Can't create VSA Attributes in ACS 5.1

I have upgraded to ACS 5.1 inorder to use the RADIUS VSA feature that was added. I'm able to create the VSA Vendor object but get an error when creating the actual attributes. Therror states: This System Failure occured: {0}. Your changes have not been saved. Click OK to return to the list page. Does anyone else get this error?

Mine is a clean installation. Version is 5.1.0.44 (
Internal Build ID : B.2347)
Although I can't recreate, I do have a couple more suggestions to try:
- Enter a Vendor name as a single word (no spaces or other characters)
- There are two ways to navigate to the attributes page
1) System Administration > ... >
Configuration >
Dictionaries >
Protocols >
RADIUS >
RADIUS VSA and then select "Show Vendor Attributes"2) Clicking on name of vendor in left nav and then pressing "Create"
Suggest to try both ways of adding an attribute

Similar Messages

User orcladmin can't create new attribute?

I've just started some development with OID, have installed 10g pretty much plain vanilla without much changes, it's generally working.
However, I need to add an attribute (for example, "phoneextension"), so I run Oracle Directory Manager, navigate to Schema Management for the server in question, switch to the Attributes tab, pick one, do "Create Like", make the changes, but when I try to save it I get an error: "Modify failed... LDAP: error code 50 - Insufficient Access Rights".
I'm logged in as orcladmin. How do I provide this user with the correct rights? Or which user should I use?
(Note that orcladmin is the user indicated as the super user under "System Passwords".)
Thanks!

Okay... it appears (someone correct me if I'm wrong) that when you log in to Oracle Directory Manager, if you give the wrong password it still runs, and it looks like you're logged in as that user, but maybe you aren't?
I swear that's what just happened. Now I've logged in as orcladmin and I can create new attributes in the schema. Can someone confirm this?
Thanks

Dynamic create of attributes

Hello friends Can I create the attributes Dymanically and assign Values to it.
Ster

Not sure whether you have seen this document earlier..
If not look at this document & from page number 31 for dynamic field creation & binding.
[Dynamic Data biding|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/72d7ac11-0501-0010-63a2-cc6960569926]
Also [look at this thread|Dynamic Layout in BSP;
Raja

ACS User 'Create Date' Attribute?

Is there a 'create date' attribute for an ACS user? A typical question auditors will ask us for is a list of ACS/Remote access users created since 1st Jan 2010?
Thanks,
Brian

Jrabinow, thanks for your response. Was there supposed to be an screenshot of the ACS 5.1 user account? I'm testing out aaa-reports on trial basis currently. We're using ACS 4.1, obviously if there is no such attribute on our version, then we can't extract this information or report on it using a 3rd party tool.

Can i create more than one attributes for the custom class created using java API

Hello everyone,
I have been creating class and its attributes programatically using java APIs, I want to know that is there any way to create multipal attributs for the same class in just one call of API with all the options for each attributes,
thanks

You can create a new class and define all of the Attributes at the time the class is created - this is the preferred way of creating classes. Use the addAttributeDefinition() method on ClassObjectDefinition. If you need to add attributes to existing classes, you can only add them one at a time (using the addAttribute() method on ClassObject).
(dave)

Can´t create a date attribute for basic asset

Hi
I created a basic asset where I want to have a date attribute to pick up a date for calendar.
My question is: How can I create a date attribute for a basic asset? For what I understand I have to create an element attribute in my descriptor file like this
<PROPERTY NAME="imagedate" DESCRIPTION="Image date">
<STORAGE TYPE="TIMESTAMP" LENGTH="8"/>
<INPUTFORM TYPE="ELEMENT" WIDTH="24" MAXLENGTH="48" REQUIRED="NO" DEFAULT="" INSTRUCTION="Format: yyyy-mm-dd hh:mm"/>
<SEARCHFORM DESCRIPTION="Image date" TYPE="ELEMENT" WIDTH="48" MAXLENGTH="128"/>
</PROPERTY>
Then, when I create a new instance of this asset, this attribute appears with this error:
Date: Unable to find element OpenMarket/Xcelerate/AssetType/Oportunidade/ContentForm/imagedate
But the element (imagedate.xml) is there!!
I request help.

It seems that the table does not have the entries, maybe b/c we are on R3 4.7. Could you tell me what the entries are suppossed to be to allow the Asset and Cost Center lookup? The search does work for WBS element though and I don't see anything specific to WBS element in that table. In any case if you know the entries that would be great, also this table is not modifiable via SM30, here are the entries that I have in that table.
AUF_NETNR     PLM_HELPVALUES_AUTHCHECK
BU_PARTNER     BUPA_BAPI_F4_AUTHORITY
DAENR     PLM_HELPVALUES_AUTHCHECK
DOKNR     PLM_HELPVALUES_AUTHCHECK
EQUNR     PLM_HELPVALUES_AUTHCHECK
KUNNR     PARTNER_BAPI_F4_AUTHORITY
LIFNR     PARTNER_BAPI_F4_AUTHORITY
MATNR     PLM_HELPVALUES_AUTHCHECK
NW_AUFNR     PLM_HELPVALUES_AUTHCHECK
PARNR     PARTNER_BAPI_F4_AUTHORITY
PS_POSID     PLM_HELPVALUES_AUTHCHECK
PS_PSPID     PLM_HELPVALUES_AUTHCHECK
QMNUM     PLM_HELPVALUES_AUTHCHECK
S_AGNCYNUM     INT_FLBOOK_F4_AUTHORITY
S_AIRPORT     INT_FLBOOK_F4_AUTHORITY
S_BOOK_ID     INT_FLBOOK_F4_AUTHORITY
S_CARR_ID     INT_FLBOOK_F4_AUTHORITY
S_CITY     INT_FLBOOK_F4_AUTHORITY
S_CONN_ID     INT_FLBOOK_F4_AUTHORITY
S_COUNTNUM     INT_FLBOOK_F4_AUTHORITY
S_COUNTR     INT_FLBOOK_F4_AUTHORITY
S_CUSTOMER     INT_FLBOOK_F4_AUTHORITY
S_FLCONN     INT_FLBOOK_F4_AUTHORITY
S_FLCONN1     INT_FLBOOK_F4_AUTHORITY
S_FLCONN2     INT_FLBOOK_F4_AUTHORITY
S_PLANETYE     INT_FLBOOK_F4_AUTHORITY
S_TRNUM     INT_FLBOOK_F4_AUTHORITY
TPLNR     PLM_HELPVALUES_AUTHCHECK
USCOMP     SUSR_BAPI_F4_AUTHORITY
XUBNAME     SUSR_BAPI_F4_AUTHORITY

Can I create my own attributes in iDS?

I know to store my photo I can use the jpegPhoto attribute, but what about if I want to store other binary objects like maybe my fingerprints, can I create my own attributes for it, and how?
Or I can't do that?

You can use Directory Server Console to create new attributes. After adding new attributes to your schema, you must create a new object class to contain them.
Creating object class:
1.Click Create on the Object Classes tab.
2.Enter a unique name for the object class in the Name text box.
3.Enter an object identifier for the new object class in the OID (Optional) text box.
4.Select a parent object for the object class from the Parent drop-down menu.
5.To add an attribute that must be present in entries that use the new object class,highlight the attribute in the Available Attributes list and then click the Add
button to the left of the Required Attributes box.
6.To add an attribute that may be present in entries that use the new object class,highlight the attribute in the Available Attributes list and then click the Add
button to the left of the Allowed Attributes box.
7.To remove an attribute that you previously added, highlight the attribute in the Required Attributes list or the Allowed Attributes list and then click the
corresponding Remove button.You cannot remove either allowed or required attributes that are inherited
from the parent object classes.
8.Click to OK.
To create a new attribute:
1. Display the Attributes tab.
2. Click Create.
The Create Attribute dialog box is displayed.
3. Enter a unique name for the attribute in the Attribute Name text box.
4. Enter an object identifier for the attribute in the Attribute OID (Optional) text box.
5. Select a syntax that describes the data to be held by the attribute from the Syntax drop-down menu.
6. If you want the attribute to be multi-valued,select the Multi-Valued checkbox.The Directory Server allows more than one instance of a multi-valued attribute
per entry.
7.Click OK
This is repersenting binary data.
You can represent binary data, such as a JPEG image, in LDIF using one of the following methods:
The standard LDIF notation, the lesser than (<) symbol. For example:
jpegphoto: < file:/path/to/photo
If you use this standard notation, you do not need to specify the ldapmodify -b parameter. However, you must add the following line to the beginning of your LDIF file, or your LDIF update statements:
version:1
For example, you could use the following ldapmodify command:
prompt% ldapmodify -D userDN -w user_passwd
version: 1
dn: cn=Barney Fife,ou=People,dc=siroe,dc=comchangetype: modify
add: userCertificate
userCertificate;binary:< file: BarneysCert
Using base 64 encoding. You identify base 64 encoded data by using the ::
symbol. For example:
jpegPhoto:: encoded_data
In addition to binary data, other values that must be base 64-encoded include:
Any value that begins with a semicolon (;) or a space
Any value that contains non-ASCII data, including new lines Use the ldif command-line utility with the -b parameter to convert binary data to LDIF format:
ldif -b attribute_name
where attribute_name is the name of the attribute to which you are supplying the binary data. The binary data is read from standard input and the results are written to standard output. Thus, you should use redirection operators to select input and output files.
The ldif command-line utility will take any input and format it with the correct line continuation and appropriate attribute information. The ldif utility also assesses whether the input requires base 64 encoding. For example:
ldif -b jpegPhoto < mark.jpg > out.ldif
This example takes a binary file containing a JPEG-formatted image and converts it into LDIF format for the attribute named jpegPhoto. The output is saved to
out.ldif.
The -b option specifies that the ldif utility should interpret the entire input as a single binary value. If -b is not present, each line is considered to be a separate input value.

What is compounding attributes?how can i create it.?

what is compounding attributes?how can i create it.?

Hi,
when you need additional on\bject to identify each records in master data table....ie a new key in the table...then you go for compounding...so if 24 is the value of A when it is with B then you cmpound B with A.
Just go the compounding option in the infoobject and add this object
thats all !
Thanks

802.1x with dACL - invalid attribute prefix: "ACS"

Dear All,
I've spent half a day traying to solve this without success, I hope you could help me.
I've configured a simple 802.1x solution on a pilot PC that have to authenticate via PEAP-MSCHAPv2 users against my ACS Internal User database.
Switch version:
Model number : WS-C3750V2-48PS-S
Software: c3750-ipbasek9-mz.122-52.SE.bin
ACS:
C1121 with version 5.3.0.40
The problem occurs when the ACS sends within the Authentication-Accept radius packet the following attribute:
cisco-av-pair=ACS:CiscoSecure-Defined-ACL=#ACSACL#-IP-AUTH-4eb90704
At the switch side I see the following debug log:
002558: Nov 8 14:31:35.586: %AUTHMGR-5-START: Starting 'dot1x' for client (0022.680b.da7b) on Interface Fa1/0/1 AuditSessionID AC1FFE4E0000003105BCDE19
002559: Nov 8 14:31:35.703: AAA/ATTR: invalid attribute prefix: "ACS"
002560: Nov 8 14:31:35.703: %DOT1X-5-FAIL: Authentication failed for client (0022.680b.da7b) on Interface Fa1/0/1 AuditSessionID AC1FFE4E0000003105BCDE19
002561: Nov 8 14:31:35.703: %AUTHMGR-7-RESULT: Authentication result 'server dead' from 'dot1x' for client (0022.680b.da7b) on Interface Fa1/0/1 AuditSessionID AC1FFE4E0000003105BCDE19
802.1x switch related config:
GLOBAL:
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa accounting dot1x default start-stop group radius
radius-server host 172.31.254.140 auth-port 1645 acct-port 1646
radius-server host 172.31.254.141 auth-port 1645 acct-port 1646
radius-server key 7 123415ASFASFAS55512
radius-server vsa send accounting
radius-server vsa send authentication
ip device tracking
ip access-list extended DEFAULT-ANY
permit ip any any
PORT SPECIFIC
interface FastEthernet1/0/1
description 802.1x Template Port
switchport access vlan 244
switchport mode access
ip access-group DEFAULT-ANY in
authentication event fail action next-method
authentication open
authentication priority dot1x mab
authentication port-control auto
authentication periodic
mab
dot1x pae authenticator
dot1x timeout tx-period 10
end
The authentication at ACS side is successfully completed but for some reason the switch cannot understand the attribute sent to him by the ACS:
Why the authentication results in 'server-dead' ?
I've hereby attached the authorization profile, the downlodable ACL and the RADIUS authentication detail for the request...
Any idea?
Thanks a lot!

Yes, I came across the same issue and ended up as a bug with the 3750
CSCtj28883 dACL attribute parsing failed when 'aaa author' debug turned ON
description is
DACL processing fails when the following debugging parameters are turned on.
1. debug aaa attr
2. debug aaa authorization
The same works fine when they are turned down. Attaching the switch log.
I believe was resolved in version 3750-Build 12.2(55) as from the following note attached to the bug since was found to be unreproducable on later builds
Submitter has confirmed that the bug is not seen on 55SE image.
The issue is only seen in 53SE
can also try and switch debugs off

Double-click to create method/attribute in EHP2 Netweaver 7.0 does not work

Hi,
this makes me wonder:
I'm used to create new attributes or methods by simply double-clicking the new name and the system will ask me to create. Now I am new in EHP2 and for methods it just says 'wrong cursor position or object not in navigation', for attributes system just does not show any reaction.
Please help me as it is really annoying always to create things from object tree or class header.
What is it I do not see?
Thanks so much.
Clemens

Hi,
sorry I thought it was clear: I try in the new ABAP front end editor - accessed through SE80, SE24, SE38 and anay transaction that allows you to edit code (except lousy things like the enhancement spot implementation code window).
An it is still the same: In a report, I can write perform xyz and double-click will asjk me to create a form. Just in oo context, attributes and methods should be the same - as it was since ECC600 or even before on 46C. Except our current system I don't know anyone working on EHP2 for Netweaver 7.
EHP2 just another undeclared untested Beta-Version?
I can't believe.
Regards,
Clemens

How can I create a sample with the Flex data?

Hi mates, I'm thinking about doing some stutter vocals with the ultrabeat so I've got a vocal and I have flexed it in time so it fits well on the song's tempo, the problem is that when I create an audio file of the part of the vocal I want to use on my ultrabeat, it creates an audio file that's not fitted in time.
How can I create the audio file fitted in time?with the flex info?
Thanks so much!

psikonetik wrote:
How can I create the audio file fitted in time?with the flex info?
You need to create Apple Loop, REX etc.
For example select the region that you have already flexed, right click ->Bounce Merge->Bounce Inplace. I will create a new audio track with the bounced Flex work.
Select the new region and go to Audio menu ->Open in Apple Loop Utility and check "Loop" and other attributes to create an Apple Loop. Save the Apple Loop and close the utility. It's expected that the Apple Loop aif must be created in your Project path folder or have a look at the Audio Bin in Logic where is the aif path.
Drug the Apple Loop in the Arrange audio track ( or it will create one ) and operate with any tempos.
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

How can i add custom attributes to a new Class Object using the API ?

Hello everyone,
Here is my problem. I just created a subclass of Document using the API (not XML), by creating a ClassObjectDefinition and a ClassObject. Here is the code :
// doc is an instance of Document
ClassObject co = doc.getClassObject();
ClassObjectDefinition cod = new ClassObjectDefinition(ifsSession);
cod.setSuperclass(co);
cod.setSuperclassName(co.getName());
cod.setName("MYDocument");
ClassObject c = (ClassObject)ifsSession.createSchemaObject(cod);
Everything seems to be OK since i can see the new class when i use ifsmgr. But my question is : how can i add custom attributes to this new class ? Here is what i tried :
AttributeDefinition value = new AttributeDefinition(ifsSession);
value.setAttribute("FOO", AttributeValue.newAttributeValue("bar"));
c.addAttribute(value);
But i got the following error message :
oracle.ifs.common.IfsException: IFS-30002: Unable to create new LibraryObject
java.sql.SQLException: ORA-01400: impossible d'insirer NULL dans ("IFSSYS"."ODM_ATTRIBUTE"."DATATYPE")
oracle.ifs.server.S_LibraryObjectData oracle.ifs.beans.LibrarySession.DMNewSchemaObject(oracle.ifs.server.S_LibraryObjectDefinition)
oracle.ifs.beans.SchemaObject oracle.ifs.beans.LibrarySession.NewSchemaObject(oracle.ifs.beans.SchemaObjectDefinition)
oracle.ifs.beans.SchemaObject oracle.ifs.beans.LibrarySession.createSchemaObject(oracle.ifs.beans.SchemaObjectDefinition)
void fr.sword.ifs.GestionDocument.IFSDocument.createDocument(java.lang.String)
void fr.sword.ifs.GestionDocument.IFSDocument.main(java.lang.String[])
So, what am i doing wrong ?
More generally, are we restricted in the types of the attributes ? (for example, would it be possible to add an attribute that would be an inputStream ? Or an object that i have already created ?).
Any help would be appreciated. Thanks in advance.
Guillaume
PS : i'm using Oracle iFS 1.1.9 on NT4 SP6 and Oracle 8.1.7
null

Hi Guillaume,
you're welcome. Don't know exactly, but assume that ATTRIBUTEDATATYPE_UNKNOWN
is used to check for erronous cases only
and it shouldn't be used otherwise.
Creating your own objects could be simply done via
ClassObject ifsClassObject;
DocumentDefinition ifsDocDef = new DocumentDefinition(ifsSession);
// get class object for my very own document
ifsClassObject = ClassObject.getClassObjectFromLabel(ifsSession, "MYDOCUMENT");
// set the class for the document i'd like to create
ifsDocDef.setClassObject(ifsClassObject);
// set attributes and content for the document...
ifsDocDef.setAttribute("MYFOO_ATTRIBUTE",....);
ifsDocDef.setContent("This is the content of my document");
// create the document...
PublicObject doc = ifsSession.createPublicObject(ifsDocDef);
null

Can I create a BI Beans compliant cube using OWB?

Can I create a cube that I can browse using BI beans through OWB 9.0.4 or are there additional steps that I need to take using other tools such as Enterprise manager?
Are there any known incompatibilities between OWB 9.0.4 and BI beans 9.03.1.?
I will also pose this question in the BI Beans forum.
Thanks for any replies.
Cor

Hi,
I am trying to build an Analytic workspace using OWB (9.0.4.8) Transfer Brigde and I got the similar error.
None of the view/mv sqls are generated and the analytic workspace was not created either.
FYI.
**! Transfer logging started at Wed May 14 18:07:41 EDT 2003 !**
OWB Bridge processed arguments
Default local= en_US
Exporting project:OM_SAMPLE
initializing project:OM_SAMPLE
Initializing module :WH
Exporting cube:SALES
Exporting dimension:CHANNELS
Exporting dimension:COUNTRIES
Exporting dimension:CUSTOMERS
Exporting dimension:PRODUCTS
Exporting mappings
Exporting table:CHANNELS
Exporting table:COUNTRIES
Exporting table:CUSTOMERS
Exporting table:PRODUCTS
Exporting table:SALES
Exporting datatypes
Exporting project OM_SAMPLE complete.
setting parameter: olapimp.deploytoaw = Y
setting parameter: olapimp.awname = OWBTARDEMO
setting parameter: olapimp.awobjprefix = OWBTAR_
setting parameter: olapimp.awuser =
setting parameter: olapimp.createviews = Y
setting parameter: olapimp.viewprefix = OWBTAR_
setting parameter: olapimp.viewaccesstype = OLAP
setting parameter: olapimp.creatematviews = Y
setting parameter: olapimp.viewscriptdir = /opt/oracle
setting parameter: olapimp.deploy = N
setting parameter: olapimp.username = OLAPSYS
setting parameter: olapimp.password = manager
setting parameter: olapimp.host = 10.215.79.139
setting parameter: olapimp.port = 1521
setting parameter: olapimp.sid = INDEXDB
setting parameter: olapimp.inputfilename = C:\TEMP\bridges\null-nullMy_Metadata_Transfer1052950061353.XMI
setting parameter: olapimp.outputfilename = C:\Panneer\owbtardemo.sql
Loading Metadata
Loading XMI input file
processing dim: CHANNELS
processing level: CHANNELin dimension CHANNELS
processing level attribute use: CHL_ID in level CHANNEL for level attribute ID
processing level attribute : ID in level CHANNEL
processing level attribute use: CHL_LLABEL in level CHANNEL for level attribute LLABEL
processing level attribute : LLABEL in level CHANNEL
processing level attribute use: CHL_SLABEL in level CHANNEL for level attribute SLABEL
processing level attribute : SLABEL in level CHANNEL
processing level: CLASSin dimension CHANNELS
processing level attribute use: CLS_ID in level CLASS for level attribute ID
processing level attribute : ID in level CLASS
processing level attribute use: CLS_LLABEL in level CLASS for level attribute LLABEL
processing level attribute : LLABEL in level CLASS
processing level attribute use: CLS_SLABEL in level CLASS for level attribute SLABEL
processing level attribute : SLABEL in level CLASS
processing hierarchy: CHANNEL_HIERARCHY in dimension CHANNELS
processing dim: COUNTRIES
processing level: REGIONin dimension COUNTRIES
processing level attribute use: RGN_ID in level REGION for level attribute ID
processing level attribute : ID in level REGION
processing level attribute use: RGN_LLABEL in level REGION for level attribute LLABEL
processing level attribute : LLABEL in level REGION
processing level attribute use: RGN_SLABEL in level REGION for level attribute SLABEL
processing level attribute : SLABEL in level REGION
processing level: COUNTRYin dimension COUNTRIES
processing level attribute use: CTY_ID in level COUNTRY for level attribute ID
processing level attribute : ID in level COUNTRY
processing level attribute use: CTY_LLABEL in level COUNTRY for level attribute LLABEL
processing level attribute : LLABEL in level COUNTRY
processing level attribute use: CTY_SLABEL in level COUNTRY for level attribute SLABEL
processing level attribute : SLABEL in level COUNTRY
processing hierarchy: COUNTRY_HIERARCHY in dimension COUNTRIES
processing dim: CUSTOMERS
processing level: CUSTOMERin dimension CUSTOMERS
processing level attribute use: CTR_CREDIT_LIMIT in level CUSTOMER for level attribute CREDIT_LIMIT
processing level attribute : CREDIT_LIMIT in level CUSTOMER
processing level attribute use: CTR_EMAIL in level CUSTOMER for level attribute EMAIL
processing level attribute : EMAIL in level CUSTOMER
processing level attribute use: CTR_ID in level CUSTOMER for level attribute ID
processing level attribute : ID in level CUSTOMER
processing level attribute use: CTR_NAME in level CUSTOMER for level attribute NAME
processing level attribute : NAME in level CUSTOMER
processing dim: PRODUCTS
processing level: PRODUCTin dimension PRODUCTS
processing level attribute use: PDT_DESCRIPTION in level PRODUCT for level attribute DESCRIPTION
processing level attribute : DESCRIPTION in level PRODUCT
processing level attribute use: PDT_ID in level PRODUCT for level attribute ID
processing level attribute : ID in level PRODUCT
processing level attribute use: PDT_LIST_PRICE in level PRODUCT for level attribute LIST_PRICE
processing level attribute : LIST_PRICE in level PRODUCT
processing level attribute use: PDT_MIN_PRICE in level PRODUCT for level attribute MIN_PRICE
processing level attribute : MIN_PRICE in level PRODUCT
processing level attribute use: PDT_NAME in level PRODUCT for level attribute NAME
processing level attribute : NAME in level PRODUCT
processing level: CATEGORYin dimension PRODUCTS
processing level attribute use: CTY_ID in level CATEGORY for level attribute ID
processing level attribute : ID in level CATEGORY
processing level attribute use: CTY_LLABEL in level CATEGORY for level attribute LLABEL
processing level attribute : LLABEL in level CATEGORY
processing level attribute use: CTY_SLABEL in level CATEGORY for level attribute SLABEL
processing level attribute : SLABEL in level CATEGORY
processing hierarchy: PRODUCT_HIERARCHY in dimension PRODUCTS
processing cube: SALES
processing classification type is := Warehouse Builder Business Area
processing catalog name := SALESCOLLECTION ,and description is := null
processing catalog entry element name := SALES
processing Cube
processing catalog entity cube := SALES
processing measure := COSTS , in a cube := SALES
processing measure := SALES , in a cube := SALES
processing catalog entry element name := CHANNELS
processing catalog entry element name := COUNTRIES
processing catalog entry element name := CUSTOMERS
processing catalog entry element name := PRODUCTS
processing catalog entry element name := CHANNELS
Class Name CHANNELS is TableImpl@405ffd not supported
processing catalog entry element name := COUNTRIES
Class Name COUNTRIES is TableImpl@5e1b8a not supported
processing catalog entry element name := CUSTOMERS
Class Name CUSTOMERS is TableImpl@6232b5 not supported
processing catalog entry element name := PRODUCTS
Class Name PRODUCTS is TableImpl@6f144c not supported
processing catalog entry element name := SALES
Class Name SALES is TableImpl@14013 not supported
processing classification type is := Dimensional Attribute Descriptor
Classification type Dimensional Attribute Descriptor is not supported
closing output file
closing log stream
**! Transfer process 2 of 2 completed with status = 0 !**
**! Transfer logging stopped at Wed May 14 18:07:47 EDT 2003 !**
But when I ran the "select * from dba_registry" everything seems to be valid.
CATALOG     Oracle9i Catalog Views     9.2.0.2.0     VALID     24-APR-2003 09:39:24     SYS     SYS     DBMS_REGISTRY_SYS.VALIDATE_CATALOG
CATPROC     Oracle9i Packages and Types     9.2.0.2.0     VALID     24-APR-2003 09:39:24     SYS     SYS     DBMS_REGISTRY_SYS.VALIDATE_CATPROC
OWM     Oracle Workspace Manager     9.2.0.1.0     VALID     24-APR-2003 09:39:27     SYS     WMSYS     OWM_VALIDATE
JAVAVM     JServer JAVA Virtual Machine     9.2.0.2.0     VALID     23-APR-2003 22:19:09     SYS     SYS     [NULL]
XML     Oracle XDK for Java     9.2.0.2.0     VALID     24-APR-2003 09:39:32     SYS     SYS     XMLVALIDATE
CATJAVA     Oracle9i Java Packages     9.2.0.2.0     VALID     24-APR-2003 09:39:32     SYS     SYS     DBMS_REGISTRY_SYS.VALIDATE_CATJAVA
ORDIM     Oracle interMedia     9.2.0.2.0     LOADED     23-APR-2003 23:16:42     SYS     SYS     [NULL]
SDO     Spatial     9.2.0.2.0     LOADED     23-APR-2003 23:17:06     SYS     MDSYS     [NULL]
CONTEXT     Oracle Text     9.2.0.2.0     VALID     23-APR-2003 23:17:26     SYS     SYS     [NULL]
XDB     Oracle XML Database     9.2.0.2.0     VALID     24-APR-2003 09:39:39     SYS     XDB     DBMS_REGXDB.VALIDATEXDB
WK     Oracle Ultra Search     9.2.0.2.0     VALID     24-APR-2003 09:39:42     SYS     WKSYS     WK_UTIL.VALID
OLS     Oracle Label Security     9.2.0.2.0     VALID     24-APR-2003 09:39:43     SYS     LBACSYS     LBAC_UTL.VALIDATE
ODM     Oracle Data Mining     9.2.0.1.0     LOADED     12-MAY-2002 17:59:03     SYS     ODM     [NULL]
APS     OLAP Analytic Workspace     9.2.0.2.0     LOADED     23-APR-2003 22:49:51     SYS     SYS     [NULL]
XOQ     Oracle OLAP API     9.2.0.2.0     LOADED     23-APR-2003 22:51:49     SYS     SYS     [NULL]
AMD     OLAP Catalog     9.2.0.2.0     VALID     02-MAY-2003 15:00:13     SYS     OLAPSYS     CWM2_OLAP_INSTALLER.VALIDATE_CWM2_INSTALL
Your help is appreciated!
Thanks
Panneer

All the steps involved in creating user attributes

where is it documented on how to create user attributes that are stored in the ldap?
I created a jspprovider channel, and I can get data out of the user attributes in the samplecontent.jsp by:
JSPProvider p = (JSPProvider)pageContext.getAttribute("JSPProvider");
SSOTokenManager mgr = SSOTokenManager.getInstance();
SSOToken token = mgr.createSSOToken(request);
AMStoreConnection dpc = new AMStoreConnection(token);
String name = token.getPrincipal().getName();
AMUser user = dpc.getUser(name);
Map attMap = user.getAttributes();
Collection valueCollection = attMap.values();
Iterator valueIterator = valueCollection.iterator();
int iSize = attMap.size();
Set attKeySet = attMap.keySet();
Iterator keyIterator = attKeySet.iterator();
and then iterate through to display them all.
I then tried to store a value using the sampledoedit.jsp file:
JSPProvider p = (JSPProvider)pageContext.getAttribute("JSPProvider");
SSOTokenManager mgr = SSOTokenManager.getInstance();
SSOToken token = mgr.createSSOToken(request);
AMStoreConnection dpc = new AMStoreConnection(token);
String name = token.getPrincipal().getName();
AMUser user = dpc.getUser(name);
String aname = request.getParameter("attributeName");
Object aval = request.getParameter("attributeValue");
HashMap attMap = new HashMap();
attMap.put(aname,aval);
user.setAttributes(attMap);
user.store(true);
response.sendRedirect((String)pageContext.getAttribute("url"));
For whatever reason, I get an error, and in the debug I just get couldn't set attributes.
Then, when I try to retreive the list of attributes, the new name/value pair is created, but the value is blank.....
Any ideas? Or a link on a step by step process on how to create user attributes?

BTW, here is the error I get in the debug log:
01/06/2005 12:43:47:232 PM AST: Thread[service-j2ee,5,main]
ERROR: DesktopServlet.handleException()
com.sun.portal.providers.ProviderException: JSPProvider.processJSPFile(): jsp=doedit.jsp, com.sun.portal.providers.ProviderException: JSPProvider.processJSPFile(): jsp=sampledoedit.jsp, com.iplanet.am.sdk.AMException: Unable to set attribute(s) com.sun.portal.desktop.taglib.DesktopTaglibException: JSPProvider.processJSPFile(): jsp=sampledoedit.jsp,
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:880)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:777)
at com.sun.portal.providers.jsp.JSPProvider.processEdit(JSPProvider.java:673)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:644)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:320)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)
com.sun.portal.providers.ProviderException: JSPProvider.processJSPFile(): jsp=sampledoedit.jsp, com.iplanet.am.sdk.AMException: Unable to set attribute(s) com.sun.portal.desktop.taglib.DesktopTaglibException: JSPProvider.processJSPFile(): jsp=sampledoedit.jsp,
at com.sun.portal.desktop.taglib.provider.ProcessEditTag.doStartTag(ProcessEditTag.java:28)
at jsps.etc._opt._SUNWps._desktop._AnyWarePortal_en_CA._JSPEditContainer._html._doedit_jsp._jspService(_doedit_jsp.java:193)
at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:863)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:777)
at com.sun.portal.providers.jsp.JSPProvider.processEdit(JSPProvider.java:673)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:644)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:320)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)
com.sun.portal.providers.ProviderException: JSPProvider.processJSPFile(): jsp=sampledoedit.jsp, com.iplanet.am.sdk.AMException: Unable to set attribute(s)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:880)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:777)
at com.sun.portal.providers.jsp.JSPProvider.processEdit(JSPProvider.java:673)
at com.sun.portal.desktop.taglib.provider.ProcessEditTag.doStartTag(ProcessEditTag.java:26)
at jsps.etc._opt._SUNWps._desktop._AnyWarePortal_en_CA._JSPEditContainer._html._doedit_jsp._jspService(_doedit_jsp.java:193)
at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:863)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:777)
at com.sun.portal.providers.jsp.JSPProvider.processEdit(JSPProvider.java:673)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:644)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:320)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)
com.iplanet.am.sdk.AMException: Unable to set attribute(s)
at com.iplanet.am.sdk.AMDirectoryManager.processInternalException(AMDirectoryManager.java:247)
at com.iplanet.am.sdk.AMDirectoryManager.setAttributes(AMDirectoryManager.java:2151)
at com.iplanet.am.sdk.AMCacheManager.setAttributes(AMCacheManager.java:867)
at com.iplanet.am.sdk.AMObjectImpl.store(AMObjectImpl.java:1573)
at jsps.etc._opt._SUNWps._desktop._AnyWarePortal_en_CA._WebFolders._html._sampledoedit_jsp._jspService(_sampledoedit_jsp.java:118)
at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:863)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:777)
at com.sun.portal.providers.jsp.JSPProvider.processEdit(JSPProvider.java:673)
at com.sun.portal.desktop.taglib.provider.ProcessEditTag.doStartTag(ProcessEditTag.java:26)
at jsps.etc._opt._SUNWps._desktop._AnyWarePortal_en_CA._JSPEditContainer._html._doedit_jsp._jspService(_doedit_jsp.java:193)
at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:863)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:777)
at com.sun.portal.providers.jsp.JSPProvider.processEdit(JSPProvider.java:673)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:644)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:320)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)

In Which table can I get Customize attribute values?

Hi All,
I am new to Solution Manager. I have created customize attributes using std and non std ways. And i have used this attributes for create interface scenarios.
My problem is, I am not able to get the value of attributes which has created using standard way. From which table I can get.
While create this std attributes, i have added customize table name and corresponding field name in attribute properties.
Can I get the attributes from this customize table?
Kindly any one help for me.
Thanks in Advance.
-Thulasi

Hi tulsi,
I am also looking for the same solution please update me or the thread with the solution
Saurabh

Can't create VSA Attributes in ACS 5.1

Similar Messages

Maybe you are looking for