Can't Create Pools or Volumes

After a number of attempts over an extended period, I have finally succeeded in setting up a new Novell Suse Linux server with OES (SLES 11 SP3 with OES11 SP2). I did it mainly to prove that I could, having used Netware and then NOWS SBE for a time, and I still have a Maintenance / Support agreement for NOWS. As much as anything its so I can learn more about the NOWS product.
Now however, I've struck a bit of an impasse. I can log into iManager as well as Remote Manager. OES shows me that I have a SYS volume and a PUBLIC volume, and I thought I should create another volume in which I would create folders for Users, Shared Data, GroupWise etc. However, first one needs a Pool to create a volume in, and that's where I seem to be snookered. When I try to create a new Pool (in iManager), after nominating the server and a valid Pool name I'm told: "Error: Unable to find sufficient space for the request". When I set it up I did not impose any space restrictions and it appears to me that there's 219gb of free space reported. I can happily create new folders in the existing SYS or Public volumes.
Is this not what I should be capable of doing, or what am I doing wrong?
Thanks for any guidance.
Jerome

Originally Posted by zexec4
...able to install GroupWise 2014 on the SUSE side of things, but I can't connect to it from a client: but that's a question for a different forum> Thanks for those who have helped me thus far.
A quick hint would be to check if the firewall is still enabled (with "SuSEfirewall status" or YaST). If that is the case and depending on what you want, either stop and disable the firewall from starting or configure the firewall to let through the GW client ports that have been set on the POA.
If that's not it, indeed best to carry on with a new thread in the GW forums. :)
Cheers,
Willem

Similar Messages

Can't create a new volume on 6540

Hi,
CAM 6.5.0.13, 6540 with 07.10.25.10
when I try to create a new volume on 6540 it fails after step 1.1 with:
javax.servlet.ServletException: javax.servlet.jsp.JspException: org.apache.jasper.JasperException: java.lang.NullPointerException
     at org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:846)
     at org.apache.jasper.runtime.PageContextImpl.access$1100(PageContextImpl.java:71)
     at org.apache.jasper.runtime.PageContextImpl$12.run(PageContextImpl.java:766)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:764)
     at org.apache.jsp.com_005fsun_005fweb_005fui.jsp.wizard.WizardWindow_jsp._jspService(WizardWindow_jsp.java:318)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     at sun.reflect.GeneratedMethodAccessor44.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:56)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:189)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:654)
     at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:445)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:379)
     at org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:65)
     at org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:80)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:284)
     at com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:340)
     at com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:261)
     at com.sun.web.ui.view.wizard.CCWizard.handleNextButtonRequest(CCWizard.java:730)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
     at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:308)
     at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:802)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:740)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:760)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:571)
     at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:957)
     at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:615)
     at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:473)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     at sun.reflect.GeneratedMethodAccessor44.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:56)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:189)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185)
     at com.sun.management.services.session.CoreSessionManagerFilter.handleRequest(CoreSessionManagerFilter.java:649)
     at com.sun.management.services.session.CoreSessionManagerFilter.doFilter(CoreSessionManagerFilter.java:412)
     at sun.reflect.GeneratedMethodAccessor43.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:218)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:230)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:56)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:189)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:263)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:584)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
     at java.lang.Thread.run(Thread.java:619)
[...]

How are you trying to create it and what happens when you do

Create Pool/cluster

Hi,
Can we create Pool/cluster? If yes who can I create?

HI,
Procedure
In the initial screen of the ABAP Dictionary, choose Utilities Further Dictionary Objects.
A dialog box appears.
Select the object type Table pool/cluster and enter the object name. Choose .
A dialog box appears in which you must specify if it is a table pool or a table cluster.
Select the required object type and choose .
The maintenance screen for table pools/clusters appears.
The necessary entries will have been made automatically for the fields for table pools since a table pool has a fixed structure. You should not change these standard settings if you can avoid it.
The structure of a table cluster is also mostly fixed. Certain fields are therefore proposed when the table cluster is created. You can adjust this proposal to your requirements, for example by inserting further key fields. However, make sure you conform to the structure necessary for a table cluster.
Enter an explanatory text in the field Short text.
If necessary, select the activation type of the table pool/cluster with Utilities Activation type.
Create documentation about the table pool/cluster with Goto Documentation.
This documentation should describe what the table pool/cluster is used for. The documentation is also output when the table pool/cluster is printed.
Go to the maintenance screen for the technical settings by choosing Goto ® Technical settings.
In contrast to the table maintenance screen, you can only define the size category here. All other attributes of the technical settings are preset.
Activate the table pool/cluster with .

Can't create connection pool using weblogic 6.1 with Oracle thin driver

Hi !
I have tried to create a connection pool from adminconsole. My CLASSPATH setting
is as follows :
F:\SOAP\soap-2_2\lib;F:\SOAP\soap-2_2;
D:\Oracle\Ora81\jdbc\lib\classes12.zip;
D:\Oracle\Ora81\jdbc\lib\nls_charset12.zip;
D:\Oracle\Ora81\jdbc\lib\classes111.zip;
F:\SOAP\soap-2_2\lib\jaf-1.0.1\activation.jar;
D:\Oracle\Ora8\Apache\Jsdk\src\javax\servlet\http;
D:\Oracle\Ora81\Apache\Jsdk\src\javax\servlet;
D:\Oracle\Ora81\lib;
F:\ant\jakarta-ant1.\bin;
E:\weblogic\oci\classes;
E:\weblogic\oci\classes\weblogic\xml\license;
E:\weblogic\oci\license;
E:\bea\wlserver6.1\lib;
E:\PetStoreHome\petstore1.3;
Following is the configuration.
#Oracle thin driver Method #2
weblogic.jdbc.connectionPool.thin=\
url=jdbc:oracle:thin:@test:1521:PROJECT,\
driver=oracle.jdbc.driver.OracleDriver,\
     initialCapacity=4,\
     maxCapacity=10,\
     capacityIncrement=1,\
     props=user=xxx;password=xxx;server=test
#Add a TXDataSource for the connection pool:
weblogic.jdbc.TXDataSource.weblogic.jdbc.jts.thin=thin
# Add an ACL for the connection pool:
weblogic.allow.reserve.weblogic.jdbc.connectionPool.thin=everyone
I did append the file weblogic.properties with the above config. Now when I start
the Weblogic server I get the following error :
Starting WebLogic Server ....
<Nov 29, 2001 2:24:16 PM EST> <Notice> <Management> <Loading configuration file
.\config\petstore\config.xml ...>
<Nov 29, 2001 2:24:22 PM EST> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "petstoreServer" for domain "petstore">
<Nov 29, 2001 2:24:26 PM EST> <Notice> <Management> <Starting discovery of Manag
ed Server... This feature is on by default, you may turn this off by passing -Dw
eblogic.management.discover=false>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(jdbcthin.SignOnDB) can't be creat
ed with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(jdbcthin.EstoreDB) can't be creat
ed with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(jdbcthin.InventoryDB) can't be
cr
eated with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(weblogic.jdbc.jts.thin) can't be
created with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:41 PM EST> <Notice> <Management> <Application Poller not star
ted for production server.>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After the server has booted, your browser should
automatically launch and point to the WebLogic Server
Tour running on this server. If your browser fails to
launch, point your browser to the URL
"http://burtsun:7001"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <ListenThread listening
on port 7001>
<Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <SSLListenThread listeni
ng on port 7002>
<Nov 29, 2001 2:24:42 PM EST> <Notice> <WebLogicServer> <Started WebLogic Admin
Server "petstoreServer" for domain "petstore" running in Production Mode>
Could anyone please help me ?
Thanks
..Madhuri

Madhuri wrote:
>
Hi Joe !
I didn't get what you would like to point out. Actully, I am using same config.,
but not to disclose the info. I gave you @test and username/password xxx/xxx.Ok. Now, assuming your pool looks like what I showed, the issue is probably
that there are multiple Oracle driver zips around, and your standlaone program
is using a different, newer, better one than the server. Our weblogic jar files
include a classes12.zip Oracle thin driver, but there are multiple versions of
classes12.zip, and the latest from oracle is better than the one we sealed into
our packaging. Please use jave -verbose to identify exactly which Oracle sip file
you are using in the successful case, then make sure this zip file comes before
any weblogic stuff in your weblogic server's classpath, so we'll use the same
driver. This should work. Edit the script you sue to start weblogic to verify
the classpath does end up with the oracle driver ahead of all weblogic stuff.
Joe
>
Please let me know.
Thanks
.Madhuri
Joseph Weinstein <[email protected]> wrote:
Madhuri wrote:
Hi Joe !
Here is the sample java code. Please let me know how I can test thisin weblogic
6.1.
Thanks
.MadhuriWell fine! That was easy. Your pool definition didn't have the same URL
or
user or password as this code. Try this for your pool definition:
weblogic.jdbc.connectionPool.thin=\
url=jdbc:oracle:thin:@adl-gbsdevel:1521:PROJECT,\
driver=oracle.jdbc.driver.OracleDriver,\
initialCapacity=10,\
maxCapacity=10,\
capacityIncrement=1,\
testConnsOnReserve=true,\
testTable=dual,\
props=user=mkelkar;password=mkelkar
Let me know,,,
Joe
Joseph Weinstein <[email protected]> wrote:
The key is in the log:
Could not create pool connection.
The DBMS driver exception was:
java.sql.SQLException: invalid arguments in call
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
Now we need to simplify the problem. Please make a simple 15-line
standalone
Java program like you'd find with the Oracle driver's examples, with
no
weblogic code in the picture. Just make a JDBC connection using Oracle's
driver, and show me that code. Then I can translate that into a pool
definition.
Joe
Madhuri wrote:
Hi Joe !
Thanks for your prompt reply. I tried the way you suggested but
it
still it gives
me the same error. I am attching here the weblogic.log file.
Thanks again
..Madhuri
Joseph Weinstein <[email protected]> wrote:
We'd want to see the log during booting, where the pool
is being created to see why that failed. Try a pool
definition with no blank lines, no whitespace at the
end of lines, and no server property. The thin driver
doesn't like that:
weblogic.jdbc.connectionPool.thin=\
url=jdbc:oracle:thin:@test:1521:PROJECT,\
driver=oracle.jdbc.driver.OracleDriver,\
initialCapacity=4,\
maxCapacity=10,\
capacityIncrement=1,\
props=user=xxx;password=xxx
Joe
Madhuri wrote:
Hi !
I have tried to create a connection pool from adminconsole. My
CLASSPATH
setting
is as follows :
F:\SOAP\soap-2_2\lib;F:\SOAP\soap-2_2;
D:\Oracle\Ora81\jdbc\lib\classes12.zip;
D:\Oracle\Ora81\jdbc\lib\nls_charset12.zip;
D:\Oracle\Ora81\jdbc\lib\classes111.zip;
F:\SOAP\soap-2_2\lib\jaf-1.0.1\activation.jar;
D:\Oracle\Ora8\Apache\Jsdk\src\javax\servlet\http;
D:\Oracle\Ora81\Apache\Jsdk\src\javax\servlet;
D:\Oracle\Ora81\lib;
F:\ant\jakarta-ant1.\bin;
E:\weblogic\oci\classes;
E:\weblogic\oci\classes\weblogic\xml\license;
E:\weblogic\oci\license;
E:\bea\wlserver6.1\lib;
E:\PetStoreHome\petstore1.3;
Following is the configuration.
#Oracle thin driver Method #2
weblogic.jdbc.connectionPool.thin=\
url=jdbc:oracle:thin:@test:1521:PROJECT,\
driver=oracle.jdbc.driver.OracleDriver,\
initialCapacity=4,\
maxCapacity=10,\
capacityIncrement=1,\
props=user=xxx;password=xxx;server=test
#Add a TXDataSource for the connection pool:
weblogic.jdbc.TXDataSource.weblogic.jdbc.jts.thin=thin
# Add an ACL for the connection pool:
weblogic.allow.reserve.weblogic.jdbc.connectionPool.thin=everyone
I did append the file weblogic.properties with the above config.
Now
when I start
the Weblogic server I get the following error :
Starting WebLogic Server ....
<Nov 29, 2001 2:24:16 PM EST> <Notice> <Management> <Loading
configuration
file
\config\petstore\config.xml ...>
<Nov 29, 2001 2:24:22 PM EST> <Notice> <WebLogicServer> <Starting
WebLogic
Admin
Server "petstoreServer" for domain "petstore">
<Nov 29, 2001 2:24:26 PM EST> <Notice> <Management> <Starting
discovery
of Manag
ed Server... This feature is on by default, you may turn this
off
by
passing -Dw
eblogic.management.discover=false>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
Source
creation:
weblogic.common.ResourceException: DataSource(jdbcthin.SignOnDB)
can't
be creat
ed with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
Source
creation:
weblogic.common.ResourceException: DataSource(jdbcthin.EstoreDB)
can't
be creat
ed with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
Source
creation:
weblogic.common.ResourceException: DataSource(jdbcthin.InventoryDB)can't be
cr
eated with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
Source
creation:
weblogic.common.ResourceException: DataSource(weblogic.jdbc.jts.thin)can't be
created with non-existent Pool (connection or multi) (thin)>
<Nov 29, 2001 2:24:41 PM EST> <Notice> <Management> <Application
Poller
not star
ted for production server.>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After the server has booted, your browser should
automatically launch and point to the WebLogic Server
Tour running on this server. If your browser fails to
launch, point your browser to the URL
"http://burtsun:7001"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <ListenThreadlistening
on port 7001>
<Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <SSLListenThreadlisteni
ng on port 7002>
<Nov 29, 2001 2:24:42 PM EST> <Notice> <WebLogicServer> <Started
WebLogic
Admin
Server "petstoreServer" for domain "petstore" running in ProductionMode>
Could anyone please help me ?
Thanks
..Madhuri
Name: weblogic.log
weblogic.log Type: Text Document (application/x-unknown-content-type-txtfile)
Encoding: base64
Name: PrintColumns.java
PrintColumns.java Type: Visual Cafe File (application/x-unknown-content-type-VisualCafeFile.Document)
Encoding: base64

Mac OS 10.5.6 Can't update CS3 I created a Specific Volume to Adobe

Hi, anyone can help me?
I created a specific Volume for Adobe software, and then installed CS3. But, the thing is that when I tried to run the updates, but seems impossible to adobe updater to see that I've installed CS3 on another volume. Can I fix this or I have to uninstall CS3 and then install again on the main volume?
Thanks

Ricardo,
Don't create a special folder or volume. Don't move the folders. Don't rename the folders. Let Adobe install install its software at its defaults. If you must have the software in a different location, create and use aliases instead. Or put your Adobe apps in the Dock. That is the probably the most reliable way to install, update and manage Adobe apps.
Neil

Can we create secondary indexes in pooled and cluster table?

hello all
can we create secondary indexes in pooled and cluster table?

Hi,
Yes, you can.
Refer the below links
[http://www.sap-img.com/abap/the-different-types-of-sap-tables.htm|http://www.sap-img.com/abap/the-different-types-of-sap-tables.htm]
[http://help.sap.com/saphelp_40b/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm|http://help.sap.com/saphelp_40b/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm]
Regards,
SB

Can not create or modify DHCP pool in UC560

I can't create new or modify existing DHCP pool inside our UC560 by using CCA 3.2.3 version: Configurate->Routing->DHCP server. I always get error "invalid DHCP pool range. The default gateway IP address 192.168.2.1 must be within the range of the address excluded from the DHCP pool."
I check my DHCP exclude tab: I already have start IP: 192.168.2.1 and End IP 192.168.2.10.
I would like to know solution to modify my current DHCP pool or I can add new DHCP pool by using CCA. If I have to use CLI, please let me know how to do it.
Thanks
Jacques

Something with my configuration that CCA can't modify it.. It have to go through CLI
Thanks,
Jacque

Can not create Connection pool while connect to oracle is OK!!! Please, help me!

Dear all!!
I have created a connection pool to ORACLE DB9i. But when weblogic 7 start,
it show the error:
Cannot startup connection pool "ecsPool" weblogic.common.ResourceException:
weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: Io exception: Connection
refused(DESCRIPTION=(TMP=)(VSNNUM=150999297)(ERR=12505)(ERROR_STACK=(ERROR=(
CODE=12505)(EMFI=4))))
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:222)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:335)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:361)
at
oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:442)
at oracle.jdbc.driver.OracleDriver.connect(OracleD....
I have user sqlw user/pass@connect , it works OK!
I have use thin connection of ORACLE
jdbc:oracle:thin:@host:1521:SID
driver: oracle.jdbc.driver.OracleDriver

Viet Thach wrote:
Dear all!!
I have created a connection pool to ORACLE DB9i. But when weblogic 7 start,
it show the error:
Cannot startup connection pool "ecsPool" weblogic.common.ResourceException:
weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: Io exception: Connection
refused(DESCRIPTION=(TMP=)(VSNNUM=150999297)(ERR=12505)(ERROR_STACK=(ERROR=(
CODE=12505)(EMFI=4))))
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:222)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:335)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:361)
at
oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:442)
at oracle.jdbc.driver.OracleDriver.connect(OracleD....
I have user sqlw user/pass@connect , it works OK!
I have use thin connection of ORACLE
jdbc:oracle:thin:@host:1521:SID
driver: oracle.jdbc.driver.OracleDriverHi. Show me the entry in the tnsnames.ora file that corresponds to the DBMS
you want to connect to. From that, I can show you the proper arguments
to give to Oracle's thin driver to make it work.
Joe

Can I create connection pool by oracle oci driver?

Can I create connection pool by oracle oci driver?My weblogic's version is 6.1 sp2 and oracle is 9.0.1.2.
I have some trouble with connection pool created by weblogic jDriver.
I try to read Timestamp from table and I always get the exception.It told me that ORA-00932: inconsistent datatypes.
So I created another pool by oracle thin driver and everything was right.Then I created other pool by oracle oci driver,but something were wrong. 'Could not create pool connection. The DBMS driver exception was:java.sql.SQLException: ORA-06401: NETCMN:Invalid driver designator'
The oci pool's parameters are below lines.
url: jdbc:oracle:oci:@COCO
Driver Classname: oracle.jdbc.driver.OracleDriver
Properties: user=scott;password=tiger;protocol=oci
If I get connection directly,don't use connection pool,I can get right connection.But why didn't I create pool by oci driver?Maybe weblogic7 or weblogic8 will work good?

Venkat Amirineni wrote:
Hi Joe,
I am also trying to create a connection pool using Oracle Oci XA. Weblogic
type 2 oci threads hanging on native calls and suggested to go for thin drivers.
But we want to try with Oracle Oci drivers.. Can you please tell us how to
create a conn pool using Oracle Oci.. Just the driverclass and url is enough
or need any classpath settings etc..
Thanks in advance for your quick reply.Hi. As far as driver properties, just use what Oracle says to. Any pool properties
that we recommend for XA would still apply. Note that Oracle themselves recommends
the thin driver over their OCI one:
http://download-west.oracle.com/docs/cd/B14117_01/java.101/b10979.pdf
Joe

Can u create cluster and pooled tables in real time

hi
can u create cluster and pooled tables in real time.can u send data base tables name of above one.

Hai Anil
For creating cluster tables first u have to create table pool ...
create a table and specify the fields and other tecnical settings and
then Goto EXTRAS --> Change Table Category and selct the Pooled table and activate it...
Then Create another table And specify the required fileds and also the settings and then
Goto EXTRAS --> Change Table Category and selct the Cluaster table and in Delivery and
Maintainence Properties mention the Pooled table that u created and activate it...
Regards
Sreeni

Can't create fresh volume on internal drive for reinstall

Daughter's MacBook Pro (Snow Leopard) was initially believed to be damaged by corrupt Library files, particularly iTunes. A clean install would run fine until iTunes was introduced, leading to instability and finally no boot. But not the issue now (I have a good system and data backup, without iTunes, on an external drive.)
The current problem started when, as part of the reinstall, I did an erase of the hard drive, not the volume.
Now, from the Install DVD, can't create a volume on or format the internal drive.
Using Linux Live CDs, I have been able to format a volume on the drive as FAT32. Verify suggests Repair on this, Repair failed.
In detail:
drive selected -- verify disk -- needs to be rpeaired
drive selected -- repair disk -- can't repair this disk
drive selected -- erase disk -- format as mac os ext journ, zero out -- erase failed, posix input/output error
now startup with resetting PRM, able to create Mac HD volume, appears like success, but not there on reboot.
Round and round endlessly.
Any ideas on how to get this drive with a working, formatted volume, ready for a fresh install?

I''m going to run through this again.
Linc Davis, I did reset the PRAM/NVRAM but may not have waited for three chimes.
When I erase an existing partition, am I not creating a new GUID partition table? If not, how do I do that?
Also, I am concerned about -- A Mac OS X installation can be recovered on 'Mac HD'.
I'll hope to not see that.
Lets go.
Command Option P R held down, four chimes
Oops, Linux disk still in.
How do I get this disk out without support for the eject key? Hold down the trackpad while powering up. That's good to know.
Another PRAM/NVRAM reset. (I know.)
Removing the three linux partiions. os3, os2, error on os1. Erased the second time of asking.
Create new OS X partition, Mac HD.
Erase that volume with writing zeros.
This will take a while.

Can't create connection pools on Solaris

Any ideas why this is happening?
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: System.loadLibrary(weblogicoci37) threw java.lang.Unsatis
fiedLinkError: /prod/appl/weblogic/6.1.1.0/lib/solaris/oci817_8/libweblogicoci37
.so: ld.so.1: /prod/appl/java/jdk1.3.1/bin/../bin/sparc/native_threads/java: fat
al: libclntsh.so.8.0: open failed: No such file or directory
at weblogic.jdbc.oci.Driver.loadLibraryIfNeeded(Driver.java:226)
at weblogic.jdbc.oci.Driver.connect(Driver.java:76)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:192)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)

It worked like a charm. Thank you very much.
Deepak Vohra <[email protected]> wrote:
Include /wlserver6.1/lib/solaris/libweblogicoci37.so & ORACLE_HOME/ora81/lib
in solaris environmental variable LD_LIBRARY_PATH.
shane yan wrote:
Any ideas why this is happening?
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: System.loadLibrary(weblogicoci37) threw java.lang.Unsatis
fiedLinkError: /prod/appl/weblogic/6.1.1.0/lib/solaris/oci817_8/libweblogicoci37
so: ld.so.1: /prod/appl/java/jdk1.3.1/bin/../bin/sparc/native_threads/java:fat
al: libclntsh.so.8.0: open failed: No such file or directory
at weblogic.jdbc.oci.Driver.loadLibraryIfNeeded(Driver.java:226)
at weblogic.jdbc.oci.Driver.connect(Driver.java:76)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:192)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)

Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

Hi,
thanks for your answer.
The Size of all disks is: 6 x 4 TB.
In the Pool are 5 x 4 TB plus 1 x Hot Spare.
It comes up to about 14,6 TB of Data formatable.
But tried it also with just 3 x 4 TB to see if it works.
I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine.
Here the results of my tests:
1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity.
new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only.
I added a screenshot:
Here you see my storage pool, and I added 3 virtual disk.
1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do.
About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD.
This is what properties shows on this volume. Always RAW.
I also tried Software Raid5 within the server.
This also worked fine. So really only parity.
Thanks
Patrick

Removing cluster node what happens to the created pools from thatnode

Hi all,
Reading through the documentation I stumble on:
10.2 Considerations for Working with Shared NSS Pools and Volumes in
the Cluster
To create or modify volumes, home directories, Distributed File
Services junctions, or any other elements that are managed using
eDirectory objects, you must cluster migrate the pool resource back to
the node where it was created before you perform those management tasks.
What does this mean when I removed the node from the cluster? Can I no
longer manage the resource??
regards
KB

I have researched the issue with testing and have an update for you.
There were at least three bugs filed in the past where this problem was reported:
- Bug 77248 - Split/Move / NW65SP3 FCS / NCS - Vol Split only works when the target volume is on the original serv
- Bug 413213 - after migrated NSS pool, getting error when creating volume on that pool
- Bug 444644 - OES2 SP1 BUILD GMC3: Not able to create the user home directory on the cluster enabled volume
What I have learned from working with testing is that the problem occurs only if the server, pool, volume, and cluster objects are in different contexts. The recommended configuration is that they be in the same context, which is why most admins never see the problem. If the objects are in different contexts, eDirectory might not be able to find the information needed to perform the operation and you get an eDirectory error. Whether or not you might run in to this issue depends on how you have set up a cluster and whether you attempt to modify or perform management actions on the pool or volume later that involve an eDirectory object in a different context.
In light of this new information, I am updating the Novell Cluster Services Administration Guide with the following statement. This guide will be re-published the week of August 2, 2010.
10.2 Considerations for Working with Shared NSS Pools and Volumes in the Cluster
http://www.novell.com/documentation/...a/bffygy4.html
The Server, Pool, Volume, Cluster Resource, and Cluster objects should all be all in the same context.
If the objects are in different contexts, you might receive an eDirectory error when you attempt to modify the pool, create or modify the volumes, home directories, Distributed File Services junctions, or any other elements that are managed using eDirectory objects. To resolve the problem, you must cluster migrate the pool cluster resource back to the node where the pool was created in order to perform those management tasks.

Can not create the connection in the enrironment!!

hello,every one:
please see the following code:
          Environment *env = Environment::createEnvironment(Environment::OBJECT);
          Connection *conn = env->createConnection(userName,password,connectString);
try
//use the conn
          catch (SQLException &ex)
               env->terminateConnection(conn);
               Environment::terminateEnvironment(env);
               throw;//re-throw
          env->terminateConnection(conn);
          Environment::terminateEnvironment(env);
          Environment *ev = Environment::createEnvironment(Environment::OBJECT);
//the program stopped here,display i can not create the new connection
          Connection *cn = ev->createConnection(userName,password,connectString);
          ev->terminateConnection(cn);
          Environment::terminateEnvironment(ev);
I have terminated the connection and the environment,then why I can not create the
connection in the new environment?
I have tried several times,if you connect the same database as the former,then it
does not work,but if you connect a new database ,it can create the new connection!
plus:I don't want to use conection pool .
Can I have some method to solve the problem?
Please help me!
Thanks a lot in advance!
tony from China

Hi Tony,
This similar sample works perfectly fine for me. Can you
retry with this?
#include <iostream>
#include <occi.h>
using namespace std;
using namespace oracle::occi;
int main()
        Environment *env = Environment::createEnvironment(Environment::OBJECT);
        Connection *conn = env->createConnection("scott","tiger","inst1");
        try
        //use the conn
        catch (SQLException &ex)
                env->terminateConnection(conn);
                Environment::terminateEnvironment(env);
                cout<<ex.getMessage();
        env->terminateConnection(conn);
        Environment::terminateEnvironment(env);
        Connection *cn;
        Environment *ev;
        try{
        ev = Environment::createEnvironment(Environment::OBJECT);
        cn = ev->createConnection("scott","tiger","inst1");
        catch (SQLException &ex)
                ev->terminateConnection(cn);
                Environment::terminateEnvironment(ev);
                cout<<ex.getMessage();
        ev->terminateConnection(cn);
        Environment::terminateEnvironment(ev);
}Rgds
Amogh

Can't Create Pools or Volumes

Similar Messages

Maybe you are looking for