Sampeast applications. It tells me to log on to Administration Services Console, go to the Administration Server, and right-click on users to create a new user. However, when I right-click, the option to Create New User is light grey and not clickable, neither is the option to refresh users. Can anyone tell me why I can't create a new user? I am logged in with the username: admin password: password that I set during configuration and that should be the Administrative account.

Hi,
What version are you using? If it is 9 then you need to create the user in shared services. I just checked and the option to create a user is greyed out for me too and I am an admin.
It sounds like you haven't externalised the users which is why the option to do a refresh is not there.
Thanks,
Nathan

If you can't 'Create new user account' - try this!

Over the last few days I've wasted many hours trying unsuccessfully to create a new user account so I can post to Apple Discussions. Kept going round an endless loop, back to the 'Create New User Account' form. Tried every possible solution I found through internet searches, to no avail.
The answer, for me, turned out to be simply choosing a different alias - one that nobody else was using, presumably.
Why, oh why, isn't there an error message that tells you this? It would have saved me so much time and frustration - and many other people too, I'm sure.

Welcome, finally, to Discussions - you are not the first to complain about this, if you like, you can go to app.com/feedback and register your complain there as well.

Visual Adminstrator: can not create new users

Hi,
I've got a problem with my "Sneak Preview SAP NetWeaver 04 - Full Java Edition with Web AS Java 6.40, MaxDB, and Developer Studio" (NW04 SP15) installation. Whenever I start the visual administrator I can not create a new user. All buttons excepting the Refresh Button are disabled.
If I use the web (http://..../useradmin) I can create new users.
Now I want to change Security Policies in the Visual Administrator. But the problem is the same.
Does anyone know any solution?
Best Regards,
tobi

Hi Tobias,
In VA => Security Provider there is a change button ("pencil") in the top of the right frame. You should enable other buttons by clicking this one.
Regards,
Mike

Can't create new user account....

Hi- I am trying to create a new user account so that I can see if some of the issues I am having with my G4 Mac also are issues under a different account. I have (several times) created a new account and assigned a password and also tried having no password. Either logging out or using Fast User Switching, I click on the new user icon and either type in the password (I know I have it correct since it's my default password) or not type it in if I have no password set, and click on login. That's when I get the shaking window. No matter what I do, I can't login!! I am at a loss of what to do or what could be causing this. Any help will make me a happy Mac user again! Judy
PS- After I had this problem surface, I ran Monoligual and got rid of lots of language support and I also ran Font Nuke to clean out some font caches.... but these were run after I had problems setting up a new user account. I was having issues with the new upgrade for my genealogy program, Reunion (still having issues actually-they can't figure out what's causing the problem) and I removed some "things" from Login Items. Can't tell you what they were but I have some there still. I ran Disk Warrior and iDefrag also recently. Also have repaired permissions. The other issue I had (yesterday anyway-haven't used it much today yet) is that Safari was crashing when I was accessing my public library's online catalog............. I don't know if any of these are related to my inability to create a new user account or not but thought I'd throw that into the mix.

You say a dialog comes up for you to enter a password when you don't have a password while using Fast User Switching. That should not happen.
If you set up an account without setting the password, Fast User Switching won't bring up the password dialog for that account. Instead, it will instantly switch to that account when you choose it.
Make sure there is nothing in the password field when you set up the account, or change the password and don't type anything in for either the new or verify fields. It'll ask you to confirm that you don't want a password and "Cancel" will be the default button. Choose the "Ok" button instead.
That should do it. If not, then I have no idea.

Can't create new user, Permission Errors in Console

I just purchased a new 2013 iMac with a 3TB Fusion Drive. I'm trying to dig and fing out why I'm currently unable to create and log in to another user account. I haven't manually changed any permissions in the terminal, and I've booted into recovery mode and attempted restore all Disk Permissions (my next step is to run Onyx). After creating a new user account, when attempting to log into it, the log in screen hangs and just loads endlessly. The console output is as follows:
3/8/13 9:23:00.852 PM
SecurityAgent[417]
Login Window login proceeding
3/8/13 9:23:01.010 PM
loginwindow[79]
ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
3/8/13 9:23:01.034 PM
WindowServer[110]
Session 257 retained (2 references)
3/8/13 9:23:01.034 PM
WindowServer[110]
Session 257 released (1 references)
3/8/13 9:23:01.062 PM
loginwindow[420]
Login Window Application Started
3/8/13 9:23:01.072 PM
WindowServer[110]
_CGXNewConnectionPort: Call from workspace. Updating audit session 100000 -> 100014
3/8/13 9:23:01.073 PM
loginwindow[420]
**DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
3/8/13 9:23:01.090 PM
WindowServer[110]
Created shield window 0x74 for display 0x41dc9d00
3/8/13 9:23:01.091 PM
WindowServer[110]
Display 0x41dc9d00: VirtualDisplay Unit 0; ColorProfile { 1, "Default(sRGB IEC61966-2.1)"}; TransferFormula (1.000000, 1.000000, 1.000000)
3/8/13 9:23:01.109 PM
launchctl[422]
com.apple.findmymacmessenger: Already loaded
3/8/13 9:23:01.127 PM
com.apple.SecurityServer[16]
Session 100014 created
3/8/13 9:23:01.128 PM
hidd[84]
CGSShutdownServerConnections: Detaching application from window server
3/8/13 9:23:01.128 PM
hidd[84]
CGSDisplayServerShutdown: Detaching display subsystem from window server
3/8/13 9:23:01.129 PM
WindowServer[110]
_CGXNewConnectionPort: Call from workspace. Updating audit session 100014 -> 100014
3/8/13 9:23:01.134 PM
loginwindow[420]
Login Window Started Security Agent
3/8/13 9:23:01.150 PM
airportd[424]
_doAutoJoin: Already associated to “Network Name”. Bailing on auto-join.
3/8/13 9:23:01.176 PM
SecurityAgent[431]
MacBuddy was run = 0
3/8/13 9:23:01.183 PM
SecurityAgent[431]
User info context values set for NewUserAccount
3/8/13 9:23:01.212 PM
UserEventAgent[426]
cannot find useragent 1102
3/8/13 9:23:01.372 PM
loginwindow[420]
Login Window - Returned from Security Agent
3/8/13 9:23:01.375 PM
loginwindow[420]
ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
3/8/13 9:23:01.378 PM
loginwindow[420]
USER_PROCESS: 420 console
3/8/13 9:23:01.381 PM
loginwindow[420]
Can not connect to /var/run/systemkeychaincheck.socket: Permission denied
3/8/13 9:23:01.384 PM
com.apple.launchd[1]
(com.apple.launchd.peruser.504[434]) Job failed to exec(3) for weird reason: 13
3/8/13 9:23:01.385 PM
com.apple.launchd[1]
(com.apple.launchd.peruser.504) Throttling respawn: Will start in 10 seconds
3/8/13 9:23:01.395 PM
airportd[424]
_doAutoJoin: Already associated to “Network Name”. Bailing on auto-join.
3/8/13 9:23:11.386 PM
com.apple.launchd[1]
(com.apple.launchd.peruser.504[436]) Job failed to exec(3) for weird reason: 13
3/8/13 9:23:11.386 PM
com.apple.launchd[1]
(com.apple.launchd.peruser.504) Throttling respawn: Will start in 10 seconds
3/8/13 9:23:20.987 PM
warmd[63]
[_bootcachectl_playlist_dir_for_user:2529] Assertion failed: ((*__error()) == 2): stat'ing /var/db/BootCaches/106DB82C-37AE-44CC-B0B9-6CA37911832C failed: 13 Permission denied
3/8/13 9:23:21.387 PM
com.apple.launchd[1]
(com.apple.launchd.peruser.504[438]) Job failed to exec(3) for weird reason: 13
3/8/13 9:23:21.387 PM
com.apple.launchd[1]
(com.apple.launchd.peruser.504) Throttling respawn: Will start in 10 seconds
3/8/13 9:23:31.389 PM
com.apple.launchd[1]
(com.apple.launchd.peruser.504[445]) Job failed to exec(3) for weird reason: 13
3/8/13 9:23:31.389 PM
com.apple.launchd[1]
(com.apple.launchd.peruser.504) Throttling respawn: Will start in 10 seconds
Does anyone know what's causing the issue?

Well, the possible fixes I tried ended up hosing my permissions (somehow considering they shouldn't have an I was re establishing root user permissions where they belonged). I had to boot into recovery mode and reinstall Mountain Lion (thank god that it keeps all of my files) and that pretty much corrected everything on it's own. Does anyone know of the exact reasoning for the above issue? Which file or folder it's coming from?

Problems with Creating New Users after migration to EOP

My company uses EOP only for spam email protection as we have an on premise Exchange 2010 server. The issue I am having is after I manually create a new user through the Office 365 Admin Center they do not show up as a user in the Exchange Admin Center
part of EOP. Please let me know if any additional information is needed.

Hi,
Thank you for your post here.
Please firstly double check your configuration as the follow article.
http://technet.microsoft.com/en-us/library/office-365-user-account-management.aspx
Best Regards
Quan Gu

Can't create new user accounts

I somehow lost the ability to create a new user account. I currently have two admin accounts and would like to create another account. I can go through the setup with name, password, etc but when i hit create i get the spinning loading sign and a beach ball for minutes. Finally, with me force quiting system prefs.
I've run permission and disk check and everything came back fine. Is there anything i can do?
Message was edited by: jrsz24

If installing the COMBO didn't do the trick, then start over, reinstalling SL from the install disc, and see if that fixes the issue. If so, rerun Software Update, installing everything that pops up, repeating until your software's up to date, repair permissions, and restart. If not, then I'm out of ideas and you need to contact AppleCare or take the machine into an Apple repair station.

User can't log in / Server can't create new users

I recently updated to OS X Server 10.5.5. Now one of my users can't log in. Wrong username or password the system says. I've reset the password but it doesn't help.
When creating a new user I get this error:
"The server reported the error '-14120' while trying to create the user."
How can I fix this?

Well, to move the stuff, make a New Account, log into a different admin account & get BatchMod, it's much better/easier than the Finder for recursive Permission changes...
http://www.lagentesoft.com/batchmod/index.html
Now careful with BatchMod, it's crazy powerful, but easier than Command Line.
Oh, this bad user isn't using FileVault I hope???
OK, once BatchMod is loaded, you can drag the whole bad user's folder to it's icon and set the Ownership/permissions to the new replacement user, check Apply to Enclosed items, go.
Oh, if you have room you might make a copy of that User's folder first & use the copy.
Then open the bad User's folder, Select All, drag to new replacement User's folder.

I CAN'T CREATE NEW USER!!!!

in HTMLDB v.1 I have users in "flows010600.wwv_flows_fnd_users"
now I have apex 3.1.
I create a new user with plsql statment and I see new user in Apex_Workspace_apex_users. but i can't login.
then I try to create user with "manage application express users".
when I try to login, the error is "ORA-20001: Unauthorized access (security group package variable not set)".
thanks

Please tell us your first name and put it into your handle and/or profile to help us.
I create a new user with plsql statment and I see new user in Apex_Workspace_apex_users.
Please show the PL/SQL.
but i can't login.
What does that mean? What were you trying to login to?
when I try to login, the error is "ORA-20001: Unauthorized access (security group package variable not set)".
What were you trying to login to? What page? What application?
The subject of your post says you cannot create a new user but everything you said suggests that that is not true.
Scott

Can't create new files after moving to ext drive, LR4

I moved all photos to a new ext drive (they used to be on the c drive); reformatted my desktop computer; reinstalled LR4.
Now there is no parent file under the name of the ext drive on which I can right click and "create a folder inside....". I am able to create new folders in the existing subfolders.
There is also no way to sync the drive to find a new folder I created via Windows explorer.
My filing system is by month and year so now with each passing month I am not able to set up a new file.
Help!

Can you right-click on a folder name in the Lightroom Folder Panel and select "Show Parent Folder"?
Can you import new photos directly to the desired folder in the desired location?

How can I create new user in such that its entries are stored both in profile server and ldap?

Portal only creates a user profile locally within its native ldap server. Two ways you can approach this is to either write a custom auth module that creates a user in the ldap server at the same time or handle it through replication.

Open Directory Error -14136 occurred - Can't Create New User

I am trying to create a new user account so a contract employee and I am repeatedly getting this error.
The Server Reported the Error "Open Directory Error -14136 occurred" while trying to create this user.
I've done a search for this error code and no dice. Any ideas. Is something hosed in my Directory file?
I am hoping not to have to redo the whole lot as we are on a deadline.
Any help would be appreciated.

Check out this tread, you are not alone but there doesn't seem to be a single solution...
http://discussions.info.apple.com/thread.jspa?threadID=2262981
I had this code and MY solution came from the fact that I had turned OFF DNS because I couldn't see that "I" was using it. turning it back on and ensuring that it was correctly configured solved it for me!

Can't create new users after GroupWise is moved from NetWare to Linux

Similar Messages

Maybe you are looking for