Can't create raid array in 10.4.6

I am trying to create a mirrored raid array with two Fantom USB 2 external harddrives using disk utility.
I am unable to drag the image of any hard drive into the right window and the create button is never activated.
I have restarted, verified the disks and so on. I hve tried to select a different external disk but that won't work either.
Any ideas what's up.

You can try updating the drivers from the makers site, but it could be that Apple won't allow USB drives to RAIDed.
Unless your recording ET or something where a hard drive failure could mean disaster, mirrors are not ideal form of backup.
Consider auto-cloning and auto-backup software like DeJaVu or Retrospect.
What this will do is give you the benefit of time, cloning will "clone" a whole boot drive and make it bootable in case you need it. (You can clone a whole non-boot drive as well.) Auto-backup will copy user type files and folders, but it's not designed to copy a OS from one drive to another.
http://www.apple.com/downloads/macosx/systemdiskutilities/dejavu.html

Similar Messages

Is it possible to/how can I create an array of arrays in Labview 6i?

I am trying to create a data structure based on a tree where each limb is an array of arrays and each of those arrays is an array of arrays...etc. My ultimate purpose of this is for multidimensional (infinite) data saving/data recovery.

I suspect it won't work for your intended application, but here is an answer to your question:
You can't create an array of arrays, because that would be the same as increasing the number of dimensions of the array. However, you can store an array in a cluster, then have an array of clusters with arrays in them. So, indirectly it is possible. This gives you the possibility of each array being a different size.
Bruce
Bruce Ammons
Ammons Engineering

How can I create a array with all files from a directory

How can I create a array of files or varchar with all files from a directory?

I thought the example could be improved upon. I've posted a solution on my blog that doesn't require writing the directory list to a table. It simply returns it as a nested table of files as a SQL datatype. You can find it here:
http://maclochlainn.wordpress.com/2008/06/05/how-you-can-read-an-external-directory-list-from-sql/

M4000 lsi 1064 can not create raid

Got an M4000.
prtdiag shows LSI-1064 controller.
00 PCI 0 2, 50, 1000 5, 1, 0 okay --, 133 scsi-pci1000,50 LSI,1064
/pci@0,600000/pci@0/pci@8/pci@0/scsi@1
# raidctl -S
0 "LSI_1064"
0.0.0 GOOD
0.1.0 GOOD
# raidctl -c c0t0d0 c0t1d0
Creating RAID volume will destroy all data on spare space of member disks, proceed (yes/no)? yes
Operation not support with volume of this level.
also can not create raid 1 from OBP.
also raid 1 deffined on a T2000 (an LSI-1064E controller) machine is not recognized by the M4000.
[M4000/M5000 Servers Product Notes|http://dlc.sun.com/pdf/820-7235-10/820-7235-10.pdf] says nothing about it except for a bug (6723202) regarding the M3000 machine.
Any Idea ?

There is no official document available which says why H/w RAID functionality is not there on Mx000 class machines.
None of the Mx000 offical document talks about the RAID functionality on these platfomrs which probably means that Sun is not supporting H/W RAID on these platform.
If you have any of these machines (Mx000 class) under a valid sun contract, you can open a ticket with Sun and verify this.

How can I create RAID 1 on Mac mini server just now from box.

I bought my Mac mini server two days ago and decided that 1Tb + 1Tb HDD are very good for RAID 1 (mirroring).
Thinking - doing ... Open Disk Utility, try to change and create RAID. Nothing. Try to reinstall OS X - recovery part are on disk all time.
Does anybody can help me to create what I want and how to do this with minimum energy. Thanks a lot.

Start from an Internet Recovery which boots you into it's own Recovery Partition. From there use Disk Utility to put your 2 drives into RAID 1. Reinstall OS X from the Internet Recovery once you have done that and install everything else as you need to.
Be aware that RAID volumes do not have their own Recovery Partition so you will need to either have an external drive with an RP to boot into else you will need to use Internet Recovery each time (which is around a 650MB download).

Can I create "variable array"?

Is it possible to create an array of variables? Eg. if I have to 10 boolean control, called Switch1, Switch2... Switch10, and I need to switch one of them to ON, but which one to switch on depends on different situation. Say, at situation A, I need to switch on Switch3, then at situation B, I need to switch on Switch5, etc. Can I write just one command, with the switch number as the input, so that it can switch on different boolean control (Switch#) at different time? (i.e. treating the variables Switch1 to Switch10 as an array of variables called Switch#).
BTW, this question was asked by another LabView user in 2000, but there hasn't been a satisfactory anwer.

I can think of one way off the top of my head, but it suffers from some fundamental flaws, and I'm not entirely familiar with the functions involved, so it may not work!
The solution:
It is possible to open a reference (using the Open VI Reference) to the VI being run. From there, it is possible to obtain a reference to all of the controls on the front panel using property nodes. Using these references, it should be possible to set the properties of the controls.
The flaws: It's complex, it's large overhead, and it's virtually impossible to maintain.
I've run into the same problem before with controls embedded in tab controls, since buttons on two different tabs cannot belong to the same cluster or array. I have yet to see a solutio
n that I like.
Perhaps someone else out there has seen a good solution for this one? Or maybe NI will bite the bullet and implement heterogeneous arrays and "virtual" clusters (clusters who's front panel objects are not spatially associated
Sorry I can't help more.

Mac Pro (2009) RAID Card - Can't create RAID Set

Hi Everyone,
I have a Mac Pro 4,1 (Model 2009) running Mavericks 10.9.2. with the Apple RAID Card installed. I got 4 new SAS Drives (Dell Toshiba MK2001TRKB) which I'm trying to configure into a single RAID5 set.
OS X detects the individual drives and with Disk Utility I can partition and/or format the individual drives. However when I try to create a RAID5 set using RAID Utility, the card won't create the RAID set. Ik keeps on showing the white-blue stripped progress bar. Tried creating a RAID0 or RAID1 with just 2 drives, but the card just doesn't create a RAID set.
Anyone got a clue why this isn't working?
Thanks,
Sander

Manualy erased all 4 the drives and it worked instantly. System is now initializing the volume :-)
Still a bit strange. All 4 the drivers where brand new. I did some further testing and if I select the partion tab and just create a new partition on each drive, it still doesn't work. I have to select the erase option in Disk Utility and just do a simple erase on each drive in order to be able to create the RAIDset.
Anyway, Thanks for the advise; performance even during initializing is pretty fast. I'm curious to see what kind of performance I get aftet the initialization is completed.

Can't create an array of WebBrowsers

I drop an array constant down (and I tried this with a cluster also) and I try to add a WebBrowser into it but it won't take it. The web browser is in the .Net and ActiveX pallete - if you hover over it, its type says SHDocVw.IWebBrowser2. I was hoping to have an array of webBrowsers because (as I've mentioned in numerous other threads) I need to talk via secure (TLSV1) link to numerous radios - each will have a different IP address, and would need their specific html (or xml in some cases) data displayed on its specific browser. I would then process that radio's specific data. I could probably create X (upto 32) instantiations of my EXE (that currently has one webBrowser), but that seems extremely difficult to manage. I did see that I can have a tab control with numerous tabs (say 32) and have a web browser on each. I currently (for one webBrowser) get its Document property, its body, then its inner text, and if that string length is > 0 then there is something there. This isn't a very reliable method of detecting a message has arrived, so I'm open to suggestions. Regardless, I would need a way to know which of my 16 (or maybe 32) web servers received data, and process that message accordingly. I thought of somehow incorporating an object-oriented approach such that everytime a new radio was desired, a new object would be created to support all its properties/methods - this is somewhat uncharterd territory, however.

Hi mrbean,
instead of creating a lot of instances of your program, you can create a vi template with one activex browser in it and create as many instances as you need.
Hope it helps.
Mike

Please help - I can not create large arrays of images (no more than 108 elements)

Hello,
I am working in an application where i acquire 300 high resolution images (3Mp) and then i process each of those frames.
When i try to put alll those frames in one array of images, the system does not let me more than 108 elements. There is no such message like out of memory or memory error. It is just that when i visualize the array of images, there are good frames the first 108 elements, and then white frames the rest of the elements.
Ideallically i would prefer to process frames as i am acquiring them, but i am concerned about the remaining processing time for the rest of the tasks.
Then, as an alternative, I have tried to store frames in two shorter arrays, and i ended up observing that when the first array (say 50 elements) is full and the second array starts (another 50 elements for example), labview needs a certain time in the the middle (like three seconds between closing first array and starting acquiring on the second array). If i dont wait that time between arrays, both arrays contain the same information. I know, this is weird, and i know about the fact of passing information by reference on imaq images.
The most interesting thing is that when i reduce considerably the resolution of the image (say that now, instead 3Mp they are 2Mp), the maximum number of elements on the arrays are exactly the same: 108, so this makes me wonder if it is a memory constrain. And the code is fairly simple, there is no way that i am cutting the acquisition at the number 108.
So my question is, How can i put 300 frames in one just one array? or How can eliminate the time i have to wait between arrays?
I have heard about memory allocation and so, but i am not sure how to proceed. I have windows 7.
Thanks in advance,
Roberto

It's hard to visualize. Please post the code - or at least a shell representing your code - so we can see what is happening. Are you sure you are getting 108 contiguous pictures, or are some aquisitions being skipped? Is the first picture in the array the first aqcuisition? Is the last picture the last acquisition?
I really don't think it is about memory allocation. I think it could be about your method of acquiring and processing said acquisitions.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

How can I create sub-arrays based on the positions of indicies in a separate index array?

Please forgive me if this question is basic or obvious. I am fairly new to LabVIEW and I'm trying to learn as I go along.
I have a 1D array of index values (the number of possible index values is not fixed, but can vary between uses of the application; it could be just {0, 1} on one day and {1, 5, 11, 678} on another) and a 1D array of measurement values (doubles). I'd like to parse the measurement values into sub-arrays for each index, so that if my index array was:
[0 1 1 1 1 5 5 0 5 5 1 0 1 1 5]
and my measurement array was:
[0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0.10 0.11 0.12 0.13 0.14 0.15]
I would get back 3 sub-arrays:
[0.1 0.8 0.12]
[0.2 0.3 0.4 0.5 0.11 0.13 0.14]
[0.6 0.7 0.9 0.10 0.15]
I know there must be a simple way to do this, I guess I'm just stuck too much in matlab-array thinking to figure it out... please help!
-- jph
Solved!
Go to Solution.

jamespherman wrote:
Thus, I figured it might be possible to generalize this idea and send multiple sets of XY values to an XY graph.
OK, all we need is a trivial modification of what we already have. XY graph data is easiest handled using complex data. Here's a quick rewrite. See if this works for you.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
SplitInGroupsGraph.vi ‏14 KB

Can we create an array as a button?

I konw that my subject is not really clear....
I have files names in an excel project. I want to display all of this files like a button in the aim to open one, considering to files inside the excel file:
For instance : if I have 3 files : file1, file2, file3 the VI does a menu button with ONLY 3 solutions: file1, file2, file3 to permit to the user to clic on one of this 3 files.
Is it possible?Message Edited by ramiral on 04-26-2005 04:50 AM
labview 7.0

copied from labview manual:
Use the Property Node to get and set various properties on an application
or VI. Select properties from the node by using the Operating tool to click
the property terminal or by right-clicking the white area of the node and
selecting Properties from the shortcut menu.
You can read or write multiple properties using a single node, however
some properties are not writable. Use the Positioning tool to resize the
Property Node to add new terminals. A small direction arrow to the right of
the property indicates a property you read. A small direction arrow to the
left of the property indicates a property you write. Right-click the property
and select Change to Read or Change to Write from the shortcut menu to
change the operation of the property.
The node executes from top to bottom. The Property Node does not execute
if an error occurs before it executes, so always check for the possibility of
errors. If an error occurs in a property, LabVIEW ignores the remaining
properties and returns an error. The error out cluster contains information
about which property caused the error.
If the Property Node opens and returns a reference to an application or VI,
use the Close Reference function to close the application or VI reference.
LabVIEW closes control references when that reference is no longer
needed. You do not have to explicitly close control references.
Implicitly Linked Property Nodes
When you create a Property Node from a front panel object by
right-clicking the object and selecting Create»Property Node from the
shortcut menu, LabVIEW creates a Property Node on the block diagram
that is implicitly linked to the front panel object. Because these Property
Nodes are implicitly linked to the object from which it was created, they
have no refnum input, and you do not need to wire the Property Node to
the terminal of the front panel object or the control reference. Refer to the
Controlling Front Panel Objects section of this chapter for more
information about control references.
if you still don't get it, i suggest that you read the labview manual, or parts of it and take a look at a few example's supplied by labview

Can I create RAID 1 mirror without ERASE ing drive?

Hi!
Simple enough, I have a nearly new 1TB (call it HD2) and decided to add an identical one (call it HD3) and create a mirrored RAID in the MacPro (everything is backed up externally).
Drive HD2 is half full with client photographs and stuff, and I would like to drag it into a RAID set with the new drive HD3.
When I do that I'm prompted to erase the drive. Is there a way to create a RAID without the erase?
By the way, would using a RAID0 be a better option perhaps? I really like the ability to just unplug a duff drive and swap for a good blank one and let the computer do its stuff. That's already come in handy once this year with a failed ext drive!
Cheers

Good backups (2 per volume) are more useful.
Creating a RAID destroys the data on the drives.
A mirror for 24/7 uptime and where live recording is essential. In which case, 3, not 2, drives in a mirror are your best bet, and using $149 program SoftRAID.

Can't create float array with a variable name as size parameter?

Hi,
When trying to compile code that users a variable in the array subscript to set the size, CC gives the following error:
Error: An integer constant expression is required within the array subscript operator.
1 Error(s) detected.The code is as follows:
int main()
//blah blah
const int arrSize = numberVariables;
    float tempArr[arrSize];
//blah blah
}Output from CC -V:
unknown% CC -V
CC: Sun C++ 5.9 SunOS_i386 Patch 124864-01 2007/07/25Output from uname -a:
unknown% uname -a
SunOS unknown 5.10 Generic_137138-09 i86pc i386 i86pcAny ideas on why CC is giving that error?
~Slow
Edited by: SlowToady on Nov 15, 2008 8:28 PM
Edited by: SlowToady on Nov 15, 2008 8:36 PM

Marc_Glisse wrote:
Last time I checked, I did not see VLAs in the draft of the next C++ standard, which I believe is now feature complete. So either I missed it (quite possible) or VLAs were considered a bad idea (for C as well many people consider alloca and VLA bad ideas). It is however a very reasonable extension to have (care to file a RFE?).The following code performs like this on an IBM x366 with 4 single-core 3.16 GHz Xeons, running OpenSolaris build 96:
-bash-3.2$ ./thrtest
malloc() took 440895924 ns
alloca() took 2122522 ns
-bash-3.2$Using alloca is two hundred times faster.
Two hundred times faster.
Think about that next time some pedant says alloca "sucks".
Try for yourself. Here's the code:
#include <stdlib.h>
#include <pthread.h>
#include <alloca.h>
#include <strings.h>
#include <stdio.h>
#define NUM_THREADS 8
#define ITERS 10000
#define BYTES 1024
typedef void ( *mem_func_t )( void );
void alloca_iter()
    char *ptr;
    ptr = ( char * ) alloca( BYTES );
    memset( ptr, 0, BYTES );
    return;
void malloc_iter()
    char *ptr;
    ptr = ( char * ) malloc( BYTES );
    memset( ptr, 0, BYTES );
    free( ptr );
    return;
void *thread_proc( void *arg )
    mem_func_t mem_iter;
    mem_iter = ( mem_func_t ) arg;
    for ( int ii = 0; ii < ITERS; ii++ )
        mem_iter();
    return( NULL );
int main( int argc, char **argv )
    pthread_t tids[ NUM_THREADS ];
    void *results[ NUM_THREADS ];
    hrtime_t start;
    hrtime_t end;
    int ii;
    start = gethrtime();
    for ( ii = 0; ii < NUM_THREADS; ii++ )
        pthread_create( &tids[ ii ], NULL, thread_proc, malloc_iter );
    for ( ii = 0; ii < NUM_THREADS; ii++ )
        pthread_join( tids[ ii ], &results[ ii ] );
    end = gethrtime();
    printf( "malloc() took %ld ns\n", end - start );
    start = gethrtime();
    for ( ii = 0; ii < NUM_THREADS; ii++ )
        pthread_create( &tids[ ii ], NULL, thread_proc, alloca_iter );
    for ( ii = 0; ii < NUM_THREADS; ii++ )
        pthread_join( tids[ ii ], &results[ ii ] );
    end = gethrtime();
    printf( "alloca() took %ld ns\n", end - start );
    return( 0 );
}

Can someone help me in creating an Array for the following?

Hi this is a flash banner done using AS3 but it is giving me bugs when published, can someone please look at the the following link http://webtemp2.idm.net.lb/alamflash/home.html
and below is the script, can i create an array?
stop();
import fl.transitions.Tween;
import fl.transitions.easing.*;
mc_animation.mc_scaffold.buttonMode = true;
mc_animation.mc_prop.buttonMode = true;
mc_animation.mc_ladder.buttonMode = true;
mc_animation.mc_tower.buttonMode = true;
mc_animation.mc_trade.buttonMode = true;
///////////////////// start ///////////////////////////////
new Tween (mc_animation.mc_scaffold,"y", Elastic.easeInOut,-300,3,1.5,true);
new Tween (mc_animation.mc_prop,"y", Elastic.easeInOut,-300,3,2,true);
new Tween (mc_animation.mc_ladder,"y", Elastic.easeInOut,-300,3,2.5,true);
new Tween (mc_animation.mc_tower,"y", Elastic.easeInOut,-300,3,3,true);
new Tween (mc_animation.mc_trade,"y", Elastic.easeInOut,-300,3,3.5,true);
new Tween (mc_animation.mc_separators,"y", Elastic.easeInOut,-300,15,1,true);
/////////////////////// scaffolding ////////////////////////////
function scafoldinfo(e:Event):void {
new Tween (mc_animation.mc_scaffold,"x", Elastic.easeInOut,mc_animation.mc_scaffold.x,1000,4,true);
new Tween (mc_animation.mc_prop,"x", Elastic.easeInOut,mc_animation.mc_prop.x,1100,3.5,true);
new Tween (mc_animation.mc_ladder,"x", Elastic.easeInOut,mc_animation.mc_ladder.x,1200,3,true);
new Tween (mc_animation.mc_tower,"x", Elastic.easeInOut,mc_animation.mc_tower.x,1300,2.5,true);
new Tween (mc_animation.mc_trade,"x", Elastic.easeInOut,mc_animation.mc_trade.x,1400,2,true);
new Tween (mc_animation.mc_separators,"y", Elastic.easeInOut,mc_animation.mc_separators.y,-300,1.5,true);
new Tween (im_scaffolding,"x", Elastic.easeInOut,-1100,0,5,true);
new Tween (info_scaffold,"y", Elastic.easeInOut,-300,30,6,true);
function closescafoldinfo(e:Event):void {
new Tween (info_scaffold,"y", Elastic.easeOut,30,300,5,true);
new Tween (im_scaffolding,"x", Elastic.easeInOut,0,-1100,2,true);
new Tween (mc_animation.mc_scaffold,"x", Elastic.easeInOut,mc_animation.mc_scaffold.x,2.4,4,true);
new Tween (mc_animation.mc_prop,"x", Elastic.easeInOut,mc_animation.mc_prop.x,197.3,3.5,true);
new Tween (mc_animation.mc_ladder,"x", Elastic.easeInOut,mc_animation.mc_ladder.x,392.3,3,true);
new Tween (mc_animation.mc_tower,"x", Elastic.easeInOut,mc_animation.mc_tower.x,587.5,2.5,true);
new Tween (mc_animation.mc_trade,"x", Elastic.easeInOut,mc_animation.mc_trade.x,782.2,2,true);
new Tween (mc_animation.mc_separators,"y", Elastic.easeInOut,mc_animation.mc_separators.y,30,2,true);
mc_animation.mc_scaffold.addEventListener(MouseEvent.CLICK,scafoldinfo);
info_scaffold.btn_close.addEventListener(MouseEvent.CLICK,closescafoldinfo);
///////////////////////////////////////////////// propping///////////////////////////////////////////////////////////
function proppinginfo(e:Event):void {
new Tween (mc_animation.mc_scaffold,"x", Elastic.easeInOut,mc_animation.mc_scaffold.x,1000,4,true);
new Tween (mc_animation.mc_prop,"x", Elastic.easeInOut,mc_animation.mc_prop.x,1100,3.5,true);
new Tween (mc_animation.mc_ladder,"x", Elastic.easeInOut,mc_animation.mc_ladder.x,1200,3,true);
new Tween (mc_animation.mc_tower,"x", Elastic.easeInOut,mc_animation.mc_tower.x,1300,2.5,true);
new Tween (mc_animation.mc_trade,"x", Elastic.easeInOut,mc_animation.mc_trade.x,1400,2,true);
new Tween (mc_animation.mc_separators,"y", Elastic.easeInOut,mc_animation.mc_separators.y,-300,1.5,true);
new Tween (im_propping,"x", Elastic.easeInOut,-1100,0,5,true);
new Tween (info_proping,"y", Elastic.easeInOut,-300,30,6,true);
function closeproppinginfo(e:Event):void {
new Tween (info_proping,"y", Elastic.easeOut,30,300,5,true);
new Tween (im_propping,"x", Elastic.easeInOut,0,-1100,2,true);
new Tween (mc_animation.mc_scaffold,"x", Elastic.easeInOut,mc_animation.mc_scaffold.x,2.4,4,true);
new Tween (mc_animation.mc_prop,"x", Elastic.easeInOut,mc_animation.mc_prop.x,197.3,3.5,true);
new Tween (mc_animation.mc_ladder,"x", Elastic.easeInOut,mc_animation.mc_ladder.x,392.3,3,true);
new Tween (mc_animation.mc_tower,"x", Elastic.easeInOut,mc_animation.mc_tower.x,587.5,2.5,true);
new Tween (mc_animation.mc_trade,"x", Elastic.easeInOut,mc_animation.mc_trade.x,782.2,2,true);
new Tween (mc_animation.mc_separators,"y", Elastic.easeInOut,mc_animation.mc_separators.y,30,2,true);
mc_animation.mc_prop.addEventListener(MouseEvent.CLICK,proppinginfo);
info_proping.btn_close.addEventListener(MouseEvent.CLICK,closeproppinginfo);
//////////////////////////////////// Ladders //////////////////////////////////////////////////////
function laddersinfo(e:Event):void {
new Tween (mc_animation.mc_scaffold,"x", Elastic.easeInOut,mc_animation.mc_scaffold.x,1000,4,true);
new Tween (mc_animation.mc_prop,"x", Elastic.easeInOut,mc_animation.mc_prop.x,1100,3.5,true);
new Tween (mc_animation.mc_ladder,"x", Elastic.easeInOut,mc_animation.mc_ladder.x,1200,3,true);
new Tween (mc_animation.mc_tower,"x", Elastic.easeInOut,mc_animation.mc_tower.x,1300,2.5,true);
new Tween (mc_animation.mc_trade,"x", Elastic.easeInOut,mc_animation.mc_trade.x,1400,2,true);
new Tween (mc_animation.mc_separators,"y", Elastic.easeInOut,mc_animation.mc_separators.y,-300,1.5,true);
new Tween (im_ladders,"x", Elastic.easeInOut,-1100,0,5,true);
new Tween (info_ladders,"y", Elastic.easeInOut,-300,30,6,true);
function closeladdersinfo(e:Event):void {
new Tween (info_ladders,"y", Elastic.easeOut,30,300,5,true);
new Tween (im_ladders,"x", Elastic.easeInOut,0,-1100,2,true);
new Tween (mc_animation.mc_scaffold,"x", Elastic.easeInOut,mc_animation.mc_scaffold.x,2.4,4,true);
new Tween (mc_animation.mc_prop,"x", Elastic.easeInOut,mc_animation.mc_prop.x,197.3,3.5,true);
new Tween (mc_animation.mc_ladder,"x", Elastic.easeInOut,mc_animation.mc_ladder.x,392.3,3,true);
new Tween (mc_animation.mc_tower,"x", Elastic.easeInOut,mc_animation.mc_tower.x,587.5,2.5,true);
new Tween (mc_animation.mc_trade,"x", Elastic.easeInOut,mc_animation.mc_trade.x,782.2,2,true);
new Tween (mc_animation.mc_separators,"y", Elastic.easeInOut,mc_animation.mc_separators.y,30,2,true);
mc_animation.mc_ladder.addEventListener(MouseEvent.CLICK,laddersinfo);
info_ladders.btn_close.addEventListener(MouseEvent.CLICK,closeladdersinfo);
//////////////////////////////////// towers //////////////////////////////////////////////////////
function towersinfo(e:Event):void {
new Tween (mc_animation.mc_scaffold,"x", Elastic.easeInOut,mc_animation.mc_scaffold.x,1000,4,true);
new Tween (mc_animation.mc_prop,"x", Elastic.easeInOut,mc_animation.mc_prop.x,1100,3.5,true);
new Tween (mc_animation.mc_ladder,"x", Elastic.easeInOut,mc_animation.mc_ladder.x,1200,3,true);
new Tween (mc_animation.mc_tower,"x", Elastic.easeInOut,mc_animation.mc_tower.x,1300,2.5,true);
new Tween (mc_animation.mc_trade,"x", Elastic.easeInOut,mc_animation.mc_trade.x,1400,2,true);
new Tween (mc_animation.mc_separators,"y", Elastic.easeInOut,mc_animation.mc_separators.y,-300,1.5,true);
new Tween (im_towers,"x", Elastic.easeInOut,-1100,0,5,true);
new Tween (info_tower,"y", Elastic.easeInOut,-300,30,6,true);
function closetowersinfo(e:Event):void {
new Tween (info_tower,"y", Elastic.easeOut,30,300,5,true);
new Tween (im_towers,"x", Elastic.easeInOut,0,-1100,2,true);
new Tween (mc_animation.mc_scaffold,"x", Elastic.easeInOut,mc_animation.mc_scaffold.x,2.4,4,true);
new Tween (mc_animation.mc_prop,"x", Elastic.easeInOut,mc_animation.mc_prop.x,197.3,3.5,true);
new Tween (mc_animation.mc_ladder,"x", Elastic.easeInOut,mc_animation.mc_ladder.x,392.3,3,true);
new Tween (mc_animation.mc_tower,"x", Elastic.easeInOut,mc_animation.mc_tower.x,587.5,2.5,true);
new Tween (mc_animation.mc_trade,"x", Elastic.easeInOut,mc_animation.mc_trade.x,782.2,2,true);
new Tween (mc_animation.mc_separators,"y", Elastic.easeInOut,mc_animation.mc_separators.y,30,2,true);
mc_animation.mc_tower.addEventListener(MouseEvent.CLICK,towersinfo);
info_tower.btn_close.addEventListener(MouseEvent.CLICK,closetowersinfo);
//////////////////////////////////// trading //////////////////////////////////////////////////////
function tradinginfo(e:Event):void {
new Tween (mc_animation.mc_scaffold,"x", Elastic.easeInOut,mc_animation.mc_scaffold.x,1000,4,true);
new Tween (mc_animation.mc_prop,"x", Elastic.easeInOut,mc_animation.mc_prop.x,1100,3.5,true);
new Tween (mc_animation.mc_ladder,"x", Elastic.easeInOut,mc_animation.mc_ladder.x,1200,3,true);
new Tween (mc_animation.mc_tower,"x", Elastic.easeInOut,mc_animation.mc_tower.x,1300,2.5,true);
new Tween (mc_animation.mc_trade,"x", Elastic.easeInOut,mc_animation.mc_trade.x,1400,2,true);
new Tween (mc_animation.mc_separators,"y", Elastic.easeInOut,mc_animation.mc_separators.y,-300,1.5,true);
new Tween (im_trading,"x", Elastic.easeInOut,-1100,0,5,true);
new Tween (info_trading,"y", Elastic.easeInOut,-300,30,6,true);
function closetradinginfo(e:Event):void {
new Tween (info_trading,"y", Elastic.easeOut,30,300,5,true);
new Tween (im_trading,"x", Elastic.easeInOut,0,-1100,2,true);
new Tween (mc_animation.mc_scaffold,"x", Elastic.easeInOut,mc_animation.mc_scaffold.x,2.4,4,true);
new Tween (mc_animation.mc_prop,"x", Elastic.easeInOut,mc_animation.mc_prop.x,197.3,3.5,true);
new Tween (mc_animation.mc_ladder,"x", Elastic.easeInOut,mc_animation.mc_ladder.x,392.3,3,true);
new Tween (mc_animation.mc_tower,"x", Elastic.easeInOut,mc_animation.mc_tower.x,587.5,2.5,true);
new Tween (mc_animation.mc_trade,"x", Elastic.easeInOut,mc_animation.mc_trade.x,782.2,2,true);
new Tween (mc_animation.mc_separators,"y", Elastic.easeInOut,mc_animation.mc_separators.y,30,2,true);
mc_animation.mc_trade.addEventListener(MouseEvent.CLICK,tradinginfo);
info_trading.btn_close.addEventListener(MouseEvent.CLICK,closetradinginfo);

I am afraid this is undocumented usage of Tween class. According to the class documentation one needs to create instances of Tween. Since there are no explicit instances - I suspect that one Teen is overriding another or, perhaps, is not getting instantiated all together.
So, the documented usage is:
var tween:Tween = new Tween()
Not just new Tween()
Re: http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/fl/transitions/Tween.html
I also would suggest you look into TweenLite or TweenMax classes - they are much more compact, easier to use and accommodate several properties tweening in one swoop.

Failed Boot Camp Install of Vista 32 has broken one of my RAID arrays

Attempted to install Windows through Boot Camp on my Mac Pro, I have a RocketRaid 2320 controller card, RAID was built through Disk Utility. No redundancy, I built 2 separate 1.8TB RAIDs (4 x 500MB drives) in each of 2 separate cabinets. Windows install attempt brought up the HighPoint BIOS, then failed to install Windows and I got the well-known "Select CD-ROM boot type" message. Now, one of the 2 RAID arrays appears to be broken. Disk Utility still sees all 4 drives, but only recognizes 3 of them as a RAID slice with a GUID Partition Table. The other shows up as "disk5s1" with a Master Boot Record as the partition map scheme. While much of what was on this array was redundant with the second, I have a lot of work that was only on this one, so any help in how to fix and/or reconnect the drives of this array would be incredibly appreciated!

1. I remembered RocketRaid 2320 don't provide EFI64bit from Highpoint website so you can't set boot camp.
2. Does your Highpoint raid management utility(Highpoint engineer also called WebGui)
provide any message for your broken raid?I am also a Highpoint user, I give you some suggestion:
A.(1)If your WegGui in Manage--Array show your broken raid status is "Critical"and your bad HDD, please replace bad HDD then select Maintenance items of upper right corner of the page
(2)This will open the Array Information dialog box, select Add disk button to choose the replaced HDD then press "Submit", you can rebuild your RAID array.
B.(1)If your WegGui in Manage--Array show your broken raid status "Disable", you just can use one of Webgui function--"Keep old Data"(But it still have high risks to lose your data, it is the final method to use, I suggest you try the A method best.)
(2) Select "Maintenance" items of upper right corner of the page, from the "Array Information" dialog box, select "Delete" button, and prompted a warning: the array of data will be deleted whether to continue, choose OK..
(3)Back to Manage--Array page, this time the array has been deleted, double-click the "Create Array"
button to display the page to create the disk. From the Initialization Method field select “Keep old Data”, the remaining arrays in strict accordance with the original set of parameters, the required attention parameters include: Number of RAID member disk, Array Type, Block Size, Sector Size.
(4)Click "Create", the initialization process will start automatically, RAID
recovery complete, prompts to create a successful, choose OK.
(5)See your volume in Mac Disk Utility if your data is recoveryed

Can't create raid array in 10.4.6

Similar Messages

Maybe you are looking for