Can't create system from par in Portal 7.3

Hello experts,
lately I have insatlled the new Netweaver 7.3 Portal AS Java. Now I want to create a new system to make email-connectivity like described on help.sap.com. Following the instructions I get stuck at the point choosing new system from par. This option is not given...
Can somebody help? How can I create a connectivity to our exchange without that option? Or is there a note poitning to to this case?
Thanks in advance.
Kind regards
Lu Huynh

Hi,
In Netweaver 7.3, you have a tool called
SystemFromParConverter to achieve this requirement. Please follow the below help link for more details.
http://help.sap.com/saphelp_nwce711/helpdata/en/45/26d6a3522b4c2de10000000a1553f6/frameset.htm
PS: Please do the steps mentioned in the above help link from the EP server itself and not from your own local system. Browse the EP server folders to locate the Par file.
you have to place the par file in the EP server.
Thanks and Regards,
Sowmya K

Similar Messages

Cannot create iView from PAR file

I am trying to create an iView from PAR file. But when I select the option,
"Portal component - create an iView from a portal component contained in a deployed portal archive (PAR) file"
and click next, I get the following error.
Error______________________________________
Step 1: Portal Archive Selection
No templates to display. You are not assigned to any existing templates.
I have portal_configurator and developer roles assignmed to myself. Which other role do I need? I cannot get admin role.
Note: Other users with admin roles can create iViews.

Hi
What is your portal version details ?
In EP 7.0 you do not have the option -- New From PAR.
So to create IView from Par, you should select the option New --> IView and then there will be an option to select par file.
Otherwise
1.Check if your par file is deployed on server.
2. Check the portalapp.xml, if you have configured your components properly.
Cheers
Chinmaya
reward for helpful answers

Unable to Create System from System template

Dear All,
I am planning to Integrate my Lotus Notes Web mail thru Portal(using SSO).
For that I have uploaded file com.sap.portal.howtos.webapp.par into my development portal, and created a System template , but When i am going to create System from that system template it is not visible.Kindly Suggest...
If is there any other solution for SSO to access lotus web mail.
Thanks & Regards
Manoj Sahoo

Sir/Madam,
I have created iView for my lotus web mail and set following parameters
System: WebMail (system alias)
URL template: http://10.80.10.20
User mapping template: username=<MappedUser>&Password=<MappedPassword>
But it is asking for login??
Pl suggest.
Regards
Manoj Sahoo

Can't create PDFs from Acrobat or Word?

Downloaded the 8.1.4 update and now I can't create PDFs from Acrobat or Word. If I try to create a PDF from the print menu, I get a message indicating that there are no print drivers for this...any ideas?

Thanks for responding. Yep, I tried repairing it...no dice. Then I realized that I'd re-installed AA Pro 8 (having completely given up on the AA Pro 9 upgrade that crashed my system) but not the updates. So I went through and re-installed each update. Still no dice. Then I did another repair. Nope. When I try to create a PDF via the print menu, I get a "Windows cannot print due to a problem with the current printer setup." This tells me that I have driver problem. But everything else prints fine, and I'm pretty sure Acrobat doesn't have drivers. I'm stumped...

Can't create PDFs from Word due to Cambria font. Help.

I'm using win 7 32 bit office 2010 acrobat pro 9. I can't create pdfs from word because of problems with cambria. I've ttried all the fixes I can find but none worked. Any more ideas?
[thread title updated by moderator]

How are you trying to create the PDF? With AA9 you have to print to the Adobe PDF printer or use the MS plugin.
When you say you cannot create PDFs because of Cambria, what error messages are you getting and copy them here? At this point we really do not know what you are having problems with or how you are trying to create PDFs.
In the future, please provide a topic to help folks that are stepping through all of the posts. A blank topic almost led me to simply skip your post.

Java.sql.SQLException: can't create statement from closed connection

java.sql.SQLException: can't create statement from closed connection.
at com.caucho.sql.QPooledConnectionImpl.prepareStatement(QPooledConnecti onImpl.java:411)
I am getting this error with my JSP's, i am running on Resin on Win2k, and MySql as backend.
Has anyone else also faced this issue ?
Looking for someone to help me to solve this issue.
rc

Looking for someone to help me to solve this issue.Maybe you are closing the connections. You might want to verify that you are not doing that. Or if you are that that is the correct way to return the connection to the pool.
Or you could have stale connections. Some databases will time out connections if the connection is no used in a while. (This is a good thing.) But this means connection pools must do something with connections that are not used for a while. The pools usually have a configuration option(s) which allows you to set up a keep alive message which keeps the database from closing the connection.

Can't create Project from the Template or access project template

Dear Experts,
We are facing a issue while trying to access the project template/create the project from project template.
we have 4 project template in place and of these two are working perfectly fine but
From remaining two we are not being able to create project and even templates are not accesible , whenever we are trying to access the project template system rotates a circle for some time and keeps us on the same page.
Even when we are trying to create project from the same template, system does the same again rotates the circle for some time and keeps us on the same screen.
And System is not throwing any error for the same (we have checked in the log as well) just not letting us in and not allowing us to create project.
Any Help Will be Highly Appreciated.
Regards,
Rakesh Daiya

Dear Experts,
We were able to find out the issue,
We added 3 groups to the template with "Reviewer" access with "Document Only" Type in the project template.
When we changed the type to "Template and Document" from "Document Only" and system started allowing us to create projects from the template.
Can anyone please help me with one query,
Can we add a group(which includes all the buyers) with reviewer access and with Document only type?
Does this really be a reason behind projects are not getting created from template?
Any help will be appreciated
Regards,
Rakesh Daiya

Can't create invoice from the delivery

Hello.
Ship out the trade order then i created the delivery and PGI successfully.
But when i went to VF01 to invoice the delivery i can´t create it.
I take a look to the LOG and this is what i found:
Error Log
6910517662 000010 The item is blocked for billing
I double click the item and in the configuration of Financial processing there is a field called "Block" but there is nothing selected over there. Do you have any suggestion?
I appreciate your help

The item is blocked for billing
Apart from the suggestions, if that particular material is kept open in some other system, then also, system will throw this error. Also ensure that in material master Sales Org.1 view, this material is not blocked against the field "X-distr.chain status"
thanks
G. Lakshmipathi

Can't create archive from file menu

Hello,
I can't create 'archive' (tar.gz) from file menu in Color (Save Archive As...).
I don't have authorization problem on my folder project; i can create myself a tar.gz archive in the folder Archive of my Color's project.
The system.log file said:
Jul 16 09:45:51 fcp1 [0x0-0x1e01e].com.apple.color[215]: tar: Cowardly refusing to create an empty archive
Jul 16 09:45:51 fcp1 [0x0-0x1e01e].com.apple.color[215]: Try `tar --help' or `tar --usage' for more information.

some other users report difficulties, crashes, freeze-ups and very long save times associated with the Operating System and Finder. There is apparently some background file compression utility that may be interfering with your save routine. There are a couple of threads related to this issue on this forum, so a bit of searching may yield a solution.
I haven't encountered it in nearly four years of day-to-day with three separate systems in either Tiger or Leopard. Suffice to say that if you have any third-party whiz-bang utilities running, COLOR is very vulnerable to OS corruption as it is a stripped-out race car that doesn't expect or tolerate much else when it comes to sharing the computer.
jPo

Can't create PDF from Word file

I may be missing some functionality or that functionality may not exist.
I'm running Acrobat Pro 9.2 and MS Word 2004 (11.5) on OSX Leopard 10.5.8. I want to create a PDF from a Word file but NOT using the Print dialog. I want to either create it in Acrobat using File > Create PDF > From File or create it from within Word using the Acrobat menu/toolbar. This is so that it will end up as a tagged PDF.
However, I don't have an Acrobat menu or toolbar in Word. I thought Acrobat was supposed to have installed these into MS Office when I installed Acrobat. And when within Acrobat if I select File > Create PDF > From File and choose a Word file, I get a message "Acrobat could not open 'filename.doc' because it is either not a supported file type or because the file has been damaged". This happens for all Word files.
Looking in Acrobat > About Adobe Plug-Ins... under Convert2AdobePDF it says 'Loaded: no'.
Are these two methods of converting Word files to PDFs something that can only be done in the Windows version of Acrobat? Or is there a plug-in or update I can download to install this missing functionality?
Thanks for your help,
Mark

Keep your Office2004. But Office 2008 does have a way to create PDF's from within the word and excel Programs.
It works better than through the AdobePDF Printer, or through the Apple Print menus save as PDF. (Unless you have X.6.x Snow leopard)
One thing it gets around is a long standing Problem Acrobat has had with word and excel since Word 6.0.1.a/Excel 5.0.1a. Acrobat doesn't know how to interpert Word Page section Breaks. Chopping up a word/excel document in to multiple PDFs that have to be merged back together. MS came up with their own PDF Converter that gets around that problem.

Can't Create PDF "from file" using any MS Office files

Acrobat 8.1.1 Pro. (OS = XP), as part of the CS3 premium edition.
I can no longer get Acrobat to recognize any of the MS Office applications extensions (.doc, .ppt, etc...) for use with either Create PDF "From File" or when using the Combine Files feature to Merge or Package. The extensions are no longer even listed as an option in the dialog box, or in the Preference settings under "Convert to PDF".
FYI- I can still use the PDF Maker functionality from within the MS Office application to create a PDF.
Any Idea what could have happened, or more importantly how to fix?
***Update***
I have re-installed the Acrobat 8 application, and the problem still exists.
I'm truly puzzled.

I get this with my PC and I ran detect-repair and reinstalled. Some PDF's I can open and other's I cannot. I can send the email to a cohort and they can open fine.
"Can't create file: Right-click the folder you want to create the file in and then click Properties on the shortcut menu to check your permissions for the folder"
Any ideas would be great.
Thanks!

Problem Create System Object in the Portal for connecting CRM abap

Hi, i creating system in the portal (JCX) for connecting system ABAP CRM (CRX), after create system try run test connection and show messages error:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
In the logs the portal (NWA) show messages:
Failed in creating the JCO Connection.
The logs operation system (log Security_audit.log)
Error> occured >Thu Jun 23 11:34:41,278<RfcException: message: 'mshost' missing Return code: RFC_INVALID_PARAMETER(19 Return code: RFC_INVALID_PARAMETER(19) error group: 101 key: FC_ERROR_PROGRAM
 at com.sap.mw.rfc.api.RfcOptions.checkParameters(RfcOptions.java:438)
 at com.sap.mw.rfc.api.RfcApi.RfcOpen(RfcApi.java:688)
 at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1079)
 at com.sap.mw.jco.JCO$Client.connect(JCO.java:3256)
Plase help, any idea?

message: 'mshost' missing Return
During the System Object Creating in System Landscape, there is any entry as Message Server Host: CRM MS HOST
and Message Server Port : sapmsSID and add this entry in etc/services --> bottom samsSID 36NN/tcp where NN is instance number.
Try this and let me know.
Thanks
SM

24 imac snow leopard backup on 27 iMac Lion? Can I restore system from backup?

Hi guys, I have a 24 inch iMac which came with preinstalled Snow Leopard. I am about to buy a new 27 iMac which I beleve comes with preinstalled Lion. I have been using time machine to fully back up my 24 inch iMac. What I want to know, is that when I buy my new 27 inch iMac, will I be able to restore it's system from my Snow leopard 24 inch imac backup? Please get back to me, thank you for your time

Start with Kappy's post here: https://discussions.apple.com/thread/3525616
As it says in the next-to-last paragraph, you can restore some things, but not others.
"Simple" apps, that were just dropped into the Applications folder, can be restored that way, but be careful not to replace any Snow Leopard versions with Lion versions -- they likely won't work.
"Complex" apps must be reinstalled from their original discs. See Transferring Applications for an explanation.
Some Snow Leopard apps won't work with the Lion file/folder structure. Mail is one for sure, and there may be others.
All told, you may be better off fixing whatever's wrong, if possible, and/or getting used to or finding workarounds for changes you don't like.

Can't create VM from template on iSCSI

Hello,
I'm trying to create new VM from original Oracle template "OVM_EL5U3_X86_64_PVM_4GB" on iSCSI device without a success.
Steps to reproduce:
1) /OVS is mounted as iSCSI block device
2) Original Oracle template is copied into /OVS/seed_pool/OVM_EL5U3_X86_64_PVM_4GB
3) Oracle VM Manager - Import template (no problem)
4) Oracle VM Manager - Create VM from template
Result: Files are copied into running_pool, vm.cfg is updated, new VM is visible in VM Manager but with this message:
failed: <Exception: Error updating the image.> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 471, in config_vm raise Exception("Error updating the image.")
5) Oracle VM Manager - Start new VM
Result:
Status in VM is Running
I can connect using VNC console
But the VM is constantly rebooting with these messages on the console:
Registering block device major 202
xvda: xvda1 xvda2 xvda3
xvda: p2 exceeds device capacity
xvda: p3 exceeds device capacity
Waiting for driver initialization.
xvda: rw=0, want=101530648, limit-12707414
attemp to access beyond end of device
switchroot: mount failed: No such file or directory
Kernel panic - not syncing: Attempted to kill init!
Looks like there is a problem with partition sizes within the VM image file (xvda: p2 exceeds device capacity)
I've tried to mount iSCSI formated with ocsf2 and ext3 - I'm getting the same error.
However there is no problem when I mount /OVS as NFS or local drive and repeat the steps above.
Any suggestion would be highly appreciated,
Honza

It's all sorted now.
What I've learnt: OVS/Xen hypervisor doesn't seem to handle 4kB iSCSI block sizes.
I had to change it to 512 bytes (configuration on the iSCSI storage - nothing on the Oracle VM side) and re-create all volumes.
Just in case you experience something similar.
Honza
Edited by: Honza on Jul 21, 2009 3:00 PM

Can't creat PDF from .DWG file

Using the world's most popular CAD program. Can't create a PDF from Adobe 3D. Apparently Adobe 3D wants to open the file using my AutoCAD, but thinks AutoCAD is not on my computer???

Hi SWS,
Didn't find it here, but found the answer by Googling and getting pointed to an AECBytes article from Feb '06, which had updated Revit 3D Capture settings (settings more updated than what Adobe gives you!).
It's too bad the rotation tool is so unweildy and that the walkthru isn't right there with rotation, pan & zoom (crazy - no idea why that is). I need these to work in Reader for regular people, not computer/cad savvy types. Adobe 3D seems to have just great potential, but doesn't seem ready for prime-time yet on the PDF recipient end yet. Maybe version 8 is more polished/joe-regular-user friendly (which is what it's billed as if it's for use in Reader.
Thanks again for your help.

Can't create system from par in Portal 7.3

Similar Messages

Maybe you are looking for